Similar Questions

• Model bag Clickfree Automatic Backup Device HD325 does not work in the Windows XP computer.

  Original title: BAG Clickfree Automatic Backup Device model HD325

  Cannot use the automatic backup device model Clickfree BAG HD325 on Windows XP.  It's a plug-and-play device.

  I tried to pass by and update the driver, but the wizard tells me there are no newer drivers available, and when I try to restore the driver tells me that there is no previous driver.  The USB port works properly and is the reading device.  I also tried to uninstall and reinstall the driver by using Device Manager, and the camera will not work properly.  The taskbar has said it malfunctioned, impossible to install correctly. and won't work properly, but after fiddling around by using the methods mentioned above, it says now that it is installed and ready to use, but the program does not start automatically.  I've been through to try to start the program manually, but it is not listed in the start menu or desktop.
  I also tried to add material using add new hardware, but it's not listed there either.
  I was able to use this program in the past, why I am no longer able to use this device?

  Hello

  You are able to use any other USB device on your computer?

  You can follow this link & check if the problem persists:

  USB port may stop working after you remove or insert a USB device

  Hope the helps of information.

• PowerVault MD3220i error (insufficient ability to backup device Cache)

  Hi all

  I appreciate your time and assistance with the following question.

  I recently upgraded to the latest firmware on my HP MD3220i and installed the corresponding update of the NVRAM.

  After you install the update, I get the following error in MDSM.  I checked the cache backup capacity and the total used the two related 1 680 MB.

  Is there a reason that the error occurs and what is the best approach to fix this problem?

  I checked the forums but don't see anything specific in addition to replace the module or the upgrade of cache memory.  Otherwise, the device works without problem, but like most of you, I hate this clear amber flashing in a data center perfectly Blue :)

  Thank you!
  Omar

  Ability of the insufficient Cache backup device

  Hello, Omar.

  This error has been research. In all cases this error is visible by our technicians of telephone, the RAID controller is replaced.

  After talking to some experienced engineers, I would recommend replacing this controller.

  This error can occur either bad shutting down the table leading to a corruption of the meta-database backup, or the stick (a small SD card) cache could be dethroned.

  You * can * try to remove the controller, wait that the "power run" for draining, reinstall the cache memory card and then put it back in the slot. Who can clear this error, but no promises. However, we do not replace the cache card herein. The only thing that replace us inside the controller's battery.

  I hope that helps you out. Let me know if you have any questions.

• Try to install USB hub, error: device driver software was not successfully installed. Please consult the manufacturer of your device to help get this device installed.

  Software device driver has not been installed successfully. Please consult the manufacturer of your device to help get this device installed.

  Failed. Generic USB hub.  I went to the Device Manager and clicked on update, but it did not work. Can you help me.

  original title: DEVICE DRIVER has NOT been INSTALLED successfully.

  Go to your computer manufacturer's support web site and search for the Windows Vista drivers for your specific model number.

  If there are drivers Windows Vista, then to download to a folder on your hard drive and install all of them, in starting with the card mother/chipset drivers SATA, LAN, Audio, USB, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 / Vista drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• stop and start sequence for DL2000 MD1000 and TL2000 backup devices

  IM moving my backup devices and would like to get feedback on the Bay sequence of stop and start for my Dell DL2000, storage server MD1000 and TL2000 tape backup devices.  In what order should I stop and start?

  Thank you

  Hello mojogar,

  You will be required to turn off Tin the following order:

  Shutdown

  1 TL2000

  2 DL2000

  3 MD1000

  Startup

  1 MD1000

  2 TL2000

  3 DL2000

  Please let us know if you have any other questions.

• When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036

  Error image system original title: windows 7 0 x 81000036

  I'm doing a backup system image.  When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036.

  I have an ESATA connection on my Dell laptop I was trying to make the image on.  I use the unit every day to save files and which works very well.  He just leaves me CCADE with the system image backup...

  any ideas?

  Hello

  ·         You have created a system image backup before that?

  ·         You did it changes on your computer?

  ·         Is your esata formatted NTFS drive?

  Try to save the image of the boot system: http://support.microsoft.com/kb/929135

  Note: make sure that you start the computer in normal mode after a repair.

  See also the linkfor more information about the backup: http://windows.microsoft.com/en-US/windows7/Back-up-your-programs-system-settings-and-files

• need help integrating the Seagate backup device has (including Norton) with my PC reconfigured under Vista Home Basic(which I feel has a virus/adware).

  For awhile, I got my Seagate FreeAgent GoFlex - who had pictures, Favorites and my Norton 360 - my 2007 Dell PC security. I ran some time without him and maybe adware or virus. There are more photos, mostly same Favorites and no security suite. Is it possible to run the Seagate Nortonfrom? All data can be embedded, and then run the Norton and zap the malware?

  Your message is in the forum for anti-malware for Microsoft Security Essentials (MSE) program.

  Because Norton is your provider of anti-malware you must request assistance from Norton Support: http://us.norton.com/support/

  Kind regards...

• need help with backup

  I had a mini ipad for some time, but as I travel a lot I have not been able to save. connection to my itunes allows only set up like the new ipad. I don't want to do what I'm going to lose all my data.how can I save in this case?

  It seems that if you have a major problem since you have never saved before iPad, therefore, the iPad thinks it's a new feature.

  These measures can help:

  If you are unable to make a backup of your iPhone, iPad or iPod touch - Apple Support iTunes

  Or you might be able to try the file > devices > save in the iTunes menu as soon as you plug your iPad on iTunes.

  Frankly, I'm pessimistic, but none of these will work for you.  They are worth it, however.

• Time capsule: no backup, device not found but internet work

  After my vacation my Time Machine's backups. The Internet works, but the backup utility cannot find the device more. The last backup is a few days before my holiday a month ago.

  In the Time Machine - page select disk (config) TC logo is there, but the only option is to 'remove' the current disk/copy.

  El Capitan, Time Capsule + Airport Express; Time Machine

  I think I have solved the problem in a strange way:

  -J' watched the disc of airport in the Finder; He had to connect to the TC unit (password information automatically), and content (two sparsebundles) was now visible.

  And after that, at the same time the backup started. It will take 7 hours to complete the backup. It seems that it is regarded as an initial backup then.

  Furthermore, the disc name is passed automatically Time Capsule etc. airport to disk .

• More than one backup device on one Time Machine HD

  I have an iMac, MacBook Air and airport Time Capsule and want to use Time Machine to back up the iMac and MacBook Air at this time Capsule.

  Is the OK of Time Capsule have more than a backup Time Machine on his hard drive or time Capsule prefers to be dedicated to a single device?

  Thank you

  -Mike

  You can absolutely use the time Capsule to back up multiple devices, as long as you're not on its storage capacity. For example, if your Time Capsule 2 TB of storage, it will not be able to save six iMacs with, say, 1 TB of data on each, but he can easily save your six iMac if you use only 128 GB of storage on each.

  Moreover, the mode of operation of Time Machine is that it backs up your devices until it fills up with backups, then it starts the deletion of old data, then you are more likely to be able to go back, say, eight months, a Time Capsule, which is the only backup of a computer.

  The first backup you make take as much storage, then it saves only the changes, then other backups take as storage space (unless you happened to download several movies or installed several video games since your last backup).

• Restore the new backup device

  Hi all

  I'm going on vacation soon and I am owner of an iphone more than 6 s. As it is a holiday adventure I plan take my old 5 c.

  I have not used the 5 c in some time, and was going to factory reset it and then restore from my back icloud up.but install a sim card different (cheaper local sim)

  I can do, what steps and be my 6s still be updated and fully working at home >

  Kind regards

  DJ

  Yes.

  You can restore the older device with a more recent backup file.

• Help - WARNING backup Icloud needs space

  Since the last update from my ipad to 9.3 I continually get the error that icloud doesn't have enough space for the backup of this device.  The problem is that there are 3.4 GB available on icloud so it shouldn't be a problem.  Is this a problem of Ios 9.3?

  Backup after ios issues 9

  Backups - troubleshooting IOS

• Different backup devices 2

  Can I save my IMac & IPad at the same airport Time Capsule?

  The iPad is not back up directly at the airport in Time Capsule... it back up to iTunes on your Mac... or... to iCloud depending on what destination you have chosen. See this document from Apple for more information about backups of iOS.

  How to back up your device using iCloud or iTunes - Apple Support

  If... you have the support of the Time Capsule iMac, then the iPad in iTunes backups are so backed up.  So, the iPad could be backup indirectly in the time Capsule.

• Help, please! Device drivers system & basic coprocessor are missing after Win7 upgrade

  Please help with under drivers

  Model - dv9500

  (1) system base unit

  Bus 2 PCI, device 5, function 3

  Hardware - PCI/VEN_1180 & DEV_0592 & SUBSYS_30CF103C & REV_12 ID

  (2) system base unit

  Bus 2 PCI, device 5, function 2

  Hardware - PCI/VEN_1180 & DEV_0843 & SUBSYS_30CF103C & REV_12 ID

  (3) coprocessor

  PCI bus 0, device 1, function 3

  Hardware - PCI/VEN_10DE & DEV_0534 & SUBSYS_30CF103C & REV_A2 ID

  Thanks in advance!

  It is always helpful if you post the full product name or product number. You can find it by removing the battery and looking for the label that says p/n. display the string alphanumeric full here in your thread.

  Have you looked into the system of operating systems section in guides stickied for that information?

  Take a reading this post by Member Daniel_Potyrala. Read the latest pages for locations of tutorial and driver.

  #1 is a Ricoh card

  #2 is the Ricoh storage controller

  Your #3 is that a driver Intel Core 2 coprocessor not installed n not question.  Go to the driver download Intel Web page. Find the correct driver from the OS for your chipset/processor and install it.

• Need help on backup disks

  I did some backup discs with my dvd - r. My husband had downloaded the limewire and removed after that that he was done with it. Then restored the computer to his sentence of the factory, like how it was when we first opened the box. Now my question is, the drive we did back ups 4... Can they still work? There are some pictures that we have and which are so important and so important documents in there also. and I'm trying to see if these disk backup can still work if I were to insert it in the drive.
  Now, I have inserted the backup drive. Nothing came or some sort of lil' window. NOTHING! How can I do to do this?

  Hi feleti3,

  Thank you for using answers Forum.

  I suggest to open the program that you made the backup with and browse the disc from there.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.