Similar Questions

• Satellite C50 - Has - TV HDMI not recognized

  Hi all

  I just bought the Toshiba Satellite C50-A-U19 (pscg6e) with 64-bit windows 8 3 days ago. Connecting HDMI to my TV worked for 2 days, but right now the phone does not display TV as a device.

  I tried several starting sequences and tried to "find new hardware" in the Device Manager. I changed the HDMI ports on the TV. However, there is no sign that the TV is recognized. I tried using +.

  but because no additional monitor is found, nothing happens.

  I changed the HDMI cable and tested the cable (and the TV HDMI port) with a playstation.

  I downloaded and installed the latest drivers to display on the toshiba site. I tried to use the Device Manager to see if updates are available, windows tells me that I already have the latest drivers.

  I used the "System Restore" feature to restore the configuration of a day, but to no avail. I spent about 3 hours trying to solve this problem, and I'm so frustrated right now.

  I am absolutely no idea of what else I can do at this point to get the HDMI to post a link to the top with my TV. Any help will be greatly appreciated. Please please please help me!

  At first, I have to write something that has nothing to do with the problem described: Please create a preinstalled use recovery media creator Toshiba recovery media. It is very important to do with the new laptop.

  As I see you have almost tried everything but as the last step I recommend to install the OS using this recovery media created. After that make this laptop will be new factory settings. It will be interesting to know if everything works again when the laptop has settings from factory again.

• External monitor (projector HDMI) not recognized in CC AE or AE CS6 with the new Macbook Pro

  You have a very difficult problem that maybe someone can help me find a solution.  I had an old Macbook Pro (2009-ish) I was using with AE and my HDMI projector to do the work of projection mapping.  The laptop computer motherboard used recently (not linked, I don't think) but now I bought a new Macbook Pro and am trying to use the HDMI output to the projector as my external monitor in After Effects (I tried both CC and CS5.5 and CS6). Under Preview video it does not appear as an option to send to (the choices are computer monitor only or Firewire).

  I'm a mess that I'm supposed to do a show tonight with the installation I did many times with my old Macbook and AE and now can't do it at all. I have to be able to have the projector receive EI feed - and nothing I've done so far has helped. The system sees the projector, then why doesn't AE?  I can't drag the window of the program in the projector window space and expand - there must be exactly 1920 x 1080 in order for me align correctly.

  If there is Adobe TAPI people this morning, I'd CERTAINLY appreciate your comments, as well as any other person who might have had similar problems. It should work, it should be a no-brainer. Right now I'm running a new STANDARD Apple Macbook Pro with HDMI output and the latest version of AE CC with all updates done. Please, please help!

  Thanks in advance,

  Bill

  After Effects does not come with components for an HDMI output.

  Your other computer must have installed additional components that adds this functionality.

  See this thread for more information:

  http://forums.Adobe.com/thread/1006705

• HP 15-r248nf: hdmi port not recognized on HP laptop after windows 10 update

  Need help! My laptop HP HDMI port does not work, apparently, that the HDMI is not recognized after the last windows 10 updated.

  Hi Lyn11,

  Thank you very much for your quick response. Yes, there are ways to find the product # and the n ° of the device.

  • On the desktop, (first screen of windows with all programs closed) Please press this key combination to bring up the system information which will also give the product # of the unit. Please, note it and n ° of the series unit. Don't post not your n ° of set of information on HP forums. Press the fn key (function key) and press "ESC" on the keyboard at the same time to bring up this information.
  • You may also locate in the bios. Please turn the unit off.  Wait a few seconds and as soon as you put it towards the up keep pressing the "Esc" key immediately, gently several times.
  • It will bring up the start menu. Then press the F10 key to go into the bios. The bios will also give the serial number information and product.
  • A third way to locate the product # would be to power down the device. Unplug the charger and remove the battery.  Then use a flashlight to look inside the compartment to locate the product #.

  Please visit these links which may provide more useful information.

  Link1: http://h30434.www3.hp.com/t5/Notebook-Audio/AMD-HDMI-port-on-dv7-laptop-is-lost-after-Win10-free-trial/m-p/5813013#M78967

  Link2: http://h30434.www3.hp.com/t5/Notebook-Video-Display-and-Touch/Boot-Device-Not-Found-Error-When-using-HDMI-cable-only/m-p/5803624#M139030

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well. Please keep me in the loop.

  Just to say thank youPlease click the ' Thumbs Up 'button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• HIS Radeon HD 4670 not recognized by Win 7

  OK, now that the S6500NX is finally installed with Win 7 Home Premium 32 bit, the only remaining obsticle becomes the system to recognize the video card: a HIS Radeon HD 4670 ("Itceq" AGP 8 X 1 GB of DDR3 memory). It is compatible with DirectX 10.1. I chose ' AGP/Onboard' in the Bios. I've been messing around with different versions of the driver catalyst of 9.x, 10.x to 12.4 (later). The driver seems to be without error, but the adapter or the driver is never automatically recognized by Windows. If I go into Device Manager and "update driver" manually, then select the driver Radeon HD 4670 WDM (not mobility one!), and reboot, the Device Manager has a yellow "!" and said that it has been disabled (all versions 9.x driver to 12.4 said that). I have tested the card in my Gigabyte Triton of K8 system (under XP SP3 but not on the network) and XP sees the card very well.

  Many tech sites (for example, TomsHardware.com) talk about this card and seems to be problematic for some facilities, emits some Catalyst driver, but by all accounts should be recognized by Win 7.

  When the adapter has been installed initially, Win 7 assigned adapter VGA Std 'graphics '. The monitor is an old Dell M782, who did not detected, but because it's using the adapter in windows Std no refresh values appears. hdwwiz recogise the adapter and select strives in hdwwiz shows only those from Intel.

  Issues related to the:

  1. Is this a problem with Win 7 or HIS or the driver Catalyst? (or some combo)
  2. This card is even compatible with Win 7 32 bit?
  3. What is an AGP bios on A7V8X - LA motherboard problem?

  Thanks in advance,

  Thom

  People,

  Not one night white, but close enough. After crossing scenarios and options, try different drivers and pieces of hardware, I found a solution. Problems with possible HDMI and its conflict with its edge (from Paul - thanks!) gave me the idea. I also found the driver AMD AGP hotfix file.

  When I started this process, install Win 7 Home Premium 32-bit on a new HD in a S6500NX I did with the Creative Sound Blaster installed PCI (disabled people onboard in the bios) and the 4670 HIS HD Radeon Itceq AGP 8 X graphics card installed (AGP / enabled in embedded bios). I knew that I had to install a separate driver to get the new 4670 to work with Win 7 (from the list of compatibility with MS). I've always done the express installation. Because the card has never been recognized automatically and manually select a driver always gave place to a yellow '! ' in Device Manager, I have assumed that the existence of a conflict, but didn't know where to start. Reading the various posts here and elsewhere, brought me to believe it was a problem of cpu/bios/agp. It was not, well not quite, at least not the mobo directly.

  I suspect that the conflict was with the device IRQ audio and HDMI sound IRQ, but it is also a matter of AMD AGP with the driver. Once I found the driver 12.3 hotfix (12.4 pilot btw does not work either) AMD, I decided to do a custom installation and do not check the HDMI Audio option (so it should not be installed). Now, at this point, I had taken on the Sound Blaster and always had the sound edge off, so no sound, but has not removed the Creative drivers. Rebooting the system after installation of the driver of 12.3 hotfix for the HD 4670 (without the HDMI sound) Windows 7 recognized the graphics card! The Catalyst Control Center worked, graphic refresh rate and the monitor are now available: everything worked!

  Now, sound. I reinstalled the Sound Blaster card and booted up the system. It worked also. The system is now complete! Ecstatic!

  I'm exhausted. I suspect that the problem is somewhere in the allocation of resources for audio devices, simply not ready to everything tear and test this theory (i.e., re-installation of the verified audio HDMI driver AMD should lead the 4670 is not recognized due to a conflict with the sound card or indeed integrated sound card). In addition, there was the problem with AMD and AGP drivers.

  I finished.

  However, one thing still (somewhat) bothers me: why is there never a Compaq/HP logo at startup (no option in the bios to disable/enable) given that in all likelihood, it would take... This is the life. Maybe it has something to do with "service packs" (whatever they are - jk) and the 'care' of Compaq/HP files (could care less).

  Thom has left the building - good day to all.

  Blessings to all,

  Thom

• HP 251-a123w: DVI - D port not recognized

  I have a HP Desktop 251-a123w which was delivered with a 22uh HP monitor.  Only a VGA cable was included, but HP 22uh monitor has HDMI, VGA and DVI - D ports.  I use the system with the monitor connected to the VGA cable until Saturday.

  Saturday I shut down the computer and the 22uh HP connecting its port DVI - D port DVI - D on the computer using a DVI - D cable.  Then I connected an Acer X193w monitor is VGA port on the VGA port of the computer using a VGA cable.  I want to have a Setup dual monitor.  HP support for my model site indicates that both ports can be used at the same time.

  Well, my computer starts by using the Acer monitor to the VGA port but the HP 22uh simply displays a message "Not connected Signal Cable!".  Nothing I did make the HP 22uh start on the DVI - D port.

  I've updated the drivers, I rebooted the computer several times.  I started the computer with only the monitor 22uh HP connected through a DVI - D cable and still do not recognize the monitor.  I uninstalled the display adapter and then restarted, is yet to recognize the DVI - D port (or maybe that the monitor is not recognizing cable, I don't know).  I have the HP 22uh monitor turned off and restarted, still nothing.

  Any suggestions?

  OK, dug the manual out of the garbage, "Input Select option in the OSD menu.

  Had no experience previous selection of entry on a monitor...  Who reads the manual for a monitor? SMH

• Canon Vixia HV40 HD camcorder not recognized on IEEE1394

  Windows 7 does not recognize the camcorder HD on IEEE1394 (= Canon Vixia HV40 camcorder. It is compatible Windows 7)

  Camcorder Canon Vixia HV40 =. It's Windows 7 compatible according to the Canon website -http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=177&modelid=17996

  IEEE1394 card was not recognized initially by Windows 7, so returned to the "legacy" driver, then the card was regognized

  But the camcorder is not recognized

  Camcorder is recognized on another computer running Windows XP with * same * map out and installed on this computer XP IEEE1394)

  Windows 7 Home Edition

  The same camcorder is also not recognized when connected to Windows 7 via USB

  Use the USB port... connection... Your camcorder is MPEG-2 MPEG-2... is a DVD Format ================ USB terminal ================	NO - a son of the late connection... NON - DV, mpeg2 is already a compressed file. DV - is called the great Fame(un-compressed)... This is the best EDITING-format/1080 p is just as good. ===================== USB 2.0 Full Speed---> > Firewire ((NOT)) ================
  Video Terminal	component (output), composite (output)
  Audio =.	DV: 16-bit (2ch) 48-bit 12 kHz (4 channels) 32 kHz 4ch synchronous recording HDV is not possible: MPEG1 Audio Layer II (2 ch) (4 channels playback of cassettes containing recordings of 4 possible channels) ())-->> these would require the CANNON... cables of product...
  Hot shoe	Advanced
  Supplied video editing software ==============	None ======================
  HDMI Jack ((This looks like a reading of TV output)) ==============	HDMI Type A connector (output) (19 pins) ======================
  Microphone Terminal	stereo 3.5 mm mini-plug
  AV Mini helmet/Terminal Terminal	4 pole mini jack 3.5 (video/audio, entry and exit)
  Dimensions	(W X H X D) 3.5 x 3.2 x 5.4 in. (88 x 82 x 138 mm)
  Weight (not including lens and battery)	1.2 lbs (535g)
  Weight	1.4 lb (615 g)

  MSM-2010

• iTunes not recognizing iphone

  Hey guys, last updated itunes is not recognizing my iphone.

  Uninstalled and reinstalled iTunes several times, everything is up to date. I also tried the thing of driver device manager update, but the apple usb driver is not present even after I have reinstall and uninstall iTunes, all solutions? p.s Also running windows 10.

  Hello, you should see this article, it will help you If iTunes does not your iPad, iPhone or iPod - Apple Support

• My IPhone 6 is not recognized by my IMac

  My IPhone 6 is not recognized by my IMac

  What operating system do you use? If you mean that it is not recognized by iTunes and you use 10.7 as your profile is displayed, you will need to upgrade your operating system to get the latest version of iTunes.

• Logitech C310 Webcam not recognized

  I have a Mac Mini from 2012 which I just upgraded to Sierra. Everything went well except the webcam, a Logitech C310, is not recognized by the operating system. He keeps his identification as "unknown device". It doesn't seem to work properly, but I fear that it is not properly recognized by the operating system.

  Anyone else have a similar problem with a Logitech webcam that faces a problem?

  Contact Logitech technical support. The camera may be incompatible.

• Updated itunes 12.5.1 and iPhone not recognized now

  I upgraded to itunes 12.5.1 and now my itunes does not recognize my iphone when it's connected.  I have a new laptop with Windows 10.  Can anyone help please?  I want to save my phone before I upgarde to the new iphone 10.0 software.  Thank you!

  Hey cbaron12,

  Thank you for being a part of the communities of Apple Support.

  I understand that your iPhone is not recognized in iTunes on your Windows PC.  It of a good idea to always backup your iPhone, so in order to get this problem solved, please follow the steps in the link below.

  If iTunes does not recognize your iPhone, iPad, or iPod

  See you soon.

• iPhone, iPad Air 2 not recognized by iTunes

  Very frustrated right now. Given that Apple's Support is not in contact with return despite requests, the story will go here. I have Windows 10, iPhone 6 + and iPad Air 2. Last weekend I was invited to and did pass to iTunes 12.5.1.21. Plugged my iPhone 6 +. Not recognized by iTunes; 'sync' gray. Tried the same thing with my iPad 2 Air. Same result. I get no error message.  Here are my troubleshooting - what I'm missing, Apple?

  1. Lightning card Checked, works fine with other devices.
  2. Rebooted PC.
  3. Rebooted IPhone.
  4. Restarted iPad Air 2.
  5. I've tried different start up sequences (start iTunes connect manually; first)
  6. Went to 'Upgrade device via Device Manager' - these devices are working properly.
  7. Updated my iPhone and iPad 2 air for iOS 10 successfully.
  8. Apple email support; 48 hours later they gave me another email address for contact.
  9. Chose the Contact Apple Support via phone option - screen "we will call you - your phone will ring at any time.  Still waiting for the phone to ring.
  10. From Discussions on Apple's site with troubleshooting tips, have tried all suggestions with no luck - If iTunes does not recognize your iPhone, iPad or iPod - Apple Support.
  11. I even opened and closed the blinds completely throughout my house to see if that would help.  Go figure.
  12. The last resort on them, says "Contact Apple support" - see #9 above.  Twice.

  Apple-Support - What should I do at this point?  I'm all ears, and Android is looking better and better during my next upgrade.

  Happy to report that I finally found a position that has fixed this. Someone has to give Community contributor turingtest2 a price, they had an incredible post in communities that have corrected my problem.  See below for the excellent suggestions.

  iOS device do not show in iTunes for Windows

  iOS device do not show in iTunes for Windows

• 6 10 iPhone iOS is not recognized by the laptop Win10Pro

  6 10 iPhone iOS is not recognized by the laptop Win10Pro

  After the upgrade to iOS 10 on my iPhone 6, is is no longer recognized as an external drive by my Win10Pro x 64 laptop on USB 2.0 or 3.0 port. New cable is used to eliminate that as a problem.

  Why is this happening?

  I come to the last iOS 9.x.x?

  Y at - it and the new driver I need to download on my PC?

  I started to automatically backup icloud, but I want to import photos directly to my PC.

  Thank you

  Vicki

  Try opening the iPhone before connecting to Windows. If the film is not empty, then the device should be listed in Windows Explorer. If it still does not show try to restart the computer and the device, and then try again. If it does not show more in iTunes then try iOS device is not showing in iTunes for Windows.

  TT2

• After upgrading to itunes 12.5.2.1 my iphone is not recognized as a device in itunes

  After that I upgraded to itunes 12.5.2.1 and IOS 10 September 14 my 6s iphone is not recognized as a device if I sync my PC with Windows 10 on it.

  Help, please.

  Any body else with the same problem?

• My program iTunes windows is not recognizing my iPhone more than 6 s

  I have installed ios 10 but my iPhone 6 s more is stuck in recovery mode and my iTunes account is not recognizing the device to complete the update or restore.

  The first thing to do is to make sure you are using iTunes 12.5.1, like this version, released on September 13, 2016, are the first to recognize and prepare for iOS 10 version.

  Next:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support