Help! G580 start problem

Similar Questions

• Unregistered start problem - please help.

  Hi, I'm new here and I'm hoping someone can help with a problem I'm having with my HP Pavillion PC Phoenix - I can't find the same problem listed anywhere boot.

  A week or two back, the PC froze online and I could not see any other option but force a stop. But now it won't start - 'Boot' or something else.

  I'm sorry - I'm really not an expert on these things, but as soon as the power supply is turned on, the computer makes basically the 'click' usual, lights, fan and associated noises start, then around 2 or 3 seconds later, it 'clicks' again and close down, after another 2 or 3 seconds , "click" again and the lights, fan etc come back, and then it turns off again as described above.

  The whole cycle just repeats again and again automatically and without modification, for as long as you let. The only way to stop it is to cut off the power supply, or hold the power button down, but the second that you release, it automatically triggers the cycle that I have just described.

  All I can add is that I got a USB in the PC when I forced the closure, but have since removed it. There is no time to try anything as a shortcut key f10, etc.

  Any help would be greatly appreciated. Thank you.

  @Michael73,.

  Looks like the power is your question, do you know if the computer is still under warranty? If you are not sure, insert the information on your computer in this linkand confirm it. If you are in warranty you want to join the support of HP to set up a repair.

  Please answer as soon as possible.

  Thank you

• When I start the machine, continuous hard drive work for almost 1/2 hour, meanwhile if I open a program, the machine runs very slowly. Help solve the problem please

  I have wndow XP Home edition service pack 3 installed on my lap top. When I start the computer the hard drive continues to work for almost 1/2 hour; Meanwhile, if I open IE, or any program, the machine runs very slowly and I just can not open the program up until the drive hard light is off. Please help solve the problem

  How much RAM you have on your system? (Right click on "My Computer"-> properties)

  As a general rule, Windows XP does not work well if you have less than 1 GB or more of RAM.  What usually happens is that your RAM capacity is exceeded leading to overflow on virtual memory (the drive) to compensate for the need of RAM in the computer.  This causes your system to beat on your hard drive and slow down your system.

  If this is your problem, the options are to increase the RAM on your system or decrease the non-essential programs that launch at startup on your computer using a tool like Autoruns.

  HTH,
  JW

• X120e - Help! BIOS problems!

  Hi again,

  I'm getting some strange behaviour in the bios. One of them is that I can not activate the AMD V (TM) technology. I allow it, save the changes and reboot. The value is returned to the people with reduced mobility.

  Also, sometimes I lose some of the tabs in the bios, which is the Startup tab. I have to Load Setup Defaults to have that tab back, although I did not change in the bios.

  Another thing is that I can't get the boot of diagnosis. I always get the quick start (with the lenovo logo). Cannot enable the diagnostic startup.

  What is going on? Is the bios software buggy, or my Board is saying 'goodbye '?

  abvasili

  Hi abvasili,

  I've got your MP about your request for help for this problem of fixing on the center of services because of your first experience with them.

  Please give me the info I need in my MP replied you.

  Thank you very much!

  Kind regards
  Cleo

• Starting problems. - RunDLL32.exe, procedure entry point_except_handler4_common could not be located in the dynamic link librarymsvcrt.dll

  I get the message RunDLL32.exe, procedure entry point_except_handler4_common could not be located in the dynamic link librarymsvcrt.dll. What should I do?

  I had starting problems, boot loop, I think it seems to have been resolved by using the last known good configuration, but I get this popup dialog box. I've not closed for fear that it will start XP looping again.

  Hi EddieBryan,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. when exactly you receive the error message?

  Method 1
  Check if the problem persists in safe mode and after return with the result.
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Method 2
  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.
  I suggest that you configure the computer in a clean boot state and check if it helps.
  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  See section to learn more about how to clean boot.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start , then click run.
  2. type msconfig , then click OK.
  The System Configuration Utility dialog box appears.
  3. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Method 3

  If the previous step fails then I suggest that scan you SFC on the computer that will search the corrupted system files and try to correct them.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  You are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker

  http://support.Microsoft.com/kb/900910

• starting problems with service pack 3

  I updated my Compaq Presario online from SP2 to SP3. My computer will not now start in normal mode. He'll start secure or secure with networking.

  Hello

  1. installation launched successfully?

  2. don't you encounter any error message when you start the computer in normal mode?

  If you have an Intel, refer to the article below and check if you are able to boot to the desktop successfully in normal mode.

  Error after you upgrade a computer that uses one processor other than a processor of Intel for Windows XP Service Pack 2 or Service Pack 3 for Windows XP: "STOP: 0x0000007E"
  http://support.Microsoft.com/kb/953356

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Win 7 intermittent starting problems

  My wife birhtday, I bought a new desktop PC 500-281 HP Pavillion through Win 7 clips in July of 2014. Intermittently the machine hangs at startup. Usually, he gets to "Starting Windows" screen and freezes, windows logo is not launched. When I shut off and restart, usually the screen asking if I want to start windows normally or start the Startup Repair utility. Should I choose one of these options and the machine works very well, sometimes I can shoose an option and the machine hangs again. Startup Repair shows no problem. When I'm on Windows I ran antivirus (AVG, McAfee, bitsMalware IO) analyses all upward with no problem. The machine is connected to ethernet (not wireless) a of the USB connections and: mouse, keyboard, external hard drive WD, printer Canon, Logitech webcam. All of this worked well on the old box. I have checked/updated all the drivers for external and all devices are updated. I checked the BIOS and Windows Connection Manager is the first start. This is a report of start-gel 60/40 at the moment and it happened that the staples of 14 days return policy. Any advice? My wife is extremely frustrated! (as a result so I am!)

  Hi Bob,

  I would test equipment (systems and components) to restarting your PC and pressing "ESC". A defective material is usually behind on a new PC erratic behavior. Despite a software driver problem which is very unlikely, component, causing this type of symptom can be the power supply. This point of failure (power) is not detected using HP diagnostics. If material tests pass and this isn't a software driver problem, through the process of elimination, it can be the power supply.

  In the start menu select F2 and run diagnostics.

  If all tests pass, try to use the PC with HP supplied only devices (mouse, keyboard, and Ethernet connection) to see if the system stabilizes.

  Let me know how it goes. We can try additional troubleshooting if the advice above does not help.

  Finally, you need to maybe to back up important data and do a factory restore. Then, run the system without installing any additional software and only HP devices connected.

  Always start problems? Now is the time to contact the HP Support.

  When our spouses are unhappy, we are miserable!

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  810-150se office
  17 t - j000 Notebook
  H8 1380t CTO Desktop
  560z Desktop

• Computer starts: problems

  I recently had a lot of trouble to make my computer with Vista at startup, it would work sometimes, other times re-launch at startup. I thought that this could be a windows problem, so I tried to re - install windows when I finally got to do the start, he did the process from the beginning until he wanted to re-start, he would have still not finished, so I opened my computer, grabbed with the RAM and BOOM, it worked fine, installation was always pointing however. I was given an option every time when I turned it to either go into Configuration or vista. I turned and walked away earlier and he went to the installation, when I came back he expanded windows for installation files, I said to myself, there is no reason to spend with it when my computer is running, so I cancelled it and now it won't start windows or let me install windows.

  Hello
   
  Follow these steps and check if your computer starts very well.
   
  Step 1:
   
  Remove all external devices and check if that helps.
   
  Restart your computer and press f8 and see it it gives revert the installation program.
   
  Step 3:
  If it does not have a configuration of the previous version, you may need to perform a custom installation.
  Reference:
  Installation and reinstallation of Windows Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Satellite L - starting problem

  I used my new Toshiba laptop about 6 months ago - no prpblems. These last days I have starting problems. I turn it on and Toshiba logo appears on the screen, and Windows does not start. Toshiba Logo remains on as frozen screen and laptop keyboard does not respond. I turn it back on works and that's okay - wimdows starts normally. Startup Repair does not detect any problems.

  What can be?

  Hi oktay,.

  What model of laptop you have exactly? I can t find this information in your ad.

  If the laptop hangs on the Toshiba logo, it has nothing to do with Windows and it s hardware related issue.
  Have you connected external devices? If Yes, remove them all and try to boot up your laptop.

• I'm stuck on my * address email is removed from the privacy * email account I am still getting this error code 80048823 I can help get this problem?

  I'm still stuck on my * address email is removed from the privacy * e-mail account. I get this error code 80048823. Can I get help with this problem?

  Hi Rutherford,

  Since the problem is related to Windows Live, you can also send your query to Windows Live Solution Center.

  Portal - Messaging Windows Live Solution Center

• I need help with a problem of file softdub.dll any answers or how to replace it?

  I need help with a problem of file softdub.dll all the answers, or how to replace it?  Yes, it's a problem of Vista vs itunes and apparently I lost? This file somehow.  I have no idea how blessed remedy.  I tried all the normal fixes / easy I know, but I am a novice at best.  so please, be gentle and try to guide me through a response.  Please, I beg you!

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem.

  Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem?

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Seeking help with a problem with the LR I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message, "could not create a JPEG sponsor limit you 92 k Bytes.Plea.

  Seeking help with a problem with the LR

  
  

  I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message.

  "Could not create a respondent JPEG limit you 92 k Bytes.Please increase the size limit files
  . (1).
  .....

  I tried to increase the size of the file several times,

  I left LR

  I restarted the computer.

  
  

  Any help or advice for this problem will be greatly appreciated

  
  

  Thanks in advance

  
  

  @stu

  Not because of the number of pixels, in this photo and the chosen level of quality there is no possible way to create a JPG file to the size of file you requested. You must change your export settings.

  Show us a copy of the export dialog box, so we can see clearly the part file setting and the size of the Image.

  Also indicate the number of this image (width and height) pixels after cropping (as appropriate) and prior to export.

• Error 213:10 on windows 10. Please help solve the problem

  Error 213:10 on windows 10. Please help solve the problem

  Different code, but can help - error 213:19 license https://forums.adobe.com/thread/1907953 because of write permissions

  Run all programs as Administrator http://forums.adobe.com/thread/969395 to assign FULL... Permissions said yet, but it is sometimes necessary for Adobe

• Get error 207 trying to download creative Cloud and someone please help with this problem, thanks in advance please.

  Get error 207 trying to download creative Cloud and someone please help with this problem, thanks in advance please.

  Please refer to

  Error 207 to "install Adobe".