Help. BSOD when starting Vista in Fusion 2.0.1

Similar Questions

• Get the black screen when starting Vista

  Well, I bought a Vista in 2008 and he had worked pretty well and then as a few days ago, I'm starting to turn it on and all I get is a black screen! I really need to get it fixed because I need for school and really don't want to have to go buy a new:(toute suggestion serait vraiment apprécié!) 1

  * original title - I'm NEED HELP! *

  You get a Splash Screen (Dell, HP, etc. Logo) when you turn it on?

  Or is it totally Virgin market?

  If completely empty, it may a hardware failure.

  If under warranty, contact the manufacturer.

  If this is not the case, contact a local and trusted computer repairman.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you get a splash screen, Windows tries to load, but do not succeed, try the following steps:

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Receive error message "is not a boot disk" problem when starting Vista

  I need help!  I used Ubuntu for a class exercise.  When I have finished using the bootable cd and tried to go back to Vista I get the error message "is not a bootable floppy.  Please insert a bootable floppy disk and press a key to try again...? »

  starting the PC and if you see the splash screen, immediately press "esc". You should have an option to select your hard drive. Use the arrow keys to select and press ENTER to start Windows Vista.

• BSOD when starting the Satellite C

  My laptop crashed today, and because that everytime I restarted my laptop, a blue screen came, I talked to technical support.
  He told me to do a HARD drive recovery I did. The laptop is still on as usual, but it too is windows service installation and stuck on the blue screen again.

  Now when I try to press F8 at startup "repair my computer" isn't there.
  Please help, really need to work again :)

  Hello

  > Now when I try to press F8 at startup 'repair my computer' is not there.
  It seems that you didn't create a floppy disk for recovery in the past. Right?
  Well, it means that you must order this disc, if you want to retrieve the laptop once more.

  + But back to the question BSOD: +.
  BSOD may appear due to a software problem or hardware problem.
  If the BSOD could not be resolved by retrieving the notebook, then I suppose that the material is affected.

  In General, s for Toshiba laptop technician should check if the recovery procedure is not possible, or if something goes wrong after picking up the device.

  In my opinion, the HARD drive and RAM should be tested at the first step.
  If you wish, you can download the tool called Drive Fitness Test that would test the HARD drive. You can also remove one of the RAM modules, and it could test it in each memory slot.

• Tecra M3 PTM30A: BSOD when starting - how to reinstall Win XP?

  Hey

  I have a Toshiba Tecra M3 PTM30A-029002 model number and iv recently met with a problem which I think has a virus.

  When I start computer normally it goes to the XP loading screen then goes to a blue screen saying stop: c000021a (fatal system error)' and just stay on the screen until I got disabling. This happens every time

  When I tried to start in safe mode it put all these numbers and letter then it just restarts.

  I was told to use my windows XP CD recovery but I don't know how to reboot from the cd. I press F2 at the beginning and the Red Toshiba logo comes up with these different pictures of the bottom to select and I've tried them all but none work

  Please help I need this problem as soon as possible because this isn't really my own thanks for laptop

  As far as I know it of not possible to start from a shared CD/DVD external USB drive!
  Need an external CD/DVD drive with PCMCIA card that could be more expensive than a CD/DVD drive is internal.
  So I recommend you to choose the internal CD/DVD drive, supported.

  However, I put t know if you tried to boot from the CD correctly.
  The point is that you must press the F2 key, but you must press the F12 key to get the boot on the screen menu.
  Choose the ODD (CD/DVD) as a source of start-up, then attempts to boot from the recovery CD Toshiba.

  Check this box!

• Pavillion DV7 4077 cl: BSOD when starting windows 7

  My original processor in my HP Pavilion laptop went and I replaced it with a Core i5 480M processor, but when I start the computer it only does BSOD! I uninstalled the graphics drivers and when I try to use the ATi Radeon graphics card, all I get is 'Windows has stopped this device because it has reported problems.

  Problem solved. Got i3 370M inside and I am able to get to the Intel HD Graphics! Thank you very much!

• BSOD when starting Photoshop CC 2015

  I downloaded Photoshop CC 2015.All was fine, but when I updated my GPU driver and open Photoshop, Windows gave me BSOD with error: KERNEL_SECURITY_CHECK_FAILURE. Same thing happened with first Pro CC 2015.Can you help me?

  PS: my GPU NVIDIA GeForce 940 M, my Windows is Win8.1

  Hi Kraftinger,

  This problem is due to the last update of Nvidia drivers.

  You must uninstall the current drivers and to return to the previous.

  Kind regards

  Claes

• When starting Vista, sound 'Device failed to connect' play 3 times, but I do not know for what.

  When I restart or stop and start again, the "device cannot connect times sounds 3 times. I don't really have anything related except for my printer, but it is rarely.

  Hi Pretzilz,

  I don't know if you're still looking for an answer to this problem, but I think I solved it!

  I am running Windows 7 Ultimate and I had installed Norton Internet Security 2010.  I decided to uninstall it after that trial was up and try Norton Antivirus instead.  I had also used the Norton Removal Tool and then these mysterious sounds "device could not connect" that occur at the start of my computer, just after the Office responsible.  He was literally driving me crazy because this is a brand new computer that should work just fine for most.

  So I investigated further after reading your post on the errors of the device, and I decided to take a peek in my "devices and printers" and "Device Manager ' screens."  Of course, the old screen claimed that my 'Ultrafast media player' and 'USB2.0CRW' required for troubleshooting (a small yellow sign).  I tried the troubleshooting through this screen, but to no avail.

  I went into Device Manager"through and under"Portable devices"my previously assigned different five of card readers had in small panel yellow symbols on them.  I went into the Properties window for each, and it says the following:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Apparently, the Norton Removal Tool damaged my registry.  So I called my Alienware support people, and while they had me waiting a solution, I found a Microsoft Windows support article, which actually worked:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

  I went to each player who was in trouble on the Device Manager, click right on it, uninstalled, and then scanned for changes to hardware and the OS found once again, not reinstalled, no problem.  I rebooted the computer just to make sure and voila.  No sounds more mystery.

  Oh - and I heard a total of five beeps at startup, but I have five disks pre-assigned.  I guess you hear three beeps, because you probably three drives.  I hope this works.

• sound does not play when windows vista starts or stop

  sound does not play when windows vista starts or stop

  Hello

  • When the issue started?
  • Will there be any changes made prior to this issue?
  • Otherwise, the sound works well?

  Step 1: Refer to "the startup sound is not played correctly when you start Windows XP or Windows Vista
  ' http://support.microsoft.com/kb/321735 '.

  Step 2: To change the sound on closing down.

  Audio a.Open and Sound themes by clicking the Start button, clicking Control Panel, hardware and sound, and then clicking sound.

  b. the sounds tab and then, in the list programs, select the event you want to change the sound.

  c.Under sounds, click the sound you want to associate with the event. If the sound you want to use is not listed, click Browse to locate it.

  'Change the sounds of the computer '.
  ": http://windows.microsoft.com/en-US/windows-vista/Change-computer-sounds "

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• help with tabs, I've reset but does not solve problem when started

  When started the new tab is blank and does not show the previous 9 pages as before. I went to help troubleshooting and then reset Firefox. It works until I closed Firefox well when I start a new session new tabs are white again.
  Help, please.

  The icon of the grid 3 x 3 is on the page of the tab itself (screen attached). Simply, that shows and hides the thumbnails. In fact, I now empty placeholders. It erases the images?

  Anyway, if you have the about: newtab about: config, but you do not have the subject: newtab page when you press Ctrl + t, the problem is usually an extension. You can review what you have and configure or disable here:

  Firefox orange (or the Tools menu) button > addons > Extensions category

• Help please: error 0x0000007e Stop when starting up on top of Satellite P30 110

  Hello

  I wonder if someone can please help me with a recurring error message I get randomly when starting up. I have a satellite P30-110, with WXP Home SP2 installed. Mobile P4 3.2Ghz processor, 512 RAM, ATI mobility Radeon 9600/9700 series.

  Turns off the computer as usual last night. He walks this morning and think that it load the bios OK and then got the black background with Win XP, and then think about this error page came. Has a blue background with the following text:

  "A problem has been detected and Windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

  Technical information:

  "STOP: 0X0000007E (0XC0000005, 0X00000000, 0XF891D384, 0XF891D080).

  I turned the computer off, then restarted when prompted chose to start windows normally, and it seems to start up fine.

  Any ideas?
  Thanks for your help.

  Hello

  If this is the first time, you've seen this error, I'm not too concerned about it. There are not too many people who have not encountered this scenario occasionally.

  The time to worry, if it happens regularly, as this may indicate a component defective that will need to be diagnosed later.

  On this occasion, I suspect that the start process has detected an anomaly any (possibly a play on hard drive control) and rather than allow Windows to continue it stopped with the error on blue screen.

  Kind regards

• Constand BSOD on XP, Vista, 7 (x 64 and x 32) any help?

  Hi all, my problem is that I often get a BSOD on XP, Vista and 7 as on 64 as on 32-bit versions. My system spec is:

  Intel Core 2 DUO E8400 (3.00Ghz/3.00Ghz), motherboard - nVidia nForce n650SLI-DS4L (GB)

  Video - nVidia GTS 250 1 GB (ASUS), RAM 4 GB Transcend. HDD Samsung 1 TB (3' 5SATA)

  All the drivers are up to date, SATA, RAID, video, audio and etc... yet of the BSOD as 0xc000000A IRQL_LESS_OR_EQUAL and

  0xc0000007, B1 and BSOD like this can not find a solution, I guess it's a motherboard problem.  Thanks in advance

  Hello

  If you have tried all the people while there should be comments, you can provide - "say nothing."
  worked,"does not help us help you. And you have never posted a link to the minidumps.

  Because it happens on the 3 OS must be material or something that affects
  all 3.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Is someone can you please tell me how I would get my Windows Vista calendar opens automatically when starting my computer to the top? Thank you!

  Is someone can you please tell me how I can get my windows vista calendar opens automatically when starting my cpu to the top? Thank you

  Put a shortcut to the calendar program in your startup folder:

  1. Click the Start button.
  2. Click Open .
  3. Double-click programs .
  4. Double-click Startup .
  5. Click the Start button.
  6. Click on all programs .
  7. Right-click Windows Calendar , hold down the button, drag it in theStart window and let go.
  8. Click copy here .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Photoshop CS6 crashes when starting my Mac. Reset preferences does not help. Download CS6 again if I have my serial number? And what do I need to uninstall the version crashed everything first?

  Photoshop CS6 crashes when starting my Mac. Reset preferences does not help. Download CS6 again if I have my serial number? And what do I need to uninstall the version crashed everything first?

  Hi christophp,

  Yes, you can do this, please follow the steps.

  Uninstall the existing version for Photoshop

  Then use the Adobe CC cleaning tool to remove files left link: http://download.macromedia.com/SupportTools/Cleaner/mac/AdobeCreativeCloudCleanerTool.dmg

  Restart the system

  Follow the link and download Photoshop CS6: applications download Creative Suite 6

  Enter the serial number to activate it.

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Get an IRQL error when reinstalling Vista on a formatted HARD drive.

  My (HP a1700n) office has been very slow, perhaps a virus. I ran Norton NIS and also had Norton disk utilities cleaner. Before that the Office stopped completely, I was able to shoot the important things (pictures, videos, etc) nothing else I could lose and wasted. I decided to start over and reinstall the Vista operating system, since I don't have the disk. Has gone so far as to choose the partition and after that he began to «analyze...» "it froze and gave me some kind of error that the partition not could not be found or something like that, well I deleted the partition with the recovery partition since I created a disc a new partition using all the available space, but now I get the not_les_than_ error message. I only go as far as to choose the partion and starts to analyze then the BSOD appears. I did not add anything other than a 1 GB of ram and I removed it, so now the computer only has the 1 GB it is came with, everything else is what came with when I bought it 2 years ago. I don't know if it's hardware related or I'm doing something wrong.

  Any help would be greatly appreciated.

  Eric

  If you get BSOD when installing, try the Vista repair Forum for advice and give them all the details of BSOD error.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  See you soon.

  Mick Murphy - Microsoft partner