HELP blackBerry Smartphones: 9000 "BOLD" update has been stalled for hrs now... updated Bundle 5.0 1728

Here is my deal... I have a Bold 9000 and I decided to update today, and I'm sorry.  I had to update my computer program which I think I did.  But now it is in the case of "Update device software" and it seems to be stuck.  When I started it it said I would not be able to remove my phone or I would lock it upwards or something.  It has been 4 hours now and he said that it would be 1 or more.  He crossed the Back Up and installation steps, but it was stuck for several hours on the not reboot.  The green line has left about 1 inch and light seems to be always moving through it as if she does something.

Now, here's the best... It seems that window open on my phone a few hours Registry Permission back.something Abu e-Mobile today trying to access telephone records now the problem is that I can't move the cursor on refuse it (what I choose) or allow options, technically, he's stuck.  I'm sure that it is holding up, but don't know what to do.  Please help as soon as possible.  Thank you

mybbprobs wrote:

Any suggestions?  Thank you.

See the link below to download it and follow these simple instructions.

First find your operator and the system operating file that you want to use.
http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

Tags: BlackBerry Smartphones

Similar Questions

  • Help blackBerry Smartphones! Bold 9900 will restart after repair of the unaccesible built in memmory guest

    Hi I have a bold 9900 it turned off it self even if a file has been download, I turned it on the prompt saying built in unaccesible memmory due to repair detected errors (YES), now it turns on I type the password, and then it crashes or restarts. I had the operating system reinstalled, but the same problem HELP!

    Hi Danial9900

    Welcome to http://supportforums.blackberry.com

    Donwload 9900 OS 7.1.0.1098

    You must cause the error 507

    Download BBSAK
    Connect your BlackBerry via USB (I recommend that you remove the password of your BB)
    Wipe applied.
    Showing error 507 that what follows applies

    1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
    2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
    3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

    VIA | JSanders

    http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/error-507-reload-software/m-p/1477...

    You can update your BB via the Loader via CrackBerry

  • Help blackBerry Smartphones... Has he been asked and solved already?

    for some reason when I get a virtual machine, it uses my ringtone sms and mms. You can change this or is - this is so has to be on BB Curve 8330? Doesn't seem much sense, like I have no idea now if I get a text or a virtual machine, but I don't see any option for the virtual machine. Any help out there?

    There are a few apps on bb app world where you can customize alerts based on criteria set.I.E. the sms tells you you have voice mail so that you can do all the sms who say who its own notification. you have to do some work to see if they do what you want. Download appworld for free, then use it to search for the word "alert", there are several applications of 2, 99-29, $99.

  • Help blackBerry Smartphones! After update of OS - hourglass does not disappear

    I have just updated my blackberry bold 9700 OS 6.0 - it has worked when it was over, although a little slow at loading the images... I put my phone on the charger when I went to bed last night and when I woke up this morning it was just a blank white screen I did a battery pull - now she has just the hourglass & I can't do anything / nothing select / recieve calls or connect it to my computer... someone has any advice?

    Try an another battery pull, but this time remove the battery for 5 minutes. Sometimes, that can help. If it isn't, then it might need reload operating system.

    Here are some easy to follow the steps if you do not need to do:
    http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...

    And if you can't find your computer to recognize the device in step 2 (on the second screen of the apploader), you may need to try to do a battery pull when the unit is plugged.  As soon as you see the PIN or PIN UNKNOWN flash code, click Next.  Who should you get.

    If you have any questions or need additional help, let us know.

  • Help blackBerry Smartphones! Bold 9700 is frozen on start up with the new sim card

    I tried looking for similar topics but could not find more relevant. everyone seems to have no problem with swapping of cards sim on their fat. If there is a thread already open, I'm sorry. I am really frustrated and really need my blackberry to be operational.

    I have a Bold 9700, updated to the latest OS, everything works fine. I recently had some problems with my old sim card so I went to my service provider to change to another (same number, same line, same contract, just a new sim card).

    As it is expected that I was told that when my old sim is disabled, simply insert my new and I use my phone as normal.

    However, when I did this, the phone was stuck at the loading screen (the bar is all white) for eternity (maybe 5 minutes or more) before moving on to the home screen. There is no charge "security check" bar, the phone is completely frozen, no buttons work, the touch pad does not work, it shows 3G top right without the sign of blackberry, there is no service provider name and from time to time the little loading logo clock is displayed.

    I pulled the battery a couple of times and the problem persists. I called the service provider to reactivate the new sim card, they did 3 times, same problem. I inserted the SIM in other non-blackberry phones that I have and it works on all phones. When I put my old sim card in the 9700 disabled, the phone start end in 2-3 minutes, 'check' safety bar according to normal, everything moves, just no connection to the service. When I turn on the phone without sim card it starts fine with a message to say out loud the card sim.

    I even went down to the assistance service technique blackberry from my service provider and they were no help. all they could say was 'we must wipe your phone and reload the software' that I'm trying to avoid, and I can do it myself anyway.

    My phone is unlocked, comes unlocked here in Singapore, I even checked using the method 'MEPD', all disabled.

    This was very frustrating, especially when I need my blackberry for work. What is the problem with my phone? How can the simple replacement of a sim card if difficult on a blackberry when there is problem free for ANY other phone I've ever used? I am now fear when I travel abroad for business and requires a foreign sim card.

    had the same problem and eventually happeing is that I had to reload my os permeable, and then insert the sim card and upgrade again.

    consusming time, but worth it

  • Need help blackBerry smartphones! Bold 9790

    Plese someone must answer on me I have a bold 9790 it sometimes suddenly stop to the touch, that we will, I have tried to reboot a few times it doesn't work sometimes! I changed my screen yet, is this a software problem?

    I found a solution, first of all, it seems that all blackberry 9790 have a touchscreen problem, it's what you do to solve it, watch this video on youtube... link http://www.youtube.com/watch?v=CxLOfJweDxU look at this to remove the Board you can see a rope attached to the screen that give the soft power and the abilty to have a touch of the screen what you do is push a sale but not hard or u option break you something... This is how I fixed it! If it's a temporary solution, it could happen again :/

  • Help blackBerry Smartphones... accelerometer has stopped working

    Had my storm for 2 weeks now and am in love. Just bought a few games and utilities yesterday. I have loaded the games but only played with 2 or 3 of them. Today, I noticed that none of my apps 'Message' (yahoo, sms/mms, email yahoo & bb) go in landscape mode. The rest seems to work very well. When I'm in landscape mode and open yahoo/sms, etc., they open in Portrait mode. I had absolutely no problem with the accelerometer to this so I guess that its caused by downloads.

    First of all, I have disabled StormLock, then power on/off voltage. Has not fixed the problem.

    Could not find out how to disable the quick launch so I deleted the app and powered off/on power.

    It still does not. Any ideas of what could be the cause? List of CPRS, I loaded are below.

    My o/s est.75. Thank you!!!

    Order information

    Lines of colors! for BlackBerry

    TouchBubbles - Bubble Breaker

    Reversi Touch!

    Gem Blaster Touch! for BlackBerry

    picPuzzle for the storm

    WordScore

    StormLock

    QuickLaunch

    Krypto thanks! Who did the trick

    Strange, however, how it worked fine for a few weeks until what I put a few apps.

  • PLS HELP blackBerry smartphones! High utilization of the processor to 100% (v6.0 Bundle 3049) because of the net.rim.io.impl module

    (my 3rd attempt to get support on this critical issue)

    .

    Hello

    .

    I have improved my Torch (9800) a week ago and have been noticiing serious battery drain issues.  The problem is VERY persistentand happens most of the time.  I am currently on OS v6.0 bundle 3049 (v6.0.0.706, Devils, 6.6.0.246).  My Wifi and Bluetooth are always TURNED off.  Only by using the Bell service provider network, for which I have all 5 bars available.

    .

    I investigated further and found that the Blackberry system software was running with more than the processor - especially in the high 90s.  And this corresponded over the hours until the battery was dead.  I have since deleted all the apps I have suspecpected - such as the Office of Nice and LinkedIn.  But the problem persists.

    .

    I also close all antennas - mobile network incl., and there is no change after 15-20 minutes.

    .

    Battery pull was made several times, as I checked and there are no new updates of OS.

    .

    Now, currently, only the Basic apps are loaded (Alt-Back): home, BBM, phone, Messages, Borwser.  All other applications are closed or exit.  The only antenna work is for the Bell network.

    .

    Further study in the modules of the system software of BB, I found that the net_rim_io_impl, is her consuming ALL the CPU.  I don't know where/what this module does - so I'm not clear on this service within the BB I can disable (OFF) to get rid of the issue.  Or soft. I can remove it to clear the issue.

    .

    Please see the following screenshots, the CPU for the system a little, drops as Options use a part, otherwise it goes back 90 years, if left alone: -.

    And in the system software of BB: -.

    .

    Please help and guide, with either a fix to the module, or via a workaround solution, in which some service can be stopped or a setting can be changed to avoid this battery drain.  This is my 3rd attempt to request for help - so far that anything is coming - not even an acknowledgment that there is a problem, or how I can get help.  I'm still in the warranty period of 12 months.

    .

    Thank you!

    I reload the OS at this point and not restore data after, it comes to prove that the device is ok.

    You could make a backup and try to wipe it too if ok start selective points files until you find out what is the cause.

    help reloading here

    http://supportforums.BlackBerry.com/T5/device-software-for-BlackBerry/how-to-reload-your-operating-S...

  • Help blackBerry Smartphones! How to reset the password for Wifi?

    Hi there - just got a Blackberry "BOLD", today, but trying to connect to my network domestic wi - fi, I mistyped the password.  When I try to connect to the wi - fi, I get a message telling me that "the connection failed due to incorrect network credentials. Check security of saved network settings. "  I guess that's because the password that I entered is incorrect, but it does not give me the opportunity to be reintroduced in this.  I have explored the menus, but can't find how to restart and reset it.  Can anyone help?

    Hello and welcome to the community!

    I can't say what OS you're on and these instructions change considerably depending on the level of the BONE. But, if you're on 7.x (and perhaps even 6.0), do this:
    Homescreen > Options > connections and networks > WiFi network > press the Menu key > select saved WiFi networks > change the network in question

    You can also delete the saved network and then start again.

    Good luck!

  • Update Adobe Reader has been 'download' for over a week now it's preventing me from disconnection and close my Mac mini, cannot close.  The window does not close ever, everything continues to turn around... help!

    How can I stop the "Adobe Reader Update" leave constantly trying to download?  It has been over a week now, preventing me from signing too out of my computer and other issues. Can you help me please? Thank you!

    Hey rubyrose1950,

    Could if it you please let me know what version of the operating system you are working on.

    You could try uninstalling the drive and install it from the below link:

    Adobe Acrobat Reader DC install for all versions

    Let me know how it goes.

    Kind regards

    Ana Maria

  • The Parental account for my child's account has been disabled for inactivity and to accept the new terms of use for the xbox update must be parental confirmation.

    The Parental account for my child's account has been disabled for inactivity and to accept the new terms of use for the xbox update must be parental confirmation. I can't do this because even when you type the parental email address in the password recovery, it does not recognize because because it is inactive. I need a Windows Live technician to reactivate the account and I don't know if I should put the email address of the account here for security reasons. My other question is also if you can't reactivate can you switch parental permissions to another account.

    -Thanks, Michael

    Hello

    What version of the Windows operating system is installed on your computer?

    I suggest you to refer to the following article in the Xbox and check if it helps.

    Xbox LIVE connection issues:

    http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

    If the steps in the section of the Xbox did not help, then it would be better to post the same question in the Windows Live ID portal and forum Xbox to get help. We have a dedicated team to help you with questions of this type.

    Windows Live ID Portal: http://www.windowslivehelp.com/product.aspx?ProductID=10

    Forums Xbox: http://forums.xbox.com/

    Hope the information is useful.

  • My Dell computer has been disconnected for more than a year, and now Vista updates will not be installed.

    I have a Dell Inspiron 1501 which has been offline for over a year and now will not update Vista install. The security updates, 90% will be installed, but all others fail. Contact Dell or Microsoft?

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Help blackBerry Smartphones with Blackberry-contacting

    Hello

    I hope someone can help me.  Curve daughter 9300 has been gel market for a few months, but now is causing major problems.  The only way to fix this is to take out the battery for a while.

    As the phone was less than a year, I brought back to the store where you bought it, he was sent away and took 2 weeks to return.  They initially said that there was no fault with the phone but said then it was not actually watched as the envelope had been changed.  My daughter has managed to break the original envelope, so it has been replaced by exactly the same black case.  They refuse to do anything despite the phone may not be fit for purpose IE does not properly.

    I spent last week, fight with the retailer, but nothing helped, they just isn't any service to the customer and are not interested.

    Can someone advise how to contact Blackberry in the United Kingdom please.

    Thank you very much

    Engadine wrote:

    I spent last week, fight with the retailer, but nothing helped, they just isn't any service to the customer and are not interested.

    Can someone advise how to contact Blackberry in the United Kingdom please.

    Hello and welcome to the community!

    To answer your specific question... RIM offers zero first line support to end-users, including warranty... all support starts with the carriers, resellers and authorized service centers, all who can degenerate case RIM free of charge for the end user. Contractually, you have no free path to work around the shop, you work with and try any official escalation rim... as your warranty service provider, they have the responsibility to repair your security under its contract terms. I suspect that, when you read your real contract, you'll find that they are indeed correct in their assessment.

    There is something called incident support, but it costs to just ask the original question, since you are not through the contract, you signed at the time of purchase. If you want to study, you can check it out here:

    It is also perhaps a few good reading here:

    But, overall, from your description, I don't hold much hope... If you have cancelled your warranty in effect, it is about the end of it.

    Good luck!

  • My Hotmail account has been blocked for sending too many emails-electronic-Help?

    My Hotmail accoount * address email is removed from the privacy * has been blocked for sending too many emails.  How can I solve this.  I don't have texting on my phone, need to do another check.  Help.  I have another account * address email is removed from the privacy *.

    Hello

    The question you have posted is related to Hotmail and will be much better suited in this community. Click on the link below.

    Windows Live Solution Center

    http://www.windowslivehelp.com/

  • Had sent the message about the Blue error screen. Has been asked for more details. I hope this helps.

    Had sent the message about the Blue error screen.

    Has been asked for more details.

    I hope this helps.

    BCCode: 10000050 BCP1: FFFDF6F4 BCP2: 00000001

    BCP3: BF90DB41 BCP4: 00000000

    OSVer: 5_1_2600 SP: 3_0 product: 768_1

    Hi VASANTHFERNANDES,

    ·         You did changes to the computer before the show?

    ·         When exactly you receive the blue screen error?

    ·         What is the full error message?

    Follow these methods.

    Method 1: Disconnect all external devices and check if the problem persists.

    Method 2: Start the computer in last known good configuration and check.

    How to start your computer by using last good known Windows XP Configuration

    http://support.Microsoft.com/kb/307852

    Method 3: Follow these steps:

    Step 1: Start the computer in safe mode and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 4: Follow the steps in the article to check the drive for errors.

    How to perform disk error checking in Windows XP

    http://support.Microsoft.com/kb/315265

    Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

    For reference:

    Demystifying the 'Blue Screen of Death'

    http://TechNet.Microsoft.com/en-us/library/cc750081.aspx

Maybe you are looking for

  • My iphone 6 recently stopped playing music on my car by bluetooth. He repeats just the same song on

    My iphone 6 used to play music via bluetooth on my car radio while that plugged into the USB port for charging. Since the last update I have nothing but trouble. Whenever I plug my phone change to repeat the song & repeat continuously. It also does t

  • ERROR ON STARTUP BLUE SCREEN

    Hello I have a computer laptop dv6-7010tx, and very often I get a blue screen on startup. I installed a windows 7 ultimate 64 bit and I tried to recover as well. But the issue refuses to go. I have two pictures here that will give an idea of the prob

  • where can I get 10.9 and 10.10 for my mac so my last is 10.8.

    I jumped OS X 10.9 and 10.10 on my system at home that I need a stable system during this release cycle and had no time to fix potential problems. If it's not broken, don't fix it! 10.11 wreaks havoc on my system to work and I had to go back to 10.7.

  • Lync 2010 won't download - error says that it requires Windows 7

    Lync 2010 won't download - error says that it requires Windows 7 BUT I HAVE WINDOWS 7! Very frustrating. After the use of Lync 2010 for the last year, he made a self-introduction to date and in a first, told time that a file was missing. So I uninsta

  • Bucher werden nicht mehr displaying.

    ICH habe ADE auf dem Tablet installed.Tablet of Das habe ich mit einem authorisiert Buch.Danach habe ich several pyre nach ADE added. Mir Dabei ist ADE und ich would loss stuck ADE mit dem Manager of tasks. EIB Neustart keine pyre displaying werden m