Help! Cannot extract the files

Similar Questions

• Error 1152 when installing programs cannot extract the files to the location

  Hello, as stated in the title I have an error when trying to install programs that need to retrieve their files in the temp folder, such as Nero.It has no matter what program I try to install it just of gives me an error that says files could not be extracted to the location. I tried deleting the contents of the temp folder, but it did not help. I await your response. Thank you in advance.

  Hi NedimMrkaljevic,

  Follow the suggestions below for a possible solution:

  Method 1: Try running disk clean up and remove unwanted system files and folders. Through disk cleanup, you can delete all the temporary files and folders that are not needed on your computer.

  a. open Disk Cleanup by clicking the Start button picture of the Start button, tap all programs, accessories, click System Tools, and then click Disk Cleanup.

  b. in the Disk Cleanup Options dialog box, choose whether you want to clean your own files only or all files on the computer. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. If the disk cleanup: drive selection dialog box appears, select the hard disk you want to clean and then click OK.

  d. click the Disk Cleanup tab and select the check boxes for files that you want to remove.

  e. When you are finished selecting the files you want to delete, click OK and then click on delete files to confirm the operation. Disk Cleanup on delete all unnecessary files from your computer.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  You can also check out the link below for more options on the release of disk space on your computer.

  Strategies to free up disk space

  http://Windows.Microsoft.com/en-us/Windows7/strategies-for-freeing-disk-space

  Method 2: I suggest you perform the clean boot and check if you are able to install the program.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• help cannot burn the file with audio ac-3 to dvd

  HELP A WHILE SO FAR

  Hello

  Thank you for the update from us.

  We are sorry for the inconvenience. I'll probably help you with that.

  Please provide us with more information to better understand the issue.

  1. Codec packs installed and when that you installed?
  2. Has the codec packs that is supported ac3 format?
  3. What other DVD burning software have you tried?

  For the moment, please try the steps below and check them off, it helps to solve the problem

  Step 1.

  I suggest that you try to play AVI files in Windows Media Player, check if he plays well. If so, I recommend that you try to burn from in using Windows Media Player and check if it works.

  For more information, please see the link on burn a CD or DVD in Windows Media Playerbelow.

  burn-cd-dvd-media-player#1TC=windows-7 http://Windows.Microsoft.com/en-us/Windows/

  If the steps above does not resolve the issue please try the steps below.

  Step 2.

  I would recommend you provide through the suggestion of rhylcolinjones of the sub thread link which looks like the similar question, you are faced with.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-DVD-Maker-no-sound/544a3ce8-2617-4FA0-9f5e-4566f334bd5f

  Hope this information can help, please post us with the State, we will be happy to help you.

  Thank you.

• Cannot extract the zipped files

  I can't extract the zipped files.  An audio file on my desktop as one. MP3.zip file, and when I right click on it, there is no option to extract the file.  I have compressed folders that contain pictures and tried to unzip them without success.  There is no option in the menu "right click" to extract the selected file.  My windows lack extraction or unzipping option?  Help, please!

  Hello

  Maybe the file is not a real. ZIP file - try to download another. ZIP and save it - so go ahead and
  Click right on and see if there is an option/unzip Unzip (unpack). If yes then you must check with
  the site where you got the. MP3.zip file to see how to handle. Maybe rename it to filename.mp3
  HOWEVER filename.zip will work.

  Download this small utility which is very convenient and comes in. ZIP format just to see if your. ZIP functions
  actually work. You can keep the utility or delete, it requires no installation and is very low.

  What is there in the Startup - free
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  Download - SAVE - go where you put it - right click on and search for decompress/unzip options.

  ==================================

  IF you have ZIP 3 1 problem here you should fix it up:

  How to restore Vista built-in ZIP files Support
  http://www.Vistax64.com/tutorials/65254-zip-file-support-restore.html
  How to enable or disable the files compressed in Vista
  http://www.Vistax64.com/tutorials/93827-zip-file-compressed-folders.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html

  ---------------------------------

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore and return the file Association in Windows Vista if Original
  http://www.mydigitallife.info/2008/06/22/restore-and-reset-file-association-in-Windows-Vista-back-to-original-default/

  Reset and Fix Broken Windows Vista file Ext and Type Associations (include EXE, COM, SYS, ZIP, LNK,
  Folder, drive)
  http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-Windows-Vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Cannot install software HP7310 for Windows 7 - error: unable to extract the files

  Hello

  I want to reinstall the software for my Officejet HP7310 on my Windows 7 Ultimate 32 of company laptop computer bits.

  I download the software from HP.com site: AIO_CDB_Net_Full_Win_WW_130_141.exe.

  Try to install it, the extraction of files stops at about 88%. Error: Unable to extract the files.

  It seems that the 'Autorun.inf' file is blocked by the McAfee VirusScan Enterprise. McAfee Agent version 4.0.0.1494.

  Can someone help me?

  Thank you

  The problem is resolved. The file has been blocked by McAfee Virus scan.

  After the controls in the properties of McAfee, the problem could be solved.

• When I receive e-mails with an attachment can not open, it says: Windows media player cannot access the file, Please HELP

  WHEN I RECEIVE AN EMAIL WITH AN ATTACHMENT I CAN'T OPEN IT. IT SAYS WINDOWS MEDIA PLAYER CANNOT ACCESS THE FILE.

  Help, please

  How this is related to Windows Update, John?

• [HELP] I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Hi, I'm new developer on the Blackberry platform.

  I make the first application, but there is a problem when I wanted to install in the Simulator.

  My application has several screen and each take the server data, analyzing the data and displays on the screen.

  My problem is any executable thread.

  When I'm using the code below, it is fine. My application can work perfectly on a simulator.

  public TestingScreen() {
     // Runnable thread = new Runnable(){
     //   public void run() {
      // TODO Auto-generated method stub
          // my code get data from server
          Dialog.alert("Hii");
     //   }
     //};
     //new Thread(run).start();
  }
  

  but, if you use floor area or UiApplication.getUiApplication (.invokeLater), I got error "i/o Error: cannot run program"jar": CreateProcess = 2 error, the system cannot find the file specified"

  public TestingScreen() {
     Runnable thread = new Runnable(){
        public void run() {
      // TODO Auto-generated method stub
          // my code get data from server
          Dialog.alert("Hii");
        }
     };
     new Thread(run).start();
  }
  

  I have the 11 screen and all have executable statement and works perfectly. Can run in the Simulator, can get data from the server. But when I create the new #12 screen (copy paste other on-screen), page couldn't use an executable statement. Each I use Runnable/thread, I got error. But when I remove an executable statement my work normally requires.

  I already have Google but I do not get the answer.

  Please advice. Thank you very much.

  Kind regards.

  hrnt, thanks for your answer on this issue. It helped me solve my problem as well.

  Just to add, for someone else, I use the 32-bit and changed Java SDK my way to the bin folder where the SDK was installed.

• the process cannot access the file because it is being used by another process

  Hi, hope someone can help with this,

  I am running windows vista basic 32-bit on a dell inspiron 1520

  I received several messages a day saying "superfetch has stopped working" or "windows search protocol has stopped working" I was advised to run sfc/scannow from command prompt I did the sfcdetails read as follolws.

  2010-09-15 13:55:16, Info CSI 00000185 [SR] cannot repair the military record [l:24 {12}] "cryptsvc.dll" Microsoft-Windows-cryptsvc-dll, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral public key in the store, file is missing "

  Following the advice of another thread, I extracted the file from my Vista DVD and stored in c:\windows\temp, but when I try to copy in c:\windows\system32 I get a message saying that the file is being used by another process.

  I'm not sure what the file is still so I don't know how use it.

  Any help would be much appreciated.

  Thank you.

  The file in the folder system32 first TakeOwnership. Then copy from a command prompt with admin rights:

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Cannot manage libraries. Cannot retrieve CD using Windows Media Player 12, error '"Windows Media Player cannot find the file'

  Original title: WMP 12 won't fill the library, allow me to manage the libraries, or it is for me to rip music

  WMP 12 is unable to find my music files; When I select > Union > manage libraries > music (or any other library), nothing happens. If I try to extract a new music CD WMP will not let me select a location to store the file torn; If a test of tear, anyway, I get an error message saying WMP "Windows Media Player cannot find the file.

  Through the windows, I can see my music library and that it complements filled with many good things and play music that is then added to the library WMP one track at a time. But that bat rather point to WMP.

  I have added and deleted folders from the libraries of music, I used different hard drives, I used the store to library WMP and I installed and uninstalled and reinstalled WMP three times, I tried using WMP with and without Windows Media Center. Nothing helps. Any ideas?

  Hi Watford CVS,

  Try to enable and disable Windows Media Player and check the result.
  Step 1: Disable Windows Media Player
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand multimedia functions.
  c. uncheck Windows Media Player and click ok.
  d. restart the computer so that the changes take effect.

  Step 2: Turn on Windows Media Player
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand multimedia functions.
  c. place a check on Windows Media Player, and then click ok.
  d. restart the computer so that the changes take effect.
  e. check if the problem persists.

  See Or turn off Windows features turn on

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player won't let me rip a CD, the error message indicates that they cannot find the file

  Is watching the guys, I think not that this is a 7 days without some kind of sleep problem, but I can't work out why Windows Media Player 12 will not rip a CD I put it in, I get an error message saying that Windows Media Player cannot find the file I'm tearing and maybe it is moved renamed or deleated in the meantime that my CD is in the CD/DVD drive waiting to be fooled on my laptop Windows 7 64-bit. I ripped the CD loads before but I had to reinstall a complete a month ago, and this is the first time I tried to extract anything on my laptop. If anybodys got any ideas on how to solve this problem, my inner peace would be much more peaceful MCE! Cheers and Happy New Year to the United Kingdom, I wish you a good and peaceful 2014.  Rich.T

  Hi Rich!

  This might help: http://www.fixkb.com/2010/07/when-ripping-musing-with-media-player.html

  See you soon
  Julia

• Windows Media Player cannot find the file. 'If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed or deleted'.

  Original title:

  Problems with rip audio CDs with windows media player

  Bought the CD now 82 and try to tear with the windows media player player, but keep getting the message "Windows Media Player cannot find the file. If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted." What should I do to rip this cd please did tear previously no probs, but now seems to have a problem

  Thanks in advance

  Anne

  Hello
  1. You did changes to the computer before the show?
  2. Are you able to extract other CDs using Windows media Player?
  3. What is the file format of the file you are trying to extract?
  Method 1:
  Step 1:
  You can run the Windows Media Player Library convenience store & check if you are able to rip CDs.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  Step 2:

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  
  Method 2: Rebuild the windows media player.

  exit Windows Media Player.
  b. click Start, type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK.
  c. Select all files in the folder, and then click delete on the file menu.

  Note:
  You don't have to remove the folders that are in this folder.
  c. restart Windows Media Player.
  Note:
  Windows Media Player automatically rebuilds the database.
  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
  exit Windows Media Player.
  b. click Start, type %LOCALAPPDATA%\Microsoft, and then click OK.
  c. Select the Media Player folder, and then click delete on the file menu.
  d. restart Windows Media Player.
  Note:
  Windows Media Player automatically rebuilds the database.

  Method 3: Disable and enable the windows media player. Follow these steps:

  a. open the Control Panel from the Start menu.
  b. open programs and features in Control Panel .
  
  Note: If the programs and features are not available, change the view by large icons at the top right of the control panel.

  c. Select Windows turn on or off features in the left column of the window programs and features.
  d. click on the plus sign next to multimedia functions.
  e. uncheck Windows Media player and then click OK. (You may receive a warning message. Click on the Yes button.)
  f. restart your computer.
  g. to reactivate the Media center follow the same steps and place a checkmark for Windows Media player.
  h. click on the Ok button.

  
  i. restart your computer.
  Reference:
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
  Method 4:
  Change the location of Rip. see the steps mentioned in the link
  given below:
  To change rip settings in the Options dialog box
  
  
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-music
  I hope this helps!

• Failed to retrieve CD - "Windows Media Player cannot find the file. ..."

  original title: rip for Media Player problem.

  My media player won't let me RIP cd in my library. When I try it gives me a box that says "Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. "I thought that the solution may have something to do with me going in the rip settings > more options > and hit"change"under"rip music to this location", because the box under where I am assuming that the location will has nothing in it, but when I click on it it does nothing.

  Hello

  During the extraction process, the Media Player makes a copy of each song, stores it on your hard drive as a file Windows Media Audio (WMA) or MP3 compressed and then add it to your library. Check in the library, if the files are present.

  See the link provided:

  Extract music from a CD

  http://Windows.Microsoft.com/en-us/Windows7/rip-music-from-a-CD

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/rip-music-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-music

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Let us know if that helps.

• Photosmart C4780 installation fails at the "system cannot find the file specified."

  My problem began simply with your printer, a HP Photosmart C4780, who has always had a wireless connection and would not print.  Initially, the checked network connection fine control panel of the printer.  I ran a Microsoft printer troubleshooting, which found a block in line print and authorized.  The first test page print, but did print the "internal test page.  I did not understand what it meant, so I looked for help on the HP site.

  I ran the HP print and Scan Doctorand he suggested I have reinstall the driver.  I have downloaded and saved the current HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver.  When I tried to install a new, a window pops up saying "the system cannot find the file specified," with only a single box for click that simply says "OK".  The installation went through 'examining installation options', after entering "check updates, download updates, install updates" and then it was all in "audit system", who jumped out of the window "file not found" upwards, and when I clicked 'OK', the installation window as well as the error message box simply disappeared.  Which I suppose is the path to the file is under the window, but it didn't fit so he showed not the end.  What I read was "C:\Users\... \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40...»

  I found a topic on the same printer model for the same problem in the forum, which offered this hotfix:

  You must first complete a level 3 of the software uninstallation. I've included the steps below to do this.
  
  1. press the Windows key and the letter R
  2. type %temp%, and then click OK
  3. open the 7z folder (a more recent if there are multiples)
  4 open the util folder
  5 open the folder of the ccc
  6. double-click on the Uninstall_L3
  
  Once you have completed the Uninstall_L3, delete all of the items listed in the temp folder. Note, you will not be able to remove all the elements, please ignore those that do not. Then please empty the trash and perform a clean boot. I've included the document «How to perform a boot in Windows» If your computer does not request it, restart your computer.
  
  Once your computer is back, you must reinstall the printer software. You can do this either by using the Setup CD, or by downloading the software.

  I did what was suggested, until he got to the point where it says it was the case recommend not removing any more items if I had intended on using the HP Officejet printer (Yes, I have a second HP printer connected to the network) anytime in the future.  Not really understand how it all works, I decided to stop what I was doing, so unfortunately it has not solved my problem.

  Do I need to uninstall both printers HP before I can reinstall a?  And if I do that, is there a reason that I wouldn't be able to reinstall the two printers?  Looks like I'm asking trouble.  Bottom line... I can not install the driver.

  I tried to install the full versions and the driver base and still get the same result.

  I have a HP Pavilion dv6 - 3100t for computer laptop, running Windows 7 Edition Premium, version 6.1.7601 family service pack 1 64-bit.  I have not installed new hardware or software.  This printer has always had a wireless connection.  The router I'm using is a Netgear 54Mbps WGR614 v6 (provided by my cable company) and the network includes not only my laptop and the Photosmart printer, but also desktop ASUS, HP printer, an Officejet 6300 series (used only for printing graphics and photos via a wired to the router) and a chip on Vizio TV.  I use Norton 360 first Edition and disabled the antivirus auto-protect when I downloaded and tried to install the driver.

  Help, please!  And thanks in advance for your time and your attention.

  Oh, Jamieson, it worked!  I can print again!  A massive amount of thanks and congratulations to you.

  I couldn't believe it when he actually passed the point where it normally would stop the installation, but then almost at the end, upward jumped «Fatal error during installation»  My excitement sank into a depression.  He said while the installation was not successful and he needed to collect information in order to diagnose the fault.  I looked at what has been collected, and it was more or less gobblety-* beep * for me.  There was a code of 19714722 error condition, if that means anything.

  Then he placed on my desk, the "Error of Installation HP - Windows 7.hta" file and instructed me to do away with the current window, restart, and then open the file and move forward with these guidelines.  I did and he basically had me to restart the computer once again, and then turn the printer off, unplug the printer, then unplug the router, wait 30 seconds and then plug the TAA - DAA and back in, I'm back in the business of printing.

  Thank you very much for your time and patience.

  All the best to you and yours!

• Windows Media Player cannot play the file

  I get the following message appears when you try to listen to a streaming radio station live online.

  Windows Media Player cannot play the file. A network firewall might prevent the player to open the file by using the UDP transport protocol. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:").

  I can listen to other stations, but not this one.  Before about 2 weeks ago, I had no problem getting the live stream.  Has been no change on my computer.  URL is: http://www.wlpv1079online.com/Live%20Streaming%20Page.htm

  Hi Kathy,

  1. what operating system is installed on the computer?
  2. which web browser is installed on the computer?
  3. What is the accurate and complete error message you get?

  Method 1
  I suggest you try the steps from the following link:

  Windows Media Player Error Message help
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D11B6&ContextId=70&OriginalID=C00D2EF9

  Method 2
  If the problem is with a particular station, then I suggest you to contact the support of the radio station.

  Method 3
  I suggest you to disable the firewall and see if the problem still occurs.

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Make sure that you enable the firewall after troubleshooting is completed.

• Unable to play video file error: Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer

  Original title: Windows Media Player shows that the new codecs are required

  Original title: query codec and Media Player re

  Have used windows media player for many years on my dell. Usually to see the videos from Sony handycam. Just downloaded wmediaplayer and recent videos from Camcorder will not open one of the videos.

  The following message is displayed "Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer. »

  As I have not changed anything helpful suggestions please.

  concerning

  The winemaker

  Hello

  1. What is the format of the video file?

  2. what operating system is installed on the computer?

  Method 1: Run the troubleshooter in Windows Media Player on Windows 7 settings:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: You can check if the file format of the music files are supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player

  Note: If you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Method 3: In addition, you can also download & install the necessary codec to play the files.

  For more information, see: Codecs: frequently asked questions

  (For Windows Vista)

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.