Help! Lenovo Z470 Cant detect the wifi routers. :(

Similar Questions

• EOS - 6 d: iPhone 6 s not able to detect the wifi of 6 d

  I recently changed my phone from 6 6 s 6 s iPhone iPhone iPhone was not able to detect the wifi of the camera. My mini iPad 2 was able to detect the wifi of the camera. This is a known issue and a solution for this? Thank you in advance.

  Communitty one Apple provides some tips. It turns out that I just needed to restart my phone to iPhone detect the camera wifi signal. Thanks to everyone who helped me.

• OfficeJet 6500 e710n: my can´t officejet 6500 detect the wifi router, expire after 20 minutes of searching. The network works

  Hello

  I connected to a router Thomson lapttop two stand-alone and two desktop PC wifi printers. As I can connect to the web

  and surf without problem that the router seems to work at least partially.

  The problem is that printers will not find the router, when I try to configure the printers in the control panel printers, they are looking for the router, but they do not find the wifi (router) connection. After 20 minutes, they then expire without something else facilities worked very well before.

  I called the support to my ADSL provider and they remotely reset the router to factory settings initial but it helps. didn t have tried to turn off the router, printer and laptop computers and then started the router, printers and portable - the same problem. I think that the problem is not in the printers that I have the same problems on both printers.

  Can it be a partial problem with the router, I find that it is unlikely that the problem lies in the printers, because they took place att simultaneously.

  It is a mystery to me and any suggestions are appreciated.

  Bo

  Hello

  It seems more likely that the question is based in your router as the problem affects two different printers.

  For troubleshooting end please move the printer near the router, but not too close... 2-3 meters would be at an ideal distance for testing.

  If you don't see the router yet, may is a Dual Band router?

  It broadcasts at 2.4 GHz?

  Pleae also run a Test report wireless one of the printer, it may help to get a better understanding.

  In the Configuration Menu, select network, go search for Wireless Test report.

  If you can join an analysis of the results of the tests, it would be great.

  Kind regards

  Shlomi

• HP Pavilion 14e016tx - cannot detect the WiFi connection

  My HP Pavilion 14e016tx (win 7, 64-bit, rt3290 ralink 802.11) does not detect WiFi connections. Sometimes it does not detect, but when I try to connect, it still shows the failure message ("windows could not connect to xxxxx & quot.") No idea how to solve this problem? Update the driver or solutions?
  
  Any kind of suggestions are appreciated! Thank you.

  Hello:

  I don't know which driver you used, but you can get the latest being for this map directly from Mediatek (Ralink) below:

  PCIe (RT2790 / RT309X / RT35X2 / RT539X / RT3290 / MT7630)

  15/04/2014

  V5.0.46.0

  Win7 32/64 Win8 32/64 Win8.1 32/64

• E120 Lenovo Edge - cannot detect the WAN of GOBI 2000 map

  Hi, I hope someone could help.  I bought an E120 that my country does not see the X120e

  I bought a card WWAN of GOBI 2000 dealer of Lenovo.  The card passes through the white list very well although it is not mentioned as one of the taken WWAN devices supported.

  I tried to install the 7xwc48ww.exe (drivers X120e and Edge 11 WAN) to see if it would work.  The GOBI loader installs, but the driver does not load, sense - in device - PORTS - Gobi charger Manager

  -In device - network adapters - No. Gobi WAN Card Manager

  I also tried the solution-http://curiouslynerdy.com/2009/05/qualcomm-gobi-wwan-card-on-windows-7/ , but still no joy.

  According to me, the X 120 and E120 are very similar, so I guess the Gobi WAN should be able to work.

  Can anyone suggest an alternative?

  Thank you very much!

  The E120 Edge is like the X121e GOBI 3000 or F5521gw will work. I tried a GOBI 2000 in my E120 with the same result as you.

• Not able to detect the wifi on my laptop

  I have a Dell inspiron 1525. Recently I got Hp deskjet all-in-one 2545 wireless printer. The printer beeps wifi that I could connect at once. But the next time I tried it does not work. The printer is emitting the wi - fi signal but my laptop doesn't detect any wireless network. Please find a solution to my problem.

  I don't have any other wireless networks, other than the printer.

  How you connect this laptop to the Internet when you're at home?

  Print a Network Setup page and a page of network test by pressing the wireless button and Start copy Black button at the same time (see page 6 of the user's Guide).  Please have the following information on these pages:

  IP address

  Default gateway

  The network name

  Network status

  Networks detected

  On the laptop, open a command prompt window by typing cmd.exe in the search box and press ENTER.  In the black command prompt window, type the following command, and press ENTER after each line

  ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".

  Notepad '% userprofile%\Desktop\ipinfo.txt '.

  output

  Select all the text in the opened window of Notepad (CTRL + A) and copy (CTRL + C).  Then click on in your response here and paste (CTRL + V) the information.  You can close the Notepad window and remove ipinfo.txt from your desktop when completed.

  Go to devices and printers

  Click on any icon in the section 'printers and faxes '.

  Click on the "Print server properties" button in the toolbar at the top of the window

  

  Click the "Ports" tab

  List of all the ports indicated other than LPT and COM ports  You may need to expand the "Ports" column by clicking and dragging the line between the 'Ports' and 'Description' to see the full port names

  For any port, names that resemble an IP (e.g. 192.168.1.100, 169.254.0.1), include the "Description" and "Printer" and the name of the Port.

  

• Internet connection no longer works unless I have disconnect and reconnect the wifi regularly

  I find that after a time random, maybe twenty minutes a half an hour or so, my internet connection breaks down and it can only be fixed by disconnecting and reconnecting to my wifi network.

  It is a problem on my iMac of retina 2014 running El Capitan and 2011 MacBook Air my wife running Mountain Lion (but not on my MacBook Air of 2011 which takes place in Yosemite).

  It does not seem to be triggered by almost anything, but it's maddening to have to do all the time. It's a router NetGear btw, less than a year.

  If anyone has a solution I'd love to hear it!

  Greetings, peederjigson!

  Welcome to the communities of Apple Support! It seems you have some problems to stay connected to the Wi - Fi on some of your devices. This is not how it is supposed to work so I'll be happy to help you.

  Use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - even with a new router, the firmware may need to be updated. But this article can go a long way to point out where it is.

  The potential of Wi-Fi and Bluetooth interference sources - because this is not the case with all your devices, it could be other things blocking the signal. Here are a few potential sources.

  Recommended settings for the WiFi routers and access points - because your router is "-ish" make sure that the settings are correct.

  Have a great day!

• My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  Hello BrooklynWM!

  I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

  Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

  After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

  Best regards.

• OfficeJet 6600 connects to the wifi network

  Hello

  I bought an Officejet 6600 and effortlessly connected to my wifi network, print and scan for a day. And there are two days that he stopped conntecting to the wifi network. In the meantime, our router turned off and turned back on. That's the only difference.

  First of all, the printer would not even detect the wifi network. I solved that by changing the configuration of the router (Cisco 3925 EPC) and passed under the Setup wireless "Wi - Fi protected setup" to "manual". I can now see the network on the printer again.

  But after that I've selected my wifi network and enter the WPA password, the printer tells me that the network connection is impossible. I printed a page of diagnosis, which told me that the problem is perhaps related to the MAC filter. But I have no MAC filters. I also tried to pass of WPA/WPA2 to WPA only, but that doesn't change anything.

  I also tried to set the mode wireless via the USB cable, but no avail. Everything seems to work, until the moment when he tries to connect to the wifi (screen with 'configuration' with the large antenna and pulses of radio waves).

  Should I give up and bring it to the store? I'm getting desperate!

  Thanks for your help in advance,

  Raphaël

  OK, to make sure I understand - the printer connects effectively to your wireless network, and well it works for a while once the printer goes to sleep, your computer or router may not wake.

  If this is the case there are a few things that we can try:

  1. in the settings of your router, make sure that the multicast is enabled.

  2. set the 2.4 GHz router to 11 channels.  I know it sounds weird, but please try.

  3. set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.

• cannot detect the hotspot

  I just got a HP Pavilion 15-n209eia and does not detect the wifi hotspot and even if it does, it is not stable. What could be the problem and how to fix it?

  Hello, @obehi

  I see you are trying to connect the laptop to a Wi - Fi hotspot.
  
  I can't guarantee that this will work, hot spots are not stable wireless connections. If you experience intermittent connectivity with it, then you can study more enough to connect to a source of the internet which are stable.
  
  These documents can help, but they are for a typical wireless to a modem / router and the laptop.
  
  Troubleshooting wireless network and Internet (Windows 8)
  Troubleshooting your wireless network and Internet access (Windows 7)
  
  This is all the help I can provide you with this configuration.
  I hope you can make it work.
  Thanks for posting on the HP Forums.

• Satellite Pro C660-1NQ does not detect the WLan network

  Hi guys,.

  We have a Toshiba Satellite Pro C660-1NQ here that does not at all, detect the wireless network
  I checked the Device Manager and the wireless card does not show here.

  I tried scanning for new hardware, but nothing was found. I tried to turn the wireless off tension with the function and the keys F8 but not yet showing in Manager devices or any new hardware...

  Any ideas as to what I can try next?

  See you soon,.
  Ash

  Hello

  It seems that the laptop would support the Wlan Atheros 802.11agn card.
  Usually the Atheros Wlan card must appear in Device Manager as on the menu network cards.
  If it s not appear do not then I recommend that you install the WLAN driver which can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Choose the Atheros Wireless LAN Adapter Windows 7 (32/64) 9.2.0.419.0 or newer
  I hope this helps to detect the WiFi chip!

• RALink RT3290 802.11bgn Wi - Fi adapter detects no wifi

  I use HP PAVILION 15-E015TX. I have reset my windows 8 OS recently due to a corruption of the data. After the reset of the operating system, everything is reinstalled to its original state. But the Ralink RT3290 802.11bgn Wi - Fi adapter does not detect the wifi is working normally before you reset the operating system. When I run the HP SUPPORT ASSISTANT troubleshooting option, it shows a red mark when you reset the adapter.

  I want to know how I can solve this problem.

  sat_m,

  Welcome to the HP Forum.

  Before you make any changes, make sure you have a recent restore Point / new created:

  • Create a Restore Point create a restore - Win7 Point OR create a restore point Win8
  • Have you tried installing the driver from the Web page of your computer?

  Version (in writing): 5.0.37.0

  Date: 2013-12-23

  HP 15-e015tx - Ralink 802.11 b/g/n Wireless LAN Adapter Driver

  Make sure your Chipset driver is up-to-date - then install / update the Ralink driver.

  Take a look at the other drivers to confirm that they are at the level of the version you want.

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• Wireless device detects the connection Wireless at home, but cannot connect to it

  It is a problem that I can not understand. I have a WRT54G Router. My phone can detect the WiFi but my phone can not conect to wireless network. I played a bit with all settiings on the http://192.168.1.1/wireless.htm Web page but can not understand. I think it's a software issue and not a hardware problem.

  Can someone please help? I have appreciapte any help. Thank you.

  Disable any wireless security, including the mac address filtering.

  Change the wireless channel to between 5 and 9.

  Change the width of the channel 20 mhz wireless.

  If this fails, then reset the default router may be required and reconfigure.

• Unable to connect to the WIFI network.

  Original title: Need computer help laptop to connect to the WiFi at home

  I have FIOS at home, but my new laptop is impossible to connect to the WIFI in my house, the diagnostic computer wasn't able to fix the problem, what can I do?

  Hello

  1. what exactly happens when you try to connect to the WIFI network?
  2. do you receive any error messages?

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  If the problem persists, you try the procedure described in the article and check out them.
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

  Alternatively, you can check the link for more information:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
  http://support.Microsoft.com/kb/871122

  Method 3:

  If the problem persists, you can temporarily disable the antivirus software and check.

  (a) click Startand then click run.

  (b) copy and Paste the following text in the box run command and then press enter:

  wscui.cpl

  (c) in the Windows Security window, click Virus Protection.

  (d) if the software is activated, display information about the antivirus program and note the name of the application.

  (e) click Start, click programs principally made and then look for and run the anti-virus program.

  (f) temporarily disable the software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this information helps!

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.