Having a problem with access to several sites. PLEASE HELP QUICKLY!

Similar Questions

• Problems with access to Web sites in the laptop of my mother, both wireless and ethernet connections

  Original title: Internet issues

  My mother's laptop has suddenly stopped to access Web sites. I tried to explore, Firefox and Chrome using both wireless and ethernet... connections we both century link and I tried the two houses... my works laptop on both networks. All three browsers connect to the internet, but not all pages opens. I ran the store and he told me that I should look online for more help... which is not the case, but it cannot determine the problem. Any ideas?

  Hello

  Welcome to the Microsoft community.

  I understand that you have a problem with access to Web sites. We apologize for the inconvenience caused to you and appreciates your efforts to try to resolve the problem.

  I would like to know the details below to help you better

  1. Do you receive an error message/code when you access Web sites?
  2. Do you think that any symbol with exclamation on the icon of this internet access on the taskbar (right)?

  I ask you to try the steps in the Microsoft Help article below and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Also I ask you to reset TCP/IP and check if it helps.

  How to reset TCP/IP using the NetShell utility
  http://support.Microsoft.com/kb/299357/en-us

  Keep us updated on the issue to help you better.

• Problems with WRT160N and Xbox 360 - please help

  Hello

  I recently bought a WRT160N router and when I play games online (Halo 3 or Modern Warfare 2) it takes about 10 minutes to find a game then that in the Hall. I didn't put in the door or disconnected from my profile, there's just a lot of time. It says that my NAT type is open. I've isolated the problem is the router because if I plug in an ethernet cable from the 360 to the DSL modem I find games instantly. I examined the port forwarding and open ports on the 360 and specifically for modern warfare 2 and it was actually my NAT type go as strict, ironic. I have spent 5 hours trying to mess with this and can't seem to make it work right. If someone could please help me on the settings or have any other ideas that would be greatly appreciated.

  As your ISP is a provider DSL, most providers DSL has setup their modem in DHCP Mode, so your Modem acts like a router. So, right now, your Setup is NAT behind NAT. So if you try to open the Ports on your Linksys router it does not work as your Modem Hangs only ports.

  So the best way to work is to convert your Modem in Bridge Mode and it will solve all your problems.

• Problems with the photoshop pen pressure, please help!

  I have problems with the stylus pressure sensitivity. My drawing tablet works great and fits perfectly, but photoshop can't detect the pen pressure. The Tablet I have is a brand new turcom ts-6580.

  Yes, I tried their website and had no luck. I searched online to understand this and apparently this tablet has the same drivers as the tablet of the Oh, I guess that they were made by the same company. I sent an email to remember on this subject and they sent me a link to download the latest version of the driver.  Once I pulled the program and checked "TabletPC support." Photoshop has begun to recognize the pen pressure.

• Problem with the installation of photoshop - please help!

  Hello, as the employee of the wonderful adobe, instead of helping me solve my problem told me to search for the answer adobe help topics (I can NEVER find the answer, I need on any page of sites help topic, that's why I always prefer to just directly contact them) or try the forums (essentially giving access to his work to you guys) I'm here.

  I'm trying to donload my copy of photoshop elements 3 on my laptop. I downloaded it and works on my desktop and it's on my laptop before I needed to get a new hard drive. The problem is, whenever I try to open the program after installation, I get this message:

  "Could not complete your request because of missing or no personalization information valid"

  then the program closes.

  I have alread deleted and reinstalled the program several times, but no luck.

  Any ideas on what the issue is, and how I can fix this problem?

  I use Mac Os X, fyi

  PS I just downloaded on my sister's laptop, that's why I'm trying to work on mine even once, I thought that it would be finally...

  The only reference I found to this error are intended for Windows users, but it seems to point to an authorization number.  I recommend creating a new administrator account and repeat installation under this account.  It seems as if the installation program cannot write the serial number during installation information.  A new administrator account resets permissions so should not encounter the same problem as your current user account.

• I could not hear any sound from my speakers, only used the tool of the window all still no sound, so upgraded to sp2, now having display problem & still can't hear it please help?

  I have xp home edition sp1 happen something with my sound on pc tools in the window couldn't resovle the problem, so updated to sp2, now, I posted problem cannot reset resolution on screen and still no sound, anyone has a solution?

  Hi JeanBolling,

  ·         What tools did you use to solve the problem?

  ·         What happens when you try to change the resolution?

  Method 1: Check if you have followed this guide from Microsoft.

  No sound in Windows

  Method 2: Uninstall the sound card and reinstall to check the issue.

  a. click Start, click Control Paneland then double-click System.

  b. click on the hardware tab.

  c. expand sound, video and game controllers.

  d. right click on the sound card, and then click on Uninstall.

  e. restart the computer. Log on to the manufacturer's Web site and update the latest audio drivers.

  Method 3: For the display problem, you can consult this article.

  Resources for troubleshooting problems in Windows XP

• problem with the custom field. Please help!

  Hi, I'm basiceditfield using code below, to draw the border and background in 4.5 jde. I hv tried a lot of things to set his height.but his does not work for all value.even I put height 100, it does not display the bottom line of the field

  Basic BasicEditField = new BasicEditField("","",15,1) {}

  g.setColor (14315734);
  g.setColor (Color.PERU);
  g.fillRoundRect (0,0,30,30,0,0);
                
  g.setColor (Color.BLACK);
  g.setFont (Helper.getFont(6,"",false));
  g.drawText ("", 3, 3);
  g.setColor (Color.MAGENTA);
  g.drawRoundRect (20,30, 0, 0, 0, 0);

  Super.Paint (g);
  }
  };

  Mr.Peter,

  I tried already and surfing on the internet, my problem is something different and so I started a new thread, because I couldn't find the solution. Tried several codes that are on the forum, but with the same result, that's y I posted my code here.

• A problem with the selections of feathers - please help!

  I am currently using Photoshop CS4 Extended.  This problem can be demonstrated by the following workflow (the actual size, I used are not important):
  
  1. open a new file with a white 4 "x 4" @ 400 dpi (use the foreground/background default colors - black and white).
  2. make a new layer (Layer 1) and fill it with black.
  3. a second new layer (Layer 2) and fill it black also.
  4. Select a rectangle in the Center about 2 "x 2".
  5. make layer 1 of the active layer.
  6. choose Select-> modify-> feather 100 pixels.
  7. tap on DELETE.
  8 make the layer 2 of the active layer.
  9. choose Selection-> invert.
  10. press delete.
  11 change the property of the layer 2 layer to multiply.
  
  I expect that the two layers (Layer 2 and layer 1) should be exact with the compliments of the other such that none of the white of the background layer should be visible through the black.  But instead, there is a halo of invisibility in the pen area (see this by disabling the background layer).  Step 11 seems to have no effect.
  
  None of you see this problem too.  What can I do to get an opacity of 100% in both layers of feathers?  Does anyone have an explanation for what is happening and why the unexpected behavior.

  Another thing that is strange is that if you just do a sselection feathers to say a black box, fill it with white and then fill the same selection with black, you get a similar unexpected result.

  You can contact me directly at [email protected] .

  Dave White

  http://www.atileimage.com

  Maybe I didn't address it directly, but I did it on a conceptual level: all calculations are multiplicative.

  If a pixel is partially selected, it is multiplicative combined with fill color (X % x 100 + original pixel color - X % x fill color).  To do this, twice, and some vestiges of the fill color of the first filling is part of the original pixel color twice.

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  I still want the effect somehow and wonder how.

  Can you describe clearly what it is you are trying to accomplish?

  -Christmas

• PROBLEM WITH UPGRADE TO WINDOWS 7, PLEASE HELP

  Hi, I am in Australia and have a 64-bit HP DV7.  I did the upgrade request form, but when I put the model number in, it automatically selects the family window 32-bit premium - the problem is, it is grayed out and won't let me change to 64 - bit... I can't place the order because it's bad for my operating system. Any help/ideas would be greatly appreciated.  Thank you very much

  You are more than welcome!

• Eclipse problems with the plugin SDK installation - please help

  You have a new PC.  Yes for me.  Installed the new Eclipse + BB JDK of this site.  There is no option for BlackBerry projects when I run Eclipse.

  When I import my old PC projects, there are tons of red x in them.

  If I go to software updates, it shows 1.1 plugin and v5 SDK * is * installed.

  Something simple, I'm sure.

  I have not installed Java SDK 6 real.  Although he does not tell you which at the time.  He moved very well, it just doesn't work.

  I have installed the Java SDK6 and reinstalled and it worked.  Thank you, Mark.

• Strange problem with a plsql code example, please help

  Hi all
  
  I have the following code, the question is the exit condition IE "when the output meter = end_of_strng;', its loop to achieve I guess because my toad is get is crushed... but if I do a test on paper code seems perfect, all I'm trying to do is to pass a delimited string ex" : | Rahul | Kris | me | IBC | as the procedure entry and print names individually, please help.
  
  Concerning
  Rahul
  
  The code is as follows:
  
  CREATE or REPLACE procedure ANALYTIC_LAT.split_del_r_to_c (strng in varchar2)
  as
  
  extract_char varchar2 (1);
  int counter: = 1;
  int end_of_strng;
  delimiter int: = 0;
  part_of_strng varchar2 (1000);
  int in_counter: = 2;
  
  Begin
  
  end_of_strng: = length (strng) + 1;
  
  loop
  extract_char: = substr(strng,counter,1);
  
  If extract_char = ' |'
  then
  -dbms_output.put_line ('abc');
  extract_char: = ' # ';
  -delimiter: separator = + 1;
  If (extract_char <>' |')
  Then, wrap
  -dbms_output.put_line ('abc1');
  extract_char: = substr(strng,in_counter,1);
  When the extract_char output = ' |';
  part_of_strng: = part_of_strng | extract_char;
  in_counter: = in_counter + 1;
  
  
  end loop;
  counter: = in_counter;
  in_counter: = in_counter + 1;
  dbms_output.put_line(part_of_strng||) e ');
  -dbms_output.put_line ('abc2');
  part_of_strng: = NULL;
  end if;
  
  end if;
  
  -counter: = counter + 1;
  When the meter output = end_of_strng;
  end loop;
  end;
  /
  

• problem with the f: param element, Please HELP

  Hello
  
  I have a screen that opens the file stored in the file system, I used frank.nimphius steps in his article:
  http://thepeninsulasedge.com/frank_nimphius/2007/08/18/ADF-faces-direct-file-download-through-managed-bean/
  
  but when I printed in the paper that it shows null, the value of the parameter
  
  ValueBinding documentParameter = fctx.getApplication ().createValueBinding("#{param.document}");
  DocumentName = documentParameter.getValue (fctx) object;
  System.out.println ((String) DocumentName); -> It's null
  
  
  I use Jdeveloper 10 g

  Try this:

  public class MyBB {
  
      private String myParam1;
      private String value = "Value";
  
      public MyBB() {
      }
  
      public String openDocument( ) {
      System.out.println("in open document method call.....");
      System.out.println(myParam1);
      }
  
      public void setMyParam1(String myParam1) {
          this.myParam1 = myParam1;
      }
  
      public String getMyParam1() {
          return myParam1;
      }
  
      public void setValue(String value) {
          this.value = value;
      }
  
      public String getValue() {
          return value;
      }
  
  }
  

• Problem with access policies (create several resources)

  I'm having a problem with access policies:
  
  The first policy must create a resource.
  And the following policies should create childs on the resource.
  
  The problem here is that when the policies will add the childs, the resource is not configured yet.
  And then each will create a resource but I want just a single resource of the childs.
  
  
  When the resource is already deployed, policies to update this resource correctly.
  
  How can I fix?
  
  TKS

  Ricardo,

  I had a similar problem. In a post processing Manager, I managed the membership of the user to specific through the removeMemberUser roles and the addMemberUser of the tcGroupOperationsIntf class.
  The last parameter of this method is a Boolean value that, if true, would automatically trigger access by programming strategies in post processing.
  The problem is that there also is an OOTB handler for triggering access rules, so I was basically triggering twice access policies and duplicate resources appear.

  I hope this helps.

  See you soon

• Having a problem with the Muse crashing when opening a Web site I designed in Muse.

  Having a problem with the Muse crashing when opening a Web site I designed in Muse. You need to be able to access this site in order to update for my clients.

  [LASP/updateCaches] TypeError: Error #1009: cannot access a property or method of a null object reference.

  All adventures Rafting | Wenatchee Whitewater Rafting trips - two hours East of Seattle

  Could you please send us the .muse file to [email protected] as well as a link to this topic? If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc.. Thank you.

• I had problems with access to most of the Web sites and I noticed that HTTPS is no longer, how do I make permanent HTTPS so I can access any Web site?

  I had problems with access to most of the Web sites and noticed that HTTPS no longer appears whenever I try to access a Web site. I can easily connect to my gmail and facebook account, but the problem is that when I click on a link on FB and gmail, I get the annoying message "refused to connect.

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site. The date and time on my laptop are both correct. I am currently using OS x 10.9.5.Please!

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site.

  My guess is that you have a damaged or invalid certificate entry OS X KeyChain, but to directly answer this question, I would say that consider you something like HTTPS Everywhere. Note, it is not available for Safari. It is available directly through the Google Chrome browser extensions.