Help... downgrade to windows 7 on my HP Envy 23-c059 all-in-One is a disaster!

Similar Questions

• 8.1 Windows Pro update the problem (from Windows 8 Pro) on Envy 23 TouchSmart all-in-One...

  Hello

  I have a HP Envy 23 Touchsmart all-in-one that I bought a year ago (12/2012). It comes preinstalled with Windows 8.

  System information:

  (a) Intel (r) Core i7 - 3770 S CPU @ 3.10 GHz

  (b) 8192 MB of RAM

  A few weeks after that I had bought the system, I've upgraded to Windows 8 Pro with Media Center that I bought through Microsoft upgrade program.

  Last week (19/10/2013), I saw the option upgrade to Windows 8. 1 in the store and decided to upgrade.

  After a few minutes, I got a prompt asking me to restart the computer, and I did.

  However, I noticed that the screen has turned white, but it restarts not really - I have seen that the hard drive light was still flashing and I waited for about 15 minutes. I know it does not restart because if that were the case I would have seen the HP logo on the screen of the BIOS. A little later, the system entered into mode 'sleep' (at least the light blinked slowly as if it was the sleep). As it was late at night, I decided to leave the system alone and decided to check on it the next morning. The next morning, he was still in mode 'sleep' (as I feared) - when I tried to wake up from her sleep by moving the mouse/hit the return key, he did the exact sounds as if he were to wake up from its sleep (as it always does), but the screen is still blank. The light power button lit up constantly indicating he's awake now.

  At this point, I decided to turn off the system by holding the button for a few seconds. To restart, I saw the HP logo on the BIOS boot screen and the screen went white and nothing came.

  So I decided do a system recovery using my Windows 8 recovery CD and turn off the system with the CD in its niche. This time, the system came and began immediately to restore my OS to a previous version.

  After connecting to the system recovered, I received the following message:

  "Could not update for Windows 8.1.

  Sorry, we could not complete the update Windows 8.1. We have restored the previous version of Windows on this computer.

  0xC1900101 - 0 x 40019.

  I tried to reinstall Windows 8.1 a couple of times after that. Once to disable all non-Microsoft services and disabling all startup programs. Always the same result.

  I have no antivirus software on my other system protection of Microsoft default system software.

  Any help, greatly appreciated.

  Thank you.

  I have disabled active secure boot existing starter and the update worked.  Now we get the error of watermark "secure boot not configured correctly.  But I have re-enabled secure boot and the error disappeared.

• ENVY 7640 printer all-in-one: problem software printer after updating to Windows 10

  After updating Windows 10, my HP ENVY 7640 all-in-one printing software does not open.  A dialog box appears asking if I want to install a new program.  How can I get the software of the printer to open?

  Once you upgrade your computer to Windows 10, you upgrade your printer for Windows 10?

  Go here...

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-7600-e-all-in-one-printer-series/6617267/model/6617268

  Download and install the drivers and full software.

• How to get windows 7 to scan from my HP Photosmart All In One? He's used to, now it will be not - says not detected to scan. Please help in simple language.

  My HP Photosmart all the one used for direct scanning to my computer which has Windows 7. He went offline and now works fine. But now Windows Fax Scan & custom ' work. My computer guard says that a scanner is not detected. Please help I'm not very good at this stuff! Thank you!!!

  Review HP support site, or use diagnoses of HP, a shortcut to that would probably be on your desktop (if you installed according to the instructions from HP, their cd and does not just plug the printer)

  http://WWW8.HP.com/UK/en/support-drivers.html

• Windows 7 drivers for HP Pavilion 20-b314 All in One

  I need help to find drivers Windows 7 for HP b314 20 Pavilion all in one pc, need to downgrade for a user who is not familiar with Windows 8 and must get to work as soon as possible because has no time to train...

  . Any ideas.

  Hello

  Don't forget to create the external HP recovery media doing anything.

  You will need to boot into the bios and disable secure boot, clear the quick start and enable the legacy mode. HP Secure Boot Windows 8 themes

  This model 20-b200a has similar drivers. The Cyberlink software won't be available.

  A possible I gotcha is that the video card may not work in legacy mode and Windows 7 will not work using the UEFI.

  Check with HP Support on warranty due to demotion issues.

• No Windows 7 driver for the hp officejet 5510 all in one printer?

  Hi I have an old HP OFFICEJECT 5500 SERIES ALL-IN-ONE (the model is 5510).  I bought it for my original DELL XP in 2004.  He worked especially well when I transferred to my next OS from VISTA DELL (less some functions) but the impression was very good.  Now my new DELL XPS 15z Windows 7 operating system is unable to locate a driver for it.

  What does that mean?  It's such a great printer - that is to say not one disposable.  It will not work in this environment?   I looked everywhere for a driver (on my system and on the internet).  Windows said to contact the manufacturer.

  Thank you

  Hello

  Your printer is compatible with Windows 7 and should work immediately by plugging the USB cable.

  As you have a few questions, follow the document below to get your printer working:

  http://support.HP.com/us-en/document/c01796879

  I suggest you follow How can I make sure that I always have the latest driver for OS Windows 7 first, then plug in the USB cable and check progress.

  If the problem continues without change, follow what can I do if the driver installation failed.

  Hope that helps,

  Shlomi

• Desktop all-in-one HP 2113w 19: install Windows 7 or 8 on desktop PC HP all-in-one 19-2113w...

  I need to install Windows 7 or 8 on my HP 19-2113w all-in-one desktop PC. The machine came with pre-installed Windows 8.1.

  I have a copy of Win7, but my product code is expired.

  What is the cheaper, faster and less painful way to solve this problem?

  Thank you.

  R. cline

  Hello @rcline7,

  I read your post on how you're looking to install Windows 7 or 8 on your desktop computer, and I'd be happy to help you in this case!

  To retrieve a copy supported Windows for your computer, I recommend that you follow the steps described in this document about getting a HP recovery disks or USB HP recovery disc.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• HP deskjet 3050 ALL-IN-ONE J6 has: windows 10 driver for hp deskjet 3050 has ALL-IN-one, j611 series

  After that I updated / downloaded 10 Windows on my laptop, I can't connect to my printer. It is even not appear as option in Windows, even though I made an UPDATE of Windows looking for my HP. How can I download a new driver? A new driver is available for my PRINTER HP DESKJET 3050 ALL-IN-ONE J611 SERIES a? Please don't tell me I have to buy a new printer...

  Thank you!

  Download the driver from the printer Support page:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050A-e-all-in-one-printer-series---J611/4311836/model/4311837#Z7_3054ICK0KGTE30AQO5O3KA30R1

• Windows 7 includes drivers for HP PSC 1410 all-in-one?

  I am about to replace my Office Tower (currently Windows XP) for one, with Windows 7 pro is installed.  I don't have a disk for the drivers for my printer PSC 1410 All-in-one.  Are they included in Windows 7 where can I download the free after plugging in the new Tower?

  Hello

  You can download the drivers from the followung link:

  Be sure you do not connect USB until the installation invites you to do so.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4062&product=441115&sw_lang=

• Is it possible to set up in windows 7 for my printer HP psc 1315 all in one...?

  .. .or is not possible, and it is best to think about to buy a new printer!

  I was wasting far too much time trying to set up many "good drivers" for this device and will never work ok

  My question is simple: "there is a device that works well with HP psc 1315 all-in-one Windows seven?

  Thanks in advance ;-)

  Peter

  IF this is your printer/scanner - http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=374568#N223 then there are drivers W7 32 and 64 bit available for this purpose.

  Everything on the PC concerned with your HP printer uninstall, restart the PC, then download and use the appropriate driver (W7 - 32 or 64 bit depending upon need) and see what happens then.

  Whatever it is, as its apparently supported, you're probably better asking HP if you did not already.

• Downgrade to Windows 7 Pro on HP ENVY 15 K058CA need drivers

  Win 7 installed, everything of fine, boots and runs.

  Need drivers for network, Chipset, USB and some unknowns.

  Can anyone point to them.

  Have you tried the Intel HM87 Express pilots they did not have much and drivers Intel ethernet with the same results.

  Any help greatly apprecciated under Win 7 is necessary for some questions of compartibility SW of SMB.

  -Thank you

  Ok

  Try installing the following drivers and let me know the results:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_123657_1&sp4ts.Oid=5405424

  FTP://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61263.exe

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3470&DwnldID=23109&keyword=Intel%C2%AE+smart+connect+technology&lang=eng

  For the IDT Audio.

  You see an error in the category sound and video game controller from the Device Manager? Please also install the hardware for this item ID.

  Shlomi

• HP ProBook s 4430: hp envy 5530 e - all - in - one printer prints not after windows 10

  I got Win 10 installed for a few months and have just tried to print with my HP Envy 5530 e printer. I tried a doc in Word and he showed that he was priinting, but he vanished from the queue after about 15 seconds.

  -C' is my default printer and displays "series HP Envy 5530 (network).

  -my wifi is connected

  -J' tried to unplug machine and wall & turn off wifi

  -J' tried troubleshooting, but he could not identify a problem

  -J' tried to update.

  -J' uninstalled and reinstalled with disc and I have uninstalled and reinstalled online

  -Print and scan doctor = all OK

  -Test print = print and submitted, but disappears after seconds too

  -internal print has no print

  -disabled firewall only = no print.

  What Miss me? I've never had a problem with Win 7.

  Hi rb101,

  Your suggestion to contact our assistance worked!  I had a conversation with someone, and they changed my driver to a generic driver and that's...

  Thanks a lot for all your help

• HP ENVY 4500 e-all-in-one: HELP PLEASE

  Hi, I bought the above printer and saved for the moment ink on 26/03/15 but I ran more ink and have not been sent a replacement.

  I logged contact yourselves and now despite having an email confirming registration 26/3 it would not connect me and couldn't find my contact details. I am now registered on this site for help if someone can please help me unravel the replacement of ink I need it asap

  Hello

  I've included the contact numbers for the countries where the instantaneous program of HP ink is currently available.  You should be able to discuss your account with the people of relavent in the following numbers.

  ( United States - HP Cloud Services to 1-855-785-2777) indicating that your call is on the program of instant ink) Monday to Friday from 08:00 - 23:00 and Saturday from 09:00 - 20:00

  United Kingdom - HP customer care on 0207 660 0596 (indicating your call is on the program of instant ink) Monday - Friday 08:30-18:00 (except holidays)

  France - HP Customer Service at 435-320-0969 (indicating your call is on the program of instant ink) Monday - Friday 08:00-18:00 (except holidays)

  Germany - the Customer Service HP at 069-2999-3434 (indicating your call is on the program of instant ink) Monday - Friday 08:30-18:00 (except holidays)

  Spain - HP customer care at 913 754 769 (which indicates that the call is on the program of instant ink) Monday - Friday 08:30 to 18:00 (except holidays).
  
  ( (English) Canada - HP Cloud Services to 1-855-785-2777) indicating that your call is on the program of instant ink) Monday to Friday from 08:00 - 23:00 and Saturday from 09:00 - 20:00

  ( Canada (French) - HP Cloud Services to 1-855-785-2777) indicating that your call is on the program of instant ink) Monday to Friday from 08:00 - 23:00 and Saturday from 09:00 - 20:00

• Hello, impossible to scan to PC Windows Vista HP w1707 HP Officejet Pro 8600 all-in-one...

  ... and send a scanned to an e-mail document. Copier and fax are fully functional. Computer error does not recognize the printer. They communicate in all directions. Could I miss printer software? Thanks for any help and advice, you should be able to provide. Very much appreciated.

  I solved it. Just reverse procedure. Started with the PC to communicate with the printer and all is going well, rather than having the printer to connect to the computer.

• How to eliminate the double printing using Windows Vista and the printing of a brother, all-in-One Printer, MFC 490CW wireless configuratrion?

  Example:

  NNooww iiss tthhee ttiimmee ggoooodd mmeenn ttoo ccoommee ttoo tthhee aaiidd ooff tthheeiirr ccoouunnttrryy aallll ffoorr...

  Print appears as above, except that the spacing between the characters seem to be a space of 1/2 rather than a complete space.

  Thank you

  Hello
  • When you try to print?
  • What were the changes made before the show?
  • How long have you been faced with this problem?
  You can view these methods:
   
  Method 1:
  I suggest you to check the print preview .
   
  Method 2:
  Uninstall the driver and the printer software:
  1. open devices and printers, click the Start button, and then on the start menu, click devices and printers.
  2 - Click on the printer you want to remove, click on remove the device and then click Yes.
  If you can't delete the printer, right-click again, click Run as administrator, click on remove the device and then click Yes.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on the properties of high print server of the screen and select the tab drivers, under delete evyrhing is installed as a printer except the xps document writer and send a note to the driver package.
   
  Step 2.
  Install the printer.
  Now reinstall the printer, refer to the article below to install a printer.
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers