Problems connecting to the wireless network windows media

Similar Questions

• problems connecting to the wireless network - the network (no internet access) proxy setting

  Former title: yellow triangle wireless

  My computer can connect to the wireless router but cannot connect to the internet. I try to connect with the ethernet with cable modem connection & it still does not work. The other laptop works fine but my does not.

  1. I have uninstalled & installed the network card.

  2 restart the apater modem & network cable

  3. I get 'Windows could not detect a network proxy setting.

  4. when I "Network & Sharing Center" and under "show your network activity" I get "identification."

  5. "identiyfing netgear" below said 'no Internet' when you are connected to netgear

  Windows IP configuration

  The host... name: Jeffrey -.
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 1C-65-9D-BF-E2-BF
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8188CE WLAN 802.11n PCI-E NIC
  Physical address.... : 1C-65-9D-BF-E2-BF
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::cc8f:f2cd:dd7c:ccd1% 17 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.204.209 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: disabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek PCIe FE Family Controller
  Physical address.... : 1C-75-08-73-8F-F1
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {342574F9-0D0B-4337-B59D-E7373E959066}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {25F2C90C-9E95-491A-BDFC-4F4CDA2FE33D}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Hi istraight1,
  a few steps, I recommend you to see exactly what this question:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  and
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-could-not-automatically-detect-this/d243dea1-d1c8-4C4A-ba96-2b49bc9bab1a?TM=1338167520088

  and finally:
  http://social.technet.Microsoft.com/forums/en-us/itprovistaprinting/thread/548ca07e-F04E-4973-8719-8c09959f1ca6hope this helps.
  B Eddie

• problem connecting to the wireless network, but it worked yesterday.

  Yesterday, I was able to connect to my home wireless network, but not today. I also have a laptop and it connects to my wireless network, there must be something with the RT of Surface.

  Home Wireless works, why can't connect?

  Your post is off-topic in the forum Feedback, I moved it on the forum of "Web and Networking" Windows RT.

• Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

  Original title: internet connection problem

  Hey,.

  I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

  1. Windows cannot communicate with the device or the reaource (primary DNS server)

  2. the connection between the Internet and your access point, router or cable modem is broken

  3 problem with access point or wireless adapter

  I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

  Hello Hildegard Lydia,

  You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

  What is the brand and model of your computer?

  Please follow the steps mentioned below:

  Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
  I suggest you try to reset the TCP/IP stack.
  http://support.Microsoft.com/kb/299357

  Method 2:

  I suggest that you refer to the following link:

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

  Method 3:

  See the steps in the following link and check:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please an update on the status of the issue to help you further.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  I just installed a Belkin modem-router - which went well. Can I connect WiFi gadgets etc. I can also connect to the internet via a network cable to my pc. I also installed a belkin usb wireless adapter and in Device Manager, says it is enabled and works.

  My problem is, I have no way of choice get a WiFi PC to display in the list (from the notification area) and cannot get the pc to give me options to create a wi - fi connection. The more I get to try to do that is "unexpected error"!

  If someone could help on this - I would be very grateful

  Good news - update of my ongoing saga with this Belkin modem/router.

  Got the pc to see wi - fi now. It turned out to be the Zone Alarm! As the router has a firewall, I uninstalled Zone Alarm completely. Also, I went into the properties of belkin usb and checked it was the most recent drivers, it does not so I installed them.

  So far so good

  Thanks for the help

  TREV Smith

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• Windows 7 taking a long time to connect to the wireless network

  When I try to connect to the wireless network, it takes about a minute or two.  I didn't have this problem until I updated my card wireless about a week ago.

  Thank you very much.  I think I solved the problem.  I didn't have this problem until I updated my card with the latest wireless.  But I uninstalled the new and re-installed version, and that seemed to solve the problem.

• HP envy laptop laptop 15-ah150na: loses the connection to the wireless network device I had not only portable for 2 days

  Loses the connection to the wireless network sometimes directly after that the computer is turned on at other times after 5 min and sometimes after an hour.  No other device I have loses the connection to the wireless network.  Help, please.

  Hello @fairgame,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the WiFi and wanted to help you!

  First of all, try to review the next steps, offered by community member @Great-Christine-Tree:

  First of all, we have a step by step guide to guide you through the process of diagnosis here:

  HP PC - troubleshooting Internet and wireless network

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.

  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Wireless network adapter cannot connect to the wireless network

  When I start my PC HP TouchSmart it does not recognize my wireless network.  It says wireless network adapter cannot connect to the wireless network and the details said network adapter "Local network connection * 16 ' does not work properly. The strange thing is that if I leave my computer for a few minutes, then restart it twice, it recognizes the network and starts working. Frustrating is that I have to do this everytime I turn on my computer.  It takes at least 10 minutes of starting and restarting my computer before it will recognize my wireless network.   Any help?

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• PC cannot connect to the wireless network

  Windows Vista and office computer HP.  The use of the Airport Extreme.

  All other computers in the House can connect to the wireless network.

  The Vista machine declined the connection Wireless intermittently for the past two weeks.  Tonight, he lost it completely.  When I click on "connect to network" in the network control panel - I see the wireless network.  But when I click on connect, I get a message that Windows cannot connect to this network.

  I changed the password on the Airport Extreme and rebooted, it.  Wireless usb on Windows machine the device works correctly, by checking through the properties box.

  For example, Vista machine is recognizing the wireless network, but does not connect. Why not?

  I'm ready to throw the computer out the window!

  Hello

  Check the PoodlesAway solution to the same issue here:

  http://social.answers.Microsoft.com/forums/fi-fi/vistanetworking/thread/d4fa044e-8C41-4D8D-a4b1-82ee9ff556ac

  ======================================

  Apple Airport may be your main problem - did you check its firmware?

  Read these
  http://osxdaily.com/2009/09/01/how-i-fixed-my-dropping-wireless-airport-connection-problem-in-Snow-Leopard/

  http://reviews.CNET.com/8301-13727_7-10331876-263.html

  ======================================

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Irregular problem connecting to the wired network

  My Windows 7 PC has an irregular problem, connect to the local network of cable through a provided network of the netgear modem/router.

  The connection timeout is the question and sometimes takes a while four two minutes or more.

  A reboot of the pc never seems to resolve but (quite often, in fact usually) will be a restart of the modem.

  The modem is always on (as the announced network connection is supposed to be).

  The network provider has replaced the modem, and the problem persists. This leads me to believe that there is a start up or similar problem with the pc.

  I ran the troubleshooter in windows... no chance/results. Is there a "fixit" tool I could try or something similar?

  Happy to clarify, to provide more information and appreciate any input.

  concerning

  Lethal42

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to refer to the link below and check if this is useful:

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1

  Hope this information helps.

  Sincerely,

  Ankit Rajput

• How can I disable 'O2 connection manager' to automatically connect to the wireless network?

  Original title: I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection

  I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection to the network.

  Hi John,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  If you do not O2 connection manager, you can disable it to connect to the Internet or you can uninstall the program and check the issue.

  You can follow the steps in the link below.

  Uninstall or change a program:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I would say O2 you back for more information in the links below:

  http://www.O2.co.UK/business/support

  http://community.o2online.IE/

  I hope that the information above helps you.

• Impossible to connect to the wireless network when the wireless Internet is filled to connect to the Local network

  I tried to fill the connection between my laptop Wi - Fi and an ethernet cable LAN via the connection to the Local network for my xbox 360. However, when the connections passed the wireless connection would show that it is disconnected and would not reconnect. When I tried to repeat the process sometimes the same thing happens sometimes it says that it is still connected.

  However, be that as it may, both times I could not load any page of the website from my laptop and xbox connect any.
  How can I create a network bridge and get the wireless internet to connect please?

  Any help to fix this would be appreciated,
  P

  This Microsoft Knowledge Base article might help: bridge may not work with a Non-Promiscuous Mode network card .

  If not, I recommend to delete the network bridge and enable sharing of Internet connection on the wireless network connection. Boulder computer Maven
  Most Microsoft Valuable Professional

• B110A connects to the wireless network but no PC connection

  Hi Forum,

  I just bought a new HP Photosmart B110A printer range. I got set up with my Belkin wireless router. It is successfully connected. I could set up printing webservice as well. The printer is offline and I could also print a document by sending an email to the email address for the printer configuration. This means that the printer is connected to the wireless network and the internet.

  However, I can not connect to this printer from my PC connected to the same wireless netwrok. When I open the HP Solution Center, it displays the message "disconnected wireless.

  When I connect the printer via USB cable, I am able to connect to the PC and impressions as well fire.

  Can anyone help please?

  Kind regards

  Amol

  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?