HAVING A PROBLEM CONNECTING TO MY LAPTOP TO MY NETGEAR WIRELESS PRINT SERVER

Similar Questions

• HP laserjet pro m521dn mfp: HP jetdirect 2700w USB wireless print server connectivity

  I just bought a M521dn Pro Laserjet and a Jetdirect 2700w.  However, the M521dn has only a USB port that does not recognize the Jetdirect.  However, the Jetdirect 2700w is listed as an accessory for the M521.

  The Jetdirect 2700w works with the M521dn?

  Is there a hidden usb port, I am not find to connect to the wireless print server?

  Help, please

  Thanks in advance!

  Hello

  HP jetdirect 2700w USB wireless print server support M521 series including M521dn. Your printer has 2 USB ports, one on the front (use for direct printing without a computer) and the normal port is at the back (not flat port, I usually call it as 'round' port' and you need a normal/standard USB printer cable to connect to the Jetdirect 2700w (round end in the printer and the flat end to the Jetdirect 2700w).)

  

  Concerning

• HP15 AY015TU: Im having a problem with my new laptop keyboard.

  Im having a problem qith the 2 / @ and keys 3 / #. Shift + 2 gives me "instead of @." And shift + 3 gives me symbol £ instead of #.

  Hello

  Looks like you got the ill-defined keyboard layout - IE Uk keyboard for a U.S. keyboard.

  If you have more than one keyboard layout in Windows 10, you can switch between them by keeping the CTRL key and pressing the SHIFT key

  You can also change the layout for your keyboard as shown in the link below.

  Change of keyboard - Windows 8 & 10

  Kind regards

  DP - K

• at & t u-verse, & having problems connecting my Officejet 4500 to my current wireless network

  Hello

  I just got an Officejet 4500, and I am unable to connect it to my current wireless network.  I'm AT & T U-Verse so I use 2Wire equipment.  I have a Mac Book Pro, and I'm on Mac OS X operating system 10.5.8.  When I try to connect, I get an error message saying something like "Failed to connect."

  In the past, I had problems connecting my Airport Express to 2Wire.  In order to make it work, I connected the router 2Wire and changed the WPA - PSK (TKIP) security settings and WPA2 - PSK (AES) to just WPA2 - PSK (AES).  My Airport Express was able to connect without any problems.

  Please help me to connect my Officejet 4500 to my 2Wire router.  I note also that I'm not really tech savvy so I need instructions are written in simple terms.

  Thank you in advance for your help!

  Marc-Antoine

  Tanisha Hey! Try as part of this support document: AT & T 2Wire routers: "Login failed" or "Can't find printer" Message, or cannot connect to a wireless network

  I hope this will get back you on track!

  -Sean

• How to print from my HP laptop for my Canon Wireless printer?

  I have a Canon MX410 Wireless printer is currently connected to my HP desktop computer through a USB port.  I would also like to add this printer to my laptop but it can not know!  I tried the Office of the instillation of the printer, but it did not work.

  Most wireless printers turn off wireless when the printer is connected by USB.

  I could not actually find a statement to that effect in the Canon documentation I've come briefly, but I suspect that is what is happening.  Unplug the USB cable and see if you can now get the printer works wirelessly with the laptop.

  If it works, re - configure the installation on your desktop to access the printer through a "Standard TCP/IP Port". It may be easier to simply uninstall the printer on the desktop and reinstall it by selecting "print via network" or whatever the Canon calls it during the installation process.

• Not able to print fron laptop computer to the wireless printer, but he can go to another laptop

  Hello

  We feel a sense of problem one of our laptop of HP Pavilion dv7 - 6163cl.  I used to be able to print from it, but tried yesterday and nothing happens.  We have a second HP Pavilion Notebook PC and are able to print from this one without any problem.  The. We strive to print is a HP Officejet J4550 all-in-one wireless printer.

  When I choose to print a document, I can see the printer in the list (it is default printer).  When I highlight it it is know, the status displays "error".  If we try to print, nothing happens.  It's not even an error message.  I have tried to solve this on my own, but will have no chance.  Help, please.

  I'm on Windows 7 64-bit OS

  Thank you in advance.

  Wanted to just contact you and let you know that I could get this problem is resolved.  The problem came from Norton Internet Security.  There was a problem with Norton and I needed to uninstall and reinstall.  Once I did that the printer started working again.  Thanks for your help.

• When Windows 7 SP1 tries to connect to more than 300 printers on a print server, printers, and devices hangs.

  Original title: device and printer crashes

  Running Windows 7 SP1 tries to connect to more than 300 printers on a remote print server and printer hangs and nothing is displayed.  If the connection to 200 or less, no problem.  Is there a difficult cut offshore for how printers windows 7 can connect to

  Hello

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 Hardware Compatibility TechNet Forums

• laptop is not recognizing wireless printer installed

  I use Windows 7 and I have a wireless printer. I installed the printer eleven times. Every two days the laptop no longer recognizes the printer so I need to reinstall it to use it. I tried to remove the older printers after I installed the printer. I am able to delete the printer, but it manifests itself later. How can I get my laptop to remove the additional printers (which refer to the same physical printer) and install the wireless printer without reinstalling every two days?

  My last laptop worked fine with the printer wireless, and there's another user who connects to the printer wireless also. I have established that it is my system not the printer.

  Any help anyone could offer would be great.

  Thank you!

  Melanie

  If you have 10 printers showing removing all but one. Select Start, Control Panel, devices and printers, right-click on the printer icon and select Remove the instrument.

• Router to connect to a wireless print server

  I just got my EA3500 router. This work is very well but I can't connect the router to my WPSM54G print server. I tried DHCP IP, IP manual, for security, I tried WPA and WPA2, and nothing. How can I solve this? TKS, Antonio

  First, turn off the firewall and Antivirus on your computer and re-run the Setup program on your computer...

  If, you are unable to find the IP address of the print server... You can manually configure all the settings on your print server... Here is the link to access the PrintServer Setup page: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=8734f16c5ec1476f9d72e663a6f16c57_4129.xml&pid=80&r...

  IE open on your computer and in the address bar type the IP address of your WPSM54G and hit enter, leave name empty username & password use admin lowercase...

  Once the connection to the print server configuration page, you can match the settings of your router for the WPSM wireless... Once this is done, you can set the static IP address to your WPSM i.e 192.168.1.80... Once done with the parameters of this...

  Now, rerun the Setup program on your computer... and click on "Computer Configuration", this will install all the drivers related to your print server...

  If stil you can not run the Setup program on your computer... Click on the link and follow the instructions how to add the print server on your computer port: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=1da99b59a04c4bad97b05f96f5ca2769_4126.xml&pid=80&r...

• problem connecting to my laptop

  I can't log on to my HP laptop, whenever I type my password it says "the service user profile service has no logon. User profile cannot be loaded, please help

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Having a problem connecting to the internet with Workstation 6.5

  I have a problem with access to the internet on Windows Vista Business x 64 on VMware Workstation 6.5. My computer is Windows 7 professional 64-bit. I left everything default settings. On my host computer, I have my connection wireless connected to my router to get a IP through DHCP and it is connected and on the internet. I also have more than 2 connections, VMware Network Adapter VMnet1 VMnet 8 are listed as no access Internet under Access Type and are listed as unidentified network. On my guest OS I am connected via Nat and when I start first of all my virtual machine that my network card shows as connected with local and internet access but after 5 seconds it only local changes. My host uses a system of IP of 192.168.1.x and my guest operating system is using 192.168.19.x. I don't know where to start. I tried google and know disp. I hope I have not confused things by giving too much information that can be irrelevent and maybe omitted important things. Help, please. Thanks in advance.

  Check if the host firewall disabling resolves. Also (I know you use not packed, but check anyway) http://kb.vmware.com/kb/760

• Printer problems connects to the laptop

  Hi I just bought a new Epson XP320, and I get an error message saying "printer not responding" or "cannot find the printer."

  I had this problem with the previous one printer Canon and the store offered me a refund or a new printer, I chose the new printer (different brand) and now have the same issue.

  What is the Apple mac? I'm under El Capitan 10.11

  It seems to work very well then stops halfway through a job and sometimes not even start a job?

  I've updated all the drivers etc, removed the printer and he added a few times, it works via cable? but no good wifi sold as active WIFI.

  This problem is driving me crazy, I have a daughter in college and she needs to print things every day?

  Open system preferences > printers and Scanners and select the characters tab then control or right on the printer Epson on the left then click on: reset the printing system

• I reformatted my computer and it starts great, but I'm having a problem connecting to the internet. Is there something to do to correct it?

  Internet is directly connected to the student of ethernet and plugged in right and it does not appear in the connections.

  Check Device Manager to make sure that the driver for your network card is installed.

  Click Start > run > type devmgmt.msc > click Ok. Scroll down and locate all of the items with a yellow! or! next to them. If one or the other of these symptoms appear after the brand and model of your computer.
  

• Unable to connect my laptop to the new wireless printer - error "installation failed" after entering my password/security key (WPA)

  I just bought an Epson printer. I went through the installation process on my laptop but I get the "Failed to install" error message after entering my password/security key (WPA). I am with BT and my home hub I have "Wireless Key", "PIN WPS wireless" and "Admin password" - which is it? I tried all three and not joy. Help!

  It is almost certainly looking for your "wireless key".

  The WPS Pin is only used if the printer supports "Wi - Fi Protected Setup" - which it probably isn't, and the "Admin" password is used to access your BT home hub to make configuration changes.

  In addition to identifying what wireless Epson printer you have, you can either

  • b changes to the configuration of the printer from a screen on the front or
  • (b) to connect to the printer by an Ethernet cable or
  • (c) to connect to the printer with a USB cable?

• After connecting a new router to Talk Talk, WIRELESS printer will not print.

  Original title: network programs network networking Internet website URL website troubleshooting Web page

  Just plugged a new router to Talk Talk, can I do something with my WI FI printer such that it will not now print?

  Hi Pamela,.

  1. what happens when you try to use the printer Wi - Fi?

  2. you receive messages or error codes?

  3. What is the brand and model of the printer?

  This problem may occur if all the printer settings or your router then reconfigure to communicate with the new router.

  You'll be in touch with Talk-Talk help or support from printer manufacturer to check the same.

  Router connection TalkTalk settings - help

  For more information, see the article:

  Install a printer

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.