help function on dv6 envy

Similar Questions

• Help! HP Dv6 Envy - I visited Hp Web site for drivers and I found many, if you please I will...

  Good day Forum of Support Hp
  I need your help...
  I visited Hp Web site for drivers and I found many, if you please I will install all the drivers that I've seen out there?
  Thanks to you all.

  You should check whether the installation file downloaded is for the device you have - of Device Manager.

  Chipset depends on what processor you have.
  Utility Intel chipset needs, etc. management interface.
  AMD needs AMD graphics driver

  If yours is a switchable graphics system (you will be able to note the two devices in the section display adapter in Device Manager), you must install the discreet dedicated graphics driver & it integrated one (in the case of Intel being integrated) - from the download page.

  Rest you can download and try.

• APPLICATION SOFTWARE PROBLEM - HP DV6 ENVY

  Help me please
  My Hp Dv6 envy, after downgrade to windows 7, whenever I have install most software, they later stop aperture, reducing the complete function or just stop working. I want you to help me please am a student. I thank very you much.

  Hello @mubros ,

  Welcome to the HP Forums!

  I understand after decommissioning of your laptop to Windows 7, your applications will not work correctly.

  Can you please tell me what phone you use? For more information on the search for your model and product numbers, click here: How can I find my model number or product number?

  If you have reinstalled all the correct drivers? (Chipset, GPU, etc...)

  Can you give me some examples of programs that have problems please?

  I look forward to your reply.

• Fan of 7214nr HP DV6 Envy stop working!

  Hello

  I have a HP DV6 Envy 7214-nr. It is a nice laptop. recently the fan stop working. I mean his work at first boot and then its only funtion to speed very very slow and barly... .barly you can hear it working. not like some months ago.

  usually, I heard the noise of the fan when I play games and generally it works charger if I turn on HP CoolSense. Games become very slow after the first 4 minutes and I can't hear the fan working not at all, and I can't smell even fan works when put my hand near the vents. When I restart my laptop I got this error:

  Hi there @shadad,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I looked into the issue that you mentioned in your post on the Forums of HP Support. I understand that your fan does not work on your HP dv6-7214nr Notebook PC ENVY , and you receive an error message at startup upward.

  Please take a look at this document, called System fan (90 b) error message at startup. You will find that the document said to try the following steps when you receive an error stating that "the system has detected that a cooling fan does not work correctly.

  To resolve this error, follow these steps:

• Adobe Photoshop CS5.1 reinstalled because the help functions gives an error message (7).

  Hello

  When I tried to use the help function Adobe Prhotoshop CS5.1 a pop-up message shows errorcode (7) advise to reinstall the product. So I did, but it did not work. What can I do more? Mind you, the help in bridge function works as it should and the two products are installed at the same time.

  Kind regards

  AAD

  Thanks, I found a few topics on the error. I reinstalled and now it works.

  AAD

• HP dv6 ENVY is very slow processing

  Hello. I bought a new laptop dv6 HP ENVY a few months back and it is slowing down to make my life miserable. I don't know what's the problem with him.  It's a bit close empty and he is still suspended many. Can someone help me fix it?

  hhHmm, ok... After that you said, I did a little Google search and found other people talking about similar issues after their Service Pack 1 updates.  Unfortunately, there is no quick fix to their computers get slower.

  So here are a few more things to try based on what is searchable via Google, I hope it helps speed up your computer.

  (a) install HP Support assistant, and run Tune UP , as shown in step 5. (Restart your PC if necessary.)
  (b) run the Tool from Microsoft Fixit to performance problems.

  (c) if these two steps do not help, check your system for corrupted files: file system (CFS) auditor

  (d) Finally, check if your Direct X is functional and up to date: http://support.microsoft.com/kb/179113

  That's all I have for you, hope, he's fine

• HP dv6 envy: want to know on the best internal hard drive to replace it with

  Hi friends... I return my hp dv6 want 3 years and it has worked well for me so far, but since last month, everytime I turn on my laptop, a message is popping indicating that YOUR HARD DISK has FOUND YEAR IMMINENT FAILURE AND there NEED TO BE REPLACED and I studied a lot of posts here regarding this problem and everyone was asked to replace it with a new one. I don't know what drive should I replace it with. Could someone please help me in this regard. I need the following details:

  1. where can I find new internal hard drive HP ENVY DV6 1 to buy?

  2. can we replace this hard drive with the hard drive to other companies? (such as seaggate)... If so, so, please let me know

  3. can I replace the hard drive with a hard drive of 1 to solid state?

  4. links to vendors who sell internal hard drive?

  Please help me friends...

  The answer is Yes in all areas. The laptop will accept any 2.5 inch wide disk SATA 9.5 or 7 mm thick and which includes mechanical hard drives and Solid State drives. Where are you located (one country)? Hard drives and SSDS for laptops are a part of the goods. You can pick them up at a Best Buy or Frys if you live where there are no Frys or you can use amazon.com or newegg.com or similar online service. The prices vary a lot, so it is useful to get a good deal. A 1 to SSD can run more than $300, you know. Need instructions for installing and/or migrating software? We are a bit like McDonalds here in the Forum... served billion regarding replace drive hard/updates to level. One of the specialties of the House, so to speak.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP dv6 envy: wipe HARD drive

  My laptop could not start. He kept saying 'Please Wait'. I took the HARD drive and made a slave on another computer; took all the user files and then formatted the HARD drive. When I reconnected the HARD drive in its own machine, the computer says that he tries a recovery.

  What are my options? Please help.

  Hi there @Munthu,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to reach out and help! I understand that wipe you the hard drive and now you receive an error message indicating "Seeks a Recovery" on your HP ENVY dv6 Notebook PC.

  Have you tried to insert recovery discs?

  Did you create recovery discs before reformat you the hard drive?

  When reformatting a hard drive, it takes the operating system and everything related to it off the hard drive. That being said, in order to re - install the operating system and all of its essential drivers, you need Recovery CD or a USB stick recovery. If you have not done one for the laptop, you can follow the document 'getting HP Recovery disks or year HP USB Recovery Drive' .

  Here are a few other documents for you who understand the steps and troubleshooting information on the recovery of the system:

  • Performing a HP system recovery
  • Troubleshooting the HP system recovery problems

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of troubleshooting as well as your model number (How can I find my model number or product number?).

  Have a great day!

• HP dv6 ENVY: appearing in Windows 10 constantly up-to-date printer does not install

  MY laptop is a HP ENVY dv6 and I also have a HP Deskjet Ink Advantage 5525.

  Yesterday I updated my laptop to Windows 10, and then suddenly an update appears in Windows Update for the printer.

  It's the update: "Hewlett-Packard - imagery - Null Print - HP Deskjet 5520 series.

  But the update maintains do not install and giving this error "Error 08024200 b ×", and I do not know how to solve the problem. The update appeared only after the upgrade to Windows 10 and I've updated Windows with 10 being automatic, I can't say my laptop to stop trying to install this update.

  Any help would be really appreciated.

  Hi @bleach-eminem,.

  I'd love to help get rid you of the error you see. I suggest you Open the Device Manager and remove the 'unknown' printer you probably see here.

  1. Click on the right arrow next to the following entries to develop and then search for your printer in each list:

• HP Dv6 envy: Noisy fan

  My fan always turns really hard and the laptop runs really hot. I also bought a key cooling thought that it would be useful, but it stills works really hot, someone at - it solutions?

  Hi @Iman1 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question on your HP ENVY Notebook dv6 and overheating problems and issues of possible fan. Here is a link on which could cause overheating and how to reduce the heat inside the laptop.

  You can Reset the BIOS with this document by selecting the reload the default BIOS settings. Helping others it restores the default settings of fans.

  Please let me know how it goes.

  Thank you.

• HP dv6 ENVY: My Envy of HP dv6 wifi does not work all of a sudden

  Hi, I received my laptop 2 years in 2013. He works very well with the occasional wifi disconnects, but above all, it reconnects immediately after. However, earlier I was Surrfing the net, my wifi suddenly disconnected and now it says it is unavailable and does not at all any network show. The wifi icon now displays an 'x' also. Help, please.

  Product name: HP ENVY dv6 Notebook PC
  Product no.: D4B30PA #AB4
  Series No.: [personal information]
  BIOS (Setup): F.22 - 02/11/2012 (A 088, 120000305910000620100)
  Keyboard Review: 52.24
  Total memory: 8.00 GB
  Processor name: Intel Core i7-3630QM CPU @ 2.40 GHz

  Hi @Alzark,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your wireless network was working but now it says not available and shows not all networks.

  Have you ran the Windows troubleshooting tool?

  If you check device manager is there any errors on the network map?

  HP Notebook PCs - performing a Hard Reset or forced Reset.  Please be sure to disconnect all external devices and remove any disc from the optical drive.

  Here is a link to HP computers - troubleshooting wireless network and Internet (Windows 8)

  HP Notebook PC - hardware failures (Windows 8) screening.  Under components is a network control.

  Good luck!

• HP dv6 envy: my laptop turns on but it does not load windows

  Hi, recently my computer has stopped working. It lights up; However, he will just stay at the startup screen until the screen will Dim. I ran the hard drive DST short test and it comes back as being down. My FAILURE ID is 0LGDAJ-6MP82Q-QFPK1A-60TX03 and my PRODUCT ID is C2M16UA #ABA. Can anyone advise me on what I should do? Also can save my files to that hard drive?

  Thank you!

  Hello
  
  Data sheet: http://support.hp.com/us-en/document/c03497843
  
  Manual: http://h10032.www1.hp.com/ctg/Manual/c03591281
  
  Please replace the HARD drive failed by a new similar form factor.
  
  Order the HP USB recovery, if you have not created a game for yourself after you set up the laptop.
  Or buy it here:
  http://www.computersurgeons.com/p-23043-Windows-8-64-bit-Supp-1-Recovery-Kit-708588-001-for-HP-envy-notebook-PC-model-number-DV6-7245us.aspx
  
  You can remove the HDD, connect to another PC using SATA USB adapter. Use Windows Explorer and copy the files you need to HARD drive failed.
  
  Concerning
  
  Visruth

• How to implement a callback to the help function call library function node in LabView?

  I try to call a fuction from a SDK.dll library by using the node call library feature. The SDK has been provided to

  me and I don't have the source code, just the .dll and .h files.

  The SdkSetPropertyEventHandler function has a function of recall as one of its parameters. How to apply the

  callback using the NSI node? I'm a good programmer LabView but this is my first time using the library to call

  Function node. I read all the info I can find on the web site of NOR and the discussion Forum, but can not understand

  This one out. I'm using LabView 8.6.

  The deacribes SDK.h function as:

  Function: SdkSetPropertyEventHandler

  (SdkSetPropertyEventHandler) SdkError SDKAPI
  SdkCameraRef inCameraRef,
  SdkPropertyEvent inEvnet,
  SdkPropertyEventHandler inPropertyEventHandler,
  SdkVoid * context);

  //
  Description:
  Registers a callback function to receive the status
  change the notification events for the States of property on a camera.
  //
  Parameters:
  In: inCameraRef - designate the object camera.
  inEvent - designated one or all the events will be completed.
  inPropertyEventHandler - designate the pointer to the callback
  function to receive the camera property-related events.
  inContext - designated application information must be passed
  way to the callback function. All the data necessary to
  your application can be passed.
  Output: no
  //
  Returns: A sdk errors.
  -----------------------------------------------------------------------------*/

  A separate header called SDKTypes.h file contains the following data:

  typedef SdkUInt32 SdkPropertyEvent;
  typedef SdkUInt32 SdkPropertyID;
  typedef void SdkVoid;

  typedef struct __SdkObject * SdkBaseRef;
  typedef SdkBaseRef SdkCameraRef;

  /*-----------------------------------------------------------------------------
  SdkPropertyEventHandler
  -----------------------------------------------------------------------------*/
  typedef SdkError (SDKCALLBACK * SdkPropertyEventHandler))
  SdkPropertyEvent inEvent,
  SdkPropertyID inPropertyID,
  SdkUInt32 inParam,
  SdkVoid * context);

  Thanks for your help.
  Alejandro

  Andrew_E wrote:

  Hi Rolfk,

  You are absolutely right. This article describes what you were talking about? I'm just trying to get as much information as possible on this thread if the solution is easier to find for the future. Thank you.

  Yes, but I find the idea of using .net to call a LabVIEW VI as callback function C a bit as using a roll of Steam ironing your pants. Why do it? Well the steamroller has extra security guards that make it less likely that you'll break your pants in the process, but it's not elegant IMHO.

  Write a C DLL that translates between a C callback and a user event LabVIEW using the PostLVUserEvent() of the interface of the kernel to run LabVIEW function seems so eleganter for me. Yes, it's a bit of programming in C, but good!

  Rolf Kalbermatter

• HP dv6 Envy: how to stop the automatic installation of 8.1 to win on HP Envy laptop?

  My laptop HP Envy has automatic update downloaded to Win 8.1. He saysit will install on the next reboot. How to stop this instsall?

  PSKROBACK wrote:
  

  I didn't upgrade because I read several reviews that said if you didn't have a touch screen that you would have difficulties to navigation in some applications. What apps not said.

  What you say makes no sense and I question the validity of these comments.  Update to Windows 8.1 will do more good than harm.  Very few people who have updated have experienced problems, so comments to keep your receipt no logic.

  Here's something you can do.  Download Macrium reflect free and create a hard disk image on an external hard drive, don't forget to create the rescue disk.  Once done, update your system to 8.1.  If you have any problems, then you will be OK.  If it doesn't work or you have problems you can restore the backup of the image on your system that will put the computer to Windows 8 with no ill effects.  An image backup of your system from time to time is the best thing you can do.  You will have no problems with the help of recovery disks, reinstalling programs and data.  Many people use this method and have no regrets.

  http://www.Macrium.com/reflectfree.aspx

  Don't be afraid of it, it is a very useful tool.

• Help! -Desktop HP Envy locked computer

  I'm working on the computer of a friend who is a photographer.

  She has a HP Envy.    Recently two problems happened at the same time.

  She did an automatic update that killed somehow out of his internet connection and its msn password got screwed up.

  On the screen, it has a red X through the internet connection icon.   It will say that it is connected but it is not connected.   I tried wireless and ethernet cable.

  Update the password for msn easily.    So now that we know what should be the password, however, because the computer cannot connect to the net, you don't find the changed password.    If we are always locked.

  I talked to the Helpdesk repeatedly.    They recommended that make a good backup, then just restore the computer to factory resets in the hope that it will address the problem of internet connectivity.

  The problem with this, is that it has almost 1000 GB of pictures only.   (not to mention documents, emails, etc.)

  So when I try to save it, I get an overflow error telling me the computer does not have enough space for the same number files.

  When I tried to save only photos, it lasted 5 hours and was still 2% for backup.

  The computer has a Bank of 3 hard disks, total 4 TB.    I also tried to use an adapter to read those directly on another computer via USB but I have yet to find an adapter that will read the readers.

  I'm getting desperate.    Can anyone suggest and adapter that works, or a path in the computer that will bypass the signon msn.      Anyone?

  CD

  Hello @Chrisd1234,

  I understand that your friend's computer has received an automatic update that locked out of his computer and you are looking for assistance. I'd be happy to help you, but first of all, I encourage you to publish your product for your computer number. I'm a link a HP Support document below that will show you how to find the number for your product. So, if you could indicate what operating system you are using. And if your operating system 32-bit or 64-bit like this and the product number I can give you accurate information.

  How can I find my model number or product number?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Will you please re-post with the information requested and I would be happy to provide assistance. Thanks for posting on the HP Forums. Have a great day!