Help: Connect printer Brother Fax 2820

Similar Questions

• Brother Fax 2820 and other printers are not compatible with El Capitan?

  What happens in the world?

  My printer worked fine until I upgraded to OX10.11.

  Brother Fax site does not provide a driver for OX10.11. the driver for 10.10 will not add to the printer.

  Then is - how they energize the economy, forcing me to throw a good working printer and buy a new one?

  I can be * off the coast at this point, or have I missed something?

  Apple has released a new set of drivers for brother a week ago. Have you tried these?

  Brother 4.0 for OS X printer drivers

• How can I connect printer (brother)

  How can I connect my printer to the AirPort Extreme

  Sorry, but this is not enough information for us to continue to be useful.

  What exact printer model Brother do you have? Your goal is to connect this printer to the extreme Ethernet or USB port... OR wireless? Also, what is the exact model of your AirPort Extreme?

  Must you print to this printer from your iPhone? If so, this printer does support AirPrint?

• MS Fax and Scan Print grey Driver after installing printer Brother

  I have been using the MS Fax print driver to send faxes. I recently installed a brother all-in-one printer/scanner/fax, and now when I select MS Fax in the selection window printer, all selections are grayed out and I get a message that I have to select a printer. It seems that the printer driver is missing or the registry does not point to it. Any suggestions out there?

  Original title: MS Fax and Scan Print Driver missing

  Thanks for responding. I found the solution to my problem. Congratulations to "XP rocks" on the forum:

  Go to 'control panel', 'programs and features' and in the left pane, click on "Turn on or off windows features". Leave the box to fill out, scroll down and expand, 'Print and Document Services'. Uncheck the box next to Windows Fax and Scan , then click on 'OK'.

  This action allows you to uninstall the current installation of corrupt Windows Fax and Scan. If you are prompted to reboot, do so.

  Re-install Windows Fax and Scan, by following the instructions and checking the box.

• Brother DCP 145C printer/scanner/fax not compatible with Windows 7?

  My printer works on some days and not others.  When troubleshooting it says the spool service is not not running, but the directions of brother
  Impossible to solve this problem.  If I uninstall and reinstall it says that the drivers do not have download.  If I spend all day on the choice of system restore
  restore points different the printer works sometimes, but rarely the printer and scan at the same time.  The next day, it is generally not
  work after the automatic updates when I stopped, even if they are turned off. My laptop is a Windows 7 64 bit and the printer
  is a brother DCP 145C printer/scanner/fax

  Hello

  Have you checked with the support of brother?

  My personal printer is a brother. However, there are many other good brands like

  HP, Canon, Lexmark, Epson, Kodak and others.

  Rob - SpiritX

• Cannot connect printer to mac - status is idle

  I'm fit to be tied for no reason at all, my HP Officejet 6500 printer is connected, but it won't print anything because it says that there is no connection. utility, says the status is idle - cannot figure this out for what whatever - what happens in the world I'm missing?

  Hi @lindyd ,

  I see that you are getting a message "that there is no link. I can help you.

  Check the connections, if you are using a USB cable.

  Try a different USB cable, if you have one available.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click the Apple icon, and then click System Preferences.

  Click on printers and scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the + sign to add the driver, you may need to click the drop down menu to select the name of the printer, and then click the Add button.

  Test the printer again.

  What operating system do you use? Mac OS X: how to find which Mac OS X Version is on my computer?

  How is the printer connected? (USB, Ethernet, WiFi)

  If you need help, let me know.

  Good day!
  Thank you.

• HP Officejet 6500 has more all -: want to print, get fax screen etc.

  I am trying to print a document, shows data, fax sending fax etc how do I cut the portion of the printer fax?

  @dman51

  Assuming that the full feature software is installed, the following may be enough to solve:

  Set as the default printer

  I don't know how 'disable' the fax software - if you do not set the parameters, fax is essentially disabled the fax program does nothing - useful or harmful.  You need a landline connected to use fax - leave the disconnected landline and fax is essentially disabled.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• JO 6500:6500 print to fax went

  I just got a new computer and reinstalled the HP OJ 6500 710 softward I downloaded. But he does not have a print to fax driver I can find. That's happened? I used to be able to do

  Hi @jimmywalter,

  Welcome to the HP Forums!

  I noticed that the printing on the Fax options option is missing with your HP Officejet 6500 printer. I'm happy to help with this problem!

  How your printer is connected? Wireless, Ethernet or USB?

  In case there is a driver conflict, if it please try the HP print and Scan Doctorand let me know what happens.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Thank you for posting!

• Hp7520 prints a fax several times

  My HP 7520 just started to print a fax several times. It was working fine before this. It seems to be of those who fail after 3 attempts to fax service.

  Hi chitchman7000,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you are having problems with the printer print fax several times.

  Please remember that you have the printer power cable connected directly to a wall outlet and not a strip bar. HP printers have built in surge protector and if you have connected it to a strip bar, the printer will NOT get all the power it needs to function properly and it could cause communication problems with the part of the printer fax.  Here is a document that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Please note that the printer listed in the document is a LaserJet printer, and it is used only as an example and that the document is intended for HP products in general.

  Please also check the telephone cable that is plugged into the number 1 slot in the back of the printer to make sure it's the appropriate cable two connectors of copper for the fax.  If you remove the cable from the phone and look at the transparent plastic at the end of the cable plug, you will be able to see the copper strips. If you see 4 strips then you have poorly connected phone cable and this could very well be the question.

  Please do not hesitate to write me again and I'll be happy to offer more assistance.

  Thank you for your time.

• HP Laserjet P1102w does not appear in the list print and fax OS 10.5.8

  Receive a HP Laserjet 1102w and tried to install it on Mac OS 10.5.8.  I downloaded and ran the HP drivers but when I go to add the printer in system preferences/printers and faxes in the list of available printers is empty.  I tried several routines suggested by a search on the web about the problem without result.

  Everyone out there solved this problem?

  Thank you for your attention.  I found the solution.  See below.

  The printer is connected by USB and I also tried to get the wireless connection.  I had intermittent progress on both fronts, but could not make a successful installation of USB connection or wireless connection.  The printer would "disappear" the list of available printers (using the '+' to add a printer, OS 10.6.8) or does not meet the installation commands.  And I could not connect the printer wireless to my network of 'take'

  Print the configuration page was of no use.  If the printer is unable to connect to the wireless network, it reports the IP address of the printer such as 0.0.0.0.

  TO SOLVE THE PROBLEM

  (clicking + under "Print and Fax" printer is not displayed or the name of the printer is removed)

  (1) replace the USB - the original was sensitive to cut;

  (2) give up the wireless - to - wireless set up methods - no amount of factory reset does not erase block of connection of mystery;

  (3) set up the connection through a USB cable wireless (good);

  (3) to switch the browser used to display the configuration page from the printer in Firefox (for Mac OS 10.6.8 34.0.5) for Safari

  (4) use security mode WPA (WEP not as suggested by HP help files).

  The main troublemaker was the bad USB cable.  Go to put wireless in place assume that the printer can connect to the network. As already mentioned, the WiFi was not working.  Network blue light would not come into balance.  A transmission option was blocking handshaking between the printer and my wireless router.  I tried unsuccessfully recommended factory reset methods.

  I needed a good USB connection to access the printer configuration options.

  Don't know which increased with Firefox - a plugin bad or something?  It would be not just connect them to the printer via IP addressing.  Safari worked fine.  (The printer is now successfully Setup that Firefox has decided to work too.)

  THE SOLUTION IS:

  (1) connect the printer and Mac via a cable (good);

  (1) use Safari to go to the printer setup functions (through the system preferences/print & / fax options & supplies show printer web page);

  (2) follow the recommended configuration options (HP support for Laserjet P1102w, OS 10.6, via a USB cable to connect wireless);

  (3) select the appropriate wireless in the list;

  (4) restore WPA security mode; and

  (5) to give the printer the correct wireless network password.

  Thank you and the forum, for your help.

• Office Jet 8610: Print the faxes that I missed

  How to print the actual faxes that I've not received when I was out of ink printer? I have a list of fax numbers - tried - to send faxes for me, but what I can see is the fax number, that they sent, the date and time they sent and the total number of pages. Any ideas? Thank you! StarSema

  Welcome to the HP community @StarSema,

  I read your post on how you're looking to print the faxes in memory of your Officejet 8610, and I hope I can help you. From my memory, you should be able to access the Fax Menu in the configuration Menu of the printer and look for the history of Fax and reprint the faxes in memory.

  If this does not work, or if you have any questions, let me know and I'll do my best to help.

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  I hope I helped!

• HP 5610: I must throw a 5610 all-in-one printer/copier/fax. How to erase all documents that it stored?

  Memory can be removed or destroyed?

  Hey @Csc223,

  Welcome to the Forums of HP Support!

  I see you are trying to have an all-in-one Officejet 5610 printer. The printer has no permanent memory and does not store the work print or fax. It is useless to try to obliterate the memory of the printer.

  Please let me know if this answers your questions. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• My printer icon disappeared from the printer and fax under xp home page

  The printer is ready but the icon is not available on the printer and Fax page.

  The coil of the printer is not available.

  Hello

  For you help I would be grateful if you could answer the following questions:

  (1) what is the serial number and model of the printer?

  (2) was there any software or hardware changes made on the computer before this problem?

  This problem occurs because the print spooler service is damaged.

  I suggest you follow the steps from the link below and check if it helps;

  You experience problems printing, the printer icons display and adding printers, the print spooler service does not work correctly and you receive error messages related to printing on a Windows XP computer.

  http://support.Microsoft.com/kb/919750

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• 8610 says not connected printer

  Hi, just bought the 8610 wireless printer and it's my first hp ever.  Set up was super easy, but now when I try to print wireless from my MacBook Pro, it says not connected printer.  I printed the start fast and even guide reconnected the printer to the network. Also, I restarted my computer and the printer, but it does not my laptop print and takes the "work" in the queue.  I see my work when I click on the icon of the printer on the bottom of my computer but nothing.  I went through the steps you guys have listed on the forum and tried to "open the queue of the printer" and nothing.  I currently am able to print from my iPhone and iPad so I know it works on this end.  Help, please!

  Hi hani2424,

  I'm glad your problem is solved!

  Think about scoring the answer that solved your problem like "Accept as Solution" so that others may not print can see how they can too.

  Best regards.

• My j3680 solution Center has stopped working. I can print and fax manually. I downloaded the full

  My j3680 solution Center has stopped working. I am able to print and fax manually but can't scan. My system is windows 7.

  The 3680 is an officejet all-in-one.

  Hi mahroch,

  The first thing to do to solve this problem would be to run printing HP and doctor Scan. It is a quick and simple tool that diagnoses and solves many problems of printing, scanning and connectivity. See the following link for more information on downloading, installing and running this tool:

  http://goo.GL/SGZxs

  Let me know if this solves the problem, and if not, what the tool provides.