Hello, I am using windows DVD maker and would like to know thw following: how to add text to the slide show?

Similar Questions

• I use Windows Live Hotmail, and would like to know if I can and how to return to MSN Hotmail?

  I am currently using Windows Live Hotmail.  I would like to know if I can go back to MSN Hotmail, the old version and how to do it?

  MSN Hotmail was dismantled in 2007 and renamed to Windows Live Hotmail.

  Noel

• I tried to burn some pictures with music on a DVD using Windows DVD maker, but others cannot open or run the disc. I tried to use DVD-R and DVD + R, but nothing works. Any suggestions?

  I have created a slideshow with background music using Windows DVD maker on a DVD-R and DVD + R and others cannot open or run the disc. I can't run into a DVD player, but my computer it plays very well. Any suggestions?

  Lol it won't play in my DVD player either. Just the computer.

  =====================================
  This could be a hardware problem with your DVD writer
  but here's something you can try.

  Create your slideshow (photos and music) in the film
  Creator of... and then publish the file to a folder on your hard drive
  walk in the .wmv format.

  Windows Vista
  Getting started
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Then try to use the following free software to burn your DVD:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick...
  Try the following direct link:
  http://tinyurl.com/yzx9sck
  or...
  http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayer

  Save the file to a folder on your hard drive and
  install from there.

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  Good luck.

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  John Inzer - MS - MVP - digital media experience

• I try to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I like it's too big - it is possible to use SP, SLP. ED or when burning on a DVD

  • I am trying to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I thought it's too big – is it possible to use SP, SLP or ED when burning to a DVD problem

  • I am trying to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I thought it's too big – is it possible to use SP, SLP or ED when burning to a DVD problem

  ==========================================
  The following article shows 150 minutes on a single DVD layer, but
  I'd be surprised if it always worked this way. In any case...
  Perhaps you could use a DVD double layer if your burner will handle it.

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Splitting the project between 2 or 3 DVD might be the best option.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Not possible to burn a DVD on the Satellite A100-338 using Windows DVD Maker

  I have a Toshiba Satellite A100. I'm trying to burn a DVD using Microsoft Windows DVD Maker and a Sony DVD - RW. The laptop has a carpet * a DVD-RAM UJ-850 s ATA device.

  When I try to burn a DVD, a progress bar appears and is about 2% before the hanging.

  I also tried to format the DVD first, and which is progressing well before coming up with an error message saying that the drive could not be formatted.

  Anyone got any ideas? Am I missing something completely obvious?

  Hello

  the following things could probably help you with your problem:

  -> control if a new BIOS for your machine and a new FIRMWARE update for your DVD player are available. Update the BIOS and the player firnware
  -> use another applications burning like Nero, CDBurnerXP or other thing that is usually know work well with almost all DVD - RW readers out there
  -> use a DIFFERENT brands of DVD media because the carpet * a readers are really picky

  If all these steps fail, then it is possible that your drive is defective and must be replaced.

  See you soon

• Video playback in the media player in windows (Vista) is perfect. But when I create a dvd in Windows DVD Maker and read the dvd, the sound is off by a fraction of a second on the dvd. Is this a setting problem?

  After burning a dvd, the audio is a fraction of a second offshore on playback of dvd-video.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Check if that helps.

• Windows dvd maker problem: I hear but not image using windows DVD maker.

  I can hear but not image using windows DVD maker. A few obvious reasons? It's strange because it used to work and now a few months later it does not. The image is there in the start menu of the main menu, just before you press play it starts to play sound with no photos after I press play. Please help, steve gratefully.

  original title:
  Windows dvd maker problem

  Maybe the part "What to do if you have questions" of the following
  article would offer some ideas.

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

• Burned DVD using Windows DVD Maker times only once on my Blu - ray player

  Original title: burned dvd

  When I do a cd burned with my windows dvd maker, dvd will play only once on my blu - ray player separated from the TV.  It works fine the first time, but the Player cannot find the disc any time after that.  I use dvd + r discs.  Is there a formatting problem, or do I need to get the dvd + rw discs.  I'm really at a loss.  Thanks for your help guys!

  Hi frapachino21,

  -The problem occurs with all CD/DVD you burn using Windows DVD Maker?

  -After playback of the disc on the Blu - ray drive, the drive is not detected on your desktop/computer laptop with no problems?

  To use certain kinds of CD or DVD discs outside of your computer, you must close the session, which is a process that prepares the disc to be read by other computers and players.

  You can try to close or finalize the CD/DVD and check if it makes a difference.

  Also see the following articles:

  Burn a DVD-video disc

  DVD-video burning: frequently asked questions

  Why my CD or DVD does not work in another drive?

  Disc burning: frequently asked questions

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How can I publish a movie to my computer using Windows DVD Maker?

  I made a movie in Windows DVD Maker, and I would like to save to my computer and send output to my family in an e-mail.

  Hello

  I wish to inform you that if you want to publish a movie that you should have Windows Live Movie Maker in Windows 7.

  Windows 7 does not have Movie Maker, you must download and install Windows Live Director.

  You can download the movie from the link:

  Movie Maker

  http://Windows.Microsoft.com/en-in/Windows7/products/features/Movie-Maker

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Burned using Windows DVD maker photos are blurred when read

  Pictures inserted in creation of DVD of Windows7 and burned to a DVD disc are dimmed when read on television via a DVD or Power DVD on the PC drive (origonal photos are sharp)

  No problem with ULEAD DVD Movie Factory

  Hi Barry Robbo.

  1 when was the last time you were able to play a DVD burned successfully?

  2. did you of recent changes on the computer?

  3. What is the file format of the burned photos?

  4. which Windows Player do you use to play the burned photos?

  A DVD may not play properly in some DVD players or DVD - ROM readers to one of the following reasons:

  • The type of drive may not be compatible. Some DVD players or DVD - ROM drives can play some types of DVD. For example, some DVD players only play discs DVD + R or DVD + RW, while others play only DVD-R or DVD - RW discs.
  • The quality of the disc may be too low. Some DVD players or DVD - ROM drives will not play DVD if the disc is not in good condition or if it isn't a high quality disc. If your Player cannot play a DVD, you can try to burn again using a higher quality DVD.
  • DVD decoding software can not be installed on the computer. If you try to play the DVD in the DVD drive on another computer, the DVD will not play if DVD decoding software is not installed on this computer.

  To determine what types of DVDs your DVD player or DVD - ROM drive can play, see the documentation that came with your device or go to the manufacturer's Web site.

  Solve problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Method 1

  First of all, I suggest that you try to view the pictures burned using the Windows Photo Viewer.

  1. open the photo library by clicking the Start button, click photos.

  2. in the photo library, open the folder that contains the picture that you want to view and then click on the image.

  3. on the toolbar, click the arrow next to Preview, and then Windows Photo Viewer.

  View and use your pictures in Windows Photo Viewer

  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer

  Method 2

  If you are facing a similar problem in sight the pictures burned in Windows Photo Viewer, then uninstall any ligthscribe third-party burning software installed on the computer and then try to view.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get the clips in record full-time instead of the 25seconds (which seems to be set) when using windows DVD maker

  How can I get the clips in record full-time instead of 25 seconds (that they seem to be defined) using windows DVD maker

  Hi LorraineDawson,

  Here's a walkthough troubleshooting on this issue:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  hope this helps

  B Eddie

• Hello, I would like to know if it is possible or there is the possibility to choose the path in the preferences to save backups of ios through itunes for windows pc devices. Thank all participants in advance of the availability, I offer cordi

  Hello

  I would like to know if it is possible or there is the possibility to choose the path in the preferences to save backups of ios through itunes for windows pc devices.

  Thank all participants in advance of the availability, I offer cordial greetings.

  Post edited by: andreava

  No preference, but there is a solution. See moving backup iOS device. See the rest of the tip of the user to do a split cell library if the library files and the media folder are on different drives.

  TT2

• Upgrade to Windows 7 and would like to know if all my tablet/pen functions still work?

  Original title: Windows7 and Tablet PC

  I have a Gateway Tablet PC.  He who is like a laptop, not these new without a keyboard.  For some reason, she has two model numbers: TA1.0 and M280E.  At the moment it has Windows XP (gateway) Tablet PC edition 2005 Version 2002 Service Pack 3 on it.  It has a processor Intel Pentium M 1.73GHz, 1,999 GB of RAM or processor if you look in the BIOS, 2048 MB of RAM.  I think it's the RAM Max will take this particular PC.  The processor is scalable?  I know that I have contributed to a maximum of one of my doors from the other monitor has collapsed on me one day and is unusable, so I think this is one.  The ugly manual, I downloaded did not about the Max RAM, a Fujitsu 37.2 GB HD and a CD - RW Optiarc.

  Because Windows XP is longer supported, no. updates (although I find it odd that a pop-up saying updates are ready for your computer is fun) and for some reason it will run is more than some previous programs I ran over it, such as MSE and Windows Media Player 11, and I don't know I'll find others.

  The important question is: I want to upgrade to Windows 7 and would like to know if all my tablet/pen functions still work, since it's the main reason I want to use?  And of course running WinXP is a safety hazard as well.

  I use my ASUS X54C now and you want to reset to factory settings and reformat the HD, so I want a computer to use while I'm this, as well as using his pen to create a clip art image and also many other things.  Is there anything else I should know?

  The first thing to do is to check the support web site of the gateway to see if there are drivers for devices on Windows 7 for your model. If there is no record of specific device in Windows 7 listed then you will not be able to run Windows 7 correctly, or it may not work at all.

  Gateway driver support web site: http://us.gateway.com/gw/en/US/content/drivers-downloads

  Note: There is an "Auto Detect" option that can help you determine the right model you have.

  M280 using as a guide I tried to see what is available and found only XP / Vista and Windows 2000 drivers, so you may be out of luck, but try to auto detect and see if you have Windows 7 drivers listed.

  J W Stuart: http://www.pagestart.com

• I want to keep my Adobe Creative Suite 5.5 and would like to know if there are problems with update to Windows 10?

  I want to keep my Creative Suite 5.5 and would like to know if there are problems installing Windows 10?

  May work, may not... but will NOT be updated by Adobe to work on Win10

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or to run it as Administrator http://forums.adobe.com/thread/969395 to assign permissions FULL said... yet, but it is sometimes necessary for Adobe programs

• I run on a Mac CS6.  I need to change the operating system and would like to know if I can still install the software

  I run on a Mac CS6.  I need to change the operating system and would like to know if I can still install the software.  I upgraded to OS X 7 (Lion) for OS X 10 (Coyote), but my devices would not work.  I'm changing to OS X 7 (Lion), but this will eliminate my entire hard drive.  My CS6 software install?  I bought CS5 and CS6 improved.  I don't want to go on the CCif I don't have to.  Thank you!!!

  as long as you have your serial numbers and installation cs6 files, you should be ok.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".