HELLLP PLEASEE - submit a text string in a specific search field

Similar Questions

• detection of changing text string values

  Hi, I have a text string, the string length is more than 10,000.

  Whenever the value of this string changes, I need to detect and know the index.

  I can loop through the channel and compare if the channel is short. The best ways to do this?

  Thank you.

  Hi IIx,

  The ChnFind expression can only reference global variables of DIAdem.  Then you have to be your "Str2" variable GlobalDim() or simply use one of the existing temporary T1, T2... variable.  Also, you want to refer to all of the channel in the expression, not only one of the values of the string.  The motivation to use ChnFind is so looking through the canal enters the call function and not with primitive VBScript.

  T1 = "Group1/channel 1".
  
  T2 = 'test '.
  
  startIndex = 200
  
  Indexfind = ChnFind ("Ch (T1) T2 =", startIndex ")

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Convert a Boolean trigger in the text string

  Hello

  I would like to know if it is possible to convert some text buttons in a single variable text string.

  Let me try to explain:

  I have 3 buttons: Simulation, send, Quit

  Now, I want to use a case structure, in which it is possible to switch between these 3 options.

  So if you press the button for a second, I would have a string of text with the text: send.

  If I press Quit, having to turn into Quit, text string even if I can connect this string to the structure of the case.

  Is this possible? It sounds easy, but I can't figure out how do it in a simple way.

  How I did it: Boolean convert (0.1), these values multiplied by a number,

  for example (1,2,3), but to make a deal with (1,2,3) structure and write the right text in a text string.

  But I think it can be done much easier, isn't it?

  Thank you!

  Hello

  Check the attached VI. I think this should help you. The mechanical action of the buttons are "switch until released. You can change it according to your requirement.

  The second example uses the Structure of the event.

  Kind regards
  Nitz

  (Bravo to give good answers, mark it as a solution if your problem is resolved)

• Text string in array of integers - with law enforcement in the text string-

  Hello

  I have a text string containing the measurement frameworks.

  I want to place each image in a first time 0, 11 x 11 array (with the same order in the text file).

  In the figure below, I tried to convert it to a table, but the table only contains the first "column" in the text file.

  Any suggestions?

  

  Crows is right, your channel is very dirty, with a variable number of spaces, lines starting with spaces and space + newline delimiter.

  In such cases, I like "scan of the channels for tokens", because it can automatically enter into identical consecutive separators in a single. Here's a quick example.

  

  Your lines are of variable length, a 2D picture seems inappropriate, because all rows have the same number of elements. For example, consider a table 1 d of clusters containing the tables 1 d.

  (Of course, it would be cool "worksheet in table string" could deal directly with identical consecutive separators as found here, so thank you for supporting my idea.) He deserves more than 24 voice )

• Insert variable in the text string

  Hi, can someone help me insert variables in a text string? I use the "base series writing and Read.vi in labview.

  I need to send the following string to the serial port:

  Normal 0 false false false fr X-NONE X-NONE MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-margin : 0 cm ; mso-para-marge-bottom : .0001pt ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  -$$ INPUT1SMSPHONE = numbers1, telephone2, phone3

  -$$ INPUT1SMS_WSEC = 5

  -$$ INPUT1SMS_DATAON = MESSAGE TYPE SMS HERE

  How to do a vi with numbers1, telephone2 phone3 and TYPE SMS MESSAGE HERE as variables and send it to the serial port?

  If someone could make an example vi that would be fantastic.

  Kind regards

  Mark

  Thank you for your quick response. Your example is perfect thanks mate.

  See you soon,.

  Mark

• Debug: how to search a text string (s)?

  In the debug command, how to search for a text string?

  I tried both a mystring' and 'mystring' ' does not.  They return all two syntax errors ("^ error").

  "According to aid debugging (" "?" command "), the syntax is the list of the range".  Note that no argument is indicated as optional.

  If I enter a range, what is the syntax in general?  And what is the syntax for 'all '?

  I tried * 'mystring' ' does not.  I get the syntax error (' ^ error ") pointing on «*»

  And what is the syntax for the 'list', in particular to specify a text string?

  I wrote:

  In the debug command, how to search for a text string?

  Well, duh!  A Google search for "debug windows" (without the quotes) found this handy employment guide:
  http://thestarman.pcministry.com/ASM/debug/debug.htm.

• When I enter the "Eubacterium' infirmum text in a cell in Excel, he eats the leading". " It's killing later logic based on obtaining all text. How to repair Excel to stop eating "of text strings?

  When I enter the "Eubacterium' infirmum text in a cell in Excel, he eats the leading". "  It's killing later logic based on obtaining all text.  How to repair Excel to stop eating "of text strings?

  In Excel, an apostrophe at the beginning of a text string has a special meaning as a character of text-alignment prefix . To start a string with an apostrophe, type two of them.

• Error # n/a... using worksheet Microsoft Excel v. 12. read the article by which Ashish Mathur, Microsoft MVP, describes how find and disseminate an alphanumeric text string figures

  using worksheet Microsoft Excel v. 12. read the article by which Ashish Mathur, Microsoft MVP, describes how find and disseminate a text string figures.
  = 1 * MID (A1, MATCH (TRUE, ISNUMBER (1 * MID (A1, ROW ($ 1: $9), 1)), 0), COUNT (1 * MID (A1, ROW($1:$9),1))) j'ai essayé plusieurs fois.)) copy / paste, in vain. I can't get the formula that allows? I get an error "# n/a '... of ideas please? Thank you

  Excel:

   

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Excel.misc&lang=en&CR=us

  Discussions in Excel General questions.

  They will help you with your questions Excel when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• HOW DO I SEND THE TEXT STRING TO THE BROWSER

  There someone now how I would go about sending a text string in a program in a web browser

  Please please please PLEAAAAAAAUSEEEEEEE help me someone

  I think that EventInjector should work for this case. Do a search in the forum for EventInjector and take a look.

  Scott

• Analyze and display a text string that has HTML tags on blackberry java screen

  Hello world

  I have a string of text that has some HTML in there. I want to display this text string to the screen of blackberry java by analyzing these HTML tags.

  Here is the text of the string.

  
  Large bright digital display
  Six output Modes
  Automatic test systems

• Sound signals

Discrete outputs
• Isolated circuit
 
• Digital error detection
  

Thanks in advance!

Vinay.




Hello

Displag a String with HTML tags problem solved!

Here is the code snippet.

BrowserField _bf11 = new BrowserField();
prodDescManager.add (_bf11);

String Highlight2 ="
Seat and head radiolucent
Manual control for instant CPR
IV pole;
_bf11.displaycontent (Highlight2, "http://localhost");

Vinay.

• REGEXP_REPLACE how to loop through the occurrences of a text string variables

  Hello

  I use a 11.g Oracle procedure. I found an example of REGEXP_REPLACE with only two arguments (input and model) and created a procedure based on this example. The Replace function works, but not optimally. I try to use REGEXP_REPLACE to loop on a variable number of occurrences of a text string in a local variable of CLOB.  The string occurs after the text base64 (base64 comma) and before the text "/ > (double quote space oblique superior - only)."  I can do replace it work for a single occurrence, but I can't do it properly in a loop.  These embedded strings include images that were inserted in a rich Apex text field.  This is a rich text field is assigned to the CLOB p_html.

  Declare p_html clob;
  l_image_clob clob;
  l_image_count number;
Begin
p_html := '<p>Some header text base64,one start here and then this is the end one" /></p><p>Some header text base64,two start here and then this is the end two" /></p>';
l_image_count := REGEXP_COUNT(p_html, 'base64', 1, 'i');
If l_image_count > 0 Then
  For i In 1..l_image_count Loop
  l_image_clob := REGEXP_REPLACE(p_html, '(.*base64,)|(" />.*)');
  dbms_output.put_line(l_image_clob);
  -- code to process each occurrence individually.
  End Loop;
End If;
End;

  What I would like to see results of the data are:

  tenure here and that's the end

  two beginning here and that's the end of two

  The results I get are:

  two beginning here and that's the end of two

  two beginning here and that's the end of two

  Thanks a lot for watching this.

  Hello

  From Oracle 11.1, REGEXP_SUBSTR is better than REGEXP_REPLACE for this sort of thing.

  What produces the output you asked for:

  Declare

  CLOB p_html;

  CLOB l_image_clob;

  number of l_image_count;

  Begin

  p_html: = '

  ' Some header text base64, start here and then it's the end "/ >

  Some header text base64, two start here and then it's the end of two"/ >

  ';

  l_image_count: = REGEXP_COUNT (p_html, 'base64', 1, 'i');

  If l_image_count > 0 Then

  For i In 1... l_image_count loop

  l_image_clob: = REGEXP_SUBSTR (p_html )

  , "base64,(.*?)" / > "

  1

  , I - letter i (loop variable), not number 1

  , 'i'

  1

  );

  dbms_output.put_line (l_image_clob);

  -code to treat each case individually.

  End loop;

  End If;

  End;

  /

  The 4th argument to REGEXP_SUBSTR specifies where desired appearance (starting with 1).

  The 6th argument is a backreference. 1 means you want to return all that match the expression starting with the 1st '('. gauche)

• Display the text string on the Capture window

  Hello
  

  To capture is used difference two camcorders. What I have is a display of text pasted on the capture window. I do daily catches and what is new. Don't know how the text string is found on the capture window. Capture saves the film along with the display of text. I need to remove this information in order to have a full, clean with only the material captured.

  Attached a picture showing the information that needs to be removed.

  I use Adobe Creative Suite CS6 with Premiere Pro CS6 on a HP with Windows 7 pro 64-bit z800.

  Thank you!

  

  

  Well.

  I played on several bands and this one has its own text. It is burned in. This is most unexpected.

  Other assets play very well, as expected.

  Thanks for the idea!

  Now, I know.

• Is there a way to have Acrobat Reader to count the number of times a specific text string appears instead of just pointing out their?

  Allows CTRL F to find the text that I'm looking for, but I'm looking not only for them, I'm also trying to count how many times the string appears in the file.  Y at - it a function or one way to do other that manually hit F3 and hoping that I have caught all of them when the program highlights many instances instead of each of them individually?

  Hi nancib92837443,

  You can use advanced search option (CTRL + SHIFT + F) which provides the number of instances for a specific search.

  Thank you

  Abhishek

• How to convert the currency amount in a text string?

  Is there a simple way to convert a quantity of money (with a variable number of characters but always two decimal places), a text string? Currently we send UPDATED at the end of a session, but the data warehouse is only set up to accept the text values.
  
  We use version 9.4 of the software if it makes a difference.
  
  Thank you very much
  Rob

  Hi Rob.
  You can concatenate a currency with an empty string "" which translates in the text, but that would give you the currency symbol or 2 decimal places.
  for example = concatenation of & «»

  £1.50 would release 1.5. You can format these rules, but it is annoying if you have had plenty of outings like this.

  text = the concatenation of ' £' & currency & padding

  table of Pseudo-regles
  padding =
  «. 00' if Trunc (currency, 0) = currency
  '0' if Trunc (currency, 1) = currency
  "' otherwise

• [LIKE CS4] separates the sections of a text string

  Hi all

  Sorry for asking such a very basic question, but I can't for the life of me remember how it's done.

  I have three text strings - "big turtle", "big turtle" and "great big huge turtle.

  With the help of a 'space' as the delimiter text point I can easily capture "turtle" a string separated

  How to more easily capture everything until this last space (ie. 'big', 'big', etc.)

  I'm assuming that browsing space delimited text elements is the slow lane

  Thanks a lot for any help

  d.

  The text of point on a space delimiters, then get 'text 1 through the text element - 2 Traoré'.