have an IBM Thinkpad Edge 030245u with Win 7 PRO 32 bit. When you go to close windows from the icon, then select System closed, only restarts.

Similar Questions

• ThinkPad edge E530 to Win 8 pro upgrade failed

  I tried to update my E530 to Windows 8, but the installation stops at 29%, any help?

  Take a look at this thread: http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Cannot-upgrade-to-win-8-pro-on-thinkpad-twist/m-p...

  You can try the steps in the post #2, because they seem to have worked in a similar situation.

  Kind regards.

• How to Win 7 Pro license on a laptop HP 4540 s that came with Win 8 Pro 64 bit (no COA)?

  Ok

  So, I bought a nice new HP laptop... 4540 s I5 - very nice - but it comes with 8 Pro 64 bit Windows which unfortunately will not run the basic things I need this laptop due to driver problems. So no problem. I have right to demotion on Windows 8 Pro 64 bit for Windows 7 Pro 64-bit. I have Windows 7 the retail media and an existing permit, that I can use during the installation (although this license is also used on my other machine).

  So, I install windows 7. No problem.

  Add all the drivers for your laptop. No problem.

  Now comes the part where I'm supposed to install the license to activate.

  I use the license key, I had already activated on my other laptop (although that is running windows 7 32 bit).

  It allows! Shock. It should have my other machine is the use of this license.

  In any case. I want to be able to use the "downgrade" on the Windows 8 Pro 64 bit license rights and apply it to the installation of Windows 7 Pro 64 bit I am now running. Althougth it is allowed there is no any procedure for anyone without a physical COST windows 8 for the upgrade to Windows 7.

  If someone please advise how I can solve this problem. I have called Microsoft a few times and seem to end up on hold because no one can answer my question.

  How register you an installation of Windows 7 when you do not have a certificate of authenticity windows 8?

  Surely someone must have hit this already.

  Please notify.

  Adam

  Well,.

  subsequently talked to someone in the Microsoft technical support who told me that I should talk to HP in order to obtain a product key valid windows 7 pro 64. However as I expected maintain for nearly an hour he was good enough to go through the process on behalf of HP and was able to give me a new key.

  But if you need to do this, then I guess the official course is to contact HP and ask for a key. And apparently they should also be able to provide you with support of Windows 7 If you ask.

  hope that helps.

  Announcement

• Window Popup with strange characters when you want to play music from the cloud

  When I try to play music on the cloud (music downloaded on my computer), I get a popup with some strange characters. It was working fine 2 days ago. Nothing has changed on my computer. I tried uninstalling iTunes and reinstalling. Shows the problem. Any help would be appreciated.

  This is what looks like the pop-up window.

  

  PS - all anti-virus software are up and running.

  As an addendum, I tried to download music (by clicking on the cloud icon, which then shows an arrow pointing downwards). This popup has shown once again.

  Then I thought maybe it was having a problem with my account or my computer don't think she was allowed. So I checked my account login, and I was connected. Then I tried allowing my computer and this popup appeared again. I then tried my scroll wheel and it seems that it is a right screen. I guess that is the lower right button 'accept' but I'm not confident in the present.

  Strange things brewing.

• Is there a replacement for Digital Persona software? I have 1000 DV8T Win 7 Pro 64-bit thank you!

  I have the latest digital version of Persona on the HP website, but it is no longer supported on Firefox or Chrome.  The latest version of Firefox it worked with is no longer in charge and crashing.  Most of my site connections are made by fingerprint, so it's important to me.

  I have a quad core DV8T 1000 running Windows 7 Professional 64-bit edition.

  Any suggestion would be appreciated!

  Thank you.

  Hey, Crowe,.

  Yes, there is a replacement.  Finally.

  I tested on a HDX18t under Windows 7 Ultimate - 64-bit.

  I'm about to order some more of them to test on a desktop computer and a dv9000...

  Edits January 29, 2014 - AuthenTec is swallowed by Apple, Mini-Fingerprinter is now available at Softex, the people who brought us HP SimplePass Version 8.x

  You must buy a fingerprinter $ 10 (cost US) and use the AuthenTec TrueSuite software.  Looks like and acts like the software of HP SimplePass 5.1.x (first version - primitive and meh, but it works!)

  ==========================================================================

  Procedure of Installation TrueSuite SimplePass Eikon mini - update of Firefox

   

  AuthenTec Fingerprinter Mini Eikon

  The Eikon Mini Fingerprinter is about 10 US $ + shipping costs (about 6 dollars).  It comes in the mail.  Once you have the only piece of hardware, the software is downloaded.  Hold off or just download the software and try it - access code is on the card provided with the fingerprinter.

  The software defines right up.  Assuming you are running Windows 7 or Windows 8 +, it should be virtually "load" and "go".  I have entered a few fingers, tried connecting windows, restarted several times...

  USB Mini (by Softex) fingerprint reader

  This software has been tested with Firefox and is supposed to work with Chrome.  There is no reason why it will not work with Chrome.  The installation is probably the same - SimplePass follows the same rules regardless of the browser with which it is associated.

  • Install the Mini Fingerprinter port in any USB 2.0 (or 3.0) that should be
  • Download AuthenTec software
  • He Set up, if you like - test connection to Windows...
  • You can update Firefox - at least off V26.  Lock it down for updates (just in case), if you wish.  It's completely Softex software, so Firefox can simply continue to work, but I don't trust Firefox - they update frequently for my taste and things just stop working too often for my taste.
  • NOTE: No Addon FingerFox is used with this version.
  • You can specify that you want to update all your Addons, with the exception of Digital Persona.  You don't have to actually remove, just do not select to 'activate' the addon during the update of Firefox.  It will not work and just delays the update in a few seconds.

  After Firefox update...

  • If you have already installed the TrueSuite software: you'll probably have to "Reinstall" the software TrueSuite still after you update to Firefox.  The driver is OK.  Reinstall the software again over what is on the system.  When the TrueSuite reinstall menu box opens, tell him to 'Fix' the installation.  Regardless of the options you have done previously, that's to say, the windows login, will stick.

  Now you should be able to create a Webcard for, say, your e-mail address or another site... maybe your user name for this forum.  Test and repeat...

  Limitations:   The only problem with this version of TrueSuite software I have found so far is the primitive character of the software compared to the "HP" style more solid software SimplePass 5.3.x - 5.4. + relative.  5.2 TrueSuite is reminiscent of HP SimplePass 5.1.x.

  Assuming that you can get this Mini Eikon where you are, it can work well and let you into the 21st century with real SimplePass connections.

  The Mini also works with HP SimplePass Versions 6.x and the new Softex wrote HP SimplePass Versions 8.x

  ==========================================================================================

  Let me know what you think...

  I hope this helps!

  Good luck!

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• I use win xp pro 32 bit and want to update for win 7 pro, how can I do? I have

  Hi I bought a new PC and need to upgrade all these years I was with win XP pro 32 bit, I need to switch to Win 7 pro. 64 bit...
  what I have to buy a new copy of license or just pay the amount of the upgrade to the new version of windows? If so how do I do that?

  You will need to purchase a new license, unfortunately, you can't buy just the product key, you'll need to buy the package, given that Microsoft is no longer selling just the key.

  Full version-

  Microsoft Windows 7 Professional

  Version upgrade-

  Microsoft Windows 7 Professional upgrade

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

  ----------------------

  Resources:

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• Installation Win 7 Pro 64-bit

  Greetings:

  I have a X 200 7448 - CTO preloaded with Win 7 Pro 32 bit.

  Would it not possible to install the 64 bit on my system?

  Any input is much appreciated.                  `

  Yes it is fully supported. You can approach this upgrade in several ways.

  1. If you want to keep the recovery to win 7 pro 64-bit partition, so you can order the 64 bit version of the media of the Lenovo service recovery.

  2. If you do not care the recovery partition and want to keep the cost of upgrading to a bare (free by the way). Then download the iso 64-bit windows 7 here:

  http://Forum.NotebookReview.com/Windows-OS-software/428068-legal-Windows-7-download-links-just-like-...

  Then follow these instructions to install all drivers.

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-74108

• Install an SSD in an Inspiron 3650 I7 6700 16 GB Ram 2 TB hard drive Amd R9 380 graphic and running Win 7 Pro 64-bit

  Hello:

  I have the above referenced PC and want to add an SSD (boot with OS drive).  I would like to make this my c: drive ssd.  I want to keep the Windows 7 operating system.  I made the disarmament recovery disks I opened the PC.  I don't want to win 10.

  Could someone with their infinite knowledge teach me throughout the procedure with pictures if possible?  What parts do need me if any?

  Thanks in advance

  Tom

  I thought I was doing a 512 GB SSD.  The system came with Win 10 Pro 64 bit installation floppies, but I'm used to and prefer to use Win 7.  The idea of cloning seems interesting.  In fact, it looks to the ticket.  What cloning software is recommended.  The priority of the boot in the BIOS change after cloning?  I am concerned with what type of SSD should I purchase (interface, transfer rate, etc.), what cables, if any, and which adapters will be necessary?

  At work, I have all my computers run with SSD (OS/startup) and they run like rockets.  This new computer runs great, but with a SSD for the start, program files, "scratch disks", I'll be in the drive hyper.  I'd be in Mary for a bargain price.

  Yet once again, thank you very much for you answer quickly.  I have several Dell optiplex computers in office and did not have a problem.

  Thank you once again to Osprey

  Tom

• How to enable the memory full use in Win 7 Pro 64 Bit OS

  Hello.

  I have a desktop with Win 7 Pro 64 bit and its installed with 8Gigs of RAM above, but when I check in the properties of the computer it shows only 8 GM installed and 3.86 inuse.

  Can anyone suggest me how to get the memory of 8 GB in use. ?

  Concerning

  Ishaan

  Why do you need to use all of your RAM?

  Are you trying to find how to use "RAMDisk"? The link below is for one of the
  software available. A search can find a free version.

  http://memory.Dataram.com/products-and-services/software/ramdisk

  The first I've heard talk of RAMDisk was today in the thread below.

  "You not use RAMDisk?
  .

• can't add programs to CentOS 5.5 64-bit VM on Win 7 Pro 64-bit

  I was able to install CentOS 5.5 64 bit VM on a Dell precision M6500 with Win 7 Pro 64-bit. Installation was surprisingly simple, and I was ready to install more programs that I need. However, whatever programs I tried to add, I got an error message saying basically I was running from disk space (see attached photo). I think there will be a fairly simple solution to this.

  FYI, I use VMWARE workstation 7.1.3. c. My hard drive is encrypted (company policy), if that makes a difference. I used to be able to run dual-boot with Windows and Linux, but due to the encrypted hard drive, I decided to go with virtual machines. And I absolutely have to go 64 bit for my applications.

  The use of the virtual machine is basically to start simulations physical high-energy particles. Sometimes, I may need to distance and access guestOS office, but probably it is not shared with anyone.

  If you see better VMWARE or other products that meet my needs run linux, freel free to respond. From my limited experience with installation, VMWARE workstation came more remote with "usable" OS installation. I tried virtual box and VM Win7 all come short, even at the stage of the installation.

  Thank you very much.

  Hello and welcome to the forums.

  There is a simple solution.  Use the settings of the virtual machine to expand your drive - select the disk and choose the Utilities menu.  The virtual machine must be turned off to do this.  From there, you can use gparted or LVM to resize partitions if necessary.

  Good luck!

• 8.14 Acrobat Pro crashes (Win 7 pro 32 bit) Tiff conversion

  I can not the scanned images to TIFF (registered to the PC running Win 7 pro 32 bit) to convert to pdf format.

  The following details with the error message:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: Acrobat.exe

  Application version: 8.1.0.137

  Application timestamp: 46444c 82

  Fault Module name: ImageConversion.api

  Fault Module Version: 8.1.2.86

  Timestamp of Module error: 4788536e

  Exception code: c0000005

  Exception offset: 00074a 13

  OS version: 6.1.7600.2.0.0.256.48

  Locale ID: 1033

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Any help would be greatly appreciated

  Thank you

  Adobe Acrobat does not support this format TIFF.

• new computer with win 7 pro when it is connected to a Flash drive or external hard drive poster, you have currently not authorized to access this folder or location is not available

  There are now 4 computers in front of me.

  Two are laptops 17 inch hp (consumer)

  Two are workstations mobile hp 17 inch (company)

  On the consumer books, I can view the files on my external hard drive 1 to and 1 GB player.

  On the company workstation (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows FreeAgent GoFlex drive opening (h :)) properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (g) properties

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  This problem has been resolved.

  Right-click all methods have not access external external hard drives and flash drives.

  Sharing, permissions, ownership, administrative changes, all method all failed.

  This problem has been resolved by higher HP product support.  Other levels of support were not able to diagnose the problem or fix.

  The problem has been resolved by:

  (1) determine that he was not a NTFS problem

  (2) using the msconfig to isolate a single service

  When the unique service has been disabled the files on any external drives have been available.

  The service of the problem was the HP Client Security.

  This HP Client Security in its default value is set to deny access.

  Then right-click on the drive and change the permissions, ownership, to administrators, using everyone etc. will fail because they are all trumped by the HP Client Security that is set by default to deny access.

  When that client security is changed the drives become available.  It is not information about this when using the computer and this can be learned by trial and error.

  I hope this helps all those who have z book 17 mobile workstations or HP computers that are equipped with client security.

• How to set the power settings - Satellite Pro A10 with Win XP Pro

  I an A10 Pro of the Satellite with Win XP Pro installed and cannot access the power settings. When I go into the power settings in Windows, I get a msg telling me to use Toshiba Power Saver and Win power settings are grayed out.
  I installed pwrsav-spa10-xp-60007-.zip which tells me that it is installing the Toshiba Power Saver, but always Win power settings are greyed out and I can't find no separate application "Toshiba Power Saver".
  The BIOS shows ' version of BIOS ACPI = 1.30.
  Can someone advice how to change the power settings please?
  Thnx.

  Dave

  Hi Dave,.

  You have the "Toshiba common Modules" installed? They must first of all for many models of Toshiba, and power settings module is an add-on for that.

  If you do not have the appropriate restoration or the utility CD handy, the drivers can be downloaded from the Web from Toshiba website.

  I hope this helps, let us know how you go

  Weezle

• an error "file does not have a program associated with it for performing this action" when you click office and recent places.

  Original title:

  Win7 victory explrer click dsktop & mployment plces & get eror msg file is not a CDSA wth to prfrmin ths field prgrm. pls instl one prgrm so is alrdy instld Credit Union assc ltvds cntrl pnl prgrms

  I don't know how to fix. Help, please.    Win7 windows Explorer click

  Office & recent locations & grterror msg:
  This file does not have a program associated with it for performing this action. Please install a program or, if it is already installed. create an asssociationin the default programs control panel.
   
  Information given in the new thread:
  Error Msg When you try open office spaces & recent since the win Explorer

  when im in windows Explorer and click on the desktop or the recent places the link I get a msg of error and they will not open, but all others open. I posted pictures of error msg to skydrive yesterday.

  Hello

  Welcome to the Microsoft Community Forums.

  I see you've found an error "file does not have a program associated with it for performing this action" when you click office and recent places.

  1. Have you made changes on the computer before this problem?
  2. What is the full error message?

  I suggest you to report to us the screenshot of the Advanced window so that we can understand what exactly the situation.
  
  See:
  Use SkyDrive download collected files and post screen shot/image
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  The average while you can try the following steps and check if the error reappears.

  Method 1:

  Step 1:

  Start the computer in safe mode and check the number.

  Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

  Follow this link provided below to start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  Put the computer to boot and check if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the KB article provided above.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  It will be useful.

  Back with the details so that we can help you further. We also indicate the result of the suggested steps.

• I have a new desktop computer HP with Vista Home Premium 64-bit, with 8 GB RAM and when I try to start Zoo Tycoon 2, he won't play, said that I have no memory system.

  I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message:

  You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected)

  Y at - it a patch? I have read many "Workaround" and none of them work. I tried to run in Windows XP compatibility mode and it didn't work.

  Hey tprefling,
   
  Thanks for posting in the Microsoft answers site!
   
  Right-click on the zt.exe file and choose "Run as Administrator" to launch the program.
   
  See if you are able to play the game.

  If this does not work, turn your computer to clean the start State and see if the fgame plays very well.
  
  To put your computer in a clean boot, follow these steps:
   
  Note: If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.
   
  For more information about the clean boot, see the link below:
  http://support.Microsoft.com/kb/929135
   
  In addition, change the size of virtual memory and see that helps. For more information, see:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  For more details on the Zoo Tycon game, consult the following link:
  http://forums.zootycoon.com/forums/default.aspx
   
  I hope this helps!
  Gokul T - Microsoft Support