Hard drive: WDC WD5000BPVT-75HXZT3 Module of Test targeted reading could not start

Similar Questions

• After installing the new hard drive and using recovery discs, I get this message could not start because the following file is m issing or damaged system32\drivers\pci.sys

  I just replaced my hard drive with a new because the other HD said imminent failure or something like that! Basically the hard drive was about to fail and I so now the new one installed and I used my recovery disks and all seemed well until the recovery disks have been completed and the computer says to get out them. Then the computer restarted several times and then I get this message:
  Windows cannot start because missing or corrupt the system 32\drivers\pci.sys
  Then he said: "you can try to repair this file by starting windows setup using the original configuration of the CD-ROM.
  Select 'R' in the first screen to start repair.
  one of the many questions I have is that CD-ROMs are talking? It is the recovery disk, they want me to or what? also if you know a CV or another page which includes help on this specific topic would also help! Thank you
  also, I can still use the old drive hard when it is installed on my laptop!
  HP pavilion dv5220us running windows xp
  I had advanced care system that had a top registry Fixer and I got ccleaner as well on the computer
  internet security Norton 2011

  Hello panjok2,

  Sometimes recovery CD are dependent on the architecture of a hard drive.  If it is different from the original disc, then we have problems.

  In this case, the best thing you could do is contact HP and see if this is the case.  If it is not why this happens, they should be able to help you as well because they are the ultimate authority on their recovery process.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• Backup on an external hard drive, the error code 0 x 81000019 a snapshot could not be created. Pls chk "vss" and "spp" application event logs.

  A snapshot could not be created. Please check the spp and 'vss' ' applications for more information event logs.

  Details: Insufficient storage available to create the shadow copy storage file or other shadow copy data. Error code 0 x 81000019.

  The size of the external drive is free to Go 465,65 Go 465,75. Also "size of the backups is not available" is displayed under the size of the disk in GB. The size of the backup copy is 57 GB.

  Event logs see the backup error event ID 521

  GENRAL:
  Save the operation which started at 2010-03-11 T 13: 41:53 failed because the service operation volume shadow copy to create a shadow copy of the volume during backup failed with the error code 2155348249.

  Details:
  + System
  -event data
  backup time 2010-03 - 11 t 13: 41:53.466000000Z
  Error code 2155348249
  Error Mssg % 2155348249

  Hi Gilles Pelletier,.

  1. check the shadow copy Volume service in the services window. Use the following steps to check:

  i. click on start and type services.msc in the search box

  II. the search for the shadow copy Volume service

  Please let us know the status and startup type. Make sure that the startup type is automatic

  Steps to set the auto services

  i. search for the service

  II. right-click on the service

  III. If the service is stopped and then starts the service

  IV. Select Properties

  v. and in startup type, select automatic

  2 disable the firewall / anti-virus temporarily installed on your computer and then check if the problem still persists. If the problem is resolved, you will need to uninstall the software and reinstall it back or change the settings and check.

  3. even check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Check this link which has the similar problem: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/9b18bc73-26e5-4b28-819f-11628ebbf5e2

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I unwittingly compressed my hard drive to save space. I didn't know that it starts not after that.

  * Original title: Windows Vista, version 1996

  I unwittingly compressed my hard drive to save space. I didn't know that it starts not after that. Restarting the PC, how can I unpack my hard drive to allow it to boot this drive?

  UM Vista came out in 2007, so there is no version of 1996.  If you have the Vista DVD, you can start since that launch a command prompt and run the command to unpack here.

  It's been almost a decade I ran Vista and I do not know the command to compress (or decompress) from a prompt command in Vista

  It should be the same for vista

  https://TechNet.Microsoft.com/en-us/library/bb490884.aspx?f=255&MSPPError=-2147217396

• I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I don't understand. What makes you think the reader 'is not compatible' with Windows 7? Windows (or any other OS besides) sees no external hard drives as "compatible" or not...

  Now if you have a PROPRIETARY disk, then that is a different case. If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• NEW HARD DRIVE DOESN'T HAVE A SEATOOLS TEST

  I posted the 3/22 on having missing NTLDR. Joel suggested the Seatools and it turned out to be a bad hard drive. Replaces and I tried recovery with a set of newly purchased recovery disks. Recovery did not work, I was told I needed work for drives cd-rom drive to work. Just put in the new rom but the recovery still does not work. It says it's from recovery, but does nothing. Very quiet PC and no action on the drive light. I tried the Seatools and it failed the short test. I don't know if it's software/driver error or pilot error.

  Hi Joel,

  Sorry for the confusion. Re-reading the post looks that I speak in square circles. I was on my way to the door when I decided to make the post, just got back. The disk set is new. I got it computer surgeons, a third-party provider, exclusively for HP/Compaq recovery kits. I got for them through HP. HP initially sent me the wrong set, when I contacted them on this matter, they said that they no longer have the number build for my pc.  The guy at computer surgeons is one that says that I need a cd rom to work to perform a recovery, the multi media player would not work. It always seems strange to me. I did the Seatools test you advised on the first HARD disk, I had and he failed. The place where I had sent me another. He said that he would go several tests on her before shipment to make sure it was ok, and if I still had a problem it was probably the discs. I got this drive yesterday and it included the results of Seatools test with it. After installing it I ran again the Seatools. I wanted to make sure it was ok before I did anything. If something went wrong, I knew that I could not blame the HARD drive. Hope this clears it a bit for you.

  UPDATE: HANG THE FLAG! Issued either solved!  I tried the recovery discs again but this time I hit retry on two mistakes, that I continue to do - cannot recover, recover Windows 32 and couldnot, creator of tools. I gave up after several retrys who kept popping up but has not left the installation. I am in the process now of to update and delete.

• DELL XPS 8900 Win 7 Pro - Test RANDOM SEEK - Module could not start

  I was running the Dell Diagnostics, hardware to test and got this message for 2 hard drives

  Anyone know what that really means?

  Thank you

  Yannis

  Hello Yannis,

  Thanks for posting.

  What PC-Doctor team has found here is that on a system with this number of readers, when tests try to load at the same time we are CPU load and memory stress test, load prevents the modules load on all drives before hitting the timeouts.

  I hope this helps.

  Kind regards
  Robert

• Could not start, laptop computer, disk hard short DTS test failed

  I am currently not able to start my laptop properly. I have a HP Pavillion G6.

  When I start it, it stays on the screen with the HP logo and a black background for awhile and eventually get to a black screen with the cursor visible and mobile, but unable to do anything else.

  I tried to press F11 at startup to restore the factory settings, the system recognizes the key but leads straight to a black screen that I left it for several hours, but nothing happens.

  I have gone on the menu of system diagnostics and run a quick test that revealed the Hard Drive DST short, Check failed.

  Will I need a new hard drive? Or is it possible to fix it?

  If I need a new, where can I get one from?

  Thanks for any help

  Hello

  The short drive Self Test (DST) failure would indicate that hard is defective and must be replaced.  This is also consistent with recovery and startup problems you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and your notebook series g6 Nr - see here for an explanation.

  Kind regards

  DP - K

• Replacing the hard drive on my Pavilion dv6 - 3150ee but the bios is not recognize it.

  Hello

  I have a HP Pavilion dv6-3150ee. my original hard drive was broken. I bought a western digital 500 GB 5400 Sata 2.

  I installed the hard drive and made the recovery. Everything went well past and ok. When completed recovery operation, the system has restarted to continue the installation of hard drives but I got this message: no boot device insert boot disk and press any key.

  so I went to the bios and tested the memory and the hard drive and all was ok. I tried to get into my bios, advanced options, but it isn't everything. My bios version is F.12.

  I don't know what the problem is, and I will be thanksful for any help.

  N.B: I have my recovery discs and my windows repair disc.

  Thank you.

  The new hard drive sometimes requires to prepare first with utility cd from Cyberlink. Download and save the file. Once the download is complete, place a blank cd in your drive and click on the file to create a boot cd. Start with this cd and wait until you get a green check mark indicates the hard disk is ready. Remove the cd, insert the first disc of recovery and restart the laptop.

  http://ftp.HP.com/pub/softlib/software11/COL32372/PV-80183-1/sp44645.exe

• My internal hard drive is shown in green, but none of the folders not displayed

  I'm a Mac user running Lightroom on an iMac 27 inch 5K.  Today when I open Lightroom I don't see a folder on my internal hard drive (well, all except 1 are missing).  The hard drive led shows that it is online and I can see all folders on this drive when I right click on the use of the hard drive option 'show in finder '.  In addition, when I go to the Library tab and try to open a new import from missing files, program gray out all the photos, which indicates they are duplicates.  I tried restarting the computer and even tried to reboot from a saved version of the library, but no change.

  One thing that happened last night is, according to recalibrate my monitor, Lightroom entered a State "not responding" (frozen) and I had no choice but to the force it to quit.  In my view, this morning was the first time I've had reopened Lightroom.  Of course, this may have been the cause, but I can't understand how to force the system to re - acquire records and photos from hard disk it recognizes.

  I have not knowingly ordered to use the external drive.  However, the names of files and folders on external drives names are identical to those on the internal drive.  Pourrait lightroom is confusing both to avoid showing duplicates?  If not, I don't always know not why my folder structure on the internal drive does not appear.

  Lightroom is only what you tell it to do. If she uses the pictures on your external drive, you must have instructed Lightroom to do this.

  Lightroom is not a file Explorer. Simply because you have folders with pictures on your internal drive, Lightroom will not display it in the library Module. It displays only records that contain the imported photos.

  In addition, there are a few unique folders on my internal drive that do not exist on the outside.  Are also not showing.  For me this means there may be a greater their.

  As noted above, they did not show because there is no photos imported into Lightroom these records.

• Since I downloaded El Capitan I think I can't paste it into my external hard drive.  I use to download my card reader, copy it, and then download to a new folder on the external drive.  It will not work now and nor can I create new folders on the hard dr

  I used to download pictures from a card reader, copy them, and then stick it on my external hard drive.  Since El Capitan of download, it does not work - I can download and copy, but can not stick to the external hard drive.  I can't set up the files on the external hard drive either.  However, I can download what is already on the external hard drive without any problem.

  How the external drive is formatted?

• I want to copy all my jpg files to another directory (a portable hard drive) with some of the same names of JPGs, but not necessarily all. What will happen? The word 'COPY', will be some of the deleted files be added or nothing at all.

  I have a LOT of pictures in my computer (over a thousand) and I want to put them on a portable hard drive, I bought (1 terabyte) but I won't write any of the names of existing files with different images. IS THIS POSSIBLE? Do I need software or special hardware? I tried the copy/paste standard as well as move files to the new directory, but it seems that I can lose files. I'm not sure if the files that are missing (or lack, in my opinion) are not copied. When I finished emptying the directory, it shows that it is empty but the new directory does not seem to have any additional files that should be there based on the counting of the files before and after.

  Thanks for any help you can provide, Bill

  1: right-click and then drag the pix on the external drive. Release the right mouse button and choose copy here. They are there?  Now remove it from the computer.

  2: you can see pix of the same name overwrite each other, or be done with (1), (2), etc.. But even in this case, they will be interspersed with the former. If keep you them in separate folders with different names, that should not happen. Personally, I rename all the pix before storing them. You can select the set instead of the code of the camera and a group, rename the first holiday 2009 yo and the rest will be renamed holiday 2009 and each havf will one (1), (2), (3), after them.

  It is also a nice freeware tool which, among other things, can rename a group of photos easily.

  FastStone Image Viewer
  http://www.FastStone.org/

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• New hard drive - I need to recharge the HP software and do not have the disks - ENVY 14-1002TX

  My hard drive has failed.

  I don't have the card that came with my laptop.

  The significant difference between now and before is my sound buttons (volume up and down) do not work, and the quality of the sound is really bad.

  I downloaded HP support assistant, but he was not able to help me. I searched the forum and I have not been able to find anything.

  Help, please!

  Hello

  For your laptop, all downloads of software and driver available from HP are on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4207217#n222

  Note: On the sound issue you mention, first download and install the Chipset driver below.

  Chipset Driver - Windows 7.

  One when you're done, restart the computer, and then download and install the IDT Audio driver from the following link.

  IDT Audio Driver - Windows 7.

  Kind regards

  DP - K