HDMI plugged into the laptop but the video is not fully played through television.

Similar Questions

• This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

  I tried to connect a new TV to my 8700 with HDMI and I get this message:

  This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

  1. power off the computer
  2. plug the cable from the monitor into the graphics add-in card connector. This may require a video card or the video adapter cable.
  3. turn on the computer

  I unplugged from the back of the computer and put it in my drive macbook & blu - ray. Both worked.

  I tried to find a solution to this already, but none really helped.

  Thank you.

  You need a video card, not the port on your computer HDMI connection:

  

• (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

  Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Tip: when you post a message, preferable to always include the computer model.

  Bev.

• Internal computer speakers will not work unless the headset is plugged into the laptop - Windows 7 - TOSHIBA

  If the title pretty much sums up it.  Speakers of my laptop won't work if my headset (or other external speaker) is plugged into the jack Socket 3.5 mm on the front of the laptop.  This is a new feature for Windows 7.  Long story short... the helmet and work of laptop speakers when the two are connected, or work with the unplugged helmet.  Thanks for the help!

  Control Panel of Goto-> Sound-> reading tab. Right-click on the speakers and select default Setas.

  If it didn't he try to go to-> troubleshooting Control Panel and select troubleshoot audio playback. Follow the prompts.

  Hope that helps.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• iPad tells me "Not Charging" when plugged into the docking station

  It is a very new problem for me. I had the iPad the same docking for the months and not had a problem. But now when I plug in, the iPad now tells me in the upper corner is it 'not supported' y at - it something I can do to fix this?

  There seems to be something that is changed with iOS modified 10 power requirements for the load.

  No idea when or if things will change, so all users can make use of the work load by plugging into the wall.

• Connector MagSafe 2 (the part that plugs into the computer) is getting very hot.

  Hello! I have a MacBook Air (Early 2015) and when I load it, the plug that plugs into the laptop is very hot (I can barely touch). This only happens when I use the computer while I am it loads. When MacBook is in mode 'sleep' the plug only heat. Is this normal or something in my MacBook is broken?

  Hello...

  Make sure it is well ventilated > use and maintenance your Apple MagSafe adapter - Apple Support

• Why many cinema screens have half-a-block of pine, to plug into the full-size DVI connector?

  Why have the many Cinema Display (especially the 2005-20-inch model) half-a-block of pine, to plug into the DVI-connector socket full large?

  The other half-a-block of pines just doesn't seem to be there?

  DVI can be single-link or dual-link.  Resolution higher than 1020 x 1200 need dual-link.

  http://www.showmecables.com/images/catalog/product/DVIQA.jpg

  Sometimes simple link devices and cables use dual-link connectors, but with no wires connected to the pins double link, if you can not tell if something is dual-link just by looking at the connector.

• Time machine automatically upwards a WD passport when its plugged into the machine of time rather than the macbook?

  Hello

  I have a Macbook Pro with a WD passport for mac that I keep all my photos on.  I know that time machine will back up there if I plug it into the mac and select it to be excluded from the United Nations through the time machine preferences, which I did, but I generally keep the Passport plugged into the time machine itself and use wireless.

  However, I don't really know if time machine is it backs up this way, or if it's just a wireless router that allows me to access the Passport.

  How will I know if it is saved?  And if not, how can I save it while it is plugged into the time machine?

  Unfortunately, it seems as if you are confused about the terms of Time Machine and Time Capsule.

  Time Machine is a software on your Mac, which is used to back up your Mac hard disk... like a Time Capsule

  A Time Capsule is material... more precisely a wireless router with a built-in hard drive that can be used to store backups Time Machine .

  With this information in mind, can clarify you what it is you want to do?

• VN7 - 791G: Wifi slow and unreliable when a USB drive is plugged into the USB ports on the right.

  WiFi becomes quick and reliable whne the memory stick is disconnected. Always reproducible. Does not occur when the memory stick is plugged into the USB port on the left. Also has anyone seen this behavior?

  Wireless network adapter Qualcom Atheros QCA61x4 with the version of the driver 12.0.0.230 dated 03-2016-21.

  Thank you

  Chris

  Hello

  The explanation is simple. I'm sure that the memory stick is a USB 3.0, a plugged in a USB 3.0 port. The problem is that all USB 3.0 devices generate a 2.4 Ghz interference, as it generates interference on the frequency working on wireless. The solution is to connect the player to another port or to spend the 5 GHz wifi if your router supports. The wifi antenna is probably very close to the port and to the USB key.

  This is known for a long time, and has nothing to do with the laptop.

  There is an article on the Web page of intel who described the problem more technically. You can search if you wish.

  This causes a problem also with a wireless mouse, if the receiver is connected next to a USB 3.0 stick or any other device.

• Reference DELL E510 won't record sound from the microphone plugged into the rear microphone port

  What is the problem with this DELL E510?  I tried to record the sound of port rear mic on this machine with Windows XP and now Windows 7. (Previously, I had recorded my old Dimension 2400 without difficulty).

  The E510 (which was originally a Media Center Edition with Windows XP) but who now has Windows 7 Professional, Service Pack 1 shows the following messages after I launch audio troubleshooting:

  "Audio device is disabled." and also, another message saying, that at least one of the Windows Audio services and/or generating Windows Audio endpoint are not executed.

  I have all the correct settings of the sound and a microphone to work plugged into the microphone port back. Obviously, speakers are working correctly.

  Please notify. Thank you.

  Thanks for your reply.

  I have sound, only the inability to record sounds through the rear microphone port.

  Early yesterday morning, I dropped on a solution for the use of rear microphone.

  I plugged my microphone in the front Tower mic port.

  I downloaded the free version of "RecordPad Sound Recorder" AND can't seem to record my voice in the computer through the front mic port.

  No worries!

• How do I do to get the slide to set up to go to the right and continue? I was up half the night and is not wrong. The only thing that I just did is plugged into the wall outlet and now I'm right back where I had problems. Why keep this product?

  How do I do to get the slide to set up to go to the right and continue? I was up half the night and is not wrong. The only thing that I just did is plugged into the wall outlet and now I'm right back where I had problems. Why keep this product?

  What do you exactly mean by "get the slide to set up go to the right and continue"? Can you give us a little more context and detail?

• My iPod stop now, it won't turn even after be plugged into the power supply for more than an hour

  IiPod touch than 64 GB itself now cut an hour plug into the current af it starts

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  If I shut down the computer and plug... he sees the thing then turned back...
  I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
  any thoughts?

  Hi KK Waddell.

  Thanks for posting in the Microsoft Community.

  I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  I suggest you to see the links and check.

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/?kbid=885624

  See also:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

• Can Windows Media Player XP play MTS file type? I tried, but the video does not play smoothly. Is this fix really?

  I tried, but the video does not play smoothly.  Is this fix really?

  There is a possibility that Windows Media Player could
  read the file if you rename the MTS to MPG or AVI.

  And/or...the suite of freeware Media Player can be
  worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)
  (The name of the file to download is: "MPC - HomeCinema.1.5.2.3456.x 86 .exe ')

  If this fails, it may be worth trying to convert the MTS file
  WMV format:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converters are a few examples:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  You will need to unzip the file... or you could just drag
  the Setup.exe from the file out of the folder and drop it on your
  desktop and install from there.

  Once installed... Open Sothink and go to... Add the files button...
  Find and select the clips you want to convert.

  Next... in the encoding settings... Choose... Video credits.
  WMV - Windows Media Video (*.wmv).

  Choose an output folder and on the left, click on the button convert.

  You can experiment with other settings later but
  This should help you get started.

  (2) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• In Windows 8, all my video files (is a mod and.) MOD) show a generic icon of MPEG and NOT a preview of the image. does anyone know a fix? All my photos preview very well but the videos are not.

  In Windows 8, all my video files (is a mod and.) MOD) show a generic icon of MPEG and NOT a preview of the image. does anyone know a fix? All my photos preview very well but the videos are not.

  I have the same problem with. Recording with my camera JVC Everio MOD files.

  The problem is that. MOD files. All thumbnails of film appears correctly.

  I have not had the problem on Windows 7, but my new 8.1 Windows based PC does not display thumbnails for previews. MOD files... but the other movie previews shows correctly. 'Show thumbnails instead of icons' is checked.

  Can anyone help?