Help! Failure - GGFXHA-5HQ5MD-MFH141 ID

Similar Questions

• BlackBerry Smartphones Help: Failure of BlackBerry® Desktop Manager

  I'll install apps I get the following

  BlackBerry® Desktop Manager could not validate your update to the BlackBerry® device.

  Validation failed because a module to add (net_rim_platform_resource__pt) is not available on the local disk

  I found a solution.

  I décliqués one of the apps I didn't use and installed a free trial at random the bbscanner

  the error disappeared

  BTW, I have a bb tour sprint

• Beach Safari infinite balls

  For several days, I had a maddening number of using Safari with El Capitan beach balls. It doesn't crash, but the % CPU in Activity Monitor jumps higher than 120% or more, before finally calm down. Then once I have start clicking on it happens again, to infinity. I've scoured several discussion forums until I found myself here. I've just updated to OS X 10.11.2 and Safari 9.0.3 without change. I tried to replace all the .db and .plists history. No help there. I tried to launch the latest version of EtreCheck, which turned into only a few red flags. By the suggestion of EtreSoft, I write all of the EtreCheck report.

  I emptied the caches of Safari and remove all items from the history. No improvement. I am reluctant to clear history and delete all my cookies, since I sort of doubt that would do anything either.

  At this point, I am of ideas. Safari is essentially unusable. I have seen so many reports of this kind of thing dating back several years and the operating systems and impossible to believe that Apple has not addressed this. Use Chrome my only other option?

  Here's what EtreCheck says:

  Problem: Beachballing

  Description:

  Beach Safari balls

  Hardware Information: ⓘ

  iMac (27-inch, mid 2010)

  [Data sheet] - [User Guide] - [Warranty & Service]

  iMac - model: iMac11, 3

  1 2.93 GHz Intel Core i7 CPU: 4 strands

  16 GB expandable RAM - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1333 MHz

  0/DIMM1 BANK

  OK 4 GB DDR3 1333 MHz

  BANK 1/DIMM1

  OK 4 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  ATI Radeon HD 5750 - VRAM: 1024 MB

  iMac 2560 x 1440

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - time since started: about one day

  Disc information: ⓘ

  ST31000528AS disk1: (1 TB) (rotation)

  EFI (disk1s1) : 210 MB

  Time Machine 2015 (disk1s2) / Volumes/Time Machine 2015: 999.21 GB (275,50 GB free)

  HD (disk1s3) [recovery] recovery: 650 MB

  OPTIARC DVD RW AD - 5680H)

  SAMSUNG SSD 850 EVO 1 to disk0: (1 TB) (Solid State - TRIM: No.)

  EFI (disk0s1) : 210 MB

  Macintosh HD (disk0s2) /: 999,35 (Go 320,95 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  USB information: ⓘ

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  Brother HL-2040 series

  Western Digital my book 1230 3 TB

  Triple Double (disk4s1) Volumes/Triple Double: 3,00 (1.17 free) tuberculosis

  Western Digital my book 1170 3 TB

  disk8s1 (disk8s1) : 210 MB

  Triple threat (disk8s2) Volumes/Triple Threat: 3,00 TB (46,26 GB free)

  Western Digital my book 1140 2 TB

  EFI (disk5s1) : 210 MB

  Volumes/MASTER MASTER ARCHIVES (disk5s2): 2,00 (1.16-free) tuberculosis

  OWC Mercury Elite-AL 400/USB2.0 2 TB SATA

  EFI (disk6s1) : 210 MB

  2 to Macintosh HD (disk6s2) / Volumes/2 TB Macintosh HD: 2.00 TB (125,22 GB free)

  Tablet PTK-640

  Generic USB2.0 - CRW 8,04 GB

  ROOSTER (disk7s1) / Volumes/ROOSTER: 8.03 GB (7.25 GB free)

  PNY Technologies USB 2.0 FD 31,94 GB

  USB20FD (disk9s1) / Volumes/USB20FD: 31,94 (GB 31.92 free)

  Western Digital external HDD 1 TB

  Elements (disk3s1) / Volumes/items: 1.00 TB (418,26 GB free)

  Card reader Apple

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Firewire information: ⓘ

  OWC OEM SATA device 00 400mbit - 400mbit max

  EFI (disk2s1) : 210 MB

  OS X 10.9 Mavericks install Disk (disk2s2) / Volumes/OS X 10.9 Mavericks installation disc: 749,30 (Go 347,01 free)

  HD (disk2s3) [recovery] recovery: 650 MB

  Guardian: ⓘ

  Any where

  Unknown files: ⓘ

  / Library/LaunchDaemons/com. Cisco.AnyConnect.vpnagentd.plist

  /Library/LaunchAgents/org.glimmerblocker.Installer.plist

  ~/Library/LaunchAgents/com. DxO.OpticsPro10LaunchAgent.plist

  /Library/LaunchDaemons/com.Quark.QXPHelper.plist

  ~/Library/LaunchAgents/com.imobie.silentcleanserver.plist

  /Library/LaunchDaemons/org.glimmerblocker.proxy.plist

  / Library/LaunchAgents/com. Cisco.AnyConnect.gui.plist

  / Library/LaunchDaemons/com. Oracle.JavaInstallHelper.plist

  / Library/LaunchDaemons/com. CrashPlan.Engine.plist

  9 unknown files found. [Check files]

  Kernel extensions: ⓘ

  / Applications/Capture One.app

  com [no charge]. Leaf.driver.LeafFwXDriverMatcher (1.2.0d1) [Support]

  / Applications/MacX Video Converter Pro.app

  com.macxdvd.driver.goodSysAudioCapture [no charge] (1 - 10.10 SDK) [Support]

  /Applications/PMHMac.app

  [no charge] com.sony.driver.dsccamFirmwareUpdaterType00 (1-10.5 SDK) [Support]

  / Applications/TechTool Pro 8. app

  [no charge] com.micromat.driver.spdKernel (1 - SDK 10.11) [Support]

  [no charge] com.micromat.driver.spdKernel - 10-8 (1 - SDK 10.11) [Support]

  / Library/Extensions

  [loading] at.obdev.nke.LittleSnitch (4356 - SDK 10.8) [Support]

  [loading] com.globaldelight.driver.Boom2Device (1.1 - 10.10 SDK) [Support]

  com.Wacom.kext.FTDI [no charge] (1 - 10.10 SDK) [Support]

  / System/Library/Extensions

  com [no charge]. Belcarra.iokit.USBLAN_netpart (3.1.1 - 10.6 SDK) [Support]

  com [no charge]. Belcarra.iokit.USBLAN_usbpart (3.1.1 - 10.6 SDK) [Support]

  com [no charge]. RemoteControl.USBLAN.usbpart (3.1.1 - SDK 10.7) [Support]

  com.Wacom.kext.wacomtablet [no charge] (6.3.10 - 10.9 SDK) [Support]

  com.wdc.driver.1394HP [no charge] (1.0.11 - 10.4 SDK) [Support]

  com.wdc.driver.1394_64HP [no charge] (1.0.1 - 10.6 SDK) [Support]

  [no charge] com.wdc.driver.USB - (1.0.3) [Support] 64HP

  [no charge] com.wdc.driver.USBHP (1.0.14) [Support]

  net.telestream.driver.TelestreamAudio [no charge] (1.1.0 - 10.8 SDK) [Support]

  ~/Library/services/ToastIt.service/Contents/MacOS

  [no charge] com.roxio.TDIXController (2.0) [Support]

  / Volumes/OS X 10.9 Mavericks install Disk/Applications/DiskWarrior.app

  [no charge] com.alsoft.Preview (5-10.5 SDK) [Support]

  Launch officers: ⓘ

  [operation] at.obdev.LittleSnitchUIAgent.plist [Support]

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [failure]... com.adobe.ARMDCHelper.cc24aef4a1b90ed56a [Support] plist

  [operation] com.adobe.AdobeCreativeCloud.plist [Support]

  [loading] com.cisco.anyconnect.gui.plist [Support]

  [loading] com.divx.dms.agent.plist [Support]

  [loading] com.divx.update.agent.plist [Support]

  [operation] com.micromat.TechToolProAgent.plist [Support]

  [loading] com.oracle.java.Java - Updater.plist [Support]

  [operation] com.sony.SonyAutoLauncher.agent.plist [Support]

  [operation] com.wacom.wacomtablet.plist [Support]

  [loading] org.glimmerblocker.installer.plist [Support]

  Launch demons: ⓘ

  [operation] at.obdev.littlesnitchd.plist [Support]

  [loading] com.adobe.ARMDC.Communicator.plist [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist [Support]

  [operation] com.adobe.adobeupdatedaemon.plist [Support]

  [loading] com.adobe.agsservice.plist [Support]

  [failure] com.adobe.fpsaud.plist [Support]

  [operation] com.cisco.anyconnect.vpnagentd.plist [Support]

  [failure] com.crashplan.engine.plist [Support]

  [loading] com.macpaw.CleanMyMac2.Agent.plist [Support]

  [operation] com.macpaw.CleanMyMac3.Agent.plist [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist [Support]

  [operation] com.micromat.TechToolProDaemon.plist [Support]

  [loading] com.microsoft.office.licensing.helper.plist [Support]

  [loading] com.microsoft.office.licensingV2.helper.plist [Support]

  [loading] com.oracle.JavaInstallHelper.plist [Support]

  [loading] com.oracle.java.Helper - Tool.plist [Support]

  [loading] com.quark.QXPHelper.plist [Support]

  [loading] com.quark.quarkupdate.plist [Support]

  [loading] com.rogueamoeba.instanton - agent.plist [Support]

  [operation] com.synium.cleanappdaemon.plist [Support]

  [operation] com.timesoftware.timemachineeditor.backup - auto.plist [Support]

  [loading] com.timesoftware.timemachineeditor.helper.plist [Support]

  [loading] net.sourceforge.MonolingualHelper.plist [Support]

  [operation] org.glimmerblocker.proxy.plist [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [loading] com.adobe.ARM. [...]. plist [Support]

  [operation] com.c - command.SpamSieve.LaunchAgent.plist [Support]

  [loading] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]

  [loading] com.dxo.OpticsPro10LaunchAgent.plist [Support]

  [loading] com.imobie.silentcleanserver.plist [Support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist [Support]

  [loading] com.vladalexa.MagicPrefs.plist [Support]

  Items in user login: ⓘ

  iTunesHelper hidden Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Application of aerodynamic profile (/ Applications/Airfoil/Airfoil.app)

  PTHPasteboard Application (~/Library/PreferencePanes/PTHPasteboard.prefPane/Contents/Resources/PTHPastebo ard.app)

  Request for DiskWarriorDaemonStarter (/ Applications/DiskWarrior.app/Contents/Helpers/DiskWarriorStarter.app)

  CD (CD Helper.app /Applications/CrossOver.app/Contents/Resources/CrossOver) crossOver additional Application software

  Audio Hijack 3 Annex Helper hidden Application (/ Library/Application Support / Audio Hijack/Audio Hijack 3 Annex Helper.app)

  Opt for the Facebook Application (/ Applications/Go for Facebook.app)

  Application of Keyboard Maestro (Keyboard Maestro.app/Applications /)

  Request for JDownloader2 (~/bin/JDownloader 2.0/JDownloader2.app)

  Tri-BACKUP 7 Launcher Application (/ Applications/Tri-BACKUP 7.app/Contents/Resources/Tri-BACKUP 7 Launcher.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Pole 2 Application (/ Applications/Boom 2.app)

  CrashPlan bar menu, UNKNOWN (missing value)

  Printer Pro Desktop Application (/ Applications/Printer Pro Desktop.app)

  Other applications: ⓘ

  [operation] 2BUA8C4S2C.com.agilebits.onepassword - osx-helper

  [operation] com.adobe.acc.AdobeDesktopService.603872.7D3853D0 - 15AC-48FA-80 a 5 LSSZ-85E6C2DA6E3C

  [ongoing] com.Adobe.accmac.603232

  [operation] com.apple.xpc.launchd.oneshot.0x10000003.Little Snitch Network Monitor

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000007.SpamSieve

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000008.Google Chrome

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000a.SpamSieveHelper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000010.cookie

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000013.Malwarebytes Anti-Malware

  [operation] com.apple.xpc.launchd.oneshot.0x10000014.CleanMyMac 3

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000015.JavaApplicationStub

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000016.Airfoil

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000017.COG

  [operation] com.apple.xpc.launchd.oneshot.0x1000001a.iData 3

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000001b.Keyboard Maestro

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000001c.JavaApplicationStub

  [operation] com.apple.xpc.launchd.oneshot.0x1000001e.Keyboard Maestro Engine

  [operation] com.apple.xpc.launchd.oneshot.0x10000020.CleanMyMac 3 Menu

  [operation] com.apple.xpc.launchd.oneshot.0x10000021.Boom 2

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000026.MagicPrefs

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000002e.EtreCheck

  [ongoing] com.codeweavers.crossover CD helper.853152

  com.fiplab.fbloginhelper [loading]

  [ongoing] com.fiplab.goforfacebook.226912

  com.globaldelight.Boom2.872992 [loading]

  [ongoing] com.globaldelight.Boom2Daemon

  com.macpaw.CleanMyMac3.Menu.228192 [loading]

  [ongoing] com.pth.PTHPasteboard.app.216672

  [ongoing] com.readdle.Printer_Pro_Desktop.132512

  com.rogueamoeba.Airfoil.162592 [loading]

  [ongoing] com.rogueamoeba.audiohijack3.schedulehelper.218592

  com.stairways.keyboardmaestro.Editor.102112 [loading]

  com.sweetpproductions.Cookie.Helper [failure]

  [ongoing] com.vladalexa.MagicPrefs.MagicPrefsPlugins.190432

  [ongoing] com.wacom.TabletDriver.221792

  [ongoing] com.wacom.WacomTouchDriver.221152

  org.jdownloader.Launcher.208672 [loading]

  Plug-ins Internet: ⓘ

  PMCADownloader: Version: 1.2.1998.896 - SDK 10.5 [Support]

  OVSHelper: Version: 1.1 [Support]

  Default browser: Version: 601 - SDK 10.11

  AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Support]

  WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Support]

  AdobeAAMDetect: Version: 3.0.0.0 - SDK 10.9 [Support]

  AdobePDFViewerNPAPI: Version: 15.009.20069 - SDK 10.8 [Support]

  DivX Web Player: Version: 3.5.0.5 - SDK 10.10 [Support]

  FlashPlayer - 10.6: Version: 20.0.0.286 - SDK 10.6 [Support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.286 - SDK 10.6 [Support]

  PepperFlashPlayer: Version: 20.0.0.286 - SDK 10.6 [Support]

  SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 [Support]

  AdobePDFViewer: Version: 15.009.20069 - SDK 10.8 [Support]

  GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Support]

  Silverlight: Version: 5.0.61118.0 - SDK 10.6 [Support]

  JavaAppletPlugin: Version: 8 Java 66 update build 17 check version

  User Plug-ins internet: ⓘ

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]

  iGetterScriptablePlugin: Version: 2.8.8 [Support]

  3rd party preference panes: ⓘ

  Akamai NetSession preferences [Support]

  Flash Player [Support]

  GlimmerBlocker [Support]

  Java [Support]

  MagicPrefs [Support]

  PTHPasteboard [Support]

  PTHVolume [Support]

  Preferences update Quark [Support]

  TechTool Protection [Support]

  WacomTablet [Support]

  X - Rite device Services [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Macintosh HD: Disc size: 999,35 GB disc used: 678,39 GB

  Destinations:

  Time Machine 2015 [Local]

  Total size: 999,21 GB

  Total number of backups: 1

  An older backup: 14/01/16, 01:18

  Last backup: 14/01/16, 01:18

  Backup disk size: too small

  Backup size GB 999,21< (disk="" used="" 678.39="" gb="" x="">

  Top of page process CPU: ⓘ

  9% JavaApplicationStub (2)

  6% Google Chrome Helper (9)

  4% WindowServer

  3% coreaudiod

  3% Google Chrome

  Top of page process of memory: ⓘ

  1.15 GB kernel_task

  1.01 GB Google Chrome Helper (9)

  885 MB JavaApplicationStub (2)

  459 MB softwareupdated

  410 MB go to Facebook

  Virtual memory information: ⓘ

  3.21 GB of free RAM

  13 h 00 GB used (caching of 4.68 GB) of RAM

  237 MB used Swap

  Diagnostic information: ⓘ

  January 19, 2016, 06:05:49 PM/Library/Logs/DiagnosticReports/CleanApp Daemon_2016-01-19-180549_ [redacted] .crash

  com Synium.cleanappdaemon - Library/Application Support/CleanApp/CleanApp Daemon.app/Contents/MacOS/CleanApp demon

  January 19, 2016, 05:03:30 PM/Library/Logs/DiagnosticReports/WacomTabletDriver_2016-01-19-170330_ [redacted]. Crash

  PRODUCT_IDENTIFIER - / Library/Application Support/Tablet/WacomTabletDriver.app/Contents/MacOS/WacomTabletDriver

  January 19, 2016, 05:03:19 PM/Library/Logs/DiagnosticReports/WacomTabletDriver_2016-01-19-170319_ [redacted]. Crash

  January 19, 2016, 17:02:40 self-test - spent

  January 19, 2016, 17:00:11 pm /Library/Logs/DiagnosticReports/AdobeCRDaemon_2016-01-19-170011_[redacted].cras

  / Applications/utilities/Adobe Creative Cloud / * / Core Sync.app/Contents/Frameworks/AdobeCrashReporter.framework/Versions/A/AdobeCRDae mon.app/Contents/MacOS/AdobeCRDaemon

  January 19, 2016, 17:00:10 pm /Library/Logs/DiagnosticReports/AdobeCRDaemon_2016-01-19-170010_[redacted].cras

  / Library/Application Support/Adobe / * / Adobe Service.app/Contents/Frameworks/AdobeCrashReporter.framework/Versions/A/AdobeCR Office Daemon.app/Contents/MacOS/AdobeCRDaemon

  January 19, 2016, 17:00:09 PM /Library/Logs/DiagnosticReports/AdobeCRDaemon_2016-01-19-170009_[redacted].cras

  / Applications/utilities/Adobe Creative Cloud / * / emon.app/Contents/MacOS/AdobeCRDaemon creative Cloud.app/Contents/Frameworks/AdobeCrashReporter.framework/Versions/A/AdobeCRDa

  January 19, 2016, 04:36:01 PM/Library/Logs/DiagnosticReports/CleanApp Daemon_2016-01-19-163601_ [redacted] .crash

  You have so much garbage on your computer, I don't know how it still turns on.  Frankly, if I were you, I do a thorough cleaning of the hard drive and start over from scratch.  I say it is because of the following:

  [loading] com.macpaw.CleanMyMac2.Agent.plist [Support]

  [operation] com.macpaw.CleanMyMac3.Agent.plist [Support]

  com.macpaw.CleanMyMac3.Scheduler.plist [loading] [Support]

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  com.macpaw.CleanMyMac3.Menu.228192 [loading]

  Simply uninstall that garbage does not remove completely all traces of it from your hard drive, this is why you must completely wipe your hard drive.  Who will ensure that he is gone.  Never, never, NEVER put insidious nonsense like this on your computer again.

• Help to the failure of disc-Etrecheck

  Hi, I and iMac late 2009 and all of a sudden to SBOD every 5 minutes. At the Etrecheck test and here are the results.

  EtreCheck version: 2.9.11 (264)

  Report generated 2016-04-29 00:53:13

  Download https://etrecheck.com EtreCheck

  Time 05:12

  Performance: average

  Click the [Support] links to help with non-Apple products.

  Click the [details] links for more information on this line.

  Click [delete] to remove the adware.

  Problem: Beachballing

  Hardware information: ⓘ

  iMac (27-inch, late 2009)

  [Technical details] - [User Guide] - [warranty & Service]

  iMac - model: iMac11, 1

  1 2.66 GHz Intel Core i5 processor: 4 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1067 MHz

  0/DIMM1 BANK

  Vacuum

  BANK 1/DIMM1

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  ATI Radeon HD 4850 - VRAM: 512 MB

  iMac 2560 x 1440

  System software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since the starting time: 7 hours

  Disk information: ⓘ

  ST1000DM003-1CH162 disk0: (1 TB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  HD (disk0s2) /: 999,35 go-go (691,95 free) - 15 errors

  Drive failure!

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GA11N)

  USB information: ⓘ

  Western Digital My Passport 070 has 499,41 GB

  EFI (disk1s1) < not mounted >: 210 MB

  EDU (disk1s2) / Volumes/EDU™™: 499,06 GB (14.79 GB free)

  Card reader Apple

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. 16,08 GB IPod

  disk3s1 (disk3s1) < not mounted >: 254 KB

  IPod to iPod (disk3s2) / Volumes/Edu edu: 16,08 GB (1.31 GB free)

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  Configuration files: ⓘ

  / etc/hosts - Count: 28

  Goalkeeper: ⓘ

  Mac App Store and identified developers

  Adware: ⓘ

  / Library/Application Support/Conduit

  An adware file found. [Remove]

  Kernel Extensions: ⓘ

  / Library/Extensions

  com [loading]. Perfect.Driver.SystemAudioRecorder (1.1.0 - SDK 10.9 - 2016-04-05) [Support]

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 157 tasks Apple

  [operation] 73 tasks Apple

  Demons of launch system: ⓘ

  [loaded] 44 tasks Apple

  [loading] 152 tasks Apple

  [operation] 92 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-03-18) [Support]

  [loading] com.adobe.CS5ServiceManager.plist (2014-01-10) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2014-05-04) [Support]

  Launch of the demons: ⓘ

  [loading] com.adobe.SwitchBoard.plist (2014-01-10) [Support]

  [loading] com.adobe.fpsaud.plist (2016-04-15) [Support]

  com.Apple.aelwriter.plist [loading]

  [loading] com.macpaw.CleanMyMac2.Agent.plist (2013-04-12) [Support]

  [failure] com.magican.castle.plist (2011-12-05) [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist (2016-04-28) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2014-05-04) [Support]

  [loading] net.sourceforge.MonolingualHelper.plist (2013-12-18) [Support]

  [operation] rapiback.plist (2012-12-07) [Support]

  Launch User Agents: ⓘ

  [loading] com.adobe.ARM. [...]. plist (2015-12-01) [Support]

  [operation] com.lastpass.LastPassHelper.plist (2016-01-05) [Support]

  User login items: ⓘ

  Workflow application (/ Applications/Flux.app)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox application (/ Applications/Dropbox.app)

  Other applications: ⓘ

  com.trendmicro.ATLoginItemHelper [loading]

  [ongoing] com.trendmicro.DrCleaner.67232

  net.freemacsoft.AppCleaner-[ongoing] SmartDelete

  [ongoing] org.herf.Flux.96672

  [loading] 410 tasks Apple

  [operation] 183 tasks Apple

  Uninstall CleanMyMac2. It's a scam. It is dangerous because it can erase parts of your operating system and your Mac out of use. It may also cause corruption of the disk directory, leading to data loss.

  Once you get rid of CleanMyMac2, rerun the report EtreCheck. When you post the next report please publish the entire report instead of just part of it. With the small part that you posted this time most of the most important parts were missing.

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• Compaq Presario SR5130NX: Cannot start Windows Vista after failure - HELP!

  Hello! My building has undergone a complete failure so 4 days ago I used it. Power resumed 3 hours later, but I was not able to log on since.
  
  
  
  
  
  Normally, I turn on my PC, and about 30 seconds later, a window pops up asking you my password. After entering it, the PC come by my office. Now, when I turn on the PC, it brings me to a blue screen with a mouse cursor in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  When I press F8 during the boot process and choose an option from the window "Advanced Boot Options", I still can't start my computer normally.
  
  
  
  
  
  Here's the "Advanced Boot Options" I tried, after consultation with my brother a little more PC-savvy:
  
  
  
  
  
  1 repair your computer - after I see my black screen that is usual with the words "Microsoft Corporation" under the green bars that scroll from left to right for about 15 seconds, a blue screen appears with the mouse pointer in the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  2 mode safe - while the PC display several files on start up and down, it stops on "Loaded: \windows\system32\drivers\disk.sys" for about 20 seconds, then proceeds to a black screen with the words "Safe Mode" in the 4 corners and the mouse cursor at the Center (which I can move), but there is nothing to click on.
  
  
  
  
  
  3 safe mode with network - see "Safe Mode" above.
  
  
  
  
  
  4 safe mode with command prompt - see 'Safe Mode' above.
  
  
  
  
  
  5 last known good Configuration (Advanced) - see "repair your computer" above.
  
  
  
  
  
  6 start Windows normally - see "Repair your computer" above.
  
  
  
  
  
  7 debug mode - see "Repair your computer" above.
  
  
  
  
  
  I downloaded a DVD recovery based on Linux in knopper.net, allowing me to access important files, which I copied from the desktop to an external hard drive (4.1 GB iso file).
  
  
  
  
  
  PC Windows XP of my brother has a recovery disk, but my Windows Vista PC did not come with one. I've seen a few paid versions, but looked resources due to cool weather and free shipping.
  
  
  
  
  
  I can't tell if I have the 23-bit or the 64 bit version of Windows Vista, so I downloaded both versions of an open source sourceforge.NET startup repair, which I burned on 2 DVDs. After you run the startup repair program using two DVD, the diagnostic results have been uploaded online at ubuntu.com for review and technical analysis. Here are the links:
  
  
  
  
  
  http://Paste.Ubuntu.com/16018001/
  
  http://Paste.Ubuntu.com/16019372/
  
  http://Paste.Ubuntu.com/16040380/
  
  
  
  
  
  The last report ended with the words "start managed to fix...".  You can now restart your computer. "But I always encounter a blank screen (black or blue) when I try to log on to my PC.
  
  
  
  
  
  Here are my details of PC, if it is useful:
  
  
  
  
  
  Desktop Compaq Presario SR5130NX
  
  Serial number: [personal information]
  
  Product number: GC667AA
  
  Warranty end date: October 5, 2013 (according to Compaq/HP.com)
  
  
  
  http://support.HP.com/us-en/product/Compaq-Presario-SR5100-desktop-PC-series/3436764
  
  
  
  
  
  Thanks for any help you can provide.

  Hello

  Since you already have KNOPPIX I try Gparted and use it to 'clean up' the score because it will stop in an impure State.

  NTFS

  [1]

  [11]

  NTFS-3 g / important

  GParted will try.

  Also, I would consider the old problem with fat systems, floppy disks etc. which sometimes a copy of sys files from a floppy disk to a hard drive has reactivated a bootable system.

  So, if system files have been damaged, then replace them since a Setup disk.  Because he goes to options, what kind of work.

  https://en.Wikipedia.org/wiki/Windows_Vista_startup_process

  • Windows Boot Manager (Bootmgr.exe)

  • Windows operating system loader (Winload.exe)

  • Recovery of Windows loader (Winresume.exe)

• Need help to avoid data loss on a corrupt and/or failure to hard drive

  I don't know what happened. One minute I'm surfing the web and listening to music on iTunes. Then out of nowhere he had a sudden failure. Changed not long at all, but now when I try to turn on my computer, it starts normally but then shortly after that the chime and the apple logo appear, if a progress indicator yet that I've never seen before today. Until the progress bar is still the size of my little finger nail, the computer turns off just. I started in recovery mode and run disk check and repair utility. Make sure the disc is not far off when he said something like - disc cannot be checked completely. Disk needs to be repaired. So when I click on the repair disk, it works only for maybe a minute before it comes up saying - utility disk can't repair the disk. Upwards from your many possible files, reformat the drive and restore your backed up files. So obviously it's not good. What are my options and can I do to avoid losing data that is not already saved? I have a lot of things that have not been backed up and lose some of them would be pretty damning. That's my main goal; data loss as little as possible. My computer is an iMac 2012 end Mavericks 10.9.5 running.

  Thank you.

  You do not have a current backup? If this is not the case, your only real option may be to pay a data recovery company and see if they can help you. Which can be very expensive.

• failure of restoration of 7201tx dv7 help im ready to hit it with a hammer and fix it forever

  My DV7 7201tx fails to restore it all goes the way to restart and loading of software etc. and even in windows 8, but only once and then it tells me that the restoration failed and locks the admin VAC and from there it just request the recovery media every time the computer starts, and it's like it goes , it will not go in the bios setings it will not choose a different boot device, it won't do anything except ask the media to restore which I give, but it does nothing. After the call to support the guy on the ph HP tells me that my restore media is defective. If I order and get the complete set of recovery DVD and try again with the same result. I forgot to mention to recover all over again, I have to remove the hard drive and put it in my Acer and then boot from a live cd of ubuntu and use Gparted to format the drive, so I can go through the whole process again... with the same results. I tried so many times now with the same result. Strange thing is I can load on my copy of win7 and it works fine, I can load on linux and it works fine, but try and load the media that come with the laptop and it's a total failure... This lappy is only 2 months old and im ready to cut my losses and smash with a hammer... This is my last resort to operate properly with the system, it came with... not that there will be a new vid on youtube to destroy me this laptop... Thank you and please someone HELP

  you are a man of legend... He worked freekin, the restoration went as it should have, and I have my computer back to factory settings... You saved my lappy to get a severe beating... awesome

• Maintains C7280 ink system failure 0xc19a0035 error... Help!

  Hello, I've owned this printer c7280 for three years. Lately, my printer has received periodic errors preventing any impression until I have shut down and restart. The error message reads:

  Ink system has failed. Cannot copy, receive faxes or print. Refer to the printer documentation.

  Error: 0xc19a0035

  Stop the power, then on again.

  When I reboot, printers works fine for anywhere between a few minutes to an hour before this same message back to the top. Sometimes, when the printer is not used at all, it suddenly shows error message. The moment that I think is random. Other times, when I try to print from my computer, the error message appears on the printer. I am still able to print pages, but I have to restart the printer if the error appears.

  How can I fix it? Any help will be greatly appreciated!

  Here is a link that will help you on "ink system failure".
  http://goo.GL/V2qlP

• Help with identification code of failure

  My product ID is: G9D66UA #ABA (HP laptop, 15). I dropped this laptop, after which he worked always, but rather fitfully. After a reboot, it came to a blue screen with a message saying it was running the diagnosis and try to solve the problems and said "it may take more than an hour". After approxamately 16 hours, the same blue screen message. I subsequently pressed F2 on startup, ran some tests and the ID of the next failure came to each test ran: can RTTSMG-77K7MS-XD7V6J-60XJ03 someone please tell me what this failure code. Also, what are my repair and above all, options recovery data (unfortunately no recent backup)? Any help understand this failure identification code would be greatly appreciated, EE

  Whenever the short hard drive DST test fails with 24 digits failure ID, which indicates that the hard drive has failed and that needs to be replaced to solve the problem

  This problem could be due to an Application or a driver conflict, virus issues, corruptions of files due to incompatible applications, incorrect judgments, update failures due to conflicts, mounted sudden power so portable, sudden falls etc...

  HP will offer a replacement HDD if the laptop warranty is Active, otherwise you can buy a SATA hard drive in a nearby retail store

  Please make sure that you get at least equal as long as the original one in order to use recovery disks. If you need you can buy a bigger, but not smaller hard drive capacity. For example, if you have a 500 GB hard drive you can improve it to 750 GB hard drive, but not 320 GB hard drive

  Please try the troubleshooting below indicated once the steps:

  Step 01. Remove the battery and unplug the power adapter AC.

  Step 02. Press and hold the power button for more than 30 seconds

  Step 03. Plug the AC power adapter / (leave the battery for now)

  Step 04. Press the power button and check if the unit is operating normally

  If the steps listed above is not enough, then you can try reinstalling the hard disk on your laptop

  If the problem persists again please Contact HP if your HP laptop is under warranty, HP could replace the hard drive and provide recovery media to restore the operating system to factory after the replacement (if you have not yet created recovery disks/USB support)

  Note: Back up all personal data on an external drive if possible. Otherwise, you can connect the HDD defective via SATA USB adapter with another PC or a PC even after replacing the HARD drive & put in place of the operating system and try to copy / retrieve files. You can also check out the link below for additional help

  http://www.WikiHow.com/recover-data-from-the-hard-drive-of-a-dead-laptop

  Please click on the link in order to identify, prevent, diagnose & recover against any failure to drive on HP Portable Hard Drives & Solid State Drives:

  http://h10032.www1.HP.com/CTG/manual/c02876562.PDF

  You can check your warranty here to check the status and click here to order a new hard drive

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL 84

  Although I am an employee of HP, I speak for myself and not for HP

• Pavilion dv6: failure of memory, help!

  Hello world

  I had some memory problems lately, including many blue screens with 'MEMORY MANAGEMENT' listed as the problem. I ran a test of memory by pressing F10 at startup for the area of memory and the test failed in about 2 seconds after the start. I got the following information:

  Failure ID: RGFTMU-5MN7K3-MFP556-406903

  Product ID: LW260UAR #ABA

  According to me, one of my chips of memory is damaged, but I do not know how to access physically to replace. Help, please!

  It's 2 GB 1333 MHZ PC3 - 10600 DDR3 SDRAM SODIMM

  You can replace it with a 4 gig of same type and speed. East - another module the same? The only thing you lose by mixing module sizes is operation "dual channel" which is a bit faster and lose would be a compromise to have more RAM.

  It would be a like kind replacement:

  http://www.eBay.com/ITM/like/231033893993?lpid=82&CHN=PS

  That would be an upgrade to a 4 GB module.

  http://www.eBay.com/ITM/4GB-DDR3-1333-MHz-PC3-10600-single-stick-SODIMM-laptop-notebook-RAM-memory-204p-/361150227991?PT=LH_DefaultDomain_0&hash=item54163b2617

  You don't want to try to stay with the same density memory; that is 4 blocks on one side. It's a little unusual for HP high density (4 blocks) RAM in their laptops, it is usually 8 block or low density. That's why I'm asking if the other module is the same.

  If it's 'the Answer' please click on 'Accept as SOlution' to help others find it.

• B210e Inksystem failure, Tower works to solve after cleaning the heads. Does not help

  Currently usinga B210e printer, had a paper jam and removed the jam.  Now I have an error message saying: ink system failure

  Complete guide to troubleshooting by HP, clean same head, back and have always system failure message ink at the same time to activate and deactivate the message that has no effect after hours of frustration.  Have carefully inspected printer and cleaned the printer head prepares and then says turn of and on.  Removed wall taken elctrical and still nothing.  Will you please help if you can because I'm about to throw the printer in an eighteen wheels.

  Thank you

  Bill

  [Personal information]

  Hi Wilcodd,

  I understand that your printer has an alphanumeric error message.  An alphanumeric error message means that your printer has a hardware problem.  If the steps in the document below are not able to resolve your problem, then you need to think to replace your printer.

  Alphanumeric error

  Let me know how it goes.

• My Outlook Express is not send my emails or have the recoil of the false failure error messages... Who can help me?

  Spent many hours on the phone with technical support of at & t reset my email ID and password.  My mail to yahoo at & t sending and reception, but the same message generates a Mailer Daemon failure notice when sent from Outlook Express for XP. at & t said that there is a Microsoft bug that they cannot solve. Who can help me to solve this problem that just started last night after years of functioning? Please contact me at * address email is removed from the privacy *. Thank you.

  Why always a message in Oulook Express that the recipient of this message is not digitally signed, and then another one saying unencrypted and I click send anyway. How can I remove all this and just be able to send directly to who I want? When Outlook is genrating and alert error there are no detaisl provided on the error.

  Start over.  First eliminate interference antivirus (see www.oehelp.com/OETips.aspx#3).  After that go to file | Identities and editing and new identity.  Set up your e-mail account to the$ T, and then use the settings they specify on their website for OE and also told you to support.  (OE can connect and send to THE$ T, there is therefore no clear 'bug' with OE towards them).  See if it works then.

  Steve

• Moving from one machine to another HARD drive because of hardware failure, need to reactivate. Need help.

  Trying to help someone, their Compaq PC dies M/B or failure of the CPU. I am replacing a similar age of old IBM ThinkCentre o. Both machines have a valid XP license attached, the Compaq has XP Home, IBM has XP Pro. When installing the IBM HARD disk, I get the message that it must be enabled before it can connect, activation fails try to use the automated system, and when I called and tried to talk with a MicroSmurf of India, the female [explitive omitted] disconnected the call before I could try to explain the situation. (Both for customer service).

  I need to know how to get this thing to validate and let me log, because, at the very least, I kinda need to run the file and Settings Transfer Wizard so everything works out on an external drive.

  I tried to use the Hack on MyDigitalLife, Yes, I know, designed for crackers, but it is legitimate, but the tool it is infected with a Trojan, so I had to spend.

  Any help would be greatly appreciated. Remember that here, there is no attempt to violate the license: the 'new' machine has a valid license attached, the OS just needs to be informed of such.

  Thank you

  Licenses on these machines are more likely to OEM licenses and so are related to the first machine to which they were installed on.  So, when your Compaq is dead, then no license.  What you need to do is install the Compaq drive has failed as an extra drive (secondary) on the IBM. Sometimes, when you do this, the computer will attempt to start since incorrect disk.  If when you start your IBM machine, you must press the key at the beginning that sends you in the settings of the BIOS on the computer.  Somewhere in the BIOS settings, you must specify that you want the IBM to boot from the original disk which has been in the IBM instead of the disk from Compaq.  Once you do this, IBM should start from its own drive without licensing issues.  You should then see the Compaq drive mounted as a secondary drive under "My Computer".  You will then be able to copy or back up files, you need to save this record.

  HTH,
  JW

• Ink system failure code... 0xc19a003... Photosmart Plus B210a... Help

  I have a HP Photosmart Plus B210a printer code

  My problem is the following: -.

  The printer screen is display the following information:-the 0xc19a003 ink system failure code. Please turn printer and then turn it on again.

  I tried several times with HP solutions. Nothing worked and I just keep getting the same results. Ink system failure... 0xc19a0003... Please turn printer and then turn it on again.

  Can anyone help me please with a solution.

  HI VTHapa,

  I appreciate your help. After trying to solve my problem with your suggestions and the HP suggestion, nothing worked. So I abandoned my printer and bought a new one.

  Now I don't know how to remove my ad?

  Scooter