installed no comm with the pilot program

Hello

I have developed a small program DAQ in LabView (2013) for a "quadrupole mass spectrometer (MS) Extrel" using the very nice company LabView driver provided.

The mobile developer is a win7 x 64 system with LabView2013 Pro. The soft Extrel is installed, the portable computer can communicate with the instrument of Ms. The program works on the mobile developer of its VI, from the EXE version and I also did a version of the installer and it works too.

The portable target is also win7 x 64 with no LabView installed. I have included the LabView2013 execution engine in the first version of my Installer, and I installed it on the target computer.

When I run the program installed, it launches the native software from 'ExtrelMerlin' as it should be, but from that point to the structure of the event (see the sample driver: 'Panel_Tune Display.vi', 'ScanDataCluster': the value changes in the event structure) which should get the data (for example in every 2 sec) driver is not triggered , the program hangs, and when I go out there, it closes without error...

I have some info about this driver from LV:

  • The pilot project LabVIEW uses event callback functions to retrieve information from the Automation Server COM Merlin. This feature is not available in the Base of the LabVIEW Development System. You need the complete development system LabVIEW to run this project.
  • The LabVIEW driver uses Merlin Automation COM Server (which will be installed and configured in the configuration of the installation of the software of automation of Merlin) to access data analysis and instrument control. A custom DLL (\Extrel MerlinLV\Public\Bin\ Extrel.LVDataAdapter.dll) is used by VI files to convert data COM to compatible data types LabVIEW structures.

In the compilation of my installer options, I see that "Extrel.LVDataAdapter.dll" is registered in the dependencies. I wonder why my installed program can obtain data from the COM server on the laptop of developer (with the dev. environment LV 2013 Pro), but not on the laptop with the runtime target of...? I should explicitly include the dll in the build options? Given that the portable target only engine of execution installed?

It would be wonderful if someone with experience could tell me where to find the source of the problem...

Thank you much for the help!

Here you can take a look at the official instr.lib driver of the MS:

https://DL.dropboxusercontent.com/u/8148153/labview_Extrel_driver.zip

I got it, the experianced bug is related to some subVIs depending on the environment in the LabView project, which came from the company:

1. the LabView code begins to get data of spectrum at each scan time that after setting some parameters via LabView in the mass spectrometer software. I'm not in depth, why it works like this, but that's what I know.

2. so I realized that when I raise an event, what should define a parameter in the native MS software via a chain drive macro (sending a string on MS software through the driver interface) is not it. I checked the format of the string, which is sent to the external software of LV, and I started hitting my head on the table...

The programmer who developed the code did not have the double number--> regio of conversion of digital channel independent. Since the spectrometer of the native software only accepts the string macro with numbers command using the decimal point, the software just couldn't interpret it command as valid because the laptop targets had German Windows with ',' decimal mark... The laptop the developer had English settings, so he worked there.

I'm lazy to correct all these errors in LabView code, so I just changed the brand to the decimal point '. ' in the mobile target and voala: everything works

And I thought there is a very difficult bug, I have to deal with that

Tags: NI Software

Similar Questions

  • help me with the dep program

    I have problems with the dep program my wife likes to talk to people on facebook. but he started it after a few seconds, add something about ons in help. I'm not good with computers

    Hello

    Try to add to your trusted sites in IE - Tools - Internet Options - Security - Trusted Sites.

    https://www.Facebook.com/

    http://www.Facebook.com/

    EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
    http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

    The problem might actually be an add-on or another program to the origin of the problem and you should check that
    1st.

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
    machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

    If no joy there's something blocking perhaps.

    Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

    IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

    IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

    Close and restart IE or IE with no addons

    not better?

    IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
    "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

    Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
    are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

    Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
    are bad, but some can cause your question (toolbars are BHO).
    http://securityxploded.com/bhoremover.php

    Startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Also get Malwarebytes - free - use as scanner only.

    http://www.Malwarebytes.org/

    --------------------------------

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    --------------------

    Departure - in the search box, type-> order

    at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

    Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

    ipconfig/flushdns

    nbtstat-r

    nbtstat - RR

    netsh int Reinitialis

    netsh int ip reset

    netsh winsock reset

    RESET

    That resets your TCP/IP stack
    ------------------------------------------------------

    Maybe using Compatibility Mode will help you.

    Introduction of compatibility view
    http://blogs.msdn.com/ie/archive/2008/08/27/introducing-compatibility-view.aspx

    http://www.Microsoft.com/Windows/Internet-Explorer/features/easier.aspx

    Some Web sites are not displayed correctly or work correctly in Windows Internet Explorer 8
    http://support.Microsoft.com/kb/956197

    -------------------------------------------------------------------

    Do yourself a big favor and work through 1 above.

    How control DEP but I don't recommend turning it off and certainly not to let power off.

    How to enable DEP on or off for a program under Vista
    http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

    How to enable or disable DEP in Vista
    http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

    ====================================

    If nothing else works you can try this however I would use as a last resort.

    IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
    Online - APPLY - OK attacks close and restart IE

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • How can I measure the length of the lines written with the Paint program?

    I know that an earlier version of the painting software was able to measure the length of the lines written with the Paint program.   I don't know what version it was.   I have the Windows 7 Home Premium Version 6/1 (Build 7601 Service Pack 1, Copywright@2009.  How can I measure the length of the lines that I have the project using paint software?   Do I need to get the previous version?   How can I get?   PLEASE ANSWER!

    Hi Ralph,

    The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

    1. What is the name of the paint program?

    2 have you tried to install the software of paint in Windows 7?

    3. are you able to install it? If this is not the case, do you have an error code or message?

    4. in what version of Windows was fine paint software work?

    Please provide us with more information on the specific question to help you to fix as soon as possible.

    Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  • I have a movie that has a voice language 2 English and french, I want to delete language vocal french film, is possible to do with the audacity program and how?

    I have a movie that has a voice language 2 English and french, I want to delete language vocal french film, is possible to do with the audacity program and how?

    Hello

    Main objective of this forum is on Microsoft Products only.

    I suggest you to contact the support of Audacity for more direct action on the issue.

  • I did an installation 22.00 per month plan and can not install Photoshop, only with the lightroom

    I did an installation 22.00 per month plan and can not install Photoshop, only with the lightroom

    Hi Alex % 20arc,.

    You can troubleshoot Adobe Creative cloud download, install and update questions and we invite you to update the discussion in the case where you need help with this.

    Thank you

  • I installed photoshop cs2 with the serial number, but now, photoshop will not open because no user name or serial number correct?

    I installed photoshop cs2 with the serial number, but now, photoshop will not open because no user name or serial number correct?

    Have you installed the special version?  You must...

    CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

    https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

  • My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

    My Pc came with Photoshop elements 11 I did a factory rest on my pc and now Photoshop does not work. The error code is 213:19 I have not the disc to install it came with the pc already installed.

    I hope this will help:

    Error 213:19 | Problem is the license for this product

  • I have exactly the same problem with the radial program point not to let me install mcafee what should I do?

    I'm having the same exact problem with the point radial program does not let me install mcAfee which can do?

    There is some information about this here: https://community.mcafee.com/thread/19119?start=0&tstart=0

    If this does not help, contact McAfee technical support. They should help you.

  • Problems when I want to update my complete system Mavericks using a USB key with the installation program.

    I want to "Refresh" my Mavericks home cleaning system and I still have a USB key with the complete installation program.

    With this USB key, I installed successfully already before Mavericks. Now, I want to repeat the installation by booting from USB key. But when the installation starts early an alert appears, said something like "... the verification failed - something is changed on the volume...". "and the cant of the installation continues.

    I've archived the original "OS X Mavericks installieren.app" from the app store and I have properly prepared another USB key using the terminal app, referencing the original installer, but I still get this alert when I try to install with this new USB.

    It is necessary for me to work with the Mavericks, because it's the latest version of the system on which I can run Adobe Creative Suite CS6 correctly. With the later versions of OS X, I get problems on my Mac Pro (end of 2008).

    I wonder what could happen with my first USB data, as I have already installed Mavericks successfully with it under the same conditions and after that he never touched the stick again so far. What can I do? What is the reason for this? Y at - there a site where I can get help or advice to solve the problem or if necessary can I re-download an Installer 'fresh '?

    Thank you and what is Berlin

    You can make a bootable USB to install using this free program that will do all the work for you. Try running disk utility/repair disk be before installation.

    Bootable USB Flash Drive-Diskmaker X

  • When you try to install FSX it stops installing at halfway with the 1935 error code

    I run Windows 7 in the 32-bit version. When you try to install Flight Simulator X (who at one point does not work on my Win 7), facilities stop 1935 hal - way and gives error message. This is what shows on the small window:

    Error 1925. An error occurred during the installation of Assembly
    Microsoft VC80 ATL.type version = "8.0.50727.42" publicKey Token = .processorArchitecture ' 1fc8b 3b9a 1e 18th 3B "="x 86 ".

    Anyone an idea what I can do to fix this?

    Hi John,.

    Thanks for choosing Microsoft Community Forums.

    According to the description, it seems that you are having problems with the installation of Flight Simulator X game that you get an error message "error 1925. An error occurred during the installation of Assembly'.

    (1) did you do changes on the computer before this problem?

    If you receive a 1935 error when you try to install the software, the Windows file system transaction log is corrupted. The transaction log is used by the Windows file system to recover when a file error occurs. It can also occur if an error occurs with the installation of .NET Framework.

    Step 1: To correct this install error, you must clear the log.

    a. open an administrator command prompt: right click on start > all programs > Accessories > command prompt and select "Run as Administrator" and click "Allow" for the elevation prompt

    b. in the command prompt, type the following command:

    true fsutil resource setautoreset C:\

    c. which assumes that C: is the drive where Vista is installed. If it is installed on another drive as D:, please change the appropriate drive letter.

    d. restart the system.

    e. install the software and check.

    Step 2: I suggest you to place the computer in clean boot mode and check if the problem persists.
    A clean boot to check if startup item or services to third-party application is causing this issue.
    You can read the following article to configure the computer to boot:
    http://support.Microsoft.com/kb/929135
    Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual.

    Windows Vista and Windows 7

    1. Click Start, type msconfig.exe in the Start Search box and press ENTER. If you are prompted for an administrator password or for confirmation, you must type the password or click continue.
    2. On the general tab, click the Normal startup option, and then click OK.
    3. When you are prompted to restart the computer, click on restart.

    Step 3: Repair of .net framework and check.

    Repair the installation of Microsoft .NET Framework

    To do this, follow these steps:

    a. click Start, click Control Paneland then click on Add / Remove Programs.

    (b) in the currently installed programs list, click Microsoft .NET Framework, then Change/Remove.

    c. click repair, then Next.

    For reference:

    Microsoft games: InstallShield Error Messages

    http://support.Microsoft.com/kb/910816

    Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version

    http://support.Microsoft.com/kb/970652

    I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

  • Order of steps, replacing the old program Adobe with the upgrade program

    I just bought 3 copies of the version of windows Adobe Pro XI to replace the Adobe 9 Pro software.  I know that last time I did an update I had problems with the old software.  Initially, I deleted the old software, but the version of upgrade said while I have not had an earlier version.  Rather than delete, I think I should do something with the program.  I tried to read the information on the website I can't find anything on point.  It should be a simple process that I can reproduce at each workstation. Help, please

    You don't need the old installed software but it takes the serial number of the old software - this will be asked as "qualifying product".

    Probably (but not necessarily) find that the installation removes the old version.

  • AIR won't install after Yosemite with the error "damaged Installer.

    Error message "" Adobe AIR Application install"is damaged and cannot be opened"

    I uninstalled previous versions, using the uninstall program, deleted all files of AIR incidents, and my computer is not connected to another drive hard or time Machine. A response to does anyone know?  Thank you.

    Here is the log file

    29 oct 07:57:05 Jeremys-Airmac-2 kernel [0]: hfs: installed Adobe AIR on device disk2s1

    29 oct 07:57:05 Jeremys Airmac - 2.local mds [32]: (Volume.Normal:2464) volume: 0x7faf54078800 * initiated creation of occluding a default location: 1 SpotLoc: (null) SpotVerLoc: (null): 0/Volumes/Adobe AIR

    29 oct 07:57:16 Jeremys Airmac - Adobe AIR installer [583] 2.local: Setup starts with version 15.0.0.293 on Mac OS 10.10.0 x 86

    29 oct 07:57:16 Jeremys Airmac - 2.local Adobe AIR installer [583]: command line is:-psn_0_344148

    29 oct 07:57:16 Jeremys Airmac - 2.local Adobe AIR installer [583]: no installed runtime detected

    29 oct 07:57:17 Jeremys Airmac - 2.local Adobe AIR installer [583]: the 'CGFontSetShouldUseMulticache' function is obsolete and will be removed in a next update. Unfortunately, this application or a library it uses, use this obsolete function and contributes to an overall degradation of the performance of the system.

    29 oct 07:57:20 Jeremys Airmac - 2.local Adobe AIR installer [583]: raise with altitude

    29 oct 07:57:20 Jeremys Airmac - 2.local Adobe AIR installer [583]: launch of the sub-process with command line Volumes/Adobe AIR/Adobe AIR Installer.app - ei

    29 oct 07:57:25 Jeremys Airmac - 2.local authexec [588]: implementation of the Volumes/Adobe AIR/Adobe AIR Installer.app/Contents/MacOS/Adobe AIR installer

    29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer [588]: Setup starts with version 15.0.0.293 on Mac OS 10.10.0 x 86

    29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer [588]: command line is:-ei

    29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer [588]: no installed runtime detected

    29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer [588]: launch of the sub-process with command/bin/chmod - PAF + rw line "/ Library/Application Support/Adobe.

    29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer [588]: launch of the sub-process/usr/sbin/chown - hfRP jeremy command-line ' / Users/jeremy/Library/Application Support/Adobe.

    29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer [588]: launch of the sub-process with command/bin/chmod - PAF + rw line "/ Users/jeremy/Library/Application Support/Adobe.

    29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer [588]: launch of the sub-process/usr/sbin/chown - hfRP jeremy command-line ' / users/jeremy/Library/Preferences/Macromedia/Flash Player / www.macromedia.com/bin.

    29 oct 07:57:25 Jeremys Airmac - 2.local Adobe AIR installer [588]: installation of the silent from runtime. Installation of runtime version 15.0.0.293

    29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer [588]: Registration Applications/Utilities/Adobe AIR Application Installer.app/Contents/Info.plist

    29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer [588]: launch of the sub-process/usr/sbin/chown hfRP command-line - root: wheel "/ Library/Frameworks/Adobe AIR.framework.

    29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer [588]: subprocess chown successful

    29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer [588]: launch of the sub-process/usr/sbin/chown hfRP command-line - root: wheel "/ Applications/Utilities/Adobe AIR Application Installer.app.

    29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer [588]: subprocess chown successful

    29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer [588]: launch of the sub-process/usr/sbin/chown hfRP command-line - root: wheel "/ Applications/Utilities/Adobe AIR Uninstaller.app.

    29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer [588]: subprocess chown successful

    29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer [588]: end of the installer with the exit code 0

    29 oct 07:57:28 Jeremys Airmac - 2.local Adobe AIR installer [583]: elevated installation

    29 oct 07:57:33 Jeremys Airmac - 2.local Adobe AIR installer [583]: launch of the sub-process with command line AIR AIR.framework/Versions/1.0/Resources/Adobe Library/Frameworks/Adobe Updater - installupdatecheck

    29 oct 07:57:33 Jeremys Airmac - 2.local Adobe AIR installer [583]: end of the installer with the exit code 0

    29 oct 07:57:34 Jeremys Airmac - 2.local Adobe AIR installer [600]: Setup starts with version 15.0.0.293 on Mac OS 10.10.0 x 86

    29 oct 07:57:34 Jeremys Airmac - 2.local Adobe AIR installer [600]: command line is:-installupdatecheck

    29 oct 07:57:34 Jeremys Airmac - 2.local Adobe AIR installer [600]: installed the runtime (15.0.0.293) located in Library/Frameworks/Adobe AIR.framework

    29 oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer [600]: pingback request execution

    29 oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer [600]: Pingback request ended with the HTTP 200 status

    29 oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer [600]: from DURATION background update checking

    29 Oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer [600]: download update start background of http://airdownload.Adobe.com/air/3/background/MacOS/x86/patch/15.0.0.293/update

    29 Oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer [600]: unpacking http://airdownload.Adobe.com/air/3/background/MacOS/x86/patch/15.0.0.293/update users / jeremy/Library/Application Support / Adobe / AIR / Updater / background

    29 oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer [600]: update of the Runtime is not available

    29 oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer [600]: unpacking cancelled

    29 oct 07:57:35 Jeremys Airmac - 2.local Adobe AIR installer [600]: end of the installer with the exit code 0

    29 oct 07:58:36 Jeremys-Airmac-2 kernel [0]: proc 617: load the code signing error 4 file "Adobe AIR Application Installer".

    29 oct 07:58:36 Jeremys Airmac - 2.local amfid [254]: / Applications/Utilities/Adobe AIR invalid signature of Application Installer.app/Contents/MacOS/Adobe AIR Application Installer: 0xfffefa2a

    29 oct 07:58:49 [1 Jeremys-Airmac-2] com.apple.xpc.launchd (com.apple.xpc.launchd.oneshot.0x1000000f.Adobe AIR install [617]) Application: Service came out because of the signal: killed: 9

    I have a similar question with one of my clients. The reason was the app was signed by the self-created certificate, which is (obviously) not recognized by the system. Try going to system preferences > Security & Privacy > General and change "Allow downloaded applications on" setting.

  • my apple MacBook Pro laptop is compatible with the new program of the Creative Suite 6?

    I own a laptop Apple MacBook Pro, I currently have the operating system Mac OS X Lion 10.7.5.

    my laptop is 13 inches not one 15-inch.

    Here are the following info on my apple computer below:

    Processor Intel Core i5 2.5 GHz

    Memory DDR3 4 GB 1600 MHz

    Graphics  Graphics Intel HD 4000 384

    Software  Mac OS X Lion 10.7.5 (11G 63)

    I want to assure you that the new program of the Creative Suite 6 is compatiable with my Apple

    computer before buy you. my mother last year had brought me the program creative suite 5

    for my desktop Dell however, this computer later crashed and now I'm stuck with

    CS5 program, my mother brought, because this version of this program, she brought is

    only for a desktop computer computer who has a windows operating system not for a Apple

    computer with a mac operating system. at the time my mother nor I knew, if I

    would receive a new computer apple, I need the program for school while I

    could work on assignments at home. Now I'm currently stuck with the

    Windows version of CS5 program which I'm unable to all. I tried to install it on

    my computer apple laptop several times before but, I only finished upward to say an error message

    only software I had would not install on the computer for some unexplained reason.

    Post edited by: mzpretty3

    Hi mzpretty3

    Please see the Minimum system requirements for CS6: http://helpx.adobe.com/x-productkb/policy-pricing/cs6-system-requirements.html

  • I installed 10 PSE with the 32-bit disk.  What should I do to change the disc 2, 64-bit?

    I installed 10 PSE with disc 1, 32-bit.  What should I do to change the disc 2, 64-bit?

    No problem. Photoshop Elements is only 32-bit but runs on 64-bit systems, this is why he settled in Program files (x 86) rather than the Program Files folder, which is reserved for 64-bit applications.

    Photoshop Elements is not available in 64-bit.

  • Premiere Pro CS4 - problem with the monitor program.

    Hello. I am not able to solve the problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline panel and read it in the monitor program, vision in the monitoring program is not monitor of race: black or a small part of the picture appear... sometimes changing colors. ASUS P5QPRO Intel 9550 and Sparkle Nvidia GeForce 9800 GTX + 1024 DDR3; directX and the latest gpu driver are installed. Different configurations of Strath discs have been tested. Where I'm wrong?

    Although largely in the max. PrPro range, which is always likely to much larger size than that required. This ARTICLE will give you general information and a workflow possible.

    Coming from the camera, JPEG should be RGB already, so no problems with CMYK.

    Good luck and hope that helps.

    Hunt

Maybe you are looking for

  • White screen with error

    I have an ipad pro for a month. The pro was working fine until yesterday. Yesterday, Philippe, I worked with the pro, it frooze. A white uppears screen with the error of activation of words. I have to restart the ipad. Today, when the battery gives m

  • Default reset screen display needs.

    This morning I turned on my PC (using XP Home Edition) and the screen was wrong. I returned it to full width, but it is now stuck on 800 pixels. Whe I click with the right button on the desktop and go to properties - settings. He tells me that the dr

  • How to create a model of Windows mail with link to FB

    I have Vista and use e-mail in the business environment. I would send already made model with special format text and images used for links. I would like to use a picture from Facebook to access my company page and my company logo to post a link to m

  • Export / import process needs some clarification...

    Greetings,What a great tool!But how this tool to produce something that appears in Photoshop does not work in my case.Latest Photoshop (Mac) 2015.5.1 and... How do not want to show an extension I created (window-> Extensions).In my way (Mac-> Applica

  • Installation of Adobe Creative Suite Premium

    I have one of the first issued CDs of 'Adobe Creative Suite Premium' (6 CD). My computer is a Windows 7.0 desktop PC.Recently, I reformatted my PC and now I want to reinstall the Adobe product above.I have three serial numbers for this suite of produ