Having problems connecting WGA600N with WRT610N router
When I try to use the installation disk I get the following message "the Setup utility has been impossible to find games on your network adapter. Please make sure that your game card is turned and all cables are connected properly. I tried to reset the card, but not had any luck. Has anyone experienced this and have a solution?
Never mind.
Thought about it when I walked into the implementation of the adapter.
Tags: Linksys Adapters
Similar Questions
-
Laptop started having problems connecting to internet connections Wi - Fi
in recent weeks my laptop new (6 months) started having problems connecting to wireless devices after spending hours ranging from hollow forums, check the settings in device etc, computer managers them laptop turns off, restarts said there was a problem that caused the laptop to the stop and then when it restarts it connects to the wireless device fine. If I stop back on the laptop, the problem when I turn it on.
Not only it will pick up my wireless network, it says no wireless networks found despite her grateful normally about 15 other wireless connections, that my neighbors.
Does anyone have a solution in the long term to this problem. I am a student and spent more than 3 hours trying to fix today and I don't have the time to deal with this all day.
Thanks in advance
> in the last few weeks my laptop new (6 months) started having problems connecting to wireless devices
Have you changed some settings or perhaps updated driver WLAN? I mean, I can't imagine that problems start without reason.
It is not easy to say what may be the problem. Perhaps, you must reinstall the recovery image and test the feature with the factory settings. -
Problem connecting wireless with my Tecra A8
Hello
I have problem connecting WiFi with my laptop Tecra A8. When I opened my laptop, it does not connect to the wireless network.
I tried several ways to solve this problem.
I updated for active connections, then I click on the Connect button after you select my wireless LAN, but it doesn't connect.
Or I restart my computer, but it doesn't connect.
However, it connects to the network wireless in anytime after about 15 minutes.Also when I tried to connect to the network wireless at home, but I couldn't t connect. I removed the password for the connection. Then I connected without any problem.
I wonder that there is no problem with installation? Or my wireless card doesn't work?
Can someone help me?Thank you
> Also when I tried to connect to a home wireless network, but I couldn't t connect. I removed the password for the connection. Then I connected without any problem.
According to the statement, all looks like that you try to use a password for encryption wrong!
-
Did someone having problems connecting to the functionality of adobe currently shipping?
Did someone having problems connecting to the functionality of adobe currently shipping?
Finally got the link: https://cloud.acrobat.com/send
-
I have a problem connecting to a Cisco E100 router to my computer. My count (office) does not have a wireless. I have DSL from. Cisco tells me to plug a router using Ethernet cable to connect. I don't have an Ethernet connection on my computer. At present I have USB connect the computer to the Westell modem. Can anyone help? I hope this is enough information. Basically what I'm hoping to do is to install the WiFi so I can use a tablet now and maybe a laptop this last on.
Thank you
On the routers only house you can use USB connections are those provided by some ISPs. An Ethernet connection between the router and the computer is far more preferred.
Your router a Cisco E1000 or is it really E100 (I thought that Cisco makes a model with this designation not)?
It is quite surprising that you don't have an Ethernet connection that is built into your computer. What is the complete model number (or, preferably, the Number of Service Dell)?
Open the Device Manager (start > run > devmgmt.msc > OK). Expand the "Network card" category by clicking on the + next to him. What devices are listed in this category.
If you don't really have an Ethernet or an adapter wireless built into your computer, you can add one, using a PCI internal (if you have a desktop/Tower computer) or external (PC card for laptops) or USB to laptops or desktop/towers.
Also, the normal configuration is to connect your DSL modem to the router and then the router to the computer. If your Westell modem has an Ethernet connection, you must use your new router in a non-standard configuration. Even if the Westell modem has an Ethernet port, you may need to do some reconfiguration for her as well. What is the complete model of the Westell modem number?
-
having problems connecting to some websites with spa3102
Hello
I have problems connecting to some websites with spa 3102.
The error message I get is as follows.
The connection was reset
The connection to the server was reset while the page is loading.
* The site may be temporarily unavailable or too busy. Try again in a few
moments.* If you are unable to load any pages, check your computer's network
connection.* If your computer or network is protected by a firewall or proxy, make sure that
that Firefox is permitted to access the Web.When I connect to my ISP modem directrly, so I'm able to connect to these Web sites.
Any ideas?
I already had the latest firmware (software Version: 5.1.10 (GW))
But I think the problem is now resolved. Sites that I couldn't visit were my suppliers Web hosting and my own domain. Previously, I had activated attacking and that my hoster somehow registeren my mac address.
Here are the settings that I had to change the spa3102.
MAC Clone settings
The Service Enable MAC Clone: Yes cloned MAC address: xxxxxxxxxxxxthx for your help.
-
Problem connecting HP3055a with HP Compaq PC Tower
I recently bought him scan printer above. Initially, using my Dell D510 computer laptop (Windows 7), installed the software, connected to my Netgear router and printed successfully.
I have an old Tower of HP compaq (Windows 7) in my friends room and have tried in vain to connect to the printer even without success (after installation of the software). The only difference I see is that the PC has not built in wireless and I use a Netgear WG111T Adapter v2 connected USB to talk to my router. The PC connects fine to the router via this.
During the implementation, once I typed the IP address and try to connect, the implementation of message - "cannot find printer ' appears with the usual basic suggestions to try."
After completing all 7 pages of suggestions, I am still no wiser as to why my PC HP Compaq will not see the printer but the Dell laptop will be no problem.
During the software install the last option to toolbar HP could not install correctly on both the laptop and PC, but the message said that this make any difference to the operation.
The printer prints fine when hard cable for HP compaq PC.
Any suggestions please?
Hi mox53,
I understand your concerns, but you indicated that the printer is connected and working on another laptop computer that tells the printer works. The problem you are having is that another computer is unable to communicate with the printer. Before you try to use a wireless adapter, I would you try the following steps below to help isolate a problem with the operating system, resulting in a part of the problem.
Windows 7 and Windows Vista allows you to have multiple users share the same computer under their own individual accounts. This allows each user to have their own location on the computer where they can store their personal documents, photos, videos, saved games and other personal data. It also allows the owner of the computer assign some accounts the ability to perform administrative tasks such as installing software, while limiting the capabilities of the other user.
This tutorial will guide you in creating a new account in Windows 7 and Windows Vista.
- Click the Start button. It's the small round button () in the lower left corner of your screen that has a Windows flag on it.
- Click on the Control Panel menu option.
- When Control Panel opens, you will see a screen similar to Figure 1 below.
Figure 1. Windows 7 Control Panel
-
HP 2000: Problem connecting Wifi with HP 2000
I have a laptop HP 2000 used recently. I was able to connect to my WiFi at home, but drop it and saying 'Limited connection' or 'no. Internet Connection. I have the latest drivers for my network cards. Could it be caused by a faulty Wifi card? Could I get a replacement for the wifi card?
Hello @cost63,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.
I read your post about the WiFi problem and wanted to help you! I understand that you can replace the WLAN Module.
For starters, can you provide me with the product number of the laptop? Here is a link that you can use that will help you find your model and product number:
HP - products customer supportIt is possible that the WLAN Module may be faulty. If this is the case, according to the model of your laptop, the WLAN Module should be replaceable. But first, we'll see if the problem is software partner. Try to review these steps, proposed by members of the community
First of all, we have a step by step guide to guide you through the process of diagnosis here:
Troubleshooting your wireless network and Internet accessA second option is to try the following steps:
Powercycle the network:
1. turn off your laptop.
2. unplug the power to your router.
3. disconnect the power to your modem.
4. wait at least 45 seconds.
5 reconnect the modem and wait for it to come back online.
6 plug in the router and wait for it to come back online.
7. turn on your laptop and test your connection.Turn off the power to the adapter:
1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
2. expand the network adapters.
3. right click on the Ethernet adapter / wireless, and then click Properties.
4. click on the power management tab.
5 remove the check mark next to allow the computer to turn off this device to save power.
6. click on OK.
7 test cycle.Reset the TCP/IP settings on your PC:
1. go to your start screen/menu and type CMD.
2. right-click on the command prompt icon and select run as administrator.
3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
4 restart your PC and test.It can also help to reset the winsock catalog:
1. go to your start screen/menu and type CMD.
2. right-click on the command prompt icon and select run as administrator.
3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
4 restart your PC and test.Reinstall the NIC drivers:
1. download the drivers from here , but do not run them again.
2. go to your Start menu/screen and type Device Manager.
3. expand network adapters.
4. right click on the wireless adapter and choose uninstall.
5 install the drivers downloaded in step 1.
6. restart your PC and test.Test an ethernet connection:
Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.Test another connection:
Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.
Source: fixes Common for wireless connectivity problems.
Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
Have a great weekend!
-
Having problem to communicate with the Dns server.
Hello everyone, I'm having problems with my connection when I click Connect to the network diagnose it shows me this error message.
"cannot communicate with the server of DNS (218.186.1.58).
I'm a fall of MMORPG and disconnect from the internet, when I was playing or surfing. Can someone help me solve this problem.
Hello Spiffie,
You can try to uninstall the Windows Update on March 11 to see if that solves the problem.
Remember that uninstalling the updates may require restarting the computer to complete uninstallation of the update. You will be notified to restart if the update does.
Please post to let me know if this helps J
-
Remote Desktop/RemoteApp problems
I sprung several days trying to solve this problem by myself, then on the phone with Microsoft productivity, and some of them aren't yet familiar with Surface RT. So with the RD in network connection is quite simple and effective, I hope some people here can confirm that they have the same problems or possible solutions.
As I see it, there are 3 interfaces where we can connect to RD on the Surface RT: Pre-installe Remote Desktop Office found via scanning and research, the metro downloadable RemoteApp and desktop remotely via the control panel).
I see where ping command is executed on the computer and port 3389 is open and oriented to the laptop, so I will state the problems I see with each when I try to log on a Windows 8:
(1) pre-installed RD:
It's great and the name of your computer is there for you and connected to your account and network ready. You have options like "Connect and don't warn me if server authentication fails" I think has helped many people on Windows Server with certificate problems.
Off-grid on Surface RT, however, you get «Remote desktop cannot find the computer _.» This may mean that '_' does not belong to the specified network. Check the computer name and the domain you are trying to connect to."
(2) metro UI:
It seems to do a ping the computer more quickly when you put: 3389 at the end of your IP address. However, no success after having tried with and without the end of the port. The messages I get are...
RemoteApp 3):
This is the solution I've seen in most tutorials,... but the reason given for not connecting, it is "the remote computer cannot be authenticated due to problems with its security certificate."
Instead of the option to bypass (which option 1 gives you), there is no other choice, and he says "Windows is unable to continue setting up this connection. Contact the administrator of your workplace. »
This message made me to learn more about the certificates that I always wanted to know. I tried to start MMC and ensuring that the cert listed in Remote Desktop has been copied to the folders of the confidence of the authorities certificate root (duplex as certificates on the local computer). I tried different combinations and did not really anywhere.
If someone connects via #3, please post care on your certificate if you can find it.
Any help on getting one of these methods to work is appreciated. It puts naked repeat that port 3389 is listed as open on my home network, the traffic is transferred to the correct PC and all firewalls are disabled until I can solve this problem.
Hello
Sorry for the delay in responding.
Assistance in connection with Remote Desktop problems are handled by technicians of the TechNet Forums.
If you are also facing problems with remote desktop on the computer Windows 7, then please post your question in the Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
Thank you.
-
Problem connecting wirelessly with Windows XP
I broke out an old computer and was about 6 years old, updates to do. now that those who are in fact, can't the Wi - Fi to connect to save my life. I messed around online looking for a solution and have yet to find one. It seems that my problem has to with Windows wireless zero configuration.
When I try to run the command sc query wzcscv I get this response:
enumqueryservicesstatus:OpenService [sc] failed 1060:
the specified service does not exist as an installed service.
Any ideas?
Assuming that you have spelled correctly when you ran the SC Query command (wzcsVC no wzcsCV), see http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking/wireless-zero-configuration-service-not-installed/5d798c92-58db-4567-94c4-7c5c0a16becd
-
Hello
I just got an Officejet 4500, and I am unable to connect it to my current wireless network. I'm AT & T U-Verse so I use 2Wire equipment. I have a Mac Book Pro, and I'm on Mac OS X operating system 10.5.8. When I try to connect, I get an error message saying something like "Failed to connect."
In the past, I had problems connecting my Airport Express to 2Wire. In order to make it work, I connected the router 2Wire and changed the WPA - PSK (TKIP) security settings and WPA2 - PSK (AES) to just WPA2 - PSK (AES). My Airport Express was able to connect without any problems.
Please help me to connect my Officejet 4500 to my 2Wire router. I note also that I'm not really tech savvy so I need instructions are written in simple terms.
Thank you in advance for your help!
Marc-Antoine
Tanisha Hey! Try as part of this support document: AT & T 2Wire routers: "Login failed" or "Can't find printer" Message, or cannot connect to a wireless network
I hope this will get back you on track!
-Sean
-
Having problems connecting to the Internet
Hello, one and all!
So, as of late I had problems connecting to Internet. I can connect to the connection itself very well, although it shows as "Limited". The thing that bothers me the most is that this problem is intermittent: some days, it appears, some days I have no problem with the connection to the Internet.I have tried all the following:-Reset the wireless network adapter-Contact network administrator (the link in question is a WiFi connection library; I'm the only one to have this problem, is not the connection itself)-Enabled Windows Update for updates and install them-Reset my computerAt one point, I was getting an error message that says "Windows cannot communicate with the device or resource (primary DNS server). I took measures to fix that (checked the option 'DNS server automatically get an address' under the screen properties V.4 IP (TCP/IPv4)), and now it's just going back to tell me that the error is with the network (which is not the case) or the wireless adapter (which I find more likely).I was wondering if anyone had any advice. I have not yet checked to see if my computer can connect to the Internet via another connection, but I imagine that if it is a wireless network card problem, I have this same problem also.My computer is an HP laptop that I bought in January 2013, and it came with Windows 8 is installed. I had previous problems with the Internet, but in the end, these problems have been resolved with a driver update through Windows Update. There is no such update now, however.EDIT: I just tried another diagnosis with the troubleshooting tool, and it gives me the "Windows cannot communicate with the device or resource (primary DNS server)' once more. I still have the "DNS server automatically get an address" option checked.Hi Jason,
This problem can occur because of corrupted network, TCP\IP drivers, or due to the damaged network card.
Method 1:
I suggest you to check if the problem occurs with a connection cable or not.Method 2:
If the problem persists, I suggest you install the latest network driver on the manufacturer's Web site and check if it helps.
The link: http://WWW8.HP.com/us/en/support.html
Method 3:
If the problem persists, I suggest you to reset TCP/IP and check if it helps.
a. press the Windows key + X, select prompt (Admin) and on ENTER.
b. at the command prompt, type the following command, and then press on ENTRY:
netsh int ip reset c:\resetlog.txt
Note: If you do not specify a path of the directory for the log file, use the following command:
netsh int ip reset resetlog.txt
c. restart the computer.
See the links for more information.
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problemsWi - Fi and in Windows network connection issues:
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsHope this information helps. Answer the post with an up-to-date issue report to help you further.
-
Having problems connecting to my router wirelessly with Equium L350
I can't find anything on my laptop to connect to a wireless Internet device, please help!
How do you mean that you can't find anything on your computer to connect to a wireless device? You must activate the wireless card by sliding the switch to the right. In addition, you can activate the card wireless via the keycombination 'FN + F8'.
A better description of your problem would be more useful. :)
Welcome them
-
Having problems connecting iPhone 6s for iMac with OS Lion
Hi all.
I have an iPhone 6s and a mid-2011 iMac that is still running on OS Lion. When I connect my iPhone, I get the message "the iPhone is useless because it requires a newer version of iTunes." So I checked that, and I am running the latest version. When I open iTunes, I do not see my camera, and all the menu options of synchronization are gray.
We were reluctant to upgrade to El Capitan because of negative comments about iPhoto (specifically, how the upgrade removes all events that we named so laboriously since we bought the iMac). We just bought more RAM for our machine (which can contain 16; we currently have 4 and we'll be adding more 8) due to the frequent occurrence of the rotation color wheel.
Any ideas on the cause of the iTunes/iPhone/iMac problem or how to fix it?
Thank you!
You are running the latest version of iTunes that your Mac can run on your current OS X, however, is not the latest version of iTunes. 12.2.x is required for synchronization with any device running iOS 9. It is iOS that requires the latest version of iTunes, not the type of device.
Sorry, but you need to update your OS X in order to be able to download the latest version of iTunes, which is 12.3.2.35
Sorry
GB
Maybe you are looking for
-
How can I remove the tones created in garageband that have been uninstalled? I also installed but I can't remove it either please help thanks
-
Hello, I found my old iphone 4 which is factory unlocked, I used it on my local sim card and it was fine for almost 2 years, then I updated to ios to 7.1.2. and now when I turn it on it says that the sim card is not acceptable. How can I solve this p
-
HTTP Post documentation does not mention the forums (BUG)
Documents of the VI of HTTP post (see here) do not mention that there are 2 instances of this VI. It contains only the help on the string instance. Right-click on the VI shows that it is a polymorphic VI, with a buffer (string) and the instance of th
-
Blue Screen Error Code Caused by hal.dll and ntkrnlpa.exe 9F.
original title: BSOD error Code Caused by hal.dll and ntkrnlpa.exe 9F. Currently, I'm having a problem on a Fujitsu T1010 with Windows Vista x 84 installed tablet. At a random time that I use my computer, I get a generic blue screen with information
-
Help! I can't validate my Windows 7
I had a lot of technical problems in trying to validate my Windows 7 operating system. I have been using a genuine Windows 7 key and disc years but had to make several relocations from my computer in the year due to viruses and spyware. And now my ne