Help to the failure of disc-Etrecheck

Similar Questions

• El Capitan will not install. Error message "file system check or repair a failure." Had to reboot with the snow leopard disc.  Any suggestion what happens?

  Trying to upgrade Snow Leopard to El Capitan.  El Capitan will not install.  Get the error message "failed to file system verify or repair.  Quit the installer to restart your computer and try again. "After Setup could not restart without using the Snow Leopard disc (then to download all updates for Snow Leopard).  I tried reinstall and same results.  (in fact made three times)  I'm back to Snow Leopard 10.6.8... Any ideas what is happening.

  Dealing with the corrupt downloaded in OS X

  Dealing with the corrupt downloaded on OS X (2)

  Download Mavericks cannot be verified also applies to Yosemite.

• Engraving and the failure of the copy DVD on Windows 7

  Just upgraded to a new computer at work. Dell Precision T3500 with Windows 7 Professional. I can not for the life of me burn or copy a disc. My old computer never gave me any problems. I record meetings for my work and I have copies on my computer via CDBurner program. I tried to use the Roxio program that came with the new computer, but it won't work, he continues to show the "Failure" and then the drive is bad and I can't reuse it... so now I have a trash can full of blank DVD + R Verbatim discs, bad. It's the only brand I use. I tried to copy the file to the good drive directly to the computer, but it comes out as an ISO file and I have nothing that will burn this type of file. As Jerrydvp said in a previous post... I googled until I can google more that can not find an answer that helps. Was told to check to see if your settings are RAID or something else... then it change IDE... several other unnecessary responses simply refer to the third burners... which none have worked. (IMGBUrn, CDBurner and another) the problem seems to me that this is a Windows 7, a setting on my computer or something. I JUST want to be able to get a DVD I recorded it (it is not copyright protected), stick it in my computer and copy. Nothing illegal or difficult.

  Here are the specs of the computer: Windows 7 Professional with Service Pack 1
  Processor: Intel (R) Xeon (R) W3550 to 3.07 GHz 3.0 GHz CPU
  Installed memory (RAM): 24.0 B
  System type: 64-bit operating system
  I have two hard disks, the original of course and a unit of 2 TB for all of my video.
  Any help is appreciated.

  Hello

  1. what error code or error message do you receive when you try to burn the disc?

  Try the methods mentioned below and check if that helps:
  Method 1:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060
  Please follow these steps and let us know if it helps.
  Please visit this link for more information:
  http://Windows.Microsoft.com/en-SG/Windows-Vista/troubleshoot-problems-with-CDs-or-DVDs

  Method 2. Uninstall and reinstall the cd - dvd drive:
  If the drive is not listed, remove and reinstall the existing drivers.
  To do this, follow these steps:
  1. click on start and then click Control Panel.
  2. click on system and Maintenance, click System, and then click Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  4. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  5. When you are prompted to confirm that you want to remove the device, click OK and restart the computer.

  Let us know the status.

• Portege M700 - DVD drive fails during the recording of discs

  Hello

  I tried the Disc Creator that came pre-installed and also Nero 9.2.6.0. All this on Vista 32 bit.

  The latter seems to have no idea about the problem, as it says smething like unknown failure.

  The creator of disc mentions error code 380381-26-BF040304.

  The problem occurs only at the beginning, I tried with three discs, so I don't think that the disks are the problem. In any case, they are DVD + R DL Verbatim and support up to 8 x, while the recorder goes only up to 4 x for the double layer, so I think I'm ok.

  My suspicion is that maybe the firmware in the DVD version needs update... He mentions Hw 1.00, 1.10 Fw. Other manufacturers of laptop as offer updated firmware DVD for her, but I couldn't find one of TOSHIBA.

  Any ideas?

  See you soon

  Hello

  There are several disks for Portege M700, they are compatible. Usually in the user manual, you can find a list of supported CD/DVD players they are pre-tested by Toshiba and work correctly.

  If you have any other questions about a new drive, ask the service provider authorized in your country. They can offer you a compatible player.

• How to replace "apply downloaded update now" with "Check for Updates" in the menu help when the update fails because the downloaded update files are missing but the "Ready to install update" window keeps appearing?

  Question

  I have another type of problem with Firefox

  Description

  Window "Ready to Install" Firefox "Software Update" appeared. The folder "C:\Program Files\Mozilla Firefox\updates\0" contained the files update.mar, update.status and update.version. Each of the 3 files have been deleted. The next time that Firefox has been started, no update occurred because update files were missing. In the Menu bar, clicking Help showed in the menu drop-down that "apply downloaded update now" was always on the list. By clicking on "Apply downloaded update now" open "Software Update" window "Ready to install update", so that Firefox still considers that the update files exist, but they do not. In the window "Software Update", by clicking on "Restart Firefox" restart of Firefox, but once again it there's no update, and remains "apply downloaded update now" on the Help menu. How can "Apply downloaded update now" be replaced by "Check for Updates" so the update files can be downloaded?

  Version of Firefox

  3.6.3

  Operating system

  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3

  Plugins installed

  • npmnqmp - 989898989877
  • NP-mswmp
  • Adobe PDF plugin for Firefox and Netscape "9.3.2.
  • Default plugin
  • Foxit Reader plugin for Firefox and Netscape
  • Shockwave Flash 10.0 r45
  • Version 1.0.3 copyright 1996-2009 The VideoLAN Teamhttp: / /www.videolan.org/

  You can manually reset the software update feature by closing Firefox and remove the file "updates" (which seems you have done) and the two files "active - update.xml" and "updates.xml" - these are in the installation (C:\Program Files\Mozilla Firefox) directory or in the profile folder (C:\Documents and Settings\nom_utilisateur\Application Data\Mozilla\Firefox\Profiles\something.default).

  If it does not, see our KB article How to resolve the failure of the update of Firefox update error message - the section of 'last resort' can be useful, or or read this article from MozillaZine KB, software update.

  Please let us know how the above work, and if we can be of further assistance.

• Could not load the product recovery disc

  Desperately need to use the product recovery disc but the disc will not load. My computer recognizes the drive but says "this disk or device contained more than one type of content, want you want windows to do" and then gives me the option to open with real player, Media Player, print, slide show or nothing. Why usually just charge it?

  I need the product to work recovery disk I my laptop turns itself of every minute or so. I get a blue screen that is visible for a split second, and then it restarts.

  I restored the system to a previous point, but nothing helped. My only option is to use the system restore.

  Can anyone help?

  Hello

  I'm not sure if I understand you doubt correct but must boot from the Toshiba recovery disc. I put t know what laptop you have exactly, but go to the start menu and select the CD/DVD drive to start. After that, follow the instructions on the screen.
  Check this box!

  If it doesn't work you should try to clean the lens of the drive. Therefore, you can use a microfibre cloth.

• Satellite A210 - 4 1: Winload.exe problem after having used the product recovery disc

  Hello

  I could really do with some help here. I have a PC laptop Toshiba Satellite A210 - 1 4. Disk partitioned with Vista home premium service pack 4.0.

  Last night, I used the product recovery disc supllied with the laptop in an attempt to restore its initial configuration.

  and the end of the procedure, I find myself with a prompt cmd with X:\windows\system32\cmd.exe in the high bit blue box indicating:

  Error: imageX could not apply vista F:\05993xsp.swm Index 2 of ODD to C:\!

  Press a key to continue. Box disappears then an administrator: X:\windows\system32\cmd.exe in the top blue bit indicating:

  waiting for ODD vacancies...
  STRANGE drive f: loan.
  Look for support in the F: drive...
  Failed to initialize the raid class.
  No RAID - continue normally...

  X:\Windows\System32 >

  Now every time the laptop trying to restart it just comes up with the error message:

  CANNOT START WINDOWS. A RECENT HARDWARE CHANGE OR SOFTWARE MAY BE THE
  CAUSE
  FILE: \WINDOWS\SYSTEM32\WINLOAD. EXE
  STATUS: 0XC000000E
  INFO: THE SELECTED ENTRY COULD NOT BE LOADED BECAUSE THE APPLICATION
  IS MISSING OR DAMAGED

  Below I have then have the possibility of esc or continue with the same result of the system attempts to restart.

  The recovery disc has no option of repair on this subject.

  need help please, I have no idea.

  Thank you

  Hello

  Looks like something was wrong during the recovery procedure.
  Have you tried to recover the laptop once more?
  If this isn't the case, you should definitely try this!

  You are right; hasn t drive recovery option for the repair because the recovery disk is not the same as a MS Vista drive. The recovery disk contains image files (it s a package) and the files contains Vista, Toshiba drivers, tools and additional software.

  So if something was happening well wrung out during the recovery procedure, you will not be able to repair the installation of the OS, but you need to run it again.

• Satellite L40 crashes when you use the product recovery disc

  When you use the product recovery disc to repair my laptop it hang after language page display.

  Select meaning when it displays the language, I select language and press next, no action more far there... I can move one pointer.

  Some may help how to solve the problem.
  Thank you

  > Select sense when it displays the language, I select language and press next, no action more far there

  Perhaps, your recovery disk is corrupt. What happens if you try with Windows disk copy?

• T430s will not restart, can someone please explain how to use the 4 recovery discs?

  So I bought a Lenovo T430s, with Windows 8.1 almost 2 years (off warranty now). It comes frozen, has started to beep, then turns off, and now it won't restart. When I turn it on, it always goes to the black and blue screen that offers a Boot Menu and a Menu of Application. The Start Menu has 2 options: ATAPI CDO: MAST * beep * ADVD - RAM UJ8C2 and PCI LAN: IBA GE Slot 00C v1536 8.

  When I bought the laptop, it came with 4 disks. Two of them say "Windows 8 Recovery for Windows 8 Media products", and the other two say "operating system recovery disc, Windows 8 Pro (OEM Activation required 3.0)". "

  I don't know what that most of this way. Can someone explain how I can fix or restart my laptop? I wonder if I am supposed to use a bootdisk of some, although it is at a certain menu option... I really appreciate any help

  The first item in the Startup tab is 'Boot', Yes?

  Press enter and start > splash screen should display with something like a list of the Boot priority order .

  What do you see that listed there?

  Kind regards.

• TestStand 2014 cleaning after the failure of a step

  Hi all

  I am new to TestStand, so I have a simple question that could boring you but I cannt find the solution.

  In my main sequence, I say 50 steps. If a step has not the next step to executete (by deafult).

  What can I do to stop the execution of the following steps if a step fails. I wish that the sequencer will cleanup directly then call the next step in the main sequence.

  All mere suspicion is appreciated.

  Axel

  Hello

  You can define the sequence of cleaning goto on the failure of the setting sequence:

  Configure > Station Options > immediately Goto cleanup sequence if an error occurs

  

  Also, make sure that the steps fail sequence on a step failed, by setting up:

  Parameters of the step > step sequence of Causes of failure

  

  I hope this helps.

• HP TouchSmart 420 - 1000 t CTO: need help with the installation of windows on a new hard drive for HP TouchSmart 420-1000 t CTO (bought in 2012)

  My hard drive is failng in my computer I get the message that "the failure of hard drive" is imminent for several months now.  I did just recovery disks after I bought my computer and that you have ordered a new hard drive.

  I thought that the part of the setup of windows on a portion of the current hard disk that I need to replace.

  I want to just make sure that if I can restore the windows completely and that all programmes provided with the computer are on the recovery discs I want to do it myself - so I need to know I'm doing it correctly!

  Thank you very much.

  Kimberly

  PS I found this web page below and I want to just make sure that it applies to me:

  http://support.HP.com/us-en/product/HP-TouchSmart-420-1000-desktop-PC-series/5146292/model/5155758/d...

  This link in the post seems to apply to the situation.  If you have already completed the defined recovery disc then it should just be a matter of running the recovery disc after the new hard drive is installed.  The recovery disk set will be "restoring windows completely and all programs included with the computer".  Be aware that all other items that were installed or personal data will not be restored.  When replacing the hard drive, do not buy a disc exceeds the limit of 2 TB, such as published in the SPECS for TouchSmart 420-1000 t CTO.

• Pavilion 20-b313w: HP Pavilion 20-b313w reset and reinstall with the full recovery disc

  I tried to remove malware from my system so long, so I decided to do a complete reset. Before I have it I order the recovery for my computer disk to reinstall but unfortunately reinstall option disc never came. The recovery partition has been used to reinstall so my computer. I think my computer is still infected because it is in the partition. And because after the reset there are 3 programs in the control panel to uninstall the list of programs that have been updated without an internet connection because I unplugged my computer to the modem during the reset process everything and I am 100% sure that I have not reconnect before seeing these programs. Also, list of updates installed on the Control Panel showed that the 3 programs had updates installed. As these data are still on my system please tell me it is possible for me to do a true thorough reset that removes hard disk and recovery partition then and I can reinstall everything with the HP recovery discs. And please also give advice on the update after. Should I do Windows updates first or updates of HP first. And when it comes to updating the BIOS there are 3 available updates. Can I download and install all 3 starting from the oldest to newest or just the new version? Then when my Windows 8 is fully updated with the HP and Windows tips on how to reinstall Windows 8.1 (free update of Windows Store, no disc) and update? I know I'm asking a lot, but I want to just make sure I do this right so I can enjoy my computer again and if there is a problem, I'll have some kind of reference to look to see where I was wrong. Thanks to all who read this and I am particularly grateful to those who take the time to share their knowledge with me in response.

  Thank you for the additional information.

  Your best option is to use the recovery media that you should have made when you purchased the computer.  If you do not do this, the only other option you have is to buy the media at HP.  The recovery media will restore your computer to its original configuration and reinstall the recovery partition.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• W510: How do I access my data from a failed hard drive after the failure of the motherboard

  I made a mistake and has paid for major .

  This error pouring a drink sweet on my laptop. I know, I know, my keyboard can and protect against damage caused by the spill, but it was a drink together. In any case, I panicked and shut down the system and it has upset and removed the keyboard. And be the impatient person that I am, I made what was probably the ultimate error. I do not give everything save a sufficient amount of time to dry and I tried to boot the system. There is my computer. Or at least I think.

  Symptoms: It began at the start, kept a beep, sometime just close and will start.

  In any case, I guess that my laptop went kaput. Now to the point of this thread. I had not been a recent backup and can't remember when the last backup was actually made. Assuming that my hard drive is ok, I want to get all my data, so I saw several options:

  -Send the system to a data recovery service where I will not pay less than $300, but probably 2 to 3 times what

  -buy an equivalent model laptop and put the HARD drive in there

  -by an external SATA hard drive enclosure and mount it via USB on another computer

  I bought a box external and assembled this evening. I had read about the data access of difficulty with a system non-Lenovo because of encryption of the data. I proved that by linking it to my work (a Dell) laptop and I couldn't access my data directories. If I have access to an another Lenovo Thinkpad, I'll be able to access the data if connected via USB? I had read that I can access the contents of disc hard if it is connected to an another Thinkpad, but I knew not that if it means that I have it connected via SATA connection or if there is work through the USB port.

  I'll appreciate any suggestions for accessing my data.

  Best regards!

  All,

  Thanks for the suggestions.

  I was able to recover my computer and all data on it.

  Just to describe what I have done, here are the details.

  Because of my concern about a failure of the motherboard, I bought a used/given new keyboard and an external SATA drive enclosure. I was not able to properly take possession of the car from my other laptop, but I was able to access the data in Mode without failure. With my data, I plugged the hard drive and the new keyboard in and started without problem.

  Thanks again,

  brent86

• Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

  OP: Action Center... PC problem: 1 important message

  After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

  Hello Irfan,

  Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate.  Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me.  On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers.  Not the only one, I have is the product key which is one 25-alpha-numeric.  I tried to enter only and does not pass.  This is why I say that I can pay for help since I did not ' have the product ID.  Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think?  If you can get back on track, I would be very grateful and thank you once again to be a big help!

  wandrinstar

  Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

  Keep up the good work,

  wandrinstar

• HP Photosmart5520: The failure of the 0xc19a0042 printer message

  Hello

  I tried all the help on http://support.hp.com/us-en/document/c01458034 without success. I reset my printer several times but still I have the same error message. Is there anything else I can try or is it time to get a new printer?

  Thanks in advance

  Chris

  Hi Chris_P7,

  You read the appropriate document to resolve the failures of ink for your printer system.

  If the questions is still not resolved, you can buy a replacement printhead which is step 10 of the document you attached.

  However, there is a cost associated with this part.  It may not be worth it for you to invest in an older printer that may or may not continue working after replacement of this part.

  Maybe it's time to buy a new printer that will come at least with a guarantee.

  I wish you the best in making this decision.

  Jean