Hard Reset Factory - Vista problems

Similar Questions

• How to perform a hard reset Hardware/Software problems

  Troubleshooting hardware and software with a Hard Reset

  Recently, I have been see a large number of issues that can be resolved, or at least try to be solved with a hard reset. A hard reset is one of the major steps in troubleshooting for a wide variety of issues. Issues such as a none responsive, computer keyboard do not start properly, software frozen, etc.

  Why a hard reset works:

  By performing a hard reset, you must remove all power from the computer. This will not occur when you restart or shut down the computer. Even by removing the battery briefly, there may be still some electricity stored in capacitors. When you do the hard reset it deletes the last drop of power from the computer. This clears all the RAM and basically force the computer to re-establish a connection between the BIOs and hardware. It will solve some problems wobbly a majority of the time, and therefore, why it is a great troubleshooting step base.

  If this does not resolve the problem, you are seen be sure to create a new thread and lists all the troubleshooting steps you have tried and also to give a detailed explanation on the issue that you are experiencing.

  Your friend of HP,
  Sean S

• HP Jet 7: Flow HP 7 hard reset - touch screen problem

  OK, I bought new Tablet so I don't need my old HP jet 7.  I'll sell it. Yesterday I tried to reinstall windows (hard reset), but at some point the touch screen stop working.

  So every time when I started my pad, he says:

  "A configuration change has been requested to clear TPM (Trusted Platform Module) computer

  WARNING: Clearin erases the information stored on the TPM. You lose all created keys and access to data encrypted by this key.

  Press YES to clear the TPM

  Press NO to reject this change request and continue

  You accept the change? »

  Since the touch screen does not work, I can not press 'yes '.

  Ideas?

  Hi, check this.

• Pavilion dv7t-3000 mobile: stuck on the startup screen, must repeatedly perform a hard reset to fix

  When starting after a successful boot & use, the PC is stuck on the startup screen that is black with the logo blue & white HP in the middle and "press ESC for the start menu" at the bottom left. I have to perform a hard reset to get a normal startup. Everything works fine. I stop the PC from the start menu. At the next startup the PC hangs at the HP splash screen. A hard reset solves the problem, but the problem occurred on & repeatedly.

  Problem was solved by uninstalling a number of HP programs! Unfortunately I have lost the paper on which I wrote exactly what programs I uninstalled. If you find this issue that may arise on your notrbook, try to uninstall the HP programs

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Windows Vista taskbar becomes unusable. If clicking on something other than 'error' beep start. Reseting solves the problem, but there must be a permanent fix. Solvable?

  Hi Comintern,

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

   

  Method 1:

   

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Let us know the results.

• Vista crashes randomly and have to do hard reset

  Hi guys,.

  Im running Vista Starter 32 and my system hangs at random, the mouse pointer does not move not. applications will not open, can't get into the Task Manager, in order to restart the machine, need to do hard reset. Once the computer restarts, it shows black screen randomly but he continues to go to the login screen without any monitor screen, I type my password then the computer loads windows but still no display, and when I restart the machine poster back, but again, it freezes at random, have tried using the system restore which goes back to the date where no problems were experienced but still no luck. disabled all services except the microsoft services in MSCONFIG, disabled all startup items, did not work. In SafeMode problem also occurs. also tried last known good configuration but still didn't work. no error message is displayed. also tried to use the fix from microsoft for the performance issue, but still did not work... no virus detected. Thank you for the support.

  Hello

  1. What is the brand and model of your computer?

  2 did you change on your computer before this problem?

  3. you receive an error message?

  I suggest to check if the processors get hot and make sure that the CPU fans are clean. You can try the following and see if it helps.

  Method 1

  You can also try the steps in the article below and see if the problem still persists.

  Optimize Windows Vista for better performance http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance

  Method 2

  If the problem persists, you can run the spelling system file and see if it works very well.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3

  If the problem persists, you can create a new user account and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• HP ProBook s 4530: hard reset and factory reset the same thing?

  Hello

  I wanted to know if the hard reset and factory reset are the same things?

  my laptop does not light and I discovered that I can reset hard, but I don't want any of my data on HDD to erase. is this possible?

  (I stop before so there is no data on the RAM)

  Thanks in advance.

  Hello

  No, the factory reset will bring your machine with status (time opening the box) byt hard reset will not.

  Kind regards.

• Factory\HARD reset HP DesignJet T2300

  Hello! I have HP DesignJet T2300 with lost password. How factory\hard reset this device or enter the service menu (I hope, hard reset is in the menu)?

  If you click on the key icon and scroll to service mode, enter 3174 and scroll to reset access control.   I hope that this resets the password I've ever had to try before.

• HP pavillion (don't know who): Hard reset - system cooling fan problem

  When I turn on my laptop a message indicating that there is a problem with the cooling system etc., (90 b system fan) fan

  I followed some instructions online include blowing through vents to try and remove any dust or dirt build up, the next time I turned on my laptop the message disappeared... However, it turned up which means that the problem is still there.

  I went on hp techcenter Web site and he said to do a hard reset as the next step - I'm afraid that this will remove all my documents, music, pictures etc it goes?

  In addition, will be a hard reset even fix the fan cooling or is something that must be taken in a store to fix properly, I don't want to mess with it and have it crash on me even more!

  Would appreciate any advice or suggestions, thank you!

  Hi LCh1,

  Please try the following,

  A Hard reset about a drain of power & does not affect your files.

  Just unplug battery & adapter then press & hold it hold the button for 30 seconds & then tun turn it on with the power cord only.

  This is the right way to do a Hard reset.

  Also update the BIOS to make sure a little extra.

  After all, if you have the same problem, contact HP Support by phone or chat if the asset guarantee.

  Or buy the chassis fan & do replace it yourself or contact a local ASP

  It may be useful

• Activation problem with hard disk containing Vista deleted from a computer dead and installed in a work computer.

  Problem: HP laptop with Vista installed suffers an untimely death. The installed hard drive with Vista is still OK. Hard disk has been removed from the HP laptop and then installed in an old Dell laptop. Windows Vista is complaining that Vista is not valid and must be activated. I get the activation from valid product key and the activation utility responds with an error 0xC004E003 code and will not activate. Microsoft does not support chat or e-mail for Vista and I can not even a phone number to talk to a human being. I think I should be able to remove Vista from a computer and run it on another without Microsoft having a problem with it. What should I do for this? Any help will be appreciated. Thank you.

  Property to true. An OEM Vista license does "die with the computer. Conditions of licence for the version of Windows 8 have changed compared to the terms for the most comparable Windows 7 or Vista or XP. In my opinion, the terms are now even more restrictive, more or less.

  Good luck exploring alternatives to the BONE. Some Linux distributions are well worth a visit. Ubuntu, Suse and Mint are quite simple to install on a wide range of material. I'm not familiar with the Apple/Mac or Android offers, but many speak well of them.

  Calculation of the happy.

  Tom Ferguson

• IPhone SE lights not after an appearance at the screen frozen, faded and an attempt to hard reset.

  I just took the new smartphone Iphone SE in April 2016. It worked perfectly fine for the months that I had it until last night. I was recording playing me the guitar, when I put the phone down with the camera open for a few seconds. When I went to get the phone upwards, the screen was frozen and colors have been melted. The multicolored lines appeared as well. I tried to close the application by pressing the home button, and when I tried to press the sleep button to access the lock screen, the phone went black. When I went to press the sleep button to access the lock screen, the phone opens the same screen frozen, multicolored as before. I panicked and hard reset the phone. I turn on is no longer the phone. No apple logo appears, as well as logos 'connect to Itunes '. I tried to restore the phone to factory via Itunes, but it was without result.

  Surprisingly, when I went to restore the phone, the second time, serial number has changed from a game of numbers and letters invalid "s/o," as if Itunes is no longer permitted to detect it as an iPhone. In addition, the phone is now considered as a completely new system on Itunes, which I don't know is normal.

  I made an appointment with the Applestore for tomorrow, but I would like to comment on what someone thinks that this problem could be. I have not tried to Jailbreak the phone somehow, but have the feeling that my phone may have been hacked, or perhaps he is being malicious programs? Maybe it's a motherboard problem or display?

  Any comments would be greatly appreciated.

  -B.S.

  I made an appointment with the Apple store for tomorrow, but I would like to comment on what someone thinks that this problem could be. I have not tried to Jailbreak the phone somehow, but have the feeling that my phone may have been hacked, or perhaps he is being malicious programs? Maybe it's a motherboard problem or display?

  Your phone is not hacked and all the malware only you could catch is malicious cookies in Safari or other browsers that are removed easily by clearing their cache. I suspect you have a hardware problem, nothing more, that should solve the Apple store.

• Motorola Defy Hard Reset with FROYO

  I don't know if im being stupid or if there is a problem with my camera. I want to perform a hard reset and clear the cache on my phone I have been experiancing a few minor bugs since the update to Froyo, but for some reason, I can't get to the screen of the bootloader on Flash as before, can someone explain what im doing wrong!

  Thank you

  Steve

  Turn off the phone.

  Wait 5 to 10 seconds.

  Press and hold the POWER and VOLUME DOWN keys until a screen will appear with a "!" inside a triangle and a little Android standing next to him.

  Press both VOLUME keys at the same time to display the menu.

  Use the VOLUME keys, navigate through the menu to select Factory Reset / wipe and make your choice with the POWER button.

  Once the reset is complete, go to the system to reboot and make your selection with the POWER button.

  Your phone should now be reset to the factory settings.

• I don't see the entire hard drive under Vista. When I try to shrink a volume, I seem to lose space.

  Original title: I see all the hard drive under Vista

  I see on the C drive properties
  "space used = 143 GB ', and"
  "494GB of free space.   But, when I try to do a third partition to install windows 7, using the disk management tool, after I click on
  shrink the volume on drive c, I don't see that: ' available shrink space: 79, 917 MB ' and I also see 'total size after shrink in MB = 573891'.  I expect all the free space 494 GB available shrink.  I'm wrong.    Why all the 494GBs are not available to reduce or at least half of it, I guess that instead of only available to shrink 79Gs!
  In addition, currently, I have three partitions.  For vista, office and other programs and data, C D like Factory Image of HP, a 11.3 GB and yesterday I made a partition for windows 7 with 48.83GBs and installed windows 7 Professional there.  Then I realize, I need more space to install office and other programs and data.  This is when I tried to shrink the c drive and encountered this problem.
  Can you please help me
  Thank you

  Hello

  you do not shrink the C: drive and then expand the E: drive back in the space that you did

  You cannot extend a drive backward

  and I gave you a link to read and use on the problems of shrinkage

  If as a result of the information on how vista disk management work does not fit what you want to do, you may need to buy 3rd party partition software

• G6 museums: impossible to reset factory my g6 of museums

  I have a g6 of museums which took an OS original win7 that I updated to win 10. recently I turned off my computer was starting up and after that he gave me a blue error screen that says: cinfig bad information system. I managed to install a pro 8.1 win but first when I enter my product number it n/t turn on and I can not reset factory my device back to its original win 7. I guess it does not find the drive to store the source files and it gives me another message that the primary drive has already 4 partitions and cannot have more. I used to be able to reset factory that my camera at any time, but now, it asks you a sorce of road and have just come back to win 8.1. How can I reset my device?

  maysam82

  Hello;

  Let me welcome you on the HP forums!

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!

  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine. It's pretty much guarantee that no HP recovery will work: http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/HP-Recovery-Manager-Blocked-After-Windows-10-Upgrade/td-p/5170752

  This means that RESET no longer works on your laptop through your do the upgrade of Win10.

  To really restore your PC to its original state, you need something known as HP recovery media.

  HP recovery media is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs. You must order at HP; they cannot be downloaded.

  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers

  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update". If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entry and click on order to press for more details.

  Or, if you prefer, you can do the same by contacting HP Customer Service:

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  If you have difficulties to find a phone number, then try: 1 (800) 474-6836
  ---------------------------------------
  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  ---------------------------------------

  If HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck