hardisk

Similar Questions

• MY mail server hardisk full so cannot start services & also unable to access the mail server

  I have the server messaging, but Hardisk ful then failed to start Services and also unable to access the e-mail mail server troubleshooting steps.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• License of Windows of my OLD Hardisk to a NEW hard drive on the same computer

  I have a computer that came with a Vista 32 bit OEM base HP and I upgraded to the retail of Windows 7 Home Premium on my old 320 GB hard drive.

  Extra: I accidentally deleted my Partition Recovery Vista provided by HP.  Now, I have more ways to recover Vista (including OS DVD Media Kit).

  So I think the upgrade from my old hard drive on a NEW 1 TB hard drive 320.

  However, I am a bit worried if Windows would allow me to activate if I install the Windows 7 Home Premium on the NEW 1 TB hard drive.

  He is still active? If it does not turn on, all the solutions to fix it?

  Bonus: I have Windows 7 Home Premium Disc

  Thank you for reading.

  How to pass windows 7 hard disk nine or greater using the backup and restore of Windows 7
  http://www.PAGESTART.com/win7bckuprstrnhd072610.html

  How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
  A step by step guide on the use of Acronis True Image Home 2011.
  http://www.PAGESTART.com/acronisnewharddrive01.html

  J W Stuart: http://www.pagestart.com

• Extend hardisk does not increase the size

  Hello

  I have a 30 GB c:\ and added another 50 to make it 80 GB.

  I only 30 GB.   Is it due to the structure of basic disk?

  It is running windows 2003 sp2 VMs on esx 4.0

  you will have no problems that extends to a basic disk.  You can do it online as AndreTheGiant pointed out using extpart.  Or if you are not comfortable doing it this way, use a helper VM and run diskpart to extend the volume.

  http://support.Dell.com/support/downloads/download.aspx?c=us&CS=19&l=en&s=DHS&ReleaseID=R64398&formatcnt=2&FILEID=83929

  Since you already have unallocated space follow the instructions below regarding the VM helper beginning in step 4

  http://vmprofessional.com/index.php?content=2k3resize

• Card mother compatible ECS MCP73VT-PM please. I need a motherboard that can hold in HP IMEDIA X 2414

  Boots of my HP DESKTOP IMEDIA X 2414 (bought from PC World UK 2.5 years) is no longer.
  TECHNICAL DATA:
  MATERIAL:
  IMEDIA X 2414
  Intel Core 2 QUAD processor Q6600
  3 GB DDR2 #320 GB 7200 RPM SATA HARDISK
  NVIDIA: GEFORCE 7050 up to 1407 MB
  P/N: PB80128501
  [Personal information]
  PROBLEM: Switch on computer and you get NO SIGNAL on monitor LCD ACER.
  MY STEP BY STEP TOUBLESHOOTING:
  1 Unlpug monitor and a card on my laptop (very good for my laptop boots) so WATCH not IS NOT THE PROBLEM.
  2 replace MY power supply with a new power supply, no change (IE NO SIGNAL appears ON the screen LCD ACER), PSU (Power Supply Unit) is not the problem.
  3. REMOVE 2 DDR2 RAM cards, switch on the desk, and I get a continuous beep. Apparently
  This suggests that the motherboard (ECS MCP73VT-PM) is good.
  4 reinstall the 2 DRR2 RAM cards, insert a new external graphics card, unplug the monitor from
  Graphic INTEGRATED card and plug it into an external graphics card, turn on the computer, result: ALWAYS
  NO SIGNAL on the monitor, so graphics card isn't necessarily the problem.
  5. extract the whole motherboard of the computer case, use my magniflying glass to inspect
  all the capacitors. No capacitor doesn't show any corrosion to their background, no bump on top, without leakage
  any where. Then I remove the (intel Core 2 QUAD processor Q6600) processor, check it carefully.
  no leakage.
  (6 reinsert the processor, turn on the computer, yet I get NO SIGNAL ON monitor)
  
  Question: What is my problem
  Answer: My motherboard is faulty and I can't find the fault.
  Now, I want to replace the motherboard together and then to reuse my 2 DDR2 RAM and processor cards
  on a motherboard which must be geometrically compatible with ECS MCP73VT-PM motherboard.
  Could you tell me what kind of mother I have to buy. I am absolutely sure that my 2 DDR2 RAM cards are still usable because I tested them on another computer that can boot up. I do not know
  on the processor, because I was not able to test it on another machine.
  Help, please. MY new motherborad should be able to adapt in the case and has compatible
  audio.

  It is a HP support forum.

  I recommend that you give Packard Bell support a trial.

• Pavilion g62136tx: not found boot device... Hardisk3F0

  When I turn on the laptop... it's "boot device is not found... Please install OS...» Hardisk 3F0 "... But I have restored the default bios settings... recovery even played with the recovery discs... even after that the same problem persists... When I did the test drive... once he saysass but the next time he appears not found... what should I do? Help me please!

  I think that either the hard drive or motherboard fail, and you must go to a workshop for advanced diagnostics.

• HP Jet 13-c019tu: help options alternative Options to upgrade and storage to be used again

  I'll do more my BA engineering courses for 4 years from now in the computer field and I heard that it requires not too big programs, but not too small to install hp laptop 13 STREAM on the PC that I OWN the computer I know that it can not be upgraded to the best SSD STORAGE but can I use an external with USB 3.0 hardisk uSB INTERFACE to store and install the apps & PROGRAMS

  Very difficult to execute applications of external storage, because a part of the application must be registered in the registry and .dll files must be in the/windows folder when even though you may not entirely separate programs on an external storage medium.

  You might consider a card (SD) digital blocked to extend storage. A fast SD card of class 10 can be installed and pretty much converted to permanent storage, you can carry with you inside the laptop. Data and programs can be installed on the SD card. I saw them up to 512 GB.

  But to intervene with the voice of reason, if you go to Engineering and Computer Science, according to me, you have to think in terms of a laptop other than the stream. You can find low power do 3D technical drawing and compile the Code.

• faild - replace hard disk 1 (security id - error code 10008)

  When I open up my laptop so they gives error - faild - replace hard disk 1 (security id - error code 10008)

  can u tell me what I can do... but my hard drive works fine, but gives this error... you can tell me... .what I can drive u, can replace hard drive or not... and also my laptop warranty is expired... u can tell me one thing when I replace it my hard drive... .then they give me some conssesion or not... .and when my laptop gives error so can u tell me one more thing my hardisk recover or not... Please tell me...

  Hello

  You can run a test on your hard drive to make sure if its in a State of operation or do not use the link below

  http://support.HP.com/us-en/document/c00439024

  If the above test fails, you will need to replace the hard drive. You can buy the hard drive by going to the HP service center or any place where you want. To reinstall the operating system, you will need to buy the recovery disk set by calling HP techinical support.

• external frequency step-down converter

  Hello

  1. I have a digitizer 5142 with a resolution of 14 (16) bit. can I change this rate of 8-bit scanning, or can I get a signal to 8 bits using 5142 I

  think I can using neither scope config. If yes also means I increased the speed of 200MBS 100MBS (since I am only

  using 8-bit scanning). increases the speed of transfer of the data from my memory shipped to hardisk only or both are applicable

  2 - I read this specification 5142 when I stumbled upon two things that I surrounded as JPG attachments

  a. filter anit-alisasing has a bandwidth of 40 Mhz, and default 5142 uses what it means. Can I use

  some other external down converter instead of 5600 and which can acqiure 40 Mhz bandwidth at any center frequency and I can feed to

  5142 to get digitized and writre a file on my disk. .i can't use DAMA since I use a step-down external frequency converter. How using or

  scope/tuner vi.

  (b) the other is true flat bandwidth = 0.4 * rate and bandwidth flat complex sample = 0.8 * sampling frequency that we mean by these two.

  Concerning

  MADD

  Hi malala.

  1. correct me if I'm wrong. Insofar as I have defended frequency translation means that if I have acquired a signal at 50 MHZ with a 40 MHZ Bandwidth (F_high = 70 Mhz and F_low = 30 Mhz). My frequency step-down converter. If I select the option enable translation frequency and frequency set to 20 MHZ (option to activate with the SDC thus) signal that I have gained is now translated to 20 MHz (C.F), the maximum frequency to 40 Mhz and Minimum to 0 Mhz. Is it so? If this is correct, then I think that my Ghost will meet the requirement of the spectrum of nyquist and won't be mitigated...

  Not quite fact-frequency translation used to take your signal of a certain frequency IF complex base band (centered around 0 Hz). If you set your frequency of 20 MHz, 20 MHz will tune to your NCO and you will acquire some bandwidth, based on IQ rates, around this central frequency. For example, if you used 20 MHz bandwidth (rate of IQ = 25. MECH / s) and a center frequency of 20 MHz, get you 10 MHz to 30 MHz of frequency and translate this to baseband. Now you have your frequency content at +/-10 MHz.

  To do what you seem to want to do, you must set your frequency to 50 MHz as well as your IQ rate to 1.25xBW = 50 MECH. / s. This will mean your 40 MHz BW from 50 MHz to complex baseband.

  2. also mention that I can put this decimation is property invoke node or filter specifications.

  Decimation is another property of the OSP and the mechanism of the clock. Your decimation is defined by your IQ rate compared to your time base sample clock. For example, by default, we use a time base 100 MECH. / s for the 5142. If I put my IQ rate 2 MECH. / s, I will use a factor of the decimation of 50. Our table of decimation emphasises, however, that, in the range of 12 to 4 096, we can only use decimation integers that are multiples of four. So, we will eventually be forced in this case to 48 and a sampling rate of 2.0833 MECH. / s. You can then perform resampling to 2 MECH. / s in the software.

  3 - something else enable and disable the noise/anti-aliasing filter. Combination of maximum frequency of niscope configuration characteristic.vi. If I put it in noise filter 20 Mhz is on now and when I started 35 Mhz filter anti-aliasing is enabled. Is it so?

  That's right - your maximum frequency setting to be in one of these filters will allow this way. If I put a maximum frequency of 19 MHz, the filter is activated. If I put a max of 30 MHz frequency, the Anti-aliasing filter is enabled. 0 will default, and -1 will allow full BW.

  Kind regards

• ProBook 4310 s: drive hard test 1 (fast) failed

  hardisk 1 (fast) test failed, but still can start the windown 7. Wireless can not auto detected

  The hard drive is faulty and must be replaced. Sometimes it will start for a while - but you will get random errors. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

• M6-1205dx Windows 7 screen Freeze/Pixilation

  I got my computer from windows 8 for windows 7. I did it before I had done all the research on how this is something that will be super hard and give me a lot of problems. Evil goes through what I did so that we can try to understand what went wrong.

  I tried to install windows 7, he said he did not support Legacy mode enabled, then I have partitioned the hard drive and erased everything, I used the GParted program. I was able to install windows 7 after that. I didn't think it through that I had not all drivers readily avalible to install on my computer. I made a post here and has been gently guided to were I could get some work drivers for my computer.

  Now I am Reciving is that. I at randome times screen Get gel/pixilation - the pixilation isn't all over the screen right into small sections or small lines on the screen, the only way to deal with this is to make a manual stop by holding the power button. The other question I am reciving is also at randome times my computer will restart, and then start back upward with the error message that allows me to choose if I want to start in safe mode or not.

  I understand that I could probably reinstall windows 8 and solve all my problems, but I don't have a windows disc 8 to do this. Any help would be really great.

  This is a brand new computer I just picked up 12/06/2013 did a bad Hardisk sectors check no..  Do you have a RAM check all past and I have also not found that any errors in the event log.

  Hey mmacegan91,

  Windows 7 is not supported on your platform, no official drivers are available for that combination of operating system and platform, and so questions are likely.

  That said, the best option is to install an operating system supported, that the system has been designed - in this case, Windows 8. If you did not create recovery media before you erase your drive, you will need to order some directly contacting HP Support (800-HP-INVENT).

• How to initialize a hard drive for the first time?

  I just got a new hardisk. What should I do before using it? Can someone give me instructions step by step?
  IM using Windows Xp

  In this case, shut down the PC, unplug the power cord, take anti-static precautions and install the disk drive. Turn on the PC and use disk management to partition/format-it as wish you...

  http://support.Microsoft.com/kb/309000

  ... NTFS file system is the best.

  To store your data, I recommend to move the My Documents folder...

  http://support.Microsoft.com/kb/310147

  ... but you don't have to do if you want to keep some data on C: and the rest on a partition on the new disk.

  You could also start to install some programs (games or other) on the disk by making custom installations and change the drive letter.

  Tricky

• Problem WinXP SP1a installation via internet

  This is similar to post Russ Maxon

  "When installing Win XP SP1a via internet, the microsoft web server isn't reachable. Instructions error msg telling me to go to the website of MS XP Service Pack and click on "Problems downloading the Service Pack" for a version of the SP1 update that does not require any interaction with the web server. "I can't find this place to get these instructions, so I can complete my reinstall the upgrade of Windows XP.

  I use a Dell Inspiron 4100 laptop with a whole new hardisk Samsung160Gb and running Windows XP.

  I do a full reinstall as previous hard drive was no longer functional.

  I installed the XP Home and Office XP Professional operating system from the original disks.

  I have a wireless internet connection via VirginMedia using IE7.

  Automatic updates says it won't work because the system is not up-to-date - not very useful.

  I try to make updates in the order and have read various bits of advice on the Microsoft Web site on the upgrade: for example all upgrades are cumulative, this SP2 requires no SP1; but SP3 requires first of SP1a or SP2. That's why I tried to use SP1a Express download, after which I got the above error message.

  In your response to Russ Maxon, it has been suggested that he go directly to SP2, but it doesn't seem to be an independent download for SP2 for home use, only for network deployment.

  Thus, the crucial questions are, exactly where full versions of SP1a and SP2 are drawn.

  Hello MalTom,

  Visit this link on my site: http://xphelpandsupport.mvps.org/how_can_i_download_a_full_copy_o.htm

  The information on this link to download the Service Pack 2 on the download site. Yes it say the deployment of the network, but ignore that, simply download the full service pack and install it.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Computer repaired and returned with various breakdowns

  I recently bought a new E5-411, installed win 8.1 and everything worked well until what after a few months the computer doesn't turn on. I made a trip of five hours the center of repair of Acer in Phuket (Thailand). They replaced the motherboard, but when the computer was returnd to me the touchpad did not work, the engineer said that I needed to reinstall Windows. I travelled to where I live has spent several hours to reinstall the operating system by various methods, eventually doing a clean install on formatted and newly partioned hardisk... still the touchpad does not work. I telephoned the engineer at the repair center and he said that because the motherboard has been changed my original windows would no longer work and I need them to reinstall at any store of the local computer. This isn't a logic for me maybe someone can enlighten me.

  There was an update of the bios for this model on the Acer support site, a fix for problems with the touchpad and earn 8.1, I flashed it but still TP does not.

  Another thing, I discovered, is that my original s/n was NX. MLQST.002 now he has changed in NB MLQ11.00A, although the MB model and version are the same (EA41_BM type 2 - A01). Could be the source of the problem? The NB. Replacement of MLQ11.00A seems to have been produced earlier than my original MB. As my machine is under warranty, why didn't he replace it with another NX. MLQST.002. when I enter my old full s/n Acer support site looking for my model Aspire E5-411 if displayed in the results, when I put the number changed in it comes up with no results. Can someone explain what is happening?

  Thanks in advance

  brogreg

  brogreg,

  Looks like it needs to be repaired again. I know that you said you contacted them, but in fact you inquire about having brought to get again reviewed by the repair center? I know that the drive is not just around the corner, but I think it's maybe the best place to start.

• Computer Vista will not start, the computer keeps restarting. Also had a BSOD "STOP: 0 x 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)" while trying to use reinstall OS Dell drive

  Original title: corrupted vista OS?

  My Dell studio slim desktop (Vista OS) that I have since Mar09 died on me 2 weeks back and I can't it start and it will keep rebooting until it resembles the wide long beep (as if a deceased person)

  Whenever my com has restarted, it shows the following:

  Safe mode

  Safe mode with networking

  Safe mode with command prompt

  Last known good configuration (Advanced)

  Start Windows normally

  All options will be led to the recovery of my com & return the same screen.

  It will always get stuck at the loading bar where the com starts boot & restarts itself.

  I tried to attach the hard drive to a different com as external hard drive, but it will begin to restart that com & hang the CMO as well

  I tried using the disc to reinstall OS from DELL and it will show a msg of error (blue screen) with the following text:

  Disable or uninstall the antivirus, Defrag disk or backup utilities. Check the configuration of the hard disk & check for any updated drivers.

  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  STOP: 0 X 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)

  NTFS.sys address 8CC143A1 base at 8CC06000, Datestamp 47918a 96

  Any idea of this situation?

  Is it possible to save my cause com have not all backups from my hard drive?

  Any help would be grateful.

  Thank you

  Hi Bill,

  I forgot to include some info as well... I replaced the 'touched' hardisk (Barracuda 500 GB) to an unused a (Barracuda 160 GB) and the problems disappeared. Whenever I change back the 500 GB in the com, the sound signal occurs only backwards the system continues the reopening for abt... 10 + times?

  "My Office studio slim (Vista OS) Dell I have since Mar09 died on me 2 weeks back and I can't it start, and he'll keep rebooting until it seems a beep long-lasting looks not (as if someone died).

  So the questions are now fixed, unless you put the other disk hard?

  Test the other hard drive.

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  And run the F12 as I advised you to do so.

  It is DELL's Diagnostics software.

  Good luck with it.