hardware error internal-234101

Similar Questions

• Pavilion 15 series: fatal hardware error...

  Hello guys... so I ve got angry and hit my pc... not so hard but at least 10 times... now it doesn't work anymore. He says that he has a fatal hardware error... the unit can't find directories more... What do I do?

  Hey,.

  All the information you need, you can find in the Guide Service and Maintenance for your laptop. You can take a look at the HP PartSurfer also, type your product number and it will bring up all the available parts.

  I will also provide with the following link to create yourself a file number and contact us for more information.
  
  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.

  Take care

• "hardware error" message on BACK on NB200 when using wireless

  Hello

  I have a toshiba nb200 laptop running xp.
  The WiFi card is an atheros ar9285.

  I have a question where the Wi - Fi connection drops and I see "hardware error" in the BACK trying to make a ping to an external Web site. "
  I can ping my gateway when this happens but not external websites.

  It may be fine for a few days and then I start to experience the issue. I tried to update the driver on 7.7.0.329 but the same problem as before.
  Have you tried assigning static ip address and dns instead of dhcp, disable the windows firewall, stop anti-virus.

  Open to suggestions as to what to try next.

  Concerning
  Martin

  Try to update the BIOS NB200 and also update the firmware on your Wifi router.

• error internal 2753.hpwuSchd2.exe.

  The error message I get when trying to install my HP Deskjet 6543 is: "error internal 2753.hpwuSchd2.exe.» My OS is Windows XP, I tried running Malwarebytes, without success. Can anyone help?

  Hi Markjenkz,

  Follow the steps outlined in the document below and let me know what you find?

  Error fatal 'error 2753' (MSI 2753) appears during the Installation of the HP Windows software

• hardware error Keithley 2410

  Hey, guys.
  I am very new in this LabVIEW, do some programs still use drivers to control instruments. So, recently, I work to control a Keithley SMU 2410. I make a simple program to constant voltage source and measure the current vs time. This program works wells in short periods and Keithley functions very well. But last week, I used for 20 hours, the problem was that 45 minutes of operation, the front screen of EMS unit exploded, the labview show an IO error that can communicate with the instrument, and when I reboot the instrument, he can't do anything, and the labview is not able to communicate with the instrument. The device is made when works as a source unit and can not be damaged by high currents, and therefore the last measures was about 100 my when the level of compliance was at 1. When I turn on the camera, I only hear the fans and I can't do nothing, I look for the fuse but it was ok.

  So I know that it is a hardware error Keithley not associated with NOR. But I got the idea that maybe something that I put in my program to damage the instrument in a certain way. I master the instrument with a serial cable, and I used the drivers I downloaded from a page of NOR, don't remember which version was. Just need help to see if it's a bad thing that I do, damaged the instrument

  Greetings to all.

  Although there are a few bad choice of programming in this code, is nothing that should have caused injury to the Kiethley in code.  Something in the material should be suspected.

• Unknown hardware error code C0000b6d

  I've been browsing the other hardware error codes and have not seen this exact one. My system is a Dell Dimension 8400. This happened directly after a notice flashed on the screen that Avast found a threat, but there wasn't anything I had to do.  Then poof the blue screen of death with the 'unknown hardware error code c0000b6d.

  After that hand, stopping and restarting I get only the Dell screen flash then a high cursor flashing screen left. Cannot get in Mode safe on reboot... just cursed cursor.
  Keyboard strokes are nothing. Help! Katydidtoo

  Hi Katydidtoo,

  1. do you have the Windows XP installation CD?

  Method 1

  It is possible that the hard disk has errors that need to be repaired by using the Windows XP CD.

  If you have the Windows XP CD then I suggest that you run chkdsk on the computer to analyze and repair corrupt errors on the hard drive.

  CHKDSK is available in the Windows Recovery Console and can be a very valuable tool in the treatment of a system that will not start correctly. The use of the Recovery Console is discussed elsewhere, but note that many systems have been rescued by the command chkdsk C: /R Recovery Console there are only two: / p: performs a comprehensive check of the drive and corrects any errors. Does not check if bad sectors / a: locates bad sectors and recovers readable information

  See the Microsoft article below to find out how to start into the recovery console and try the steps above.

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

  Method 2

  If the previous step fails, then check out the Microsoft article and try the steps mentioned below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD/dvd reads but not able to write. says 'hardware error 9216.

  When I got this laptop it reads and writes audio and dvd movies fine but after about two years it stop working. whenever I try to write it not finish writing and guest says 'hardware error 9216. has concluded that it might be because I got more than burning software then maybe they could have a conflict with each other, but I could find something on how to resolve the issue so that why I'll try here.

  It could be the problem with the software if have several software to burn and write as you say. You can uninstall one by one and after uninstalling restart your PC to see what problem a single cause. To better test, it is better to restart after every uninstallation. If you see system information, you can find the details in the conflict, but it is a little technical.

  Restore your system before this problem to occur.

  You can try to run this command at the command prompt:

  sfc/scannow

  Make sure that your system is updated and the latest service pack installed.

  Another thing is that it might be due to malicious software, and in this case, you could run full system scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• A problem with your video hardware (video hardware error) caused Windows to stop working correctly.

  Product

  Windows

  Problem

  Video hardware error

  Date

  06/11/2009 19:16

  Status

  Not reported

  Description

  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem

  Problem event name: LiveKernelEvent

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  WD-20091106 - 1913.dmp

  SysData. XML

  Version.txt

  Additional information about the problem

  BCCode: 117

  BCP1: FFFFFA8009C16260

  BCP2: FFFFFA60026F1220

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_0_6001

  Service Pack: 1_0

  Product: 768_1

  Hello

  BCCode: 117 is generally a problem of display driver (video) If you need to update (check the system machine
  and the sites of the manufacturer of the device. You will need to remove and reinstall your video card a PC and not
  edge. Perhaps a replacement card is necessary.

  If necessary you can perform in SafeMode with network - repeatedly F8 tap that you start.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• d0000144 unknown hardware error

  I have Windows Vista 32 - bit edition on my computer and it does not load in windows normal medium or in safe mode. I tried to do a repair, which was in the F8 menu, but I got a blue screen with the following message at the top left:

  STOP: d0000144 unknown hardware error
  Unknown hard error
  -What this means and how can I solve this problem? There is a wedding coming up and I'm supposed to create programs. This is a nightmare that I can't wake up from. If anyone can help it will be much appreciated.

  It's the hard drive that has failed or failing.

  It's a Dell hard drive error.

  You used the diagnostics from Dell F12?

  Replace the hard drive

  Here's what to do with the Dell Forums of others with this same error code. replace the hard drive...

  http://en.community.Dell.com/support-forums/laptop/f/3518/t/19269780.aspx

  Here are the results of Dell for this research; a failure or hard drive failure.

  http://search.Dell.com/results.aspx?c=us&l=en&s=Gen&cat=CMU&k=error+code+2000-0146&RPP=12&p=1&RF=all&NK=f&IRA=false& ~ SRD = False & ipsys = False & advsrch = False

  See you soon.

• "an error internal, the setting is incorrect (0 x 80070057) ' in windows vista

  I tired to make a backup of my computer on an external hard drive but I have "an error internal, the setting is incorrect (0 x 80070057) ' under windows vista. How can I fix it because it won't let me do a backup?

  Hello

  Try the methods listed in the section below and check.
  "0 x 80070057" error message when you back up files in Windows 7
  http://support.Microsoft.com/kb/982736

  Note: The article above applies both to Windows Vista.

  I hope this helps.

• Blocked (or almost) to "Press the ESC key for Startup Menu" - hardware error!

  Hello

  My daughter has a laptop HP 625 (product code WS786EA #AKS, windows 7) is no longer starts. I tried a lot but have now run out of ideas on how to fix it (or see what error)

  When I power on, it is blocked for a long time on the HP logo screen, saying "button press ESC to the Start Menu. If I press ESC (or any other F key) nothing happens for a long time. After a certain time (like 10 minutes) a menu option is written (I think it's "Press F1 for information system"). Then after a while longer (like 5 mintues longer) finally appears in the start menu. He responds so quickly (within the menu system) and I can do some tests.

  I took the HARD drive, but the slow boot process is still there, I have to wait 10-20 minutes to go into the start menu.

  Once there, I was able to do a memory test, but there is no error found.

  Once there I also managed to update the BIOS (via a bootable USB key) without HARD drive being installed. The same behavior is still there after upgrade (without HARD drive).

  I tried to watch the Flash of the LED "Caps lock". It does not Flash after a long period. I didn't know exactly when it started (I couldn't stay there for 10 minutes waiting for a key to blink maybe), but when I started as he blinked at least 10 times, if it does not match any of the blink codes.

  (I accosted the HARD disk in a USB dock and drive execution som cheques. Some errors have been corrected, but he seemed to be OK also before that. After all the actions above, I reinstalled the HARD drive in the laptop, put in a DVD to recover Windows 7 and rebooted. He didn't care. It 'still hangs"att Startup logo).

  Of course, there is a hardware error, but I wonder how much it will be, it does not, and how do you know?

  Hoping for help from you experts out there...

  Hello matsgw,

  You got an error for the HARD drive.

  The error you are getting is to replace the HARD drive.

  It could be a bad port on the motherboard

  When you start the computer, press F11 and see if you can run a return to settings recovery factory, perhaps a software error.

  I would like to know how everything goes.

  Nice day.

• Printer A940 - hardware error message

  Suddenly, using the Printer A940 to copy a page of A4 format, I get a message "hardware error 0502".  Cannot find anything on this in the owner's manual.

  This is my first time on a 'forum', so I don't know whether to thank Pudgy, Rick or clem whose solution to my "error 0502' material worked!  A lot of gratitude from Wales (just to the left of England).

• Repeat freezing and Action Center "video hardware error error issues."

  I am not very computer savvy, but I had this problem and will provide what I can.  Since 7 September, I've been having repeated, very random questions from my computer to freeze.  I have to force close down to reboot.  It happens the same way every time, where sound begins to hum and the slider's been hanging around, and it freezes completely.  What happened 9 times the date, the last being only 30 minutes ago.  I tried to update everything possible I can drivers for windows updated.  I play every day an MMO and tried swapping game pads in case it could have been the cause, but it has not fixed.  I have been able to reduce it to scroll to the bottom of Web pages that are strong images and it begins to freeze, and I am currently using Firefox.  I couldn't find anything in case the system log of the observer who matched each gel, except once with that I think that the Action Center was looking for a problem and he came:

  Problem: Video hardware error

  Files helping to describe the problem:

  SysData.XML WD-20141002 - 1521.dmp

  WERInternalMetadata.xml

  I've done checks of viruses, malware, RAM test, even taken in a computer store to identify the problem and everything came back with no results.  I'm at a loss where to go next, or what to try.

  My profile: http://i.imgur.com/H2PaXGo.png

  I currently have two monitors, ASUS, but these if overwrite problems began before I had two monitors so I ruled that out.

  Edit: Nothing else seems to be wrong, it restarts normally and worked quite well other than the gel.

  Update the drivers for the chipset of your motherboard site and get the latest drivers for your graphics machine

  Do NOT use windows update to recommended, which includes drivers

  If the problem repeats itself then clean boot PC & retest

  https://support.Microsoft.com/kb/929135?WA=wsignin1.0

• Cisco HX system connection vSphere Client Web show error internal

  I've been recently install HX system version 1.7.3 finishing

  and connect on vSphere Web Client display error - internal

  Could not load the module on /vshpere-client/pluginui/locales/StorvisorUi-zh_TW.swf resources

  Version of vCenter is 6.0U2

  Is - this mean no Chinese tranditional support?

  stanleychou,

  Have you you successfully to redeploy your 1.7.3 cluster HX?

  There is little cleanup that needed to be done in vCenter to erase the old information before re - deploy - such as remove the plugin the vCenter MOB and removal of the old cluster cluster HX

• Windows 7 restarts randomly, A fatal hardware error occurred.

  * original title - Win 7 PC - reboot randomly - expert ideas, would like to make an analysis of dump and whether it is a question of specific material. Thank you for your ideas and experience. -PC_Perg__ *.

  Dear friends:

  
  

  I have a frustrating time with my PC restarted at random. I have the log of events (System) such as details below.

  
  

   

  Log name: System

  Source: Microsoft-Windows-WHEA-Logger

  Date: 18/01/2011 18:24:55

  Event ID: 18

  Task category: no

  Level: error

  Keywords:

  User: LOCAL SERVICE

  Computer: PC

  Description:

  A fatal hardware error occurred.

   

  Reported by component: Processor Core

  Source of the error: Machine Check Exception

  Error type: error in Cache hierarchy

  Processor ID: 0

   

  View details of this entry contains more information.

  The event XML:

    

      

      18

      0

      2

      0

      0

      0 x 8000000000000000

      

      304971

      

      

      System

      PC2008

      

    

    

      3

      0

      0

      0xb64c400000000145

      0x3a1c86a0

      0 x 0

      9

      1

      256

      4

      256

      1

      256

      256

      256

      928

      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

    

   

  *****************PC  Spec********************************************

  Microsoft Windows [Version 6.1.7600]

  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

   

  C:\users\administrator>Systeminfo

   

  Host name: PC

  Name of the operating system: Microsoft Windows 7 Professional

  OS Version: 6.1.7600 Build 7600 n/a

  OS manufacturer: Microsoft Corporation

  OS configuration: Standalone Workstation

  OS Build type: multiprocessor Free

   

  Starting system: 18/01/2011, 18:24

  System manufacturer: power O.E.M.

  System model: O.E.M. power

  System type: X 86-based PC

  Processor (s): 1 processor installed.

  [01]: x 64 family 15 Model 15 Stepping 0 AuthenticAMD

  ~ 2266 Mhz

  The version of the BIOS: American Megatrends Inc. 1018.001, 30/12/2005

  Windows directory: C:\Windows

  System directory: C:\Windows\system32

  Starting device: \Device\HarddiskVolume1

  Local system: en - us; English (United States)

  Input locale: en - us; English (United States)

  Time zone: (UTC-05:00) Eastern (U.S. & Canada)

  Total physical memory: 2 047 MB

  Physical memory available: 933 MB

  Virtual memory: Max size: 7 139 MB

  Virtual memory: available: 5 910 MB

  Virtual memory: in use: 1 229 MB

  Office (s) swap file: C:\pagefile.sys

  G:\pagefile.sys

  Domain: workgroup

  Logon server:------.

  Corrections: 33 fixes installed.

  [01]: KB971033

  [02]: KB2436673

  [03]: KB2467659

  [04]: KB958488

  [05]: KB971468

  [06]: KB972270

  [07]: KB973525

  [08]: KB974332

  [09]: KB974431

  [10]: KB974571

  [11]: KB975364

  [12]: KB975467

  [13]: KB975560

  [14]: KB976098

  [15]: KB976325

  [16]: KB976662

  [17]: KB977074

  [18]: KB977165

  [19]: KB978207

  [20]: KB978251

  [21]: KB978262

  [22]: KB978542

  [23]: KB978601

  [24]: KB978886

  [25]: KB979306

  [26]: KB979309

  [27]: KB979683

  [28]: KB980182

  [29]: KB980195

  [30]: KB980232

  [31]: KB980408

  [32]: KB981332

  [33]: KB982214

  Network adapters: 2 interconnect installed.

  [01]: Marvell Yukon 88E8001/8003/8010 PCI Gigabit Eth

  Ethernet Controller

                                  

   

  [02]: 3Com EtherLink 10/100 PCI for complete PC management

   

  -NIC (3C905C-TX)

   

   

  C:\users\administrator >

  Are all drivers such as your network card, card video, printer and other drivers or applications all the updates?

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP