Hardware support higher provider version problem

Similar Questions

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• HP Support Assistant: older version give problems, how to upgrade to the latest version?

  Hello world

  My computer is a HP Pavilion laptop running Windows 7 Home Premium 64-bit. I have problems with one of the HP software programs pre-installed - HP Support Assistant. It appears once a week (it works for a while after Windows has loaded and then appears a screen) and I opened Assistant support and attempted to change his schedule, but he simply refuses to save the changes I have made to its settings. I noticed that the version number is 4.2.5.3. The program when searching for updates (manually triggered), cannot access HP servers, but fails to download updates, cannot gather information can not analyze the system and tells me that my computer has all the updates (which, given the number of HP Support Assistant version) ", is obviously not correct). So I ran HP Update (version is 5.001.000.014), but it says that I have the updates.

  Finally, via msconfig, I searched for HP Support Assistant, but he wasn't anywhere. However, while it was in operation (which slowed down the computer), I saw it listed in the Task Scheduler (under applications, I think).

  I did some reading, and it seems that the latest version of HP Support Assistant is version 5. How can I upgrade to the latest version? Other preinstalled software of HP update and HP Support Assistant that came with the laptop includes:

  Center of HP solutions-

  -HP Advisor

  -HP MediaSmart

  -HP Photosmart Essential 3.5

  -HP Smart Web Printing

  -the printer drivers and software for my HP all-in-one printer

  I disabled the following HP services as they could slow down the process of starting Windows:

  -HP Health Check (disabled via services.msc)

  -HP Digital Monitor (I think that it has been installed with the printer software. Disabled via msconfig)

  Can someone help me please? Thanks in advance for your time.-)

  Hello

  Most HP installers contain several languages and you should be able to choose German during the first part of the installation.

  I recommend you to uninstall your current version first by using programs and features.  When it is uninstalled, it is often a good idea to restart the laptop before proceeding with the installation of the latest version.

  All the best,

  DP - K

• You try to create VHDX or another format not supported for this version of the server

  Hello

  I have a problem with vWorkSpace do not load VM and I really hope that someone here might be able to add comments. We run vWorkSpace v8.5 on a box of windows server 2012 and v6.1 Hyper-V on Windows Server 2008.

  After running then changing the main image, I've updated the image of our cloud. Once the update of the virtual machine would not load, giving the below error

  End of the action (create) (failed to create. CreateVM: Unable to create the virtual machine of provided information. : CreateVhdxDisk: try to create VHDX or other format not supported for this version of the server. Path to the virtual disk: .avhd - call stacks - to Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)
  at HypervLocalExecutor.HvCreateVM (string strUser, strPwd, VmCreateData createData, String strDomainNameIP, VmResult String & result)
  to CHyperVClone.doClone (basic_string<>\,std::allocator > * nsHostName, basic_string<>\,std::allocator > * nsUsername, basic_string<>\,std::allocator > * nsPasswd, VmDefData * vmData, basic_string<>\,std::allocator > * strDomainIPaddress, NewVmInfo * newVmInfo)-> Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP))...
  5 March 2015 15:54:15 - 1392:8580511090155201372 - caught error: Stack Trace and stack Exception below:
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)

  We believe that it is somehow to do with Hyper-V under Windows 2008 and vWorkSpace running on Windows 2012 - the VHDX format is not supported by the version of Hyper-V server. A glance online confirms this. So my question is, how update the master image changed the format VHD vWorkSpace wants to use and is there a way to assign vWorkSpace don't know this format?

  I have widely in search of a solution to this line and not found anything it either, nor there seems a clear way in the vWorkSpace console to change that.

  Thank you

  Hello

  I suspect that you have created a snapshot on your model.  It is not supported, if you delete the snapshot so that the .avhd is merged to the vhd/vhdx and update the model in vWorkspace again.  If this does not work, you will need to delete the model of vWorkspace and then re-import.

  Concerning

  Paul

• Internal Bay wiring HP z800 does support higher speeds?

  Hello

  I'm interested if internal Bay wiring HP z800 supports higher speeds - 12 Gbit/s and 6 Gbps?

  Or should I use berries 5.25 "to mount and connect directly to the controller SAS 12Gbps with data speed has approved longer cables?

  Thanks for the reply

  HDD Bay Z800 wiring was not validated to 6 Gbit/s or 12 Gbps speeds for SATA or SAS drives.  The higher speed drives were 3 Gbps when the Z800 was released.

  It is better to use the berries, 5.25 "and connect the readers directly to the SAS 12 Gbps controller with high speed cables.  6 Gbps PEUT work with internal wiring, but 12 Gbit/s is too high.  Higher approved data cables speed superior to 6 Gbit/s and 12 Gbps avoids any problem.

• Graphics card does not support the required version of DirectX 9.0

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  =========================================
  It may be interesting to try to go to support
  site Web of MFG. your video card and
  search for course Windows XP Compatible
  drivers.

  (FWIW... If your computer is a laptop... check
  the manufacturer of the comput4er one
  updated video driver)

  If you do not know the make and model of
  your video card... check documentation
  supplied with the computer.

  Also, you can try the following steps...
  Reach... Start / run... type...
  Msinfo32... Press on enter.

  On screen Information System... Choose...
  Components / display...

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. Also, you should find
  and follow the installation instructions on the
  support site. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Not supported by this version of Windows

  I recently downgraded to windows 7 on my desktop Windows 8.1. I don't really like the feel of everything. Which is besides the point. When I reinstalled windows and went to update my drivers and I get a dialog box that says something in the sense of it are not supported by this version of windows. I really don't understand because all these programs and all the accessories that I ran fine until I upgraded to windows 8.

  I am running Windows 7 ultimate 64-bit. Can someone help me out here?

  I thought about it.  I have two floppies installation for windows 7 and I thought I installed the right disk 64-bit but actually installed the 32-bit. So when I went to install the 64-bit drivers and nothing worked. Problem solved, however. I appreciate that you get you it right.

• HP dv4 1551dx does hardware support for virtualization?

  Hello

  HP dv4 1551dx does hardware support for virtualization? If support, how it allows?

  Thank you

  To help you in your query, I found a link from microsoft on the Windows 7 operating system, itself. The link will provide all the necessary information about your query.

  http://www.Microsoft.com/Windows/Virtual-PC/support/configure-BIOS.aspx

  Please post the update of the solution for more help.

• My pc has detected the error: hardware changes would have no problem detected.

  Original title: my pc encountered chnges hardware could not be detected problem, when I visited my troubleshooting... im running windows7 family Basic... What am I going to do to solve this problem.

  my pc hardware met chnges could not be detected the problem when I visited my troubleshooting... im running windows7 basic family... what will I do to solve this problem, id already run microsoft fix in my pc but nothing is changed, I went to to see Device Manager if there is a problem, but I see no problem in Device Manager What does this problem mean? Please help me, your answer will be...

  Hi Javedpasha,

  1. when exactly you receive this message? Are you facing problems using USB devices?

  2. what Fixit did you run?

  3. What is the brand and model of your computer?

  4. What is the full error message that you receive?

  5. have you made a recent software or hardware changes to the system?

  This error occurs generally when the audio / sound does not work.

  Method 1:

  You can check the manufacturer's Web site and try to install the latest version of the drivers for the chipset, sound, network card and the display.

  For more information, see the article:

  Updated a hardware driver that is not working properly

  Method 2:

  You can also try to run the hardware and devices Troubleshooter and check if it helps:

  Open the hardware and devices Troubleshooter

  Disconnect external devices attached to the computer (except the keyboard and mouse) and check if it helps.

• A support for Acrobat version is not found...

  When I try to PDF a page in Chrome I get this message: "a support for Acrobat version was not found. Please install or upgrade to Acrobat 11.0.09 or later to use the extension to create a PDF file. "I tried the repair costs in the help, but the problem persists.

  Hey mariap84043823,

  Please note that Acrobat 9 is not compatible on platform Windows 7 this is why you may receive this error message.

  You can check the system requirements here:

  ucts.html https://helpx.adobe.com/x-productkb/Policy-Pricing/System-Requirements-Acrobat-Family-prod

  Kind regards

  Ana Maria

• The document _ is on a volume that does not support the permanent version storage.  You will not be able to access older versions of this document once you close.

  I recently started getting this strange message, usually when a Pages document is closed:

  «The document _ is on a volume that does not support the permanent version storage.»  You can access older versions of this document once you close. »

  All my research (apple.com and on the internet) have not enabled all the information on this message.

  Hi Larry,

  The 'volume' is a hard disk, a partition on a hard drive or a storage as a USB device.

  OS X automatically saves your document frequent while you work on it. If the volume of the device / it records on a summer formatted to allow 'versioning', you will be able to use Time Machine to open previous versions of your document. If it has not been formatted like that, you get the message see you, and only the current version of the document will be saved.

  Kind regards

  Barry

• What native video streaming protocol is reliable supported in recent versions of FF on Win/Mac?

  Hi guys,.

  I'm looking for a way to deliver HTML5 video streaming (video on demand).

  What native video streaming protocol is reliable supported in recent versions of FF on Win/Mac?

  We use JWplayer and reports that HLS cannot be read.
  Dashboard is supported?

  Is there a special kind that we define so that the browser responds positively on video.canPlayType () and plays?

  Best regards
  Svetoslav

  Hello, Svetoslav, does that help? :
  https://developer.Mozilla.org/en-us/apps/build/Audio_and_video_delivery/Live_streaming_web_audio_and_video#Video_Streaming_File_Formats

• It is only five years, since I bought the MBP. And "not Stopped Apple hardware support for this products just because they sell it?

  Hello

  I have a 17-inch, mid 2010 MBP.

  The internal DVD drive is broken.

  I contacted the Support of Apple. And sheet metal tech me that "Apple does not support any material for the MBP.» And what I can do is to get an "external DVD drive.

  It is only five years, since I bought the MBP. And "not Stopped Apple hardware support for this products just because they sell it?

  Ed

  < re-titled by host >

  If your computer is on this list it is no longer supported: Vintage and obsolete products - Apple Support

• I use trusteer for Bank report but it will not support the beta version firefox o 9, suggestions?

  I use trusteer for banking report, but it will not support the beta version of firefox 9, suggestions

  Trusteer informed me that a new version of their report software that is compatible with Firefox 9 is available at http://download.trusteer.com/Gcur4Wtnu/RapportSetup.exe

• After installing Firefox 8.0 I will be able to accept the Norton Toolbar add-0n or if it is not supported by this version?

  I just went to level to Firefox 8.0 and a message appears saying that Norton Toolbar is not supported by this version of Firefox. This literally means that it is not supported or I will be able to accept it as a 3rd party module approved? If it is not supported, you have plans to support in the future?

  Because the patch only for Norton 2011,2012 and 360, in order to obtain the fix, you must switch to product 2011 or 2012... the upgrade are free pireod license and you can activate your product with existing license
  Here is the statement for details on how to find your version, the upgrade and how to apply the patch

  • http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-8-support-for-Norton-toolbar/TD-p/581516