OfficeJet Pro 8600: new wifi protocols

Similar Questions

• HP Officejet Pro 8600: No Wifi connection between the computer laptop and HP printer

  Hi, I just added W10 os for my laptop, I was on os W7, work system very well, my printer is Office Jet Pro 8600, both laptop and printer are connected to my wireless router, but my laptop cannot find my printer, I misplaced my original disc, can anyone advise me on what it takes to please. TIA

  Hi @Rockabilly,

  I was able to locate the software you're looking for, but from your description, not having is not the software may not be the question. I will first provide you with the software, then if you continue to have problems, let me know and we can go from there.

  Printers HP Officejet Pro 8600 Plus and Premium e-All-in-One

  E-all-in-one printer, HP Officejet Pro 8600 - N911a

  Alternatively, you can also download and run the HP printer install wizard for Windows

  The HP printer for window installation wizard was created to help users download and install the latest and most appropriate HP software solution for their HP printer.

• cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

  I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

  Any help is appreciated!

  Hello NRHII,

  Welcome to the HP Forums!

  I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

  (1) turn off your printer
  (2) unplug the power cord at the back of the router
  (3) restart your computer
  (4) wait less than 60 seconds, reconnect the power cord to the router
  (5) turn the printer, wait for the computer to turn on

  The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

  1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
  2. Tap the Installer icon ( ).
  3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
  4. Tap the name of your network and then press OK .
  5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

• OfficeJet Pro 8600 Plus: is the Officejet Pro 8600 wireless compatible with the new standard AC dual routers.

  ISP is the Modem upgrade to DOCSIS 3.0 model. My current router, Linksis E 3200 is not fully compatible with the new modem, I have to upgrade to a model of AC Smart WiFi dual band.

  The wireless in this 8600 printer is compatible with the standard AC. If this is not the case, can it be upgraded via download to make the wireless compatible. Top of my head I have think.

  The wireless connection in the Officejet Pro 8600 is compatible with 802.11n connection on the 2.4 Ghz band.  Check your new router (or candidates for a new router), most routers AC will be also in charge of N connections.

• How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?

  How can I set up my new Officejet Pro 8600 more printing on paper photo 4 x 6?  I'm running on Windows 7 64 bit.

  It's strange.  Looks like you have a second paper tray and put it to the default tray.  The second paper tray only supports the types of paper that show on your list.  It's strange because unless you have purchased a second tray paper, plus model has one.  Does only the high-end model.  Other than that, only certain types of media can be duplex, so if you have double-sided printing, it can limit the selection.  I'll watch what else could be the cause and get back to you.

• My new HP Officejet Pro 8600 will not analyze superior at 300 dpi of the location of the single document.

  My new HP Officejet Pro 8600 will not scan more than 300 DPI when scanning individual photos on the glass plate. I do not use the document feeder. I use this printer wireless on an iMac and a PC.

  Hello

  You can pass the value of hp scan: launch of the demand application, select the shortcut to scan (PDF or JPG to the left) and change the resolution you want and save.

  This will send down the printer settings. So the next time you scan, the printer uses these settings.

  Good impression.

• OfficeJet Pro 8600 Plus: can not get the printer to function after installing new wireless router

  I recently changed routers from D-Link to a Netgear R6400.  I could get my desk, the laptop and the i - Pad to connect to the new network, but not my HP Officejet Pro 8600 more.  When I try to change the IP address, which is what I think I do, the screen indicates "this feature has been locked by your system administrator or the one who put up the system."  I'm the only one using this printer and I put in place originally, but I do not remember 'locking' anything.  Will you please tell me how to solve this problem, so I can use the printer again.

  Hello

  Thank you for using the HP forum.

  A suggestion that we recommend is to uninstall and reinstall the software FULL of features.

  Alternatively, you can try the doctor print and Scan?

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• My new HP Officejet Pro 8600 N911a does not allow a webscan

  My new HP Officejet Pro 8600 N911a does not allow a webscan on my laptop Dell Win7, which indicates on its Web page ¨that that the corresponding software is not installed".  I already tried in vain to install all software from the included cd, but did not find the corresponding software.  I was surprised to see that this cd does not start by itself, the single executable that I found was a setupxxx.exe and that did not include the scanning options.

  Anyone has a suggestion to solve this?

  Hello tutoke

  The Webscan must be selected in the tab of the administrator of the Embeded Web Server (EWS). See the screenshot below.

  1. Click settings
  2. Click the administrator settings
  3. Check Webscan
  4. Press on apply downstairs.

  Try to scan the image.

  

• New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.

  New Premium Officejet Pro 8600 with envelopes in Tray 1 and 8.5 x 11 in tray 2 copies only to Tray 1.  When I try to select the tray 2 in copy options, only Tray 1 appears as a choice.  How to choose tray 2 when it is not listed and do the copy default tray?

  I remember coming across this question:

  1. turn off the printer and remove the lower whole and not just the tray 2.

  2. turn on, turn off,

  3 replace the tray 2 and the power up.

  To enable tray 2 as default copy ferry. Go to the printer->-> select copy LCD display-> select settings-> a selected tray 2 as default.

• OfficeJet Pro 8600 n911g: ink level 8600 rest from scratch with new 950XL

  My black cartridge in my 8600 printer ran out of ink. I had already replaced all the colors of three cartridges with a 951XL defined, a month or two ago, and the process went smoothly as planned. Today after replacing the black cartridge, adjustment noise seemed short, and the façade is estimated ink level zero rest.

  I tried the following diagnosis:

  -Reinsert the black print cartridge

  -Reinsert all four cartridges

  -market power

  -a second new HP 950XL

  -test page

  -the print head alignment

  -clean the printhead

  -Printing HP and doctor Scan, install and run - prompted me to update software - which did not fix the problem

  Print quality seems good on the test pages. I can only assume that the printer works satisfactorily, but I prefer to resolve this problem and eliminate the uncertainty of my use of the printer. Please suggest how I might solve this problem.

  Welcome to the HP community @Huwon,

  I came across your post about the black ink cartridges that do not properly record in your Officejet 8600 more, and I wanted to comment with my suggestions and comments. I must say that you tried the troubleshooting steps I would have suggested. You can also try an update to see if that helps. If the problem persists, contact HP to see on a replacement unit.

  Click here for download of the firmware update: Firmware N911g_n HP Officejet Pro 8600

  Try a reset to full power:

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Testify of my answer by hitting the thumbs below and press the button "Accept as Solution" if I helped you reach a solution!

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• OfficeJet Pro 8600 Wifi question

  My company delivered my new of Officejet Pro 8600 with locked out wireless capability... I guess that they do not want printing wireless at the office, but I use this printer home and print to it my personal devices wireless... any advice on how to re-engage the wireless features?

  Your company would mind if the printer has been completely reset?  I'm guessing that they disables wireless and also put a password on the printer, so you cannot turn it back on.  I would call your business or if you know that you can't find in trouble do complete a reset on the printer.

  How to reset the printer is provided here.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/how-to-reset-OfficeJet-Pro-8600-plus-premium-to-factory-default/TD-p/1094005

• OfficeJet Pro 8600: I got a new modem and the router. I uninstalled the HP software, but wizzard wireless configuration is locked.

  I uninstalled the software so I could start over.  Configuration Wizzard is locked and I can not understand how to get unlock.

  Hi @bobbalou,

  Thank you for visiting the Forums of HP Support for a solution to your printer problem.

  I understand that you replaced your modem and router, but could not connect your HP Officejet Pro 8600 e-all-in-one printer to the new network, because the wireless configuration wizard is locked. I would like to help with that.

  Try to restore the default network before attempting to run the Wireless Setup Wizard.

  1. on the touch screen of the printer, press the right arrow to display the second navigation screen.

  2. press on the installation program icon.

  3. tap network, then press the default network.

  If you are able to restore the default settings of the network is should allow you to run the Wireless Setup Wizard.

  If you're locked up because he had a password set in place on the printer, you will need the password to access the server (EWS) of embedded printer online web to change the settings of the printer.

  

  Please let me know if that solves the problem, or if you need assistance.

• Using configured WiFi Officejet Pro 8600 in a location no-wifi via USB

  My Officejet Pro 8600 is used at home via WiFi.

  I want to take the printer to a location which does not have WiFi and print via the USB port.

  The installation disc (v28.8) has mutually exclusive options when you run Setup.exe,

  for the WiFi, or USB / Ethernet.  How to install a printer driver for printing via

  USB, while keeping the WiFi driver installed?

  OK I see that now when printing there is selections for 'HP Officejet Pro 8600' and

  "HP Officejet Pro 8600 (network)".  I have not seen in a first time.  Problem solved.

• Office Jet N911a 8600 Proj... HP Officejet Pro 8600.exe guard eager to install a new printer

  I just got an Officejet Pro 8600 N911a and installed out of the box with no problems... it prints, copies and scans wonderfully.

  I just downloaded this package "complete" on HP.com and that seems to work as well.  He put an icon on my desktop and programs (I use Windows 7 64-bit) which is a shortcut that points to this "C:\Program HP HP Officejet Pro 8600\Bin\HP Officejet Pro 8600.exe" - UDCDevicePage start

  The first time I used this, he showed me a page of control with options to check the ink levels, connectsion etc.  Then I rebooted, and now if I click on the icon, I get the message of Windows asking me if its ok for the program change windows (as if its about to install something) and then shows me a box that wants to connect a new printer or change the wireless settings.  I tried to run the program from the command prompt with and without the "-Start UDCDevicePage ' qualifier and it gives me the same thing.  ... Always the same restart.

  the printer works fine... just this irritating program.  any thoughts?

  Something was damaged during the restart. You need to just uninstall and reinstall the software and the drivers again.

• New HP OfficeJet Pro 8600 more - can I install and use the 2nd tray of my HP OfficeJet Pro 7700?

  I would like to install the 2nd tray of my old HP Office Jet Pro 7700 under my new of OfficeJet Pro 8600.  Can I do this?

  The 2nd of the Officejet Pro 8600 paper tray is quite different from the 2nd series printers Officejet L7700 paper tray.

  * The 2nd tray for L7700 series is compatible with: L7580, L7680, L7780, L7550, L7650, L7480, L7750, L7590 and L7555.

  Click on the link provided here to access the HP Shopping site where you can buy the tray paper 8600 2nd.  The current price is $79.99 usd.