Having problems connecting to a wireless network

Similar Questions

• problem connecting to the wireless network, but it worked yesterday.

  Yesterday, I was able to connect to my home wireless network, but not today. I also have a laptop and it connects to my wireless network, there must be something with the RT of Surface.

  Home Wireless works, why can't connect?

  Your post is off-topic in the forum Feedback, I moved it on the forum of "Web and Networking" Windows RT.

• Problems connecting to the wireless network windows media

  After having installed AT & T u verse, the installer said I have to use the code of encryption key for the modem/router to connect to wireless network windows media, so I can watch TV.  Windows Media repeat myself that it's the wrong key code. I checked the number again once and he's right. Any help?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-media-on-a-network-using-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/watch-TV-in-Windows-Media-Center

  It will be useful.

• problems connecting to the wireless network - the network (no internet access) proxy setting

  Former title: yellow triangle wireless

  My computer can connect to the wireless router but cannot connect to the internet. I try to connect with the ethernet with cable modem connection & it still does not work. The other laptop works fine but my does not.

  1. I have uninstalled & installed the network card.

  2 restart the apater modem & network cable

  3. I get 'Windows could not detect a network proxy setting.

  4. when I "Network & Sharing Center" and under "show your network activity" I get "identification."

  5. "identiyfing netgear" below said 'no Internet' when you are connected to netgear

  Windows IP configuration

  The host... name: Jeffrey -.
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 1C-65-9D-BF-E2-BF
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8188CE WLAN 802.11n PCI-E NIC
  Physical address.... : 1C-65-9D-BF-E2-BF
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::cc8f:f2cd:dd7c:ccd1% 17 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.204.209 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: disabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek PCIe FE Family Controller
  Physical address.... : 1C-75-08-73-8F-F1
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {342574F9-0D0B-4337-B59D-E7373E959066}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {25F2C90C-9E95-491A-BDFC-4F4CDA2FE33D}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Hi istraight1,
  a few steps, I recommend you to see exactly what this question:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  and
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-could-not-automatically-detect-this/d243dea1-d1c8-4C4A-ba96-2b49bc9bab1a?TM=1338167520088

  and finally:
  http://social.technet.Microsoft.com/forums/en-us/itprovistaprinting/thread/548ca07e-F04E-4973-8719-8c09959f1ca6hope this helps.
  B Eddie

• HP Pavilion 15 laptop: Solved: unable to connect to my wireless network

  I have problems connecting to my wireless network. In available connections, my network is there with an x next to it. I can click on it and put my security key in, but it says unable to connect to the network. I've updated ready network cards. Any help would be greatly appreciated.

  Bobby

  Thank you for all your help. I'm back on now. I started having trouble a few weeks ago. My wifi connection would pass, and I have to disable and then re activate my network card back. This has been relatively shortly after my upgrade from Windows 10 but not immediately after. Then the other day which didn't work and I could not connect at all. I read somewhere to try to uninstall the network adapter and then restarting. It did not work. I also read to find updates for the network card and install those which, as mentioned by ichi730 as well. This no longer works. Then, I realized that I had not tried to restart the router after reading the post of WyreNut. It worked, thank you! I feel that it is a combination of the two pieces of advice that have worked so.

  Thank you all for your comments, it's much appreciated.

  Bobby

• Photosmart C4780 cannot connect to the wireless network

  My Photosmart C4780 worked just well, wireless, and now I can't print unless I connect it to my laptop or desktop via the usb cord.  I'm under that Mac OSX 10.9 with the Mavricks downloaded on both computers.  I was able to print from my Mac Mini, iPhone, iPad and MacBook Air all without problem, but now my WiFi network Test report said that I do not see "Network name (SSID found)".  The Configuration Page of my status Netowrk said HP network is Offline and my Active connection Type is None, but I can see my network under number of 802.11 networks discovered.  I think I just need to connect or reconnect the printer to the network but I can't find how to do this anywhere on the help site.  Can someone tell me how to connect my printer to my network now?  When I first installed it on the network, I had no 10.9 OSX with Mavricks so the installation CD works perfectly, but it does not work either.  One last thing, when I try to use the screen on the printer and go through the WIFI Protected Setup the two push button and PIN fails.  HELP PLEASE...

  Hi hisfunbox,

  I'm sorry to hear that you are having problems connecting to your wireless printer.

  I have included a document with steps on how to change the printer to a USB connection to a wireless connection. It has a paragraph for Mac OS X Lion mountain/OS X v10.9 Mavericks v10.8. The second option in this section is how to move from the existing USB connection.

  Installation of the software of the printer for a wireless network connection

  http://support.HP.com/us-en/document/c02273853

• Cannot connect D110 for wireless network

  Hello

  I just bought the D110 all in one, but am having trouble connecting to my wireless network.

  Here is my network information:

  DSL with Verizon

  My router is a netgear rangemax wnr3500

  I use for my WPA - PSK [TKIP] safety + WPA2-PSK [AES].

  He can see my wireless network, but after that I put in the access code, it does not connect.  I also tried using the WPS method with no luck.  Help!

  I feel so stupid for this but I've checked the settings on my router again last night and the MAC address filtering enabled.  I must have forgotten that I turned it back at some point.  My fault.  Thanks for responding in any case.

• at & t u-verse, & having problems connecting my Officejet 4500 to my current wireless network

  Hello

  I just got an Officejet 4500, and I am unable to connect it to my current wireless network.  I'm AT & T U-Verse so I use 2Wire equipment.  I have a Mac Book Pro, and I'm on Mac OS X operating system 10.5.8.  When I try to connect, I get an error message saying something like "Failed to connect."

  In the past, I had problems connecting my Airport Express to 2Wire.  In order to make it work, I connected the router 2Wire and changed the WPA - PSK (TKIP) security settings and WPA2 - PSK (AES) to just WPA2 - PSK (AES).  My Airport Express was able to connect without any problems.

  Please help me to connect my Officejet 4500 to my 2Wire router.  I note also that I'm not really tech savvy so I need instructions are written in simple terms.

  Thank you in advance for your help!

  Marc-Antoine

  Tanisha Hey! Try as part of this support document: AT & T 2Wire routers: "Login failed" or "Can't find printer" Message, or cannot connect to a wireless network

  I hope this will get back you on track!

  -Sean

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  I just installed a Belkin modem-router - which went well. Can I connect WiFi gadgets etc. I can also connect to the internet via a network cable to my pc. I also installed a belkin usb wireless adapter and in Device Manager, says it is enabled and works.

  My problem is, I have no way of choice get a WiFi PC to display in the list (from the notification area) and cannot get the pc to give me options to create a wi - fi connection. The more I get to try to do that is "unexpected error"!

  If someone could help on this - I would be very grateful

  Good news - update of my ongoing saga with this Belkin modem/router.

  Got the pc to see wi - fi now. It turned out to be the Zone Alarm! As the router has a firewall, I uninstalled Zone Alarm completely. Also, I went into the properties of belkin usb and checked it was the most recent drivers, it does not so I installed them.

  So far so good

  Thanks for the help

  TREV Smith

• After a clean install of Windows 7, I can't connect to the wireless network and more problems...

  I recently did a clean install of genuine copy of Windows 7 Home Premium to clear unwanted programs all on my computer. Because the product key are disabled unexpectedly.

  The installation works fine, but after the installation. I can't connect to a wireless network, because there is no network adapter installed on the computer.

  Also, I can't set my screen resolution of 1366 x 768. Before any new install, the screen resolution sets to 1366 x 768 as native and recommended screen resolution. Now, I'm stuck at the screen resolution 1024 x 768. I need to change the graphics card so my laptop screen can support 1366 x 768? If necessary, please give me instructions on how to do this.

  Thank you.

  Acer Aspire one C5Cbb-722

  Go here, select your model, then download and install the network and video drivers.

  http://www.Acer.ca/AC/en/CA/content/drivers

• Laptop started having problems connecting to internet connections Wi - Fi

  in recent weeks my laptop new (6 months) started having problems connecting to wireless devices after spending hours ranging from hollow forums, check the settings in device etc, computer managers them laptop turns off, restarts said there was a problem that caused the laptop to the stop and then when it restarts it connects to the wireless device fine. If I stop back on the laptop, the problem when I turn it on.

  Not only it will pick up my wireless network, it says no wireless networks found despite her grateful normally about 15 other wireless connections, that my neighbors.

  Does anyone have a solution in the long term to this problem. I am a student and spent more than 3 hours trying to fix today and I don't have the time to deal with this all day.

  Thanks in advance

  > in the last few weeks my laptop new (6 months) started having problems connecting to wireless devices
  Have you changed some settings or perhaps updated driver WLAN? I mean, I can't imagine that problems start without reason.
  It is not easy to say what may be the problem. Perhaps, you must reinstall the recovery image and test the feature with the factory settings.

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• Palm TX cannot connect to WLC4404 wireless network

  I work for a small junior College and I'm having a bit of trouble getting a Palm TX handheld unit to connect to our wireless network. I hope someone can help me solve this problem.

  Six months ago, I created a WLAN (other than broadcasting, WPA / PSK and TKIP) for three digital assistants; everything worked very well. Two weeks ago, I upgraded the software on our controller wireless unable to connect 4.2.112 to the 5.2.193.0 version and now the PDA version. Maybe it's a coincidence... I know not dion. Someone suggested the possibility, and it seems appropriate.

  Documentation for handheld computers say they can use WEP or WPA / PSK.

  I tried to connect the PDA with 1) no security/authentication at all, 2) WEP and 3) WPA Personal. The unit I tested will connect to an airport of Apple and an ad hoc network on my laptop. I'm going home tonight and test it with my wireless Netgear N series router.

  I read a little on a Palm TX Enterprise Security Update. The Palm device does not belong to the school that I work so I can't launch the update to this topic

  This appears in the log after I try to connect:

  * Jan 21 13:54:05.250: APF-1-CONFLICT_IN_ASS_REQ %: conflicting apf_80211.c:3664 rates supported in the application of the Association from00:0 b: 6 c: 41:3f:5

  Any ideas / suggestions?

  Thank you!

  Lisa Coody

  Weatherford College

  Weatherford, TX

  Let experiement for awhile. Go a head and change data rates... 1 MEG Mandtory. Do ALL other supported data rates.

  To debug a client. CLI in the WLC who has the AP to which your wireless client is attached. The debugging of type customer. Then turn on your wireless client and enter what he brings in the WLC.

  Your comments: * 21 Jan 13:54:05.250: APF-1-CONFLICT_IN_ASS_REQ %: conflicting apf_80211.c:3664 rates supported in the application of the Association from00:0 b: 6 c: 41:3f:5

  Contradictory rates supported is the piece of intesrting. When you SAY make a MANDATORY RATE. A client MUST support this rate and if not she probably won't connect. Leash so it gives a spin...

• Unable to connect to other wireless networks

  RE: Unable to connect to other wireless networks

  • My computer is a HP Pavilion dv7 1232nr Entertainment Center
  • My OS is Windows Vista 64 bit
  • I have installed many things over the past year, but know that at some point, I was able to get on free Wi - Fi in hotels

  I am able to connect to my network, but when I try to connect to others, I'm unable to do. I have their password and my computer SHOWS I have a connection, but actually I'm not. When I try to connect to the Internet, the server is not found. I called the support/supplier for the last network owner and he told me that even if I "thought" I was online, I really wasn't. He said that it is probably a router configuration for that person that does not correspond to my computer. As I was just visiting, of course I didn't mess with their router. This happened to me twice, with once the provider is the same as mine, but the only way I could get connected with a hard link.

  So far, the only thing I did is to see if I could connect to free wireless (municipal library) and was unsuccessful. I think the problem is with my settings, but am not sure. I have to be careful to change anything because I can't afford to lose my connection at home because my job depends on it.

  Any suggestions?

  Thanks for any advice you might be able to share.

  Hi, Pat:

  I am very confident that if you download and install the driver from the link below, your problem will be solved.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-99392-1 & mode = 3

  Paul