Helmet n left times

Similar Questions

• I want to activate the outputs audio multiples to be active, so I don't have to wear my helmet all the time, or need to disconnect anything to the speakers.

  Pretty simple question really. I want to activate the outputs audio multiples to be active, so I don't have to wear my helmet all the time, or need to disconnect anything to the speakers. I checked the 'sound' thing in the Control Panel, but the enable option is not letting actually work. So if I want friends to hear my video games or something else, I turn on my speakers and they can hear it now.

  Thank you.
  Windows 7, 64 bit.

  Audio original tittle: multiple

  Windows does not support this. This is handled by the device drivers or hardware - if they don't support the outputs multiple, you can try the search for an alternative solution.

• Sound comes only the hollow helmet on Satellite A200

  Hello
  recently, I used the headset on my laptop for the first time and after that the speakers no longer working, the sound is routed through the helmet all the time, even if the realtek software correctly tells whether or not the headphones are connected.

  In addition, noise in the headphones is very poor quality, there is an instant buzz and noise level can be saturated very easy.
  Y at - it a hope that there is a software problem, or do I have to contact Toshiba?

  Hi mate,

  the troubleshooting procedure is as follows:

  -set all the default BIOS settings
  -remove recently installed software that could cause such an error
  -Download the audio driver, remove the old driver and reinstall the audio driver with the downloaded version
  -shouldn´t This helps then recover your machine (backup of your important data first)

  The last resort would be to contact a local authorized toshiba service partner and ask them for help. :)

  If you need a link to find the one closest to the check the following link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them

• Problem of time Code (photo)

  I'm shooting with a Panasonic GH4, and I time codes activated. When I import the clip in the first it correctly displays images max length, in this case 18 seconds as you can see on the right. However, on the left hand side is displayed 1:47:56:04 that is how much I have left time record based on SD cards as I think.

  How can I get every clip to start at 00?  For example, for this clip, I would start time to be 00:00:00:00 and ends at 00:00:18:00

  

  The number on the right shows the In - Out duration of the clip (if there is no In - Out marks, then display the total duration of the clip), the number on the left shows the timecode recorded by the camera during the filming of the clip.

  MtD

• The sound in my apps does not work unless my headphones are plugged in, how to fix this?

  The overall sound does not work in any of my apps unless earphones are connected. All other sound works and I checked the individual applications to ensure that the sound is turned on and he says he is.

  Try this...

  Close all open applications... Sign in your account... Perform a reset... Try again...

  Reset ( No Data will be lost)

  Press and hold the sleep/wake button and the Home button at the same time...

  Wait for the Apple logo to appear...

  Usually takes about 15-20 seconds... ( But may take longer...)

  Release the buttons...

  If no joy... Try to plug and unplug the helmet a few times... Be nice...

• Second screen with HDMI audio source after connection or wake

  It is a very minor issue, but one I still dealing with.

  I have a BenQ RL2455M monitor connected to my MacBook Pro w / retina with HDMI. I plug headphones to listen to music and talk on Skype on the plug headphones of the MBP. It all works perfectly.

  The question arises when first connecting my laptop to the monitor (plugged the HDMI cable) or when waking up the laptop from sleep. If my helmet was left plugged in the headphone during this process, so I have no sound. Sound is sent through the HDMI. I have to unplug and plug in the headset to steal her back.

  Of course, El Capitan is the choice the newest device to use for output. It makes sense, when you first connect the HDMI, but less after sleep.

  In addition, this occurs when only my screen is in sleep mode and not my "computer". I changed this setting to 3 hours, because I had some programs that are not keep the laptop awake.

  Hi, kaliblack.

  Please visit Apple support communities.

  I understand that you have an audio problem with your MacBook Pro.  Let's start with a memory NVRAM reset and then do a test to see if the behavior persists.

  How to reset the NVRAM on your Mac.

  See you soon

• My iPhone think that my headphones are plugged when they are not if will not play music or alerts through the speakers. What should I do?

  My iPhone randomly started thinking my headphones are plugged when they are not. As a result, it won't play music or message/call alert through the speakers. What should I do?

  Try to push the helmet a few times to move the switch. If not, then please post something here and I'll be happy to help you further.

  AppleMan

• Will not pump light customer image D90D7 using WDM 5.0

  I'm trying to shoot a picture of one of my thin clients in D90D7 that I updated the image of the most recent (Windows Embedded standard 7), the most recent version of HAgent (6.3.2.54) and installed a few applications that will use all users.  I'm in WDM 5.0, do a right click on the device in Device Manager, select Get Image device, give a name to the image, check the box under Image Merlin Options to shoot and the option button not PXE under Option imagery (neither that neither PXE worked, I tried both), click Next, then finish.  I can see the demand package in the Update Manager, and he left time 'Now' to 'Boot' after a reboot of the machine.  It then starts in the image upload screen Pre-os as it should.  Problem is the download of the OS (which begins by) not going nowhere.  The status bar is located at 0% until the end of a few minutes, I get the following message:

  BusyBox v1.00 (2007.02.08 - 11:26 + 0000) built-in shell (ash)

  Enter 'help' for a list of built-in commands.

  / bin/sh: can't access TTY; disabled job control

  / bin #.

  Does that mean something to someone?  I tried this 3 times and never further...

  Batman - I've seen this behavior intermittently on the old bootagent factory and upgrading to the latest 3.1.9 bootagent resolves the behavior.  I posted in your other thread associated with this deployment.  You use the last picture - but they release pictures of the manufacturing base in the same cycle of release management tools.  As for your security updates noted - there are updates to management for WDM Mgmt., non - pxe Imaging agents and the Agent of WCM.

  Apply the WDM 3 patches out for 5 WCM (MR1, MR2, and MR1.1).  This will upgrade the HAgent and included BootAgent packages that you need to deploy.  Once the BA is reclassified to 3.1.9 you should be able to do the test by pulling and pushing your custom images.

  k

• (Redirected) Very poor customer service and fake offers.

  It has been too many days I get an apology from Dell on college offer promotions, seems almost more a month ended I paid Rs. 1299 nothing was received from it. A very unsatisfactory experience and too much apology has been given to me, I have not received the Levi all and any voucher helmet yet, every time I call at the number below mentioned tells me that it will be in this week or 5 days blah blah. Give me a final answer so that then I can think of for the final decision.

  Thanks for the awsome business and wonderful customer service

  Hi pateljay.suresh,

  Please repost this in the forum for more quick help customer care.

  http://en.community.Dell.com/support-forums/customercare/

• LifeChat LX-3000 sound quality is terrible on Windows 7

  I use this headset LifeChat LX 3000 for a few years now, and they were flawless until I upgraded to Windows 7. I did all the obvious things as updated my drivers and sound cards, and the headset is my default device for recording and playback. Yet for some reason any there is a noise of cracking/static terrible and constant in the background when the helmet is not cut. I thought that this could be due to the headset within a few years, I went to Best Buy and purchased a whole new game. Yet, with the new headphones, the sound quality is just as bad. I have really no idea what could cause cracking and the static, so any suggestions would be appreciated.

  Note: I have uninstalled/reinstalled the helmet a few times, which did not help.

  Hi, Nicholas K,.

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en/w7music/thread/1dc68875-9022-47bd-aad1-cf9b5ac449e9

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• After upgrade blackBerry smartphones - can not use headphones! Only the speaker!

  After the upgrade to the new operating system, I can't use the headset.   I hear nothing and no one can hear me speak.  When I change to speaker that works - but who wants to go through life with everyone heard your calls!

  This phone is essential for businesses and I am very frustrated - thought the new upgrade, it would be better, but it made it worse.

  Can someone help me please? !!!

  It happened to a number of us.  It takes some futzing with it to return to normal.  You have the headphones supplied with the phone?  Headphones or, for that matter?  If so, try connecting and then doing a battery pull.  With the connected headset and the device on, remove the battery, wait a few seconds, then replace the battery and wait for the device to reboot.  Others have lived the media player and selected a song to play.  While the song is played, insert the headset, then click on the BlackBerry Menu button (the button with seven points next to the green button ' phone'), click Activate combined and see what happens.  You will have to perhaps to plug and unplug the helmet a few times to 'train' the phone again.  Finally got mine back to normal and it worked fine since.  Seems you just need a "jump start" with the activation of the handset to the headset.

  I hope this helps!

• Headphone port Broken, seek to use the MIC for the sound port

  Hey,.

  I have a laptop of 640 m Ispiron with Windows xp.

  I'm sure that the helmet is broken, anyone know how to get the audio output for headphones microphone Port?

  Is it possible to pass the customs of the ports?

  I use the SigmaTel card, I don't know the model.

  I was looking through the forums and I found this:

  http://dellcommunity.com/supportforums/board/message?board.ID=insp_audio&message.ID=29912

  I gave it a try but it wasn't what I wanted, either he did not because I cannot hear anything through my mic port yet.

  Also I can not all the sounds down my laptop speakers, I'm sure its because audio is stuck on the helmet, I tried to push the helmet a few times it triggers to speakers, but this is a no go!

  I know the speakers work because I could hear the sound when I did the thing Dell Diagnostics.

  Message edited by Kablamtron on 05/22/2008 10:49
  
  

• Delay of paint

  Hello
  
  I want a label to paint with breaks. To get an impression,
  Run the code as it is. The current paint is made in the doPaint (...) - method.
  Currently, I spend the graphics Control Panel, which is not what I want, but at least
  We see some output. The issue of this "demo" - code is: why isn't the number "1".
  output?
  
  What I tried initially is to pass the graphics of the label - end several
  labels will be added to the Board - but then nothing is painted at all.
  
  Write own class which extends from JLabel was impossible either.
  
  So why is (partially) out visible when the graph of the group went and
  Why not when it's the graphics of the label?
  And the overall approach is valid or simply has everything to be painted on a Panel?
  
  Java version is 1.6.0_24.
  

  import java.awt.*;
  import java.awt.geom.*;
  import javax.swing.*;
  
  public class DelayedPaint {
    JFrame frame;
    JPanel panel;
    JLabel lb;
  
  
    public static void main(String args[]) {
      EventQueue.invokeLater(new Runnable() {
        public void run() {
       new DelayedPaint().createAndShowGUI();
        }
      });
    }
  
  
    void createAndShowGUI() {
      frame= new JFrame("DelayedPaint");
      frame.setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
      frame.setSize(400,400);
      panel= new JPanel(new BorderLayout());
      frame.setContentPane(panel);
      frame.setVisible(true);
      Thread t = new Thread() {
        public void run() {
       draw(panel);
        }
      };
      t.start();
    }
  
  
    private void delay(int ms) {
      try {
        Thread.sleep(ms);
      }
      catch (InterruptedException e) {
        System.out.println ("Error in delay: "+ e.toString());
      }
    }
  
  
    public void doPaint(Graphics g) {
      Graphics2D g2 = (Graphics2D) g;
  // Uncomment the following code to draw an arc. The arc will not be drawn, but cipher '1' appears.
  /*
      Dimension dim= frame.getSize();
      g2.draw(new Arc2D.Double(50,25, dim.height-100, dim.width-100, 0,360,
                      Arc2D.OPEN));
      delay(1000);
  */
      g2.setFont(new Font("Dialog", Font.BOLD, 15));
      for (char c='1'; c<':'; c++) {
        g2.drawString(""+c, (c-48)*10, 50);
        delay(500);
  //      lb.revalidate();
  //      lb.repaint();
      }
    }
  
  
    private void draw(JPanel panel) {
      lb= new JLabel("Good morning", SwingConstants.CENTER);
      Dimension dim= frame.getSize();
      lb.setPreferredSize(new Dimension(dim.width, 80));
      panel.add(lb, BorderLayout.NORTH);
  //    delay(2000);
  
      lb= new JLabel();
      lb.setPreferredSize(new Dimension(dim.height-20, dim.height-20));
      panel.add(lb, BorderLayout.CENTER);
  //    doPaint(lb.getGraphics());
      doPaint(panel.getGraphics());
  /*
      lb= new MyLabel();
      panel.add(lb, BorderLayout.CENTER);
  */
  //    lb.revalidate();
  //    lb.repaint();
    }
  
  
  
  /*
    class MyLabel extends JLabel {
      public void paintComponent(final Graphics g) {
        super.paintComponent(g);
        Graphics2D g2 = (Graphics2D) g;
        g2.setFont(new Font("Dialog", Font.BOLD, 15));
        for (char c='1'; c<':'; c++) {
       g2.drawString(""+c, (c-48)*10, 50);
  //     delay(500); // blocks EDT
        }
      }
    }
  */
  
  }

  //frame.setVisible(true);
  panel.add(new NorthPanel(), BorderLayout.NORTH);
  panel.add(new CenterPanel(), BorderLayout.CENTER);
  frame.setVisible(true);
  

  Components should be included in the frame until the frame is made visible or packaged.

  But I need to paint the component only once

  You can use the setRepeats() method. If you want the timer to take a fixed number of times, then you need to Manager within the class ActionListener to the timer itself (which is what you do in the central panel).

  The paintComponent() method is used to paint the current state of a component. It should NOT be used for:

  (a) definition of the properties of a component
  (b) starting or using timers.

  For your panel North there is no need a custom painting. The code might look like:

  import java.awt.*;
  import java.awt.event.*;
  import java.awt.geom.*;
  import javax.swing.*;
  
  public class DelayedPaint {
       JFrame frame;
       JPanel panel;
  
       public static void main(String args[]) {
            EventQueue.invokeLater(new Runnable() {
                 public void run() {
                      new DelayedPaint().createAndShowGUI();
                 }
            });
       }
  
       void createAndShowGUI() {
            frame= new JFrame("Delayed Paint");
            frame.setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
            frame.setSize(400,400);
            panel= new JPanel(new BorderLayout());
            frame.setContentPane(panel);
            NorthPanel north = new NorthPanel();
            panel.add(north, BorderLayout.NORTH);
            frame.setVisible(true);
            north.startTimer();
       }
  
       class NorthPanel extends JPanel
       {
            JLabel lb;
            Timer timer;
  
            public NorthPanel() {
                 lb= new JLabel("Good morning");
                 add(lb);
            }
  
            public void startTimer()
            {
                 ActionListener taskPerformer = new ActionListener()
                 {
                      public void actionPerformed(ActionEvent evt)
                      {
                           setLayout(new FlowLayout(FlowLayout.LEFT));
                           lb.setText("Left");
                           timer.stop();
                      }
                 };
  
                 timer= new Timer(2000, taskPerformer);
                 timer.setRepeats( false );
                 timer.start();
            }
       }
  }
  

  For the central panel, you also need to add methods to modify the text. If you add a method like setText(). Then, the code base into your timer would be:

  centerPanel.setText(...);
  centerPanel.repaint();
  

  The timer class will need to track the number of times wherever he shot then he'll know what text to set. The paintComponent() method is simple because there is no inovke your getText() method and then draw the text to the location of your choice.

• Helmet whistle after only 4 time under assistance

  Hello to everyone

  I own a Macbook Pro 17 "[start 2011]. OS X Yosemite 10.10.5

  Forgive me for the long description, but it seems that one problem has evolved into several ones and I, on my own, can not find a solution.

  On 24 February 2016, I took my computer to the title of the assistance that the battery ended of his life and had to be replaced. The hull unibody 17 "this operation cannot be performed at home as the Mac must be 'open '. For the first time, I thought to buy a battery online and replace it on my own, but to avoid "risks", I decided to take the title of assistance.

  The same day they gave me back my computer, but after a few days, the logic board failed due to a "congenital". I picked up my computer a second time and they kept there for a week to replace the logic board. Fortunately, this situation is covered by the s in warranty program that apple found that almost all the Macbook pro early 2011 had the same defects.

  Before making my computer the Apple store called telling me I could perceive the Mac, and that, because of the replaced logic edge start has a sort of a 'pause' [you see the loading bar then everything disappears and then you see it appear again]. The genius bar, I noticed that this was accompanied by a very slow start-up-in [clock] in hand, I counted three minutes.

  Struggling to help again once they told me as would have checked my computer, and during a call in the end they asked if it was possible to format as it counted by the operating system settings always "calibrated" on the old logic board.

  After the problem of formatting, reduced a bit, even if the start is still slower than before.

  I'm back from my computer, but once I used it in an environment quite I noticed that the left speaker was a whistle every time a sound that's happened. The hiss remained for 30 seconds and then disappeared. The whistling was audible, even if the volume has been completely turned off and does not appear if the headphones are connected [no hiss were audible on headphones].

  Took my computer under support the fourth time they replaced the left speaker and they said that they replaced the logic board [yet].

  I picked up my Mac and the problem seemed missing.

  So finally, we come to today, I was using my computer with headphones and I started to hear the hiss even, but this time just while I was with the helmet.

  I checked online if other people had the same problem and it seems that most of them proposed to take in respect of assistance.

  My question is: what should I do? I read on several that associated Mac forums that Apple products are "programmed" at the break after a certain period of time, if visitors are "forced" to buy a new product. My computer worked fine until I had to replace my battery, and it's the computer 17 "laptop last produced by Apple. I honestly don't know what do now that taken under help, seems it a mockery because I am sure that after replacing again thing speakers eject [maybe next time the monitor will begin to blink or light under the keyboard will fail]. I think about buying a new computer, but in all honesty, how can I trust Apple now?

  By the way I want my computer back as it was before the replacement of the battery.

  4 times in respect of aid for almost a week in less than three months is certainly unacceptable for a company like Apple like all that I heard 'experts' of the genius bar was "what you have in your hand is not only a computer, but advanced technology, etc etc..." but in the end all this "expertise" is not my problems but actually created new.

  This hissing must depend on the battery? The logic board? A faulty speaker? Another element broke during the repair? A software problem?

  This problem becomes worse and spoil the other parts of my computer?

  Forgive me for the inadequate number of questions but the problems that I encountered during the 2 months never seems to come to an end and I really hope that the community will be more useful than the genius bar, where I felt treated like a number, with the audience of store who tried to solve the problem in the minimum possible time without even listening to the end What is the problem and how I got there.

  Apologies again for the long explanation, but maybe the real problem is hidden behind something that has been neglected, and I want to make sure that nothing has been forgotten.

  Thank you in advance for the help you will surely be able to give me

  All the best

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT2040

  If no success, make an appointment in an Apple store genius bar.  Apple repairs have a 90 day warranty.

  Ciao.

• For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left. Tried to 'fix this folder' and lost ALL

  For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left.

  Tried to 'fix this folder' and ALL - lost ALL the Inbox.

  The file is still there and works well...

  How can I stop it and what are the causes?

  Thank you all, Gabe

  If you have the file somewhere on your hard drive, export and import tools it will be important back to Thunderbird.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  Instructions http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html