HELP format specifier

Similar Questions

• Too little of the format specifiers.

  Hello someone can help me format this correctly? It keeps giving me the error too little the format specifiers.

  At some point, you mixed up of your string format and you put the string name. Wire directly your group name in the name of Group on the TDMS VI entry. And then thread the pipe name format string in the format string driveway. See here:

  

  You must do this to 3 loops.

• format specifier syntax - several commands syntax

  Hey guys,.

  I know there must have been a post to it, but I can't seem to find it. I have several slna (11) that need to be formatted differently (some are dates MMDDYY, some of the values 0,5555) and then written to a file. I'm using and that's why I need to format it. Here's the format specifier syntax that I use:

  %8.0f %4.0f %5.0f %3.1f %5.2f %4.2f %3.1f %3.1f %3.1f %4.4f %3.2f

  When I open the file, this syntax follows all values (and they are not formatted). I hope that there is a glaring error that can be easily resolved.

  (PS I tried every different delimiter without result)

  See you soon,.

  Tyler

  Hold on to your current code until this idea is implemented (if any):

  http://forums.NI.com/T5/LabVIEW-idea-exchange/separate-format-string-for-each-index-of-array-to-SPRE...

  In the meantime, you'll have to individually format the columns to have different formats.

• Why can't I get help from this program? ___The help for this program was created in Windows Help format, which depends on a feature that is not included in this version of Windows.

  Cannot run files .hlp in Windows 7

  No, it is not included. Click Start, then type Winhlp32.exe, and then press ENTER. You will get a help dialog box that says:

  Why can't I get help from this program?

  The help for this program was created in Windows Help format, which depends on a feature that is not included in this version of Windows. However, you can download a program that will allow you to view help created in the Windows Help format.

  For more information, go to the Microsoft Help and Support site.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Download the program "help format.

  I'm trying to download the program "help format", but I need to validate my version of windows 7 before it will allow the download. When I download the validation tool, it says "this version of WGA validation tool is no longer supported. Please download the latest version and make sure that your system clock is correct "."  Where can I find the latest version?

  You must use 32 b internet explore for validation.

• The search for solution to the old ms help format lead to obsolete genuinecheck.exe

  I use a software which is absolutely essential for my work.  I'm in a situation where I need to read the help files for the old software.  This software uses an old help format that causes windows 7 to give an error "the help for this program was created in windows help format, which depends on a feature that is not included in this version of windows..." »

  I went to download the version of windows 7 to the help format that I need, but I need to validate my copy of windows 7.  I tried to download the genuinecheck.exe that I was directed by the microsoft site, but then I was informed that the copy of genuinecheck.exe that Microsoft gave me was outdated.

  The site I went to that was:
  http://www.Microsoft.com/en-us/download/exe-validation.aspx?ID=91

  It is a microsoft site, spewing a useless file right when someone like me is in terrible rights to our work.

  I literally hours complete my task of work and I know I won't get help I need in time to hit my date limits.  So I post this question with the hope that I can solve the problem after the fact.

  Thanks to anyone who can help me.

  And thank you MS for F * ing me.  I can very well lose my job because of you.

  OK, I found a solution that works for me.  I'll go through the steps because it is a bit complicated.

  First of all, I would like to thank Komeil Bahmanpour, who has a blog entry which gave the greater part of the solution that I needed to solve this problem.  You can find the entrance to the criticism according to:

  http://blog.komeil.com/2009/06/Windows-Help-program-winhlp32exe-for.html

  For many of you who may have this problem, you'll probably be just able to decompress the .cab file, it has linked to his site and then run the .cmd file to work things out.  However, who has not worked for me.

  * What I did *.

  In General, I had to download the help files for work and then replace the non-functional regions.  To do this I had to change ownership and permissions of the existing files.

  I downloaded the .cab files that contains the file winhlp32.exe and winhlp32.exe.mui for 64-bit windows machines 7.

  I opened windows Explorer and place it in the main c: directory

  I typed "winhlp32" in the search box.  It gave me all the files and folders that started with this name.

  Note: I tried to rename the existing winhlp32.exe and win32.exe.mui files, but it did not work because permission to files did not belong to the administrators.  Rather it is strangely belonged to the so-called "Trusted install."  So I had to change the owner to administrators (and give administrators the appropriate authority) to rename these files.  Here's how I did this:

  I right click on the files which permissions I wanted to change in all existing places that they were currently on my computer.  Clicked on properties.  Clicked the safety.  Click Advanced.  Click owner.  Clicked on edit and change the owner of the files to administrators. Here, I went back to the 'security' tab and clicked on "Edit" after the words "to change permissions, click Edit.  I checked the box full control for administrators.

  I also had to go through the process described above for folders files have been confined in. (help files do not work correctly without also changing the ownership and permissions of the folders as well)

  I renamed the original files (so I could change them back if something bad happens).  I wrote that the files downloaded in the same directories renamed files were in.

  I ran my program using old file system and everything worked!

  ***

  OK thanks to those who have already given this answer and thank you again once to angeline for this blog entry that gave me most of what I needed to fix this.  My work assignment go expiry date and you deserve the honours.

• FM and the FX format specifier.

  How can I disable FM or FX format specifier in the oracle form builder? I mean, where I could find these format specifiers, so that I couldn't turn off em and don't get error ORA 01850?

  Hello!!!

  Try this:

  If: block4.ten_rec_dt is of type Char and: block4.ten_rec_tim is of type char and then

  use:
  TO_DATE (: block4.ten_rec_dt |) » '|| (: ' block4.ten_rec_tim,'DD/MM/YYYY HH24:MI:SS)

  If: block4.ten_rec_dt is DATE and: block4.ten_rec_tim is the DATE then

  use:
  TO_DATE(TO_CHAR(:Block4.ten_rec_dt,'DD/mm/yyyy'). » '|| TO_CHAR (: block4.ten_rec_tim, 'HH24:MI:SS'), "DD/MM/YYYY HH24:MI:SS")

  Kind regards.

• Help formatting a WebHelp Pro project related to FrameMaker

  I am new to FrameMaker and RoboHelp, two software have been used by my company before I came, but unfortunately the people who knew the software left before I was hired.

  I imported our FrameMaker 7 documents in FrameMaker 10 and recreated the WebHelp Pro projects.

  I have some simple formatting problems which can probably be attributed to my lack of knowledge or training.

  I install a skin, the master page and style that matches the old help we need to reproduce as much as possible.

  My problem is that I am a FrameMaker to RoboHelp project link so I changes specifically in the RoboHelp project (we have personalized by customer help and I am hoping to keep only the FrameMaker document).  I'm not able to get the paragraph formatting (specifically indented) to work right.  The information seems well before the master page is applied, but once the master page applies (during the generation of aid) everything is pushed to the left column and there is very little withdrawal and this isn't the way specified in the style sheet.

  Any help would be great.  I was getting used to packages and really love, but now I'm pulling my hair out about little things (such as Visual form).

  Thank you!

  I have found the problem.  I decided to change my stylesheet from RoboHelp outside and found a lot of "null entries.  He works in the way I asked now.

• DV7-7333 CL. : need help formatting has replaced hard drive in my laptop

  Greetings,

  I received instructions from HP another volunteer on a bad hard drive replacement. I replaced the hard drive with a new and need someoe to please guide me how to format my new drive hard back to the WIN 10 I had installed on the former. I also buy a 22 pin adapter usb to SATA.

  Another agent said that Windows 10 can be reinstalled on a new drive hard if your installation has been activated before. The activation servers Microsoft just know your computer and will be reactive. You must Access the media creation tool and have it make a bootable DVD player or you need a usb thumb drive at least 4 GB.

  I am in Germany but still do not know the language well enough and could not find a tool for creating Windows Media version in English free repacement.

  I don't know what to do to format my new hard drive... Please help!

  Thank you.

  Wes

  PROBLEM SOLVED (FINALLY)! I just wanted you to know that we have finally understood why the data on the computer with the media to WIN creation tool not was not download on thumb drive = Firewall! Not sure if everyone will have this problem but in collaboration with Windows agent, I happened to see a pop-up window saying something on the analysis of data not allowing not to download. It is therefore sometimes necessary to temporarily disable all firewalls and Web titles before starting the download.

  Follow the instructions of man Las Vegas thread above to create a bootable USB Thumb Drive to replace newly hard drive with OS Windows 10. HOWEVER, the following was not mentioned in his instructions, and not all computers can do this extra step so keep the following in mind if your USB key does not complete the upload.

  Again, to download data, I downloaded on the work computer, a USB key, I had to we need to temporarily disable all the security features on the work computer until you have completed the download of the WIN Media Creation Tool on the thumb drive process (this includes your private web anti-virus, we can use AND/OR the WIN Firewall and other security features available on the led computer. )

  I hope this helps those who have similar problems.

  Thanks again for all your help man Las Vegas thread!

  Kind regards

  Wes

• Question about syntax of Format specifier

  Dear community,

  I try to write data in an Excel file, it does not work properly. My problem is that I'm not able to get the correct number of decimal points in my data. I would have three decimals after the comma (and not a period) and am currently using "% 3d" as a specifier to format syntax but it seems to round the data to numbers with no decimal point. I enclose below two screenshots, one of VI and the output of said file.

  Any suggestion would be great!

  Thanks in advance,

  

  Use .3f. Le.3 is for the number of digits after the decimal point and the f for a floating point number.

• RUNTIME ERROR NOT FATAL: unknown source Position, the 0x000027D0 thread id: type of inconsistent parameter with the format specifier.

  I'm under CVI 2013 SP1 with debug level set on scope.

  I changed a parameter in a FmtFile formatting function call and now receive this error. I wonder why the CVI can not handle this error, that is, find out about the number line... You can have more than one function of Fmt...

  Hello Wolfgang,.

  I have reproduced the error as you described in Debug64 configuration only. In the Debug configuration, the source location is specified, so I opened the bug 472987 follow. The problem seems to be in 2013 LabWindows/CVI.

  You also experience this problem in the Debug configuration? If so, could you please give a sample?

  Thank you for your input,

  Nelu F. | National Instruments.

• need help to specify the destination when the release of webhelp

  Hi, I'm under RH8 on Windows XP.  I've always published my project (Webhelp Pro) to a web server in the network, but somehow my destination server settings got wiped out.  However, when I tried to configure them again, the only option that is imparted to me under connection protocols is now Robohelp Server.  I used FTP the files on the network server.  Where is this option?  I don't have a Robohelp Server.  I have attached a screenshot.  I would be very happy to help with this problem.

  Thank you very much

  Emily

  Hi Emily.

  The dialog box you have provided part of the presentation of unique source of WebHelp Pro where you specify where you want your output published in the RoboHelp Server application. If you do not have this application installed, you can not use this provision of single source. I think that what you need, is the unique source of WebHelp schema that indeed offers you the ability to FTP the output to the desired location.

• Need help formatting pages

  I do a monthly newsletter for the Church. There are a dozen sections. 'Finance', 'K', 'music' etc. I have the section headings in the text boxes.  They are placed in a certain order in the newsletter. As I work at the entrance of content, section titles stay put so I'll never have to move the section headings where there is content is passed to. (Articles are of different lengths each month: (tray of food for example) can only use 1/2 column a month but then the entire page to another). It's a document pages usually 10 2 column or more. Guess the bottom line is, is I there a way to have a stay content sections specific with the title of the section, while I continue to work on the document?

  Maybe a clearer example: if I have the finished newsletter and then need to add more content to the first page, of course everything moves but aren't section titles. Any ideas? Thanks in advance... Karen

  In brand to rearrange the text boxes :

  Object Placement: Move with text

  Skin: In line with the text

  and make fun of the text with the text in the usual, saved as styles and formatting converted text to space reserved:

  Menu > Format > advanced > define as placeholder text

  

  You can format the paragraph text boxes are sitting in a standard before and after spacing and save as a Style too.

  Peter

• Scan of the file: path/data not in the format specified in double

  Can you get it someone please let me know why it does not work?

  It's just a piece of sample code, to write data in a txt file and then read it.

  First, if a file already exists when I want to write in it and I chose 'Replace the file', he says stop and double track.

  Second, if I write a new file, it says: error 85: Scan failed. The input string does not contain data in the expected format.

  Attachment VI.

  EDIT: see post.

  Just for reference, I solved it by using the match VI pattern in a loop and then using the table of indexes for individual values.

• I need help formatting my computer.

  Ive never formatted my laptop before so I don't know how, the reason is according to me, some of my Web sites are blocked on this laptop computer special reason is for the safety of the brothers and sisters and stuff like that, and I need to delete all my programs for my lil brother also.

  C900 E-system with windows 7 Enterprise

  Hello

  If you want to format the laptop, there are different types of formatting - http://windows.microsoft.com/en-us/windows7/installing-and-reinstalling-windows-7

  If you are looking to CLEAN install Windows (nothing recorded, new installation):

  To install Windows 7 using the custom option and formatting the hard drive:

  To format your hard disk during Windows 7 installation, you'll need to start, or boot, your computer using the Windows 7 installation disc or a USB flash drive.

  1. Turn on your computer so that Windows starts normally, insert the Windows 7 installation disc or a USB flash drive, and then turn off your computer.

  2. Restart your computer.

  3. Press a key when prompted and then follow the instructions that appear.

  4. In the page install Windows, enter your language and other preferences, and then click Next.

     If the page install Windows does not appear and you are not prompted to press a key, you may need to change some settings of the system. To learn how, see start your computer from a disk to install Windows 7 or USB flash drive.

  5. On the Please read the license terms page, if you agree to the terms of the license, click on I accept the terms of the license and then click Next.

  6. On the type of installation do you want? page, click Custom.

  7. On the place where you want to install Windows? page, click drive options (Advanced).

  8. Click the partition you want to change, click the formatting option you want to run and follow the instructions.

  9. When you are finished formatting, click Next.

  10. Follow the instructions to complete the installation of Windows 7, include the name of your computer and setting up an initial user account.

  And if you want a more in-depth guide can be found here - http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html

  Kind regards

  Patrick