HP Pavilion 14e016tx - cannot detect the WiFi connection

Similar Questions

• ConnectionFactory cannot create the WiFi connection

  I tried this code example, and it returns null ConnectionDescriptor when I only have the wifi connection:

  cf = new ConnectionFactory();
  cf.setPreferredTransportTypes(new int[]{
      TransportInfo.TRANSPORT_TCP_WIFI,
      TransportInfo.TRANSPORT_TCP_CELLULAR,
      TransportInfo.TRANSPORT_WAP,
      TransportInfo.TRANSPORT_WAP2,
      TransportInfo.TRANSPORT_MDS,
      TransportInfo.TRANSPORT_BIS_B
  });
  cf.setAttemptsLimit(2);
  cf.setConnectionTimeout(10000);
  ConnectionDescriptor descr = cf.getConnection("http://www.google.com");
  StringBuffer buff = new StringBuffer();
  if(descr == null){
      buff.append("no descriptor");
  }else{
      buff.append(descr.getTransportDescriptor().getTransportType() + ";" + descr.getUrl());
      try {
      descr.getConnection().close();
      } catch (Exception e) {
          System.out.println("===>conn close error:" + e.getMessage() + ";" + e.getClass().getName());
      }
  }
  

  I tested with the mobile network and it works well and returns the connection descriptor non-zero but when I try with the wifi only and always returns null.

  I tried to access Google.com on the bb browser and it opens.

  However, the connection is slow and it loads for a while before opening google. Is this the reason why I get null handle or its something else?

  Well I solved it.

  It turned out that I had activated the VPN profile to the wifi network. When I disable the code works ok.

  But this raises the question why can't make a connection http via wifi with active VPN profile. I can always open google.com in the browser.

  I'll make a new thread for this question.

• cannot detect the hotspot

  I just got a HP Pavilion 15-n209eia and does not detect the wifi hotspot and even if it does, it is not stable. What could be the problem and how to fix it?

  Hello, @obehi

  I see you are trying to connect the laptop to a Wi - Fi hotspot.
  
  I can't guarantee that this will work, hot spots are not stable wireless connections. If you experience intermittent connectivity with it, then you can study more enough to connect to a source of the internet which are stable.
  
  These documents can help, but they are for a typical wireless to a modem / router and the laptop.
  
  Troubleshooting wireless network and Internet (Windows 8)
  Troubleshooting your wireless network and Internet access (Windows 7)
  
  This is all the help I can provide you with this configuration.
  I hope you can make it work.
  Thanks for posting on the HP Forums.

• MAX cannot detect the TPC-2106 t

  don't know if this is the right place to post this but I had to ask the question

  I t TPC-2106 touch panel and want MAX detec there, but it will not for any reason any

  I have the touch panel module and the touch screen is correctly connected to the network that my computer as well

  MAX can detect my compactrio, but it cannot detect the touch screen...

  Someone has an idea?

  Thank you

  Browse the following documents and after if you have other questions.

  LabVIEW Touch Panel Module Getting Started Guide for LabVIEW

  Getting started with National Instruments Touch Panel computers using LabVIEW

• computer cannot detect the scanner or camera

  When I plug in my digital camera Canon for my xp, then turn it on, I hear a small beep, then nothing. When I go into the Panel, printers and other equipment, scanners and cameras, I see 2 points. 1 is, WIA Canon MX310 SER. The 2nd one is Canon PowerShot SD1300IS. I then click on the Canon PowerShot SD1300IS and then get pictures, but nothing happens. The cameras screen display turns off, but that's all. It seems to be connected to the computer, but not to download pictures.

  When I keep trying I sometimes get an error message, the computer cannot detect the scanner or camera.

  How can I solve this problem and download my photos?

  Thank you Tim

  Hey volunteer J;

  Thanks for the help, but it did not help.

  I found the answer on page 2 of microsoft answers, xp, images and videos.

  6 questions down, how to re install microsoft scanner and Camera Wizard.

  It turns out that some tech volunteer known as J (is it you?} came across the solution to my problem on this site:http://www.veiled-chameleon.com/weblog/archives/000231.html )

  I have used PC Cleaner on this xp, and I think he may have disabled some of the registry keys. For me, I had to start my pitcher of DCOM Server, RPC, Remote procedure Call Locator process and put them on automatic. Once I rebooted, everything works great.

  I'm so happy that tech Volunteer J, done everything search last December. I bet it helped a ton out of veterans with our cameras. How did he find veiled Chameleon? Wow he must be smart enough.

  Thank you for volunteering j. (is it you?)

  Thank you Tim

• I've never seen the cloud on my watch symbolizing the wifi connection.

  I've never seen the cloud on my watch symbolizing the wifi connection. How to operate when phone and shows are on the same network?

  Hi, Kristian

  If your Apple Watch is not connected to your iPhone via Bluetooth, but it is within range of a WiFi (2.4 GHz) network your iPhone plugged in the front (while it was connected to your watch via Bluetooth), then your watch can connect to this network and still offer some features:

  • How to use your Apple Watch without your iPhone in the vicinity - Apple Support

  To check the status of the connection of your watch, go to the eye of parameters:

  • When displaying the time on your watch, slide up on the screen, then swipe left / right for the look of parameters.
  • This will specify connected or disconnected:
    • If it says connected and the icon in the upper right corner is a green phone, your watch is connected to your iPhone via Bluetooth.
    • If it says connected, the icon is a green cloud, then your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • If it is disconnected, your watch is disconnected from your iPhone and also is not connected to a Wi - Fi network. The icon in the upper right corner will be a red telephone with a line through it.
  • Slide down again to return to the watch face.

  To test whether your watch is currently able to connect to a Wi - Fi compatible network known as a relief:

  • When within range of the network, turn off Bluetooth on your iPhone.
  • After pausing for a short time, check the status of the connection of your watch as described above.

  More information:

  On Bluetooth and Wi - Fi on Apple Watch - Apple Support

• All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

• Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

  Try the following steps please

  The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• What will I do if the wifi connection is interrupted during the update the new os 9.1

  I already download the new ios 9, but unfortunately the wifi connection and the update of the icloud setting was not able to go forward, what I'll do then its keep on update

  Try to hang the iPad to a computer and see if you can continue installation using iTunes.

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• FP 6700: Hp 6700 loses the wifi connection

  Guard 10 Windows printer Hp 6700 lose the wifi connection that requires powering off the coast of the printer running and the cable/modem.  I tried the suggestion given in the forum, but does not solve the problem. The printer is located in 2 feet of cable/modem D5001 model pace and I have the latest software and firmware installed.

  Anyone have any ideas on how to solve this problem.

  Thank you.

  Move the 6700 further pace or connect an ethernet cable to the rhythm of the 6700.

• iPhone 5 c cannot detect the network.

  Since the last 9.2.1 update my iPhone 5 c cannot detect the network.  Constantly 'finding '.  It took to the local repair shop and he told me the imei is missing and only Apple can help.  Any ideas, thank you.

  A missing IMEI is a fatal error which cannot be set. This is usually the result of the attempt to jailbreak or hack the phone unlock illegally, but not exclusively.

  Where, exactly, do you have the phone? It was jailbroken? Never 'unlocked' by one person other than the carrier, so it was initially locked?

• Cannot start the network connection: invalid access to memory location

  Hi team,

  Windows 2003 SP2 cannot start the network connection. Error connections network service terminated with the following error: invalid access to memory location.  Can you help me on this issue?

  Thank you

  Sangaré

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server 2003 Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• EOS - 6 d: iPhone 6 s not able to detect the wifi of 6 d

  I recently changed my phone from 6 6 s 6 s iPhone iPhone iPhone was not able to detect the wifi of the camera. My mini iPad 2 was able to detect the wifi of the camera. This is a known issue and a solution for this? Thank you in advance.

  Communitty one Apple provides some tips. It turns out that I just needed to restart my phone to iPhone detect the camera wifi signal. Thanks to everyone who helped me.

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something