HP ProBook s 4430: hp envy 5530 e - all - in - one printer prints not after windows 10

Similar Questions

• ENVY 5530 e-all-in-One Series: My ENVY 5530 e-all-in-one prints only two pages of a multi-page document.

  My newly installed (Jan 2015) ENVY 5530 e-all-in-one prints only two pages of a document with several pages of my HP desk top 500-123ea, windows 8.1. Message on PC "Unable to print document", it's even on Double or single sided printing.  A ran Scan doctor, OK; reloaded software and Firmware from the Hp site. He spent hours and hours of reading the elements of list of support HP; Impossible to talk online with HP. very in angry and frustrated. This HP product seems not as "fit for purpose". I will give HP Feedback after this announcement and rate accordingly. I beleve others have similar experience of this problem. HP is aware?  Is anyone out there that can help?

  We gladly invite you.

  A Roll-up update is already available since December, although it seems that the description is not being updated accordingly.

  Follow the section "get the hotfix rollup for Windows 8.1"in my previous link, which can be obtained by installing the package or by using Windows Update, this is the update that the articale refers... ".

  Shlomi

• HP ENVY 5530 e-all-in-one: printer is not to connect to the Internet wireless

  Hello

  English is my second laungage. hope you understand...

  I can print with printer through windows and Mac PC cable. but, I can not connect between rutour and the wireless printer.

  I used the Setup Wizard and found the SSID name. I typed PW. but "Not connected" is displayed.

  I print the Configuration Page from HP network.

  Live wireless

  Status on

  What else can be done using wireless printer.

  Kind regards

  MI-Ko

  Hello

  If you try to connect your printer to the router, you should make sure that wireless Direct is trurned to offshore. Direct wireless is a feature that allows you to connect a device directly to your printer without router (the printer generates its own wifi)

  Please turn off direct wireless (it's often a button on the front panel) and try to connect again.

  I have included a link below for you rprinter support page that contains the user guides that should help also.

  http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/model/5304882

• Location of default scanning? (HP and HP ENVY 15-j084ca Notebook PC ENVY 114 e - All - in - One Printer - D411c)

  I have a HP ENVY 15-j084ca Notebook PC (Windows 8-64) and HP ENVY 114 e-All-in-One Printer - D411c.

  Currently, when I scan a documents, photos, etc. from my printer on my wifi network my computer default files in the folder "My Documents" (C:\Users\***\Documents).

  Is it possible to permanently change the default location?

  When you choose to scan on my printer the implementation only allows me to choose the type of file and an additional option for scanning to e-mail directly (. File Photo), Photo to Email, file or Document to send

  I have been not able to find this option on my printer, computer, or the internet, as well as passed around departments HP many times with only this repetitive response... "This is not what we do in this Department, let me transfer you to another Department to better assist you. »

  Help?

  Hello

  From your PC, open the HP Envy 110 software and select scan a Document or Photo.

  Select the required scan shortcut selected in the front panel of the printer, and then click Advanced settings.

  Click the Destination tab, select the destination folder and validate.

  Complete analysis of the HP software, the selected location will remain as a default value in the future.

  Shlomi

• How can I reset my HP ENVY 110 e-all-in-one printer - D411a to factory settings

  How can I reset my HP ENVY 110 e-all-in-one printer - D411a to factory settings

  Hello bez002,

  To restore the factory of your printer settings:

  1. Select the key icon in the upper right of the home screen.
  2. Select Tools.
  3. Select Restore Factory Defaults and then validate

• HP ENVY 114 e-all-in-one printer output tray Extender does ' t open or close when printing

  The tray Extender out on my HP ENVY 114 e-all-in-one printer is not open or close when I print. Currently it remains open all the time so it's not the amount. It started when I had a paper jamb because transport has not opened.

  New impressive @Barkingloon 

  If you have a moment, please click the button of "acceptable Solution" on my last message (Message 2), for others in the community can find thread too in case they run into the same problem.

  Have a wonderful Monday

• HP Envy 5530 e-all-in-one: envy 5530 E cannot detect alignment page

  I'll put up a new e-all-in-one printer HP Envy 5530. I went through the installation OK, until I got to the part about the alignment of the print cartridges.  It prints the alignment page, it will copy even, so I know the scanner works. I printed several pages and they all look great.  But when I use the ink cartridge alignment tool it does not detect the alignment page in the scanner.

  Yes, it is face down on the scanner

  Yes, the cartridges are installed OK

  Yes, printing seems good

  Yes, the scanner can scan and print pages, even the alignment page

  What else to try?

  Thank you

  Well, too bad. I unplugged, moved the card to a regular wall outlet instead of a power strip, and it is turned on, ask to do a print alignment.

  I did, it printed the page, I put the page on the scanner and it completed the alignment.

  I don't know what the problem was earlier, but it worked this time.

• HP ENVY 4500 e-all-in-one printer/Mac OS 10.6 / cannot scan multiple pages in the single file/document

  Mac OS X 10.6.8

  HP Scan app 4.4.1

  In the ENVY of HP printer 4500 e-all-in-one support page for scanning with a full feature driver installed. Under "how to scan an original of several page into one file for HP Scan version 4.0 of the software. Everything is okay until after I scanned the documents and click on 'Done '. (Step 6) & click send , click the folder , name your file, and then save the file on the computer. (Step # 7)

  Is where I'm going wrong. I can't find the Format drop-down to complete steps 8 and 9.

  1. Click the dropdown Format menu, select the content , and then check the box to Save all items in a single file .
  2. Click Save .

  Hi milolo,

  Thanks for your post and welcome to the HP Forum.

  Please make sure that you select PDF or searchable PDF as the Format. You should then find a box to check the 'combined in one document.

• ENVY 5530 e-all in one

  I try to work around the use of the color on all my documents and put in place for shades of gray, but cannot find an option in the preferences for this.  It is available on this model and how to access it?

  Hello

  The good news is for the 5530 Envy that uses ink 2 tanks, 1 black and 1 HABs so you can print black ink only when one of the colors was missing. Please try:

  (a) go to set preferences,

  b click on the paper/quality tab

  (c) click on advanced

  (d) under Document options, select option "Black ink only" (drop-down menu of"grayscale Printin',

  e click OK then apply (next screen).

  Kind regards.

• HP ENVY 5530 e-all-in-one: HP ENVY 5530 e-all-in-one will print but not scan

  The material (both print & scan) worked well on OS 10.10.x but as soon as I xfr needed a MBP less 10.11.4 it stopped scanning through the HP software, but will work under Mac software scan. (The side of the printer still works fine.)

  Hi @Mrkil1o1,

  Welcome to the HP Forums! I'd love to help you to scan from your 5530 craving for your Mac. I understand from your description that it worked well when you have 10.10, but since the upgrade to 10.11 you can print but not scan.

  Let's start with resetting the printing system, uninstalling the software, repair the permissions of the drive and re - install & re-add the printer:

  Scrub / uninstall

• HP Envy 5530 e-all-in-one: copy/scanning does not work

  All the functions of the printer/scanner worked before Windows upgrade Windows 7 10.  After 'upgrade' to win 10, scanner and copier functions are kaput.

  SYMPTOMS:

  Printer funtion still works

  * Copy funtion indicates "" Now"copy" but never active scanner.  Pressing Cancel does not stop the process.

  * Manual SHUT DOWN does not work with constant "Shutting Down" message.

  * Scan to the computer and scanning to E-mail functions do not work

  * Try to run Windows scan "does not recognize the HP profile" and cannot scan using Windows 10

  ACTIONS:

  * Initially received 'C4EBA230' message on the printer screen blue with flashing icons, but a hard reset solved error

  * Have completely uninstalled & reinstalled software base three or four times of HP and HP update disc once software has detected and installed

  * Ran HP, utility for troubleshooting several times before and after reinstalls for problems of scan - driver detected every time problem.   Ignore the results of audit of pilot and proceed to the verification of scan did not work

  * Performed four resets hard to return to the firmware with parameters.

  * Tried scanning HP and Capture app (Nope - message "Device is busy" - same device is not)

  * Voltage checked the cable power and the wall outlet (OK)

  * Checked ink levels (more than one half full)

  * Searched updates firmware (not available on HP support site for want 5530)

  Seems to me that it might be mutiple problems/possible solutions:

  Machine firmware problem?  n ' any means to reinstall the current firmware via a download?

  Mechanical scanner problem? -scanner engine bad/blown bulb? -where is the nearest HP Service Center authorized Texas?

  New driver development necessary to scan to computer compatibility with Windows 10? -C' you all of the problem

  Your diagnosis?

  Hi doktor,.

• HP ENVY 5530 e-all-in-one: cancellation of registration - can I keep feeling with these cartridges?

  I'm about to cancel my subscription to instant ink I have don't print enough to justify maintaining the subscription (2 pages this month, 0 last month, you get the point). When I cancel, can I keep these cartridges and keep printing from them after the end of the billing cycle? Cartridges still have ink in there and I don't want to go out and buy new if I can continue to use these. You don't know exactly how it works.

  Hi @morgdod.

  Welcome to the Forums of HP's Support. I understand that you would like to know if you can use/keep the cartridges instant subscription after the cancellation of the instant the ink service. I would like to help.

  Instant HP ink cartridges do not work after the end of your current billing period, and you will have to go back to HP. To continue printing after the end of your billing cycle, make sure you have ink of standard replacement cartridges ready to the use of your printer.

  This link will have more information. Ink HP Instant - cancel your instant ink HP Service.

  Let me know if that answers your question. If it did, that's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• HP ENVY 114 e-all-in-one printer - D411c control panel problem

  The printer has been used for a HP Pavilion with Vista and an HP running Win 7 laptop.  It is configured on a local wireless network.

  I've had the printer for a year and I am very very happy with it, but:

  The Panel recently has stopped working properly.

  It does not complete the boot process and remains with the small blue HP graphic on the screen.

  The printer continues to print correctly on both computers.

  On Vista machine I can run the series HP Envy 110 support demand and access to ink, preferences and analysis levels correctly.

  Win 7 does not demand full support on the machine. I don't get the included links for features like 'see what's printing","Set preferences", the"estimated ink levels"and others. And I can't scan from this machine.

  I have power drove the printer a number of times.

  Is there a secret way to reset the printer, so a default configuration that could properly start whe the control panel is not available?

  I consider myself at least able, both for the work of PC and networks of intermediate level.

  I'm not aware of any HW or SW change other than the frequent patches issued by Microsoft.

  THX,

  Jim

  Hello Jim,

  I send you a private message and I would like to know if my suggestion helps.

  -Cass

• HP envy 110 series: Envy 110, HP all in one printer model 411-a

  I have a problem with my habit of the impression of my desktop HP printer.  When I click on printing the printer drop he said updated driver? I need help someone please.

  Hello

  Thank you for using the HP Forums.

  Please uninstall and reinstall the software COMPLETE features, follow these steps:

  1 uninstall the software from your computer
  2. download and save the software COMPLETE features (do not install online)

  The following resources will help you:

  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  3. install the FULL feature software "saved".

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps!

• ENVY 110 e-all-in-one printer can't find my cell phone to scan

  Whenever I try to scan to my laptop, it not only can not find. I have a HP laptop and it was working fine before, but now he can't seem to find it. I ran printing HP and doctor Scan and he said that checked everything. I opened the scan on the program function on my computer and it opens. They are both on the same network. I had the same virus protection and firewall settings since the time that I bought it. I honestly me nothing but problems with this printer since I bought it. Just after I got it, it loses the connection to my router and reset the IP address. One of the technicians helped me set up a static IP address which helped a bit, but then he did it again. So basically, now I have to reset my router and the printer almost everytime I want to use it. Another person, I talked about the cat says that my router has to be on channel 11. I made sure it was 11, but it still does the same thing. But anyway, it is connected to the network now. It's wireless printing and it is scanning to my other computer, but it does not find my cell phone. Is there something I can do? Should I uninstall and reinstall the software?

  Hello Sweetmuffins21,

  Please perform the below mentioned steps that should solve the problem.

  • Double-click the printer icon. HP printer help window opens.
  • Under the section of the ANALYSIS, are looking for to manage scanning to computer and click on it.
  • Then click on the button ACTIVATE.
  • Now try scanning using the front of the printer, it should work.

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on 'accept as Solution' if it has solved your problem, while others may find it.
  I work for HP