Having a problem connecting to the internet with Workstation 6.5

Similar Questions

• Problems connecting to the internet with my wireless router

  I have a WRT54GS v7 wireless router that I use with a modem ADSL ZyXEL P-660R-D1. during installation, I was unable to establish a connection to the internet, once my router is properly connected to my desktop computer and my modem. All the correct lights on my modem and router are turned on. Please help, I tried to turn off the two as instructed by the installation wizard, but who failed to make the internet connection works and I continued the installation process after many attempts. At the end of the installation, he said that my router has been set up, but I don't have an internet connection. What should I do to fix this?

  The problem you are experiencing is caused by the fact that you Zyxel and your WRT54GS both try to use the same 192.168.1.x subnet.   Your WRT54GS will not work properly if you try to put the same subnet on the LAN ports and the port Internet (WAN).  Also to note that the installation wizard will not work in your situation, then stop using it.  You will need to manually configure your router.

  There are two ways to solve the problem:

  Option 1) Change the subnet in the WRT54GS.    To do this, follow these steps:

  (a) turn off your network

  (b) disconnect the WRT54GS of other devices.

  (c) connect a single computer via ethernet cable, a LAN on the WRT54GS port

  (d) turn on your computer and the WRT54GS

  (e) point your browser to 192.168.1.1 and connect to your WRT54GS

  (f) change "local IP address" 192.168.2.1, then click the 'Save Settings' button and wait (3 to 60 seconds) of the screen refresh.  You will be probably disconnected from the WRT54GS.  Don't worry about this.

  (g) take out your browser and turn off the WRT54GS and your computer.

  (h) then, using an ethernet cable, connect the Zyxel ethernet port to port Internet (WAN) of the WRT54GS.

  (i) power of your network.  It should work.

  You will now access your pages of configuration WRT54GS to 192.168.2.1

  Option 2) the other way to solve your problem is to change your Zyxel to 'bridge' mode  (You will need to consult your Xyxel user guide, or your ISP website, to find out how to do this).  This will convert the Zyxel a real modem, and then he won't get an IP address.  After that, you need to configure your WRT54GS to your PPPoE connection for you.

  I guess that your Zyxel is a PPPoE connection.  If we perform a PPPoA connection, then does not allow Option 2 because your WRT54GS is unable to make a PPPoA connection.

  Additional notes:

  You don't need to do both options.  Choose one or the other.

  For a more normal web use including browsing, email, downloads, etc., or another option should work fine.  If you are an online gamer, you will probably prefer option 2, because this will make it easier to set up many online games.

• I reformatted my computer and it starts great, but I'm having a problem connecting to the internet. Is there something to do to correct it?

  Internet is directly connected to the student of ethernet and plugged in right and it does not appear in the connections.

  Check Device Manager to make sure that the driver for your network card is installed.

  Click Start > run > type devmgmt.msc > click Ok. Scroll down and locate all of the items with a yellow! or! next to them. If one or the other of these symptoms appear after the brand and model of your computer.
  

• I have a problem connecting to the internet with remote access.

  Hi I have a laptop Dell Inspiron. I installed Vista and now I am unable to get on the internet. I use the dial upward at home. None of my ISP disc make me on the internet... It gives a message that there is a problem with the hardware. What can I do to fix this?  I had XP before and it worked fine.

  Hello

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

  If there is no vista drivers available, you're out of luck and that the machine was not built by Dell for vista

  If necessary, use another computer to download and save = copy to flash drive - transfer and then install them

• Unable to connect to the internet with Foxfire. Can do with Internet Exporer

  I've been using Foxfire. After an update I can no longer connect to the internet with Foxfire. IE can connect.

  Firefox is the name. Foxfire is a bio-luminescent fungus.
  
  http://en.Wikipedia.org/wiki/Foxfire _ (bioluminescence)

  See this support article - difficulty of problems connecting to websites after Firefox update

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Unable to connect to the internet with other programs (like Zune) but internet explore still connects.

  I can connect to the internet with internet explore very well. No problems.  But when I try to connect another program to the internet, like Zune or Wildtangent games the program says that I'm not online.  I know that I'm online because I check to make sure you Internet explore, and which still works.  I already tried to change the firewall settings to allow programs through, but that did not work either

  Hi Chloe,.

  1. What is the exact error message?
  2. Since when are you facing this problem?

  However, try the following steps.

  Step 1: Add zune except for windows firewall.

  1. click on start toreduce this includes this image, type firewall.cpl in the Search box and press ENTER.

  2. click allow a program through Windows Firewall. Collapse this includes this image
  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  3. click on add program.

  4. click on Browse.

  5 locate the Zune and then click Open.
  Note By default, the Zune is installed in the following location:
  C:\Program Files\Zune\

  6. click OK twice.

  Step 2: Windows live onecare

  1. Start Windows Live Onecare.
  2. Click change Onecare settings.
  3. Click the firewall tab.
  4. Click on Advanced settings.
  5. Scroll through the list of programs to determine if Zune appears in the list.

  ·         If Zune appears, make sure that the Zune is set to allow instead of block.

  ·         If Zune does not appear, follow these steps:

  1. click on Add.

  2. Locate the Zune and then click Open.

                  Note By default, the Zune is installed at the following location: C:\Program Files\Zune\

  3. click OK twice.

  http://support.Microsoft.com/kb/927980

  Try these steps and let us know the result.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have a problem connecting to the internet. A windows security message appears requesting a user name and password.

  network/security problem

  I have a problem connecting to the internet. A windows security message appears requesting a user name and password. I spoke with my internet provider and they say it's problems with windows. Administering the computer was an old laptop that isn't in use anymore so I can't change the admin settings. Is that what you can offer and do you need more information about me?

  How you connect to the internet, dsl / comcast / wireless.

  The installation disk of your ISP to the main computer, then put it to the top with a modem what ever, after that you can reload the disc of routers and probably have to reset the default password,

  Once you get the configuration of your Internet service provider again then your router again you can re - enter the wireless or wired computers to the new network,

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• Tecra M3 has ceased to connect to the internet with cable

  I have an old laptop Tecra of 3 year (out of warranty).
  Last week, he stopped to connect to the internet with a cable. I tried several cables and jacks. No idea what to do?

  LAN card is entered correctly in the Device Manager?
  LAN port has two leds, green and orange. Green LED is turned on when you connect the LAN cable?

• I have a problem connecting to the internet. When I click on the internet it goes straight to windows media player

  Hi I have a problem connecting to the internet. When I click on the internet it goes straight to windows media player.

  HI Maria,

  If you are using Vista, go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to EXE and click or double-click it to run the program to restore EXE file associations.  Once done, do the same for LNK entry.  This should restore your programs and get the Internet icon to go to the internet rather than WMP.  If you use Windows 7, go to http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html. If you are using XP, go to http://www.dougknox.com/xp/file_assoc.htm.

  If this does not work and it started recently, try a system restore to a restore point BEFORE the problem started.  If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html.  If the first attempt fails, try an earlier point or two because the problem may have started before you noticed.

  I hope this helps.

  Good luck!

• Problems connecting to the internet from my laptop

  My phone (Samsung A NP550P5C-S02AU running windows 7 Home premium) does not connect to the modem (which is a D-link DSL-2740 b - F1)

  For the past few weeks that I was able to fix this by resetting the modem/restart the laptop and I also did a full restore on the computer laptop but also completely reset the modem and updated the firmware. I also tried two different wireless, WPA and WPA2 security settings that solved the problem (although surprisingly, it worked for a few days during the passage of to WPA). For the last two days the laptop was not able to connect to the internet outside a few times where the connection lasted 2-5 minutes. We have several computers and portable devices in the House who seem to have no problem connecting to the internet, so I'm not sure of what could be the problem.

  Any advice would be appreciated

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Method 1
  I suggest you try the steps from the following link:

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-I-connect-to-the-Internet

  Method 2
  I suggest you to update the drivers for the network card and card wireless from following link:
  http://www.Samsung.com/au/support/model/NP550P5C-S02AU-downloads

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Wireless connectivity problems: Windows Vista displays connected to the internet with good signal, but cannot access the internet more than a few seconds.

  Hello

  Recently, I brought a Dell with Windows Vista and a Belkin Wireless adapter in my house somewhere else. The computer has never had problems connecting to wireless internet on the other networks, however since the move I was not able to access the internet. Sometimes the network shows only a local connection and not Internet and other times, the network has a strong signal, a network identified and even an internet connection, but when I open any browser, it is only able to load the Google homepage and I cannot navigate anywhere else. I turned off all firewalls and even uninstalled all 3rd party software protection. I checked all my browser settings and made sure they detect automatically the IP settings and proxy settings. In other words everything seems in good shape, but I still have no navigation capability. Any ideas?

  It turns out that I had to remove all the old Wireless USB software that had been used previously (there had been other versions of Belkin and Linksys). I then used the computer from my friend to download suitable driver on the Belkin site for the internet adapter USB I used and BAM.

• Dell Inspiron 15 is having problems connecting to the internet?

  Hello

  I had a problem with my Dell Inspiron 15, wireless connection to the internet for some time now. Almost daily, some time ago when I can't connect to the internet, no matter how many times I try to connect, and if I do connect, it remains only connected for a minute or two, and then I'm back to the tent to connect several times. I know it is not my router or my modem, because none of the other computers or devices in my House have the same problem. I'm the only one with these connectivity issues. I reset my router and modem regularly, thinking this may help, but it doesn't. I changed the channel on my router and which has in fact nothing, either.

  For any help or suggestion would be appreciated!

  Thank you!

  jkrawcke224,

  Start, Control Panel, device, network, Dell Wireless 1397 WLAN Mini Card Manager, advanced. Looking for antenna diversity. Change car for auxiliary voltage

  Rick

  Name of the operating system: Microsoft Windows 7 Home Premium
  OS version: 6.1.7601 Service Pack 1 Build 7601
  OS manufacturer: Microsoft Corporation
  Original installation date: 25/06/2010, 20:07:26
  Starting system: 29/12/2011, 09:27:28
  System manufacturer: Dell Inc..
  System model: Inspiron 1564
  Type of system: PC x 64
  Processor (s): 1 processor installed.
  [01]: Intel64 family 6 model 37 Stepping 2 GenuineInt
  El ~ 917 Mhz
  BIOS version: Dell Inc. A13, 29/03/2011
  Local system: en - us; English (United States)
  Input locale: en - us; English (United States)
  Time zone: (UTC-05:00) Eastern (U.S. & Canada)
  Network adapters: 3 interconnect installed.
  [01]: Dell Wireless 1397 WLAN Mini Card
  Name of the connection: wireless network connection
  DHCP enabled: Yes
  DHCP server: 192.168.0.1
  IP addresses
  [01]: 192.168.0.101
  [02]: fe80::28ed:4235:3 4 c: 2e5c
  [02]: Realtek PCIe FE Family Controller
  Name of the connection: connection to the Local network
  Status: Media disconnected
  [03]: Microsoft Virtual WiFi Miniport adapt
  Name of the connection: wireless network connection
  Status: Media disconnected

• Connectivity of the Internet with the browser problem

  * Original title: Intermittent IPv4 IPv6 vs connectivity issues

  On my home computer, I have intermittent problems with the connection to the internet using Chrome. It shows that I am connected to a network (router), but do not have access to the internet. After a few minutes I can connect again. This problem has happened several times in the hour, I used my computer this morning. I'm not sure if there is a problem with my ISP/equipment, or if it's a problem with my computer.

  For a time affected by this problem, I tried to ping Google. The ping was successful, but routed to an IPv6 address. I tried to ping to Google again, this time forcing IPv4 and the request timed out. If I run 'tracert www.google.com-4', it doesn't even to my router.

  I use a router/modem provided by the ISP and my wireless router. I had this problem while connecting through my router and connect directly to the modem. I'm under 64-bit Windows 7 Enterprise. I don't know what version of Chrome, I'm running, but I don't know that it is outdated, although since I can not ping Google through IPv4, I don't think it's the browser. Any help is appreciated.

  Hello

  The probable cause of this problem could be due to internet connection or the licensing of the ISP parameters.

  I would like to know have you tried using another browser like internet Explorer or Mozilla Firefox?

  Method 1:

  I suggest you to check if the problem re occurs even on Internet Explorer.

  Method 2:

  Reset the TCP/IP using the NetShell utility, please follow the link below that has the fixit utility runs.

  This article describes to reset TCP/IP automatically by running the fixit utility manually.

  http://support.Microsoft.com/kb/299357/en-us

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. Answer please if you need help.

  Thank you