Help! Armageddon! -My Xbox 360 does not turn on

Similar Questions

• Spectrum X 360: New spectrum X 360 does not turn the screen into tablet mode

  My spectrum is only two weeks old and works wonderfully as a standard notebook computer.

  However, I cannot get screen to turn when I select tablet mode or Flip on the stand of entertainment.

  All the research online, I can find are people who used Win 8.1 and is updated to Win 10.

  Mine came with Win 10 pre-installed.

  None of the screens settings they advise to go to exist.

  I also checked the registry and its game properly.

  Windows 10 made the anniversary update a few days in me starts to use it so I don't know WHETHER or not the rotation number was there from the beginning.

  I solved my problem re. the screen does not turn in tablet mode.

  Yesterday, I installed HP Support Assistant in the hope, he suggests a solution.

  It didn't at the time, but it made me on this forum where I see that many others had similar problems.

  Today, when I turned on my laptop I noticed that support Assistant has a list of available updates.

  the first who has updated automatically has been updated for HP Notebook System Bios (Intel processors) which, after installation and reboot I had not really noticed any difference.

  Among the list of updates has been 'Intel Integrated Sensor Solution Drivers'

  Because I couldn't find any menition of sensors in my device manager, I installed it.

  Now I have the "Lock Rotation of this view" option may be greyed out there but at least now it.

  Still no spin so I started to double check every thing once again and found that I had a new entry in the registry... Sensor

  present.

  However Enable is set to 0 instead of 1

  

  I changed the 0 to 1 and here I rotation.

  However the only question now is the Rotation options buttons are greyed out, but I still can auto rotate when I flip to the tent, entatainment or tablet mode.

  At least, that my X 360 so that its name and what I bought it for.

  Fact my research I love the lack of rotation is not a specific HP problem but a problem of Windows 10.

  If other problems persist, try to reduce your search settings to fail to win 10 to rotaate, you will see a lot more information out there.

  Thanks to everyone who tried to help me. I hope that my message will help someone else.

• WMP11 & sharing media w / Xbox 360 - does not display settings ' share my media to.

  Recently, I tried to connect my Xbox 360 to my laptop PC running Windows XP SP3. All the official how - in fact seem as easy as going to WMP 11, then the 360 was on and connected to the network and will 'Media Sharing' and check the box, "share my media". However, while they were inspecting the area, nothing happens, no detail windows open upwards. All are two buttons, OK and CANCEL. I click OK, all gray outside for a while as the settings are applied, then it returns to the same window sharing media files, no new options, no new parameters. Like nothing happened.

  And indeed, nothing has changed.

  Gentlemen, what do I do?

  AGVKrioni,

  Sorry to hear about your difficulties.  No fun!  If the Xbox 360 don't watch not appear inside WMP 11 as a shared device, then it is possible that WMP 11 does not see the Xbox.

  1. the xbox is completely up to date via xbox live?

  2. it can also be caused when the Xbox and computer are actually on 2 different networks (despite being connected in the same building).  Connect the computer or Xbox Wireless?  To check that they are in fact on the same network, obtain the IP address of your Xbox.
  -Go to system settings network settings.  Note the IP address.
  -Go to your computer.  See if you can test your XBOX (see on the network).  Open the prompt (start, run, "cmd").  Type "ping ipaddresshere ".  Do you have an answer?

  3. check that you have all the latest Windows updates (there may be other updates/patches for network management issues)

  4 turn off your Windows Firewall

  I hope that these 4 ideas help or someone much more intelligent that I add ideas, because there is nothing else I can offer.  I hope that helps!  Good luck.

• Xbox 360 does not recognize the pictures or videos using Media Center

  My Xbox 360 suddenly stopped recognizing the pictures and videos using Windows Media Center.  I have a number of files on my laptop that I like to stream through Media Center so I can watch them on my TV, but WMC no longer seem to acknowledge their existence.  I can play my entire library of music very well, but when I try to access my photos and my videos, it shows me my user folder and claims that there is nothing in it.  Not really sure where to start even on that.  My firewall is let through the WMC and my network is configured to share media.  Windows Vista by the way.

  Hi Reaper63,

  1. did you of recent changes on the computer?

  2. you receive an error message while accessing files on the Xbox?

  Method 1

  Check if you are able to access photos and videos through Windows Media Center.

  Solve problems with pictures in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-pictures-in-Windows-Media-Center

  Method 2

  Copy and paste the following script into Notepad and save it with a .reg extension. Right click and run it. Restart and check.

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\.jpe]

  "PerceivedType"="image".

  [HKEY_CLASSES_ROOT\.jpeg]

  "PerceivedType"="image".

  [.Jpg]

  "PerceivedType"="image".

  [HKEY_CLASSES_ROOT\.gif]

  "PerceivedType"="image".

  [HKEY_CLASSES_ROOT\.wmf]

  "PerceivedType"="image".

  [HKEY_CLASSES_ROOT\.png]

  "PerceivedType"="image".

  [HKEY_CLASSES_ROOT\.wma]

  "PerceivedType"="audio".

  [HKEY_CLASSES_ROOT\.wav]

  "PerceivedType"="audio".

  [HKEY_CLASSES_ROOT\.mp3]

  "PerceivedType"="audio".

  [HKEY_CLASSES_ROOT\.mp2]

  "PerceivedType"="audio".

  [HKEY_CLASSES_ROOT\.wmv]

  "PerceivedType"="video".

  [HKEY_CLASSES_ROOT\.avi]

  "PerceivedType"="video".

  [HKEY_CLASSES_ROOT\.dvr - ms]

  "PerceivedType"="video".

  [HKEY_CLASSES_ROOT\.mpe]

  "PerceivedType"="video".

  [HKEY_CLASSES_ROOT\.mpeg]

  "PerceivedType"="video".

  [HKEY_CLASSES_ROOT\.mpg]

  "PerceivedType"="video".

  [HKEY_CLASSES_ROOT\.m1v]

  "PerceivedType"="video".

  [HKEY_CLASSES_ROOT\.mpv2]

  "PerceivedType"="video".

  [HKEY_CLASSES_ROOT\.asx]

  "PerceivedType"="video".

  [HKEY_CLASSES_ROOT\.wm]

  "PerceivedType"="video".

  [HKEY_CLASSES_ROOT\.wmx]

  "PerceivedType"="video".

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my internet connection sharing with my xbox 360 does not?

  my internet connection sharing use to work with my Xbox, but all of a sudden, it stops working, I then went on another computer which had xp (my other had 7) and it worked for a little started but still spoil later. I have another computer with xp and won't work at all with it. I think that I put everything in the right seat, and when I plug my 360 into my router it works but I want to be able to play in other rooms. I also tried to fill the connection on all 3 computers and it never worked.

  Hello

  See the following article:

  Use your computer to connect your Xbox 360 console to Xbox LIVE

  See also:

  Xbox 360 support

• Xbox 360 does not leave my sansa view play as "portable".

  I plug in my sansa view on my 360, it will say "connected", but it not is as "portable device" if I could play it through the system... I would appreciate help

  You will need to put your content on the MSC view (put the player left hold/press release of scroll wheel/plug in device).

  In addition, you will need to connect the view in the Xbox in the same way as it appears in MSC mode.

  Enjoy.

  Come on Sansa!

• Xbox controller does not work

  One of my Xbox controller does not work.

  When I turn on my Xbox and I opened (for example) Minecraft.

  He looks up at the sky without touching me same controller!

  Help, please!

  Ask here:

  http://forums.Xbox.com/

  or

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  See you soon,.

  J

  

• Windows Media Center extender on my XBOX works initially, but not after reboot of my XBOX. Error: Failed to connect to the Xbox 360 could not connect to the windows Media Center computer.

  It's VERY odd and very annoying!

  I set up my laptop next to my Xbox 360 with an Ethernet cable directly connecting the laptop to the XBOX, and the laptop is on our wireless network. The XBOX has access to the internet (shared through the laptop), and when I test the PC connection and the connection XBOX Live sound fine to all.

  So I'll try to set up Windows Media Center, it works great! I "Add Extender", put the code to 8 digits. It passes through the installation, all works, no problems and WMC opens on the XBOX, I can go into my library, watch movies etc... works great!

  However! As soon as I turn my XBOX off and back on, it will fail to connect to the WMC.

  He says his 'find Windows Media Center PC' which seems to work fine, it goes to the ' Windows Media Center loading screen "contact...". ", and after about 10 seconds, I get an error"failed to connect the Xbox 360 could not connect to windows Media Center PC. Make sure that the PC is turned on and connected to the network.

  I tried to configure the Extender repeatedly, whenever it works fine until I restart the XBOX... :/ - and its strange cause I still the internet connection (shared through the laptop) after turning on the XBOX, its really JUST Media Center which is screwing around.

  She continues to keep trying to connect then repeatedly fails.

  If I wanted to, I could re-configuration the WMC Extender EVERY TIME turn off the Xbox, which works the first time without fault, but that's all just stupid.

  I can't really understand what is happening here... any help would be appreciated.

  Hello

  Refer the article that could help you solve this problem.
  http://support.Microsoft.com/kb/932163

• Toshiba 46HL900A does not turn on

  My TV turns completely. The Red led will turn from red to green, but the TV does not turn on? Someone knows why? Thank you

  Hardware problem might be serious... to be honest, that you have some many options troubleshooting...
  If its material of serious malfunctions, only an authorized technician would be able to help you.

• camera does not turn on

  I tried to load camera after death, it does not at all, but the orange light is on when it is plugged, let it charge all night and still it won't turn. I videos I would like back, please help.

  The charge indicator lights orange when the charging starts. It seems that the battery is charged. Try to turn on the camera while loading and check if it is turn on.

  Note: The charging light turns off, charging is completed.

  If the camera does not turn ON even when the load is in progress, the service is required.

  You can initiate the service from the link below:

  https://eService.Sony.com/

  You can also contact our telephone support or Chat to try additional troubleshooting procedures.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=contact

  Please provide model # exact camera while contacting support, so that they provide accurate information. You can locate model # on the back panel and it will start with the letters MHS.

  If my post answered your question, please mark it as "acceptable Solution".

• Satellite PRO U300 does not turn off

  Hello

  I am facing a problem for the last few days on my Satellite PRO U - 300 (31st PSU)...

  The machine does not turn off and the power light stays on (blue LED) even after you have disabled. In fact, happened 3 - 4 times when I start the computer normally by pressing the power button / stop, it does not start and I noticed that the indicator was not extinguished even after + shut down +. Like any it is blocked! I have to finally, remove and reinsert the battery to start the laptop.

  Some details of my pc are as under:

  Version of the OS Microsoft® Windows Vista Business 6.0.6001 Service Pack 1
  BIOS Version V2.00
  Processor Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz

  Can someone help me solve this problem. Is it possible that during the uninstallation of programs, any perticular driver file is also deleted?
  Thank you

  JITENDRA

  Hello

  I don't know that you understand the indicator of power, but to me it sounds like AC Power LED and this LED is always on when the laptop is connected to the power supply.

  Power on / off LED is probably what you mean (the other starting on the left).
  Anyway, you turn off your laptop using a standard on the Start button?
  Are you sure you want to use the Hibernate mode.

  Believe me, the entire description here is pretty confusing to me. It may be that the laptop is turned OFF but power light is still on.

  Have you installed something 4 days ago? Or deleted some important application?
  Sorry, but it is not easy to say with certainty what the problem is here.

• Pavilion 15-e020tx: does not turn off pc portable hp pavilion 15-e020tx

  Hello.
  I have a pc hp laptop pavilion 15-e020tx. It does not turn off and does not wake up mode 'sleep'...

  I tried to restore my laptop to factory setting, updated everything I can, but it still does not work
  Could someone help me please

  Update the BIOS to the current version. A F.24. The direct link to the download is below.

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69897.exe

• Does not turn my Iphone 6? /

  I own an iPhone 6 and I have for a year now. I turned off my phone a few hours ago and went to turn it back to the and it does not work. The apple logo appears, but the screen turns off after 5 to 10 seconds of the projected apple logo. I tried pressing the two keys and I also tried to connect my phone to itunes but it doesn't connect either.

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• printer does not turn on

  My Deskjet 6980 printer has stopped working.  It has worked very well so far. Flashing lights said he needs ink. I put in the new ink. Now, it won't turn. The power supply is turned on, the works of output (without surge protector), but the printer does not turn on. In all he has no light on the printer, except light power cord in the back. I tried everything I could find online, but nothing works. My computer was still recording the printer, but since it will not power, says that it is in offline mode. Any suggestions would be helpful.

  The unit may have developed a power failure, but may be also simply in a State of error because of the fresh cartridges.  There are a few steps, I'll try in this case of troubleshooting.

  * If possible, try to remove the cartridges that you recently installed before performing a hard reset of the printer.

  * Hard reset of the printer by unplugging the device, disconnect the other end of the power cord from the wall outlet, separates the power cord of the power supply, wait 30 seconds and plug it back up.

  See also the steps described in the document, found here, to solve a lack of power.  I hope this helps.

• L50D-B-146 satellite does not turn

  Hello

  I have a problem with my L50D-B-146 turns is not on. Very rarely, when I try to turn it on it works. Once I managed to turn on I tried to upgrade the Bios to 1.6 1.2, but you must restart your computer to complete the installation I couldn't because it does not turn on 99% of the time. The laptop didn't work before I tried upgrading the Bios is not the fault of the installation to fail. Also when I get to turn Windows works perfectly fine, until I have to turn it off again.

  When I try to turn it on the power button light works and you can hear the fan, otherwise you may not even see the screen Toshiba Leading Innovation, so I don't think it's the fault of the window. I repeat again once you can activate from time to time, but very rarely. Also it is not the fault of the monitor that I connected the laptop to an external display, and again, there was a problem.

  I would be very grateful for any solution to this problem

  The solution to this problem?
  I don't know if anyone here can offer virtual diagnosis and offer the working solution.
  When the machine works sometimes such a problem is not easy to understand. Such behavior of the laptop must be analyzed and may be tested with diagnostic tools.

  What we do here, it's just to speculate at what may be the problem. Looks like the BIOS related issue. For some reason, from time to time your machine cannot pass the BIOS checking the material.

  Have you already contacted Toshiba services and asked for help?