HELP 0X0000007E

Similar Questions

• Help please: error 0x0000007e Stop when starting up on top of Satellite P30 110

  Hello

  I wonder if someone can please help me with a recurring error message I get randomly when starting up. I have a satellite P30-110, with WXP Home SP2 installed. Mobile P4 3.2Ghz processor, 512 RAM, ATI mobility Radeon 9600/9700 series.

  Turns off the computer as usual last night. He walks this morning and think that it load the bios OK and then got the black background with Win XP, and then think about this error page came. Has a blue background with the following text:

  "A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

  Technical information:

  "STOP: 0X0000007E (0XC0000005, 0X00000000, 0XF891D384, 0XF891D080).

  I turned the computer off, then restarted when prompted chose to start windows normally, and it seems to start up fine.

  Any ideas?
  Thanks for your help.

  Hello

  If this is the first time, you've seen this error, I'm not too concerned about it. There are not too many people who have not encountered this scenario occasionally.

  The time to worry, if it happens regularly, as this may indicate a component defective that will need to be diagnosed later.

  On this occasion, I suspect that the start process has detected an anomaly any (possibly a play on hard drive control) and rather than allow Windows to continue it stopped with the error on blue screen.

  Kind regards

• Error while installing windows Xp on my E Aspire 13 ES1-311-C4VK. Error is STOP: 0x0000007E.urgent pls help

  I tried so many times to install windows xp on my Aspire E 13 ES1 boot cd - 311 - C4VK.Xp first, then load something. After that, it shows the error:

  STOP: 0X0000007E (0XC0000005, 0XF73B9D66, 0XF78D9EA0, 0XF78D9BC)

  ACPI.sys - address F73B9D66 base at F73AE000, DateStamp 480252 b 1.

  I need urgent help.

  And another thing, I want that it is not possible to change the sata ACHI to ide mode. Isn't it possible to change?

  Why windows XP?

  It is not longer supported by Microsoft and other SOFTWARE, and it is the best OS to have viruses, rootkits and other infections.

  you will be also problems of drivers/hardware as acpi.sys

  If you need windows XP for some old software, try to use a virtual machine or buy a second hand laptop.

• Help to remove the Blue error screen: 0x0000007e

  Original title; Blue screen - please help

  I'm playing a game recently on windows xp. I keep blue screening after that I tried to load the game. I discovered that what initially is that the user-mode driver framework is a failure. I don't know what it means anyway. my error code is 0x0000007e. Thank you

  Hi, BradMJ,

  How to troubleshoot a Stop error 0x0000007E in Windows XP

  http://support.Microsoft.com/kb/330182

  The Windows User Mode Driver Framework (Wdfmgr.exe) service appears in the Windows Task Manager after you install Windows Media Player 10

  Note The Windows User Mode Driver Framework service is a driver component that is used by Windows Media Player 10. The Windows User Mode Driver Framework service supports synchronization of content with hardware players. For example, an MP3 device is a hardware player.

  http://support.Microsoft.com/kb/892552

  How to remove the Microsoft user-mode driver framework

  http://www.ehow.com/how_5175769_remove-Microsoft-usermode-driver-framework.html

• Stop error 0x0000007e help wanted

  Stop error 0x0000007e help wanted
  Hi ive got this stop error message and don't know how to fix it.

  Ive got a laptop packard bell easynote L4 series. Windows xp service pack 3 on it.

  Windows loads up then restarts to the login page. Ive pressed F8 and disabled auto reboot system fail and get a blue screen with this error message.

  STOP: 0X0000007E (0XC0000005, 0X838B6922, 0XF790B7A8, 0XF90B4A4)

  I can't record in normal mode or windows and nothing happens when you select last good load option restore in F8.

  I can't pretend I do not know how to enter back on win XP chkdisk.

  can someone help please!

  Hi JasonDavies,
   
  Try the methods that are listed in the article given below to resolve this issue:

  How to troubleshoot a Stop error 0x0000007E in Windows XP

• Blue screen of death * STOP: 0x0000007E Please help

  A problem has been detected and windows has shut down to prevent damage to your computer.  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: make sure that you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.  Technical information: * STOP: 0x0000007E

  the only defense I have for her is fire threat.
  My windows XPS 400 computer was needing an update and I repeated restart later then I did go to sleep and when I tried to log on that came to the top.

  The figures I got were

  STOP: 0X000007E (0 X 80537008, 0XB84C33B8, 0X000001D, 0XB84C30B4)

  It won't let me connect to one of the modes.
   
  If you need more information ask.
   
  Help is very appreciated.

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• 0x0000007E (0xc0000005 0x806a0c04 0x803995ec 0x803992e8) error messages on a blue screen... Please help, 3 days of problems

  I'm not a computer expert, so please exscuse me, 3 days ago, the computer kept freezing, I am running a packard bell intel celeron with windows vista, I have norton anti virus so I don't think my problem is the apparent virus, first Frost was intermittent but after an hour or two , all froze and wouldn't respond, I disconnected the power and he started upward, repair of windows says something along the lines of stacking and told me I had to check my drivers, I rebooted and was able to get back on but after a few minutes it kept freezing up again I went through the process and finally managed to put online, a message popped up on my screen telling me to update vista to service pack 2, I did, the computer seems to work very well so I thought that the problem has been resolved, yesterday when I turned on the same thing happened, yet once I went through the process and finally got the computer to work after several attempts , it would start up then restart itself or sometimes the screen would be just black and nothing would happen, the computer would be buzz but anything in life. yesterday after finally getting to turn on another message came up saying there are 31 important updates for vista, I downloaded once again of course it seremed work very well and I thought it was fixed, but unfortunately not yet today the same thing happens when I arrived to start the computer I decided to write the blue screen messages that include

  0x0000007E (0xc0000005 0x806a0c04 0x803995ec 0x803992e8) acpi.sys - address 806A0C04 base at 80 68 B000
  After that a long stay him to start it in safe mode, which took 2 hours is the same in safe mode, just frozen, I tried again and got to work in safe mode and it froze again and finally I managed to get to the top and works normally, I really have no idea what is wrong or how to fix it I managed to save important things like the photos that I have the impression that he wants to die, I even tried the system restore which is nothing because when it updated 2 days ago, it wipe all old restore points and so I absoloutley no way to restore to a point before he decides to drop , I have not downloaded new software in the last months have so no idea what could the cause of the problem, please help, and remember that while I can work around the basics I'm not an expert so please try to keep it simple :)

  0x7E bug check code
  http://msdn.Microsoft.com/en-us/library/ff559239 (v = VS. 85) .aspx

  Norton could be part of the problem but leave that for now.

  The amount of RAM is installed? Have you recently made any cham = nges?

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• Error 0x0000007E Stop etc. Help, please

  Hello

  My computer came with a problem in the case where each time I get an error Stop: 0x0000007E (0xC0000005, 0x82B2B443, 0x8B7C38C8, 0x8B7C35C4). I don't know what caused it but I started noticing it when I received an update of graphs through the update of Windows. I've updated, but just as he was about to finish my computer froze and shut. Initially, the computer would turn off a continuous long beep on start up and not actually start up. When I could go beyond it times everything worked fine except for my Defragmenter, which for some reason even if I leave it's going 2 days right it will not end. I also ran AVG and Combofix (separately) to see if it was a virus and although I got some viruses at the point where I do not think that this is the cause because I can not find. About 3 weeks after it started the beep long continuous has been replaced with the Stop error. My thought is that there is something wrong internally or Combofix has deleted some registry files important without me being aware. Could someone provide me with what they think happened here, what was the cause and a way to resolve this would be nice. See you soon

  Hello

  This long beep is a hardware error and you need help from a real computer store (no leeks
  and displays a Best Buy or other stores) or system manufacturer support.

  Not much point in trying to make other troubleshooting because it is the main issue and the same
  root cause of the 7th Bug_Check which is usually hardware.

  I hope this helps.

• Instant BSOD on startup mode even safe - need help

  Hi well it hade to get to my laptop does not start and was working fine last night all the I get a message from chesy "We apologize for the inconvenience, but Windows did not start...". »

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Last known good configuration

  I tried all the options and not start Windows even safe mode all I get are some instant loading files then blue screen and reboot (too fast to read).
  Pressing F8 gives me more options:

  Enable Boot logging
  Enable VGA mode
  Last known good configuration
  The Directory Services Restore mode (your most recent...)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to the operating system choices Menu.

  Help? What am I, I guess that anyone do?

  (edit)

  I disabled the restart on system failure, I get the following message:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  IF this is the first time your saw this screen, retart your computer stop error message.
  .....
  Technical information:

  STOP: 0X0000007E (0XC0000005, 0X3F3F3F3F,...)

  any ideas?

  My laptop is the Equium A60 - 181

  Richard S.

  Hello redhawk

  Have you ever tried to use the System Restore tool to restore your device to an earlier time?

• KB9711486 blue screen causing 0x0000007e

  KB9711486 part of the recent automatic updates last Friday (10/16).  XP SP3, INTEL processor.   After the reboot, get a blue screen with the following error message when windows tries to start.
  0x0000007E (0x805c49b8, 0xf7a602b4, 0 x 8000003, 0xf7a5ffb0).  Also impossible to revert to last good configuration.  Get the error "PAGE_FAULT_IN_NONPAGED_AREA).  Requires external to go back to the last good configuration rescue disk.    Given that Microsoft was pressed so many updates (hotfixes about 11 last Friday... and I run autmatic update), it took trial and error to find patch that was causing the problem.  Ignoring this patch at the moment. Lost most of the weekend recovering in activity. Thank you very much.

  Incidentally, now that the PC is working again, getting another error during the operation:
  DSCA.exe - routing of common language of the debugger service Process ID 0x8d4 Thread id (2260) = 0x8d8 (2264).  Anyone idea what all this on and how do I get rid of him?

  I found this and it worked.

  1 boot from your Windows XP or DVD CD and start the recovery console (see this Microsoft Help article at this stage)

  2. type this command: CHDIR $NtUninstallKB971486$ \spuninst

  3. type this command: BATCH spuninst.txt

  4. type this command: exit

• BSOD please help

  Hi, I keep on getting the Bsod I want to play this game called soldier front of ijji. I get on this stop error message and I don't know what to do. I tried to rebot my computer still dosent work here is a stop error message.
  Stop: 0X0000007E (0XC0000005, 0X81C01674, 0X8A05DBB0, 0X8A05D8AC)

  Help, please
  Thank you

  I found the solution to my question. I just downloaded the sp1 offered on this post and went on the safe mode and installed. Now, it works fine. I tried to find if the tool of readilness systems has been installed, but I cound not be sentenced to a fine any trace of him, so I think that the solution is to install on a safe mode.

  PPL thanks for your help.

• "A problem has been detected and Windows has shut down to prevent damage to your computer"... * STOP: 0x0000007e (0x805c49b8, 0xf7a172b4, 0 x 80000003, 0xf7a16fb0)... blue screen

  Hello!

  For the life of me I can't figure out how to get my machine to boot successfully. Nothing changes when I choose Safe Mode, last known good Configuration, enable VGA Mode, booting, Directory Services Restore Mode or Debug Mode logging.

  It's very stressful, because I'm right smack dab in the Middle a semester at the College. I have most of what I currently need access to supported illuminates... but not quite all :( It is also very reassuring to be able to take care of the school of work away from the library of the University. Yesterday, my computer was working fine... I think that Windows has completed an update, if I can't remember now. As I woke up this morning, I was not able to boot all the way to Windows only once.

  My laptop is a HP Pavilion dv6000 running XP Media Center, and I have not installed new hardware since I bought the machine about 3 years ago.

  Here are more details, where they can help in the diagnosis of my problem:

  • ID of the system board: 30BB
  • Type of processor: Genuine Intel(r) CPU T2250
  • Processor speed: 1730 MHz
  • Total memory: 1024 MB
  • Video memory up to: 128 MB
  • BIOS version: F.06

  Here's the entire message to the blue screen:
  - - - - - - - - - - - - - - - - - - - -
  A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.

  Technical information:

  STOP: 0X0000007E (0X805C49B8, 0XF7A172B4, 0 X 80000003, 0XF7A16FB0)
  - - - - - - - - - - - - - - - - - - - -

  I also learned to a blue screen that says something about "PAGE_FAULT_IN_NONPAGED_AREA". I think that this happens when I try to start safe mode.

  Also, I never did much with computer problems beyond what could be repaired with the restoration of the system... so not being is not able to boot at all me has to stop. Please, I beg you! Help me?!

  With great appreciation for your time,.
  Damaya

  Quick suggestion

  Some HP partition the hard drive. have you tried to type F11 or F12 during startup (before that he go to the option mode start screen)? It might take you for a HP recovery program in that partition (because windows don't be loading not to use that recovery)
  Good luck

• Stop: 0x0000007e (0xc000001d, 0 x 80537008, 0xba4c33b8, 0xba4c30b4)

  I received the following during startup error message:

  A problem has been detected and windows has been closed seeded to avoid damage to your computer

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again, follow these steps:

  Make sure you have enough disk space...

  Check with the hardware vendor for updates to the BIOS...

  Technical information:

  STOP: 0X0000007E (0XC000001D, 0 X 80537008, 0XBA4C33B8, 0XBA4C30B4)

  Help, please!

  Uninstall KB977165

  I deleted KB977165 as follows.

  Started by using BartsPECD or use your recovery CD

  Change directory to c:\windows\$ntuninstallkb977165$\spuninst

  Copy the file spuninst.txt spuninst.cmd

  Run the file spuninst.cmd

  He will be back on the change.

  I've been very successful with that.

• Error 0X0000007E Stop after installing the new card mother and CPU.

  Original title: Stop error after installing the new card mother and CPU.

  After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

  If you have made the change without having to reinstall XP, you will be taking and Pray H@ll. the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

  I hope this helps.