Hardware changes not detected using a flash drive, the missing, system restore points tried every fix that MS can offer in Windows 7
All of a sudden, I have several problems with my computer. I can't not computer to recognize a flash drive. Printer works in the same usb port. I used Device Manager, checked the drivers, made every difficulty that MS has to offer, each difficulty that Dell can offer, but the problem remains. I don't feel uncomfortable so I don't have to play with the registry. I uninstalled the drivers and rebooted. The only changes that I did before this happened was to uninstall and reinstall I-tunes. The flash drive, I use would be defective? When I went to the system restore, my restore points have disappeared, that was the point where I uninstalled I-tunes. I also noticed that when I tried to detect problems with the resolution of the problems of hardware and devices, it says "material changes may not have been detected. In detail, it also shows "there is no configured windows in a way never install driver - edition". WHAT? I know that windows IS configured to automatically install. (Deep breath)
Very well. So I am at a loss. Any suggestions? Thank you very much for your time and your attention...
http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN
Tags: Windows
Similar Questions
-
Someone please help! I am an intermediate user and I can't get windows update to work since December 4. I was on youtube and what you clicked on a link under a video, a Malware Removal window skipped upward and before I could do anything he disappeared since this happened, windows update does not work, (not KB972696) (error 80072efe code). I ran AVG, advanced system care and a multitude of online programs that say they will fix the problem with nothing doesn't. I tried to remove the "winhelp" virus last night by doing the hard and using regedit, but it did not help. I'll do anything to remedy. Can someone help me please. I am at a total loss about what to do next? I get a sign of malware/trojan removal of ad-aware and defender who said "onacokuhupotovun.dll_old" but he says it removed but it comes back. I get a pop-up from windows saying "a service host has stopped working and was closed" but soen can't say that. How can I return update still works once, then update of Defender and system restore points?
I use an Intel core duo 2, E7500 2.94 ghz, 4gig of ram, Vista professional.
Help, please!
HelloFollow the steps mentioned below and check if the problem persists.Step 1:a. I'll get a scanner online using the link below and check if that helps eliminate malware.b. you can also run a scan in SafeMode with networking online, which is known to be more effective in eliminating the virus/malware.Step 2:If possible, download and install Windows Security Essentials and run a full analysis of the PC (Personal Computer) in normal mode or safe mode .For Windows Update problem, you can follow the methods of the link below and check if the problem persists.
Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
I can't open windows dev, required audio hardware is not detected
My computer says: "Windows movie maker cannot be used because the required audio hardware is not detected on your computer".
The audio material is on my computer. I downloaded the audio to youtube, I have changed it to an AVI file with www.zamzar.com
Can someone help me please?
It is already very clear. The audio from your computer does not meet the minimum requirements of Windows Movie Maker.
Hardware audio here refers to the audio device (common examples are Realtek and Conexant High Definition Audio) in your computer and not the audio file you want to add to the film.
Audio drivers may be damaged or have problems.
Please tell the following details on your PC-
* Manufacturer/OEM (HP, Dell, Sony, Acer, MSI, etc..)
* The series and model
The information could be useful to find the updated drivers for your audio device.
Also, press the Windows key + R, type devmgmt.msc and press ENTER. Expand sound, video and game controllers, and then check that your audio device is there. Also, double-click on your audio device, click the general. The State of the device should be "this device works correctly. If it displays errors or problems please post a description of the State of the device with the error code here.
Also, try to download and install Windows Movie Maker Version 2.6.
-
x 61 does not start from usb flash drive
I don't know that I did several times before, but for some reason any my x 61 does not allow me to boot to a usb flash drive, I use normally to install the operating system.
Any suggestions what might be wrong and what I could do about it?
I should mention that USB is enabled in the BIOS and usb flash drive install works on other computers.
Update seems to be an incompatibility with wintoflash, I used the Microsoft DVD/USB tool and it starts the flash player and finished the installation. Strangely the wintoflash installation worked fine in a HP dv3000.
Consider this resolved.
Wow I never saw your post until that earlier.
Situation is resolved in the first post
-
How to use a flash drive to download mods and expansion packs to an Xbox 360?
This question is perhaps out of bounds for this site, but as MS I thought I would give it a shot. Laughing out loud
I tried for a while to use a flash drive to download mods and to my games on my 360 expansion packs. However, I can't make it work. According to the website of XBOX 360, it can be done, but after following the instructions, I had no chance.
Anyone have any ideas here?
Thank you
PS My cable company does not offer a wireless right now modem to install XBOX Live.
Hi southerngent (2),
Thanks for posting in the Microsoft community!
What steps did you follow?
If you haven't tried these links you can check:
I suggest you to visit the links below and check if it helps.
Use the Xbox 360 hard drive transfer cable
http://support.Xbox.com/en-us/Xbox-360/accessories/set-up-transfer-cable
Support for the Xbox 360 USB flash drive
http://support.Xbox.com/en-us/Xbox-360/accessories/USB-flash-drive
You can also contact Xbox support.
http://support.Xbox.com/en-us/Games/PC-games/game-support
Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.
We can't wait to hear back on your part.
-
How long will take to perform a backup in Vista? And if I use a flash drive?
I'm doing a back up on my laptop for the first time. I want to know how long does take to make it complete? and can I use a flash drive to put it on the back
* original title - I need help *.
I'm doing a back up on my laptop for the first time. I want to know how long does take to make it complete? and can I use a flash drive to put it on the back
Yes, you can use a flash drive.
It is conventional to use an external hard drive. Mine has a capacity of 1 TB of sub Canandian $100.
As for how long, it varies. Depends on the amount of files to back up.
I think that the first time I did it was an hour.
The next backup would be shorter because he'll be increment backup... just save those who are new.
-
THE ATTENTION! Has not detected one or more drives during POST
I have a desktop T7400.
during post, I get this error:
"WARNING!" Has not detected one or more drives during POST
Press F1 to continue... »
I press F1 and it starts up fine, but I have to stop this message from appearing every time that I turn it on.
I have 1 CD-ROM and 2 sata hardrives on the system.
I need help please.
Thank you
Disable the option 1 SATA in the bios and save the settings. There is nothing connected to the sata port 1.
-
How to install my program of office of a computer to another computer using a flash driver.
Copy the installation media of the entire desktop on a flash drive.
Insert the flash drive in the computer on which you want office...
Open it to "file view"...
Click Setup...
-
Windows does not detect my cd-rom drive in 7 edition, can't Reinstall driver, help.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
Fix for CD/DVD drive missing:
-
I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?
You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.
-
I'm unable to connect to the internet and I also can not use the WinXP system restore.
No internet connection and I also can not use the WinXP system restore because it gives me an error at the 'end' which said: it cannot be restored to an earlier date. I run AntiMalware bytes and StopZilla and erased all that they found. Now I can't even connect to the internet. When I go to the command prompt, it gives me an error contact the Support of MS that I know means I have a virus or a trojan that I should just get a time out? My other PC on the same network is fine and connected. The NETWORK card is fine, just does not know how to get rid of what it is, I have and to top it all impossible to connect to the internet to try all of the tools that can help. Someone at - it ideas?
The error you get at the end of the restoration of the system is typical of some anti-virus programs (Norton, especially) that interfere with the restoration of the system. Try to start your computer in Mode safe (on several occasions, key to tap F8 while your computer starts) and run safe mode system restore.
Additional information is necessary to treat your network problem. Try to bring up a command prompt (start-> Run-> "cmd") or if it does not, try (start-> Run-> "command.com") and enter the command:
ipconfig/all
and after the info that appears in the State resulting.Also, check the logs of your system related errors (start-> Run-> "eventvwr.msc") and click on 'System' in the left column.
HTH,
JW -
When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate
depends on the speed, support USB 2.0, USB 2.0 ports, and with active BIOS settings
(2) you can increase the speed, if your motherbaord has a USB 3.0 port and must be enabled in the BIOS
-
I run on a Mac CS6. I need to change the operating system and would like to know if I can still install the software. I upgraded to OS X 7 (Lion) for OS X 10 (Coyote), but my devices would not work. I'm changing to OS X 7 (Lion), but this will eliminate my entire hard drive. My CS6 software install? I bought CS5 and CS6 improved. I don't want to go on the CCif I don't have to. Thank you!!!
as long as you have your serial numbers and installation cs6 files, you should be ok.
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
- Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
window using the Lightroom 3 link to see these "important Instructions".
-
I ran 'avg' antivirus... scan found nothing.
Ran "Malewarebytes' scan... nothing found.
Talked to my instructor I.T., symptoms did look at the RAM, hard drive.
Computer is under warranty for the hardware. Taken to the place where I bought the computer. The technicians he ran many tests of diag all returned material is functioning 100% other than the floppy drive. (computer does not have one) Tech "gut" is the operating system. Advise the reformatting of the hardrive, re - install OS. I don't have my installation disc. It was damaged earlier. How can I solve this?
Name of the operating system Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
Manufacturer of operating system Microsoft Corporation
Name of the PORTABLE system
The IBM system manufacturer
266844U system model
System Type X 86-based PC
Processor x 86 Family 6 Model 13 Stepping 8 GenuineIntel ~ 1862 Mhz
1YET65WW IBM BIOS Version/Date (1.29), 21/08/2006
SMBIOS Version 2.33
Windows C:\WINDOWS directory
System directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
The local United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
LAPTOP\Owner user name
Eastern Daylight Time zone
Total physical memory 1 024,00 MB
Available physical memory 363,66 MB
Total virtual memory 2.00 GB
Available virtual memory 1.96 GB
Swap file space 2.40 GB
Paging file C:\pagefile.sysezhill,
If your system was purchased with XP already installed on the manufacturer should be able to provide the replacement recovery media. If you bought XP in a retail store, then you can check out the article for more information on filtering of spare: http://support.microsoft.com/kb/326246Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I installed Microsoft Security Essentials today and I'm trying to edit startup programs. Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open. However, most of the security will not allow Windows Defender be turned on and I want to change the startup parameters. How can I accomplish this?
Hello
If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.
There is nothing to worry.
Using both programs at the same time can cause system conflicts, etc.
If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
And now edit startup in Vista without using Defender programs, use one of the following methods:
"How to use MSCONFIG in Windows Vista"
http://netsquirrel.com/Msconfig/msconfig_vista.html
Or the program Autoruns for FREE:
"V11.21 Autoruns for Windows"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
See you soon.
Maybe you are looking for
-
PDF.js eats a lot of memory
I have five PDFs open in my browser being each size of ~ 1 MB = > 5 MB. (Looked up by downloading them) However, pdf.js uses combined 457 MB of RAM (162 + 132 + 70 + 56 + 23 MB) to view these documents. Needless to say, a pdf of 100 MB or more open w
-
iMac G3 tray charger stuck on the gray screen with question mark flashing folder
I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark. Not only it does not maintain the key
-
Drivers USB for Pavilion H8 Windows 7
I lost communication with my scanner, camera, GPS, USB-sticks, this has something to do with Windows XP?
-
MAX does not detect my instrument 488.2 GPIB-USB-HS, but Windows XP Device Manager only
Hello I have a problem when you use the 488.2 GPIB-USB-HS, I see the device in Windows XP Device Manager, but it is not visible in the MAX, I do not see even a section for devices GPIB. However, when I try to install a new device, GPIB, the Wizard MA
-
How to recover programs after reinstalling OS
I installed the 32-bit computers operating system that has removed some programs, how can I restore to the previous setting? original title: I want to uninstall and install the operating system