Hardware / USB port issues

Similar Questions

• HP Pavilion DV6-6C29WM / USB port issue

  including 2 of the 4 ports usb 3.0?

  Figured out, the 2 USB ports on the left are the SS USB 3.0.

  The 2 on the right are USB 2.0

• HP Pavilion DV6-1355dx: all USB Ports do not work

  All the USB port of my laptop, identified above, has stopped working. I tried in many troubleshooting recommended by the operating system (10) and support Microsoft centre but I could not solve the problem. Device Manager still show the (!) exclamation point for all USB ports. Can I have the drivers or a fix that allow me to re - install the Intel® ICH9 Family USB Universal Host Controller?

  Thank you very much

  Carla Hamilton

  The problem is resolved.

  I reinstalled Windows 10 a recommendation of Microsoft Community available to

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/USB-ports-not-working/275b9f17-fd56-4DBF-ba71-c674c68d7060

  I want to thank those who have made efforts to help me on this issue.

  Thank you.

  Hamilton

• Satellite A300 - USB port and fingerprints issue

  Hello

  I'm starting this thread that I have problems with my fingerprint reader and my USB port.

  I have a Toshiba Satellite A300-C01 laoptop. It was purchased in September of last year. I have not used it much except for the first week I had it, I've been away (Overseas), and I didn't take my laptop with me (I took a former I). There is no chance that the laptop has been used so that I was absent because I live alone and that the cell phone was simply sitting in the computer room.

  I started using it again about 3 weeks. Around a week ago, I noticed a pop-up (bottom left of the screen) telling me that a USB port had problems. I put my FlashDrive on the first USB port and at first, it was not recognized. I tried with another flash drive I have and who has been recognized. However, every time I start the computer I get who pop up telling me that there is a problem with the USB port.

  I also met a problem with the fingerprint reader. A pop up appears in the lower left side of the screen and say that the fingerprint reader was having problems. Happened since then that the problem with my USB port began to appear. About an hour ago, I checked the Device Manager and the fingerprints fingerprints/biometrics scanner does not appear in Device Manager.

  Has anyone else had this type of problem?

  What did you do to solve it?

  I would appreciate comments that I have no other choice at this time until Monday when the Toshiba support is available (they are available Monday to Friday).

  Thanks in advance,

  Deanne.

  First of all, you should try to update the chipset drivers and software of fingerprint. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If it doesn't work you should try to update the BIOS. Check the Toshiba site for an update.

  In the worst case, you must reinstall the laptop with the Toshiba recovery disc. So you can make sure if it s a hardware issue or not.

• Issue R850 2R satellite USB ports-

  Hello!

  Because today, I have problems with the USB ports after several months of trouble free use. I started pc and everything worked normally for the first 10 minutes.

  I got the system message: "1 USB Port stopped working.
  Please disconnect device attached to it. "(something like that), and I didn't that I pressed OK option.

  After that all my ports (I had the only mouse and keyboard) stopped working (out of 3). I tried troubleshooting, disconnect devices and plug their return, deactivation and which allows once again in the device manage anything.

  The only thing that helps mobile computer restart to get the same error after 10-20 minutes.
  I did not anything unusual on laptop today. : S

  Hello

  I found some interesting tips from Microsoft on similar USB issues.

  + Disable and re-enable the USB controller +.
  + To disable and re-enable the USB controllers, follow these steps: +.
  + 1. Click Start and then click Run. +
  + Note if you are running Windows Vista, click Start and then use the search box. +
  + 2. Type devmgmt.msc, and then click OK. Device Manager opens. +
  + 3. Expand Bus USB controllers. +
  + Note that you need to scroll down to find this point. +
  + 4. Right-click the first USB controller under Bus USB controllers and then click on uninstall to remove it. +
  + 5. Repeat step 4 for each controller USB is listed under Bus USB controllers. +
  + 6. Restart the computer. After the computer starts, Windows will automatically check for material changes and reinstall all USB controllers that you uninstalled. +
  + 7. Check the USB device to see if it works. +

  Other advice:

  + You can disable the USB selective suspend feature to work around the problem by modifying the registry. The USB device does sometimes because of a race condition in the selective suspend feature.
  + 1. Click Start and then click Run. +
  + Note if you are running Windows Vista, click Start and then use the search box. +
  + 2. Type regedit and then click OK. The Registry Editor opens. +
  + 3. Locate and then click the following registry subkey: +.
  + HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servi ces\USB +.
  + 4. If the DisableSelectiveSuspend registry entry is present, double-click it. If it is not present, create the entry. To create the entry, follow these steps: +.
  + a. On the Edit menu, point to new, and then click DWORD. +
  + b. type DisableSelectiveSuspend, and then press ENTER. +
  + c. On the Edit menu, click on change. +
  + 5. In the value data field, type 1 to disable the selective suspend feature, and then click OK. +

  Restart the device and test again

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Windows detected new hardware wizard appears each time I try to connect an external hard drive via the USB port.

  Whenever I try to connect an external hard drive into a USB port, Windows detected new hardware wizard will appear. He then not recognize the external drive at all. It does not appear in disk management. In Device Manager, it is listed as a 'device' USB bus controllers not. Under "other devices", there the question mark yellow and says the device is not configured correctly (code 1). External hard drive works fine on other PCs. It's a plug-and-play device. Port and USB cable work fine with other devices. Just this external hard drive has never worked on this PC.

  Hello

  I suggest that you try to remove USB controllers to the clean boot state and control.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  See also:
  http://support.Microsoft.com/kb/310575

• USB ports do not recognize hardware

  I have a desktop running Windows XP and a few months ago he suddenly stopped to recognize the external hardware on 2 of the 4 USB ports.  The two other USB ports work.  Is this a software problem or could the two USB port went bad at the same time?  I plugged a USB stick in the USB work and it does not work, but the mouse I reconnect works very well.  This same USB works on another system.  I'm puzzled.

  Thanks for your help!

  I have a desktop running Windows XP and a few months ago he suddenly stopped to recognize the external hardware on 2 of the 4 USB ports.  The two other USB ports work.  Is this a software problem or could the two USB port went bad at the same time?  I plugged a USB stick in the USB work and it does not work, but the mouse I reconnect works very well.  This same USB works on another system.  I'm puzzled.

  Thanks for your help!

  If some ports work and others do not, it is most likely a hardware problem, not a Windows.

• How can you stop safely remove hardware to appear when there is nothing connected to the USB ports?

  Orifginal title: Aggrevation

  How can you stop safely remove hardware to appear when there is nothing connected to the USB ports? It is causing my screen lock and give an error does not.

  Hi ElginCarelock,

  You can try to restart the computer and check.

  Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer and check.

  Hope this information is useful.

• Satellite A200 - issue USB ports - failed to read the USB

  I have a Satellite A200 series - and when I insert a dongle in the USB Ports - nothing is read or seen when I go via explores.
  In this case for an external mouse or my USB storage - yet it will recognize my Ipod when I need to recharge the battery.

  All of the suggestions, I'll be very grateful.

  See you soon

  Li Li

  Hello

  First of all, it would be interesting to know if you are using the OS preinstalled Toshiba.
  Second, you must check the status of the USB controller in Device Manager.

  I recommend you to unplug all external USB devices to the laptop.
  Delete all the USB root hubs and Device Manager USB host controllers.
  Then restart the laptop and wait until Windows will reinstall all USB ports again.
  Then you can plug in a USB mouse or USB again.

  Check it out

• Compatibility issue with stereo w/USB Port (and radio too) with the "rocket" GB 2

  I bought a 2 GB rocket. In MSC Mode, I downloaded a few songs and I went to connect to my Sony MHC GT222 (with the USB cable), and he said "No Media". Read the manual, I found that the MHC can only read on devices FAT16 or FAT32. My question is this:

  Can I format the "rocket" in FAT16 or FAT32? Then what? Download a firmware update, update day, then format the device menu?

  Or should I just format the device menu? The unit is Sony too, so the same restriction applies.

  Oh, and I can plug a 4 GB microSD card in the "rocket" GB 2? When I bought it, told me that it can only support 2 GB microSD.

  Thank you for your time.

  I believe that I have found a workaround. Please have in mind that it is a Sony stereo or a USB car stereo.

  And remember also that Sandisk did not test compatibility with Sony, and so this workaround might be replaced by a firmware update.

  It worked for my Fuze 2 GB.

  • Have a LCD card and put it in the slot. Preferably a 4 GB, 8 GB or 16 GB, if you have the resources. Reasons later.
  • You connect Fuze on a USB port.
  • Under Windows XP, my computer appears a Sansa Fuze removable drive (say: and a removable drive (let's say I the removable drive after the "rocket" is the LCD map.))
  • Now, the removable disk in a directory called MUSIC (usually the "rocket" already done this a when you plugged the micro card) drag and drop all the music files you want to access.
  • Remove the "rocket".
  • Wait so the "rocket" updates the music database.
  • With the USB cable, connect the rocket in the Sony stereo / car stereo. Press Play. The player is available as a silent reader, and music should start playing.

  Why the card must be equal to or greater than 4 GB? Because these cards are formatted in FAT32, and these materials are accessible by the Sony with USB ports. Why with a card? Because the Sony apparently are programmed to recognize a player as a SOLID-STATE drive or an adapter for an SSD, not until the case of the "rocket" (not the technical details, but it's more understandable) and in this case the Sony, even once, apparently recognizes the "rocket" as an adapter for one SSD drive, so the internal memory is invisible. A Pro with this is that the "rocket" can be used in a way as a music for personal tastes in the internal memory and music for work in external memory if you have a Sony with USB port in the car or at the office.

• HPE 500f broken Front USB Ports. Need hardware

  I broke all my front USB ports. Does anyone know where to find replacemnts? I can't find parts in the manual or on the website of HP.

  Thank you.

  HPPartSurfer lists the USB port double room like 517181-001. See here.  Used for sale

• Re: USB Ports on my S Satellite series do not work

  I recently bought a toshiba satellite s-series and the usb ports don't work - code of host controller compatible usb xhci 39
  I tried the things:

  -research on the internet for all issues
  -Search the support site for drivers but they do not provide drivers usb for my laptop.
  -Update and uninstall the driver.
  -"Add legacy hardware" via Device Manager

  any help is greatly appreciated

  Post edited by: raafen

  If you need assistance, you must post the name of the exact model laptop and the OS you are using.

• HP Envy x 360 (M1V68UA): USB Ports all failed - resembled HW failure, but resolved by reinstalling a driver

  This post is an explanation of the complete absence of the laptop (2.0 & 3.0) USB ports and the later hotfix.

  Suspecting a hardware failure, I ran the Diagnostics UEFI and received confirmation of a default by a character 27 failure code.  This type of information is supposed to be useful to someone, but I couldn't find any documentation on this failure on the Web code and technician HP customer care has never offered an explanation.  The ID of the failure, I received was:

  0GF87X-7NW88A-GXGJMF-8D3Q03

  I made arrangements to ship the laptop to HP repair, but while waiting to receive their shipping box, I continued to research.  I happened to run System Mechanic from iolo and noticed a tool "Toolbox |" Recover | Troubleshooting of the system"that took me as a result of convenience store window 10.  I ran the hardware and devices troubleshooter, and confirmed a problem with the USB ports.  But, surprisingly, the fix was to install the latest driver for the Intel USB 3.0 eXtensible host controller (USBXHCI. (SYS).

  Once the driver has been reinstalled, the USB port problem has been resolved.  He worked for 3 days and I was able to back up my laptop on an external hard drive into a USB port, as I usually do.

  So if you see a problem with your USB ports, which can resemble a hardware failure, it is better running of the utility window hardware & peripheral troubleshooting.  It can save you an unnecessary repair work.

  Best regards, Mike
  
  

  @mike_d177

  Welcome to the HP Forums
  
  I would like to take a moment and thank you for the use of this forum, it is a great place to find answers.
  You have the best experience on the HP forum, you can also visit our Guide of Forums from HP for the first time here? Learn how to post and much more.
  
  As I understand it you had conducted a test of material using the UEFI diagnostic tool and received a failure ID, however, you install the latest driver and solved the problem.
  
  I'm glad that worked for you, even if you keep the only common, the ID of the failure you captured represents a "Communication error" device on devices such as GPS, switch and/or USB, HUB, Modem, network card, network drive, PCI, PCMCIA card.

  Install the most recent driver is one of the first steps to solve the communication error, however, if the problem is intermittent because it sometimes a repair would be the best way to go.

  Click here to see details on the HP Service Center.

  If you are unable to reach a resolution, please click on accept the Solution to help others with similar issues.
  If you like my assistance, please click on the thumbs up icon.
  The two icons are below this post.
  
  Have a good day Ahead.

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you