help my pc does not start the only way is in safe mode
I tried to restart but nothing works I don't know what to do and I have no recovery disk.
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.
There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
See you soon. Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do
Hello
1 did you changes to the computer before the show?
You can try the troubleshooting provided in the link below steps to fix the problem.
Computer stops responding with a black screen when you start Windows XP
-
Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do
You have all the features non-essential related to the machine?
Have you installed a new hardware or software recently?Try to do a repair install and see if it corrects the problem.
-
Can anyone help - LR5.3 does not start after only 2 days of success!
2 days ago installed LR5.3 test on my new PC bought to run LR and CS6 - Win 7 Pro, Xeon E3-1230, 32 GB memory, SSD, etc (the work).
Worked fine for 2 days, a great trip, a lot of adjustments of cataloguing. Yesterday, I found LR had unexplained errors and dropped / closed, but I was able to reboot and my catalogs open has allowed new actions and everything was fine.
Now today the PC does not LR5.3 of the icons of the office or .exe files that I locate through Explorer. I tried the repair of the LR5.3 to Setup Adobe - no improvement after the repair - and then a complete have reinstall since installing Adobe but still no recognition/operation of LR, either when I click the icon of the office or go to the .exe files.
My other software (minimal, no conflict there) works very well since the program exe files and my internet browsers are fine.
I now have a brand new with no LR after two days of positive computer.
Can someone help here?
Next step: remove the preferences file: (or-trashing-)-the-lightroom-preferences-fichier http://www.lightroomforums.net/showthread.php?14226-Resetting-
as it will survive a regiment to install/uninstall/reinstall.
-
Please help: Windows XP does not start error message: STOP: 0 x 00000024
Original title: Please help: Windows XP does not start.
Windows XP does not start, there is a message: STOP: 0 x 00000024. and run CKHDSK/F to check for hard drive corruption. But I don ' t know how to make it work? Please help, thanks.
If this is the message you get, then you have multiple problems...
1, xp should be on the C: drive, not F:
Default C: is for the OS only. With xp on drive F: and you use only a hd
then the hd must be formatted and all partitions deletion (unless there is a relocation
the operating system is present). Install the xp installation cd, boot the pc on a cd (some PC need BIOS
be defined for this, (boot priority), once at the cd menu, press r for recovery console, select 1
for the C: drive, press enter for the password, type: Diskpart in diskpart, see all partitions, delete all,.
Create one, press the key type, ESC: EXIT leave pc reboot, install xp from the cd, format it when asked.
Read kb307654 or kb314058
-
Equium A100-338 does not start the OS Vista - update Bios?
Hi guys,.
My laptop (a few months) decided to die and was told by tech support that it might be because of the BIOS. The problem is that the computer does not start the operating system (Vista) and the update of the BIOS available only is the version of windows. Are there any other mirror to get the traditional update or even a way to convert a the update the BIOS from Windows startup disk?
Thank you
Hello
If you can see that one version of BIOS on Toshiba page then only one version exists and is available!
> The problem is that the computer does not start the Vista operating system
I don t think that BIOS could be responsible for this problem.You must first provide more info on this problem!
The laptop goes to home Toshiba screen? Have you tried to recover the laptop with the Toshiba Recovery CD?Please provide details!
-
My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.
I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...Hi Srimotu,
· You get an error message or an error code?
· Have you made changes on the computer before this problem?
Follow these methods.
Method 1: Try starting it in last known good configuration.
http://support.Microsoft.com/kb/307852
Method 2: Try to start in safe mode.
http://support.Microsoft.com/kb/315222
If you are able to boot into safe mode, try a clean boot.
http://support.Microsoft.com/kb/310353
Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.
Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.
Also disable automatic restart in the event of system failure
-
Hello
I need help! I use photoshop a lot. I started at level 10 windows and it wiped my photoshop. I downloaded again, it does not start the installation. I tried redownloadeding and it says it can not extract it because all the parts aren't there. Would love to be happy again with photoshop.
Hi Mark,
You can download Photoshop elements by using the following link: Download Photoshop Elements | 14, 13, 12, 11, 10
Be sure to download the two files available for download.
Kind regards
Rahul -
I installed the new version of LIghtroom (2015) compared to the creative clouds. Creative cloud said that I installed the new version. However, the shortcut icon that has been installed does not start the new version. I also went on the link properties itself, but without success in starting. How to launch the new version?
Thank you, toinimj59. I did this part and the installation is complete (there is apparently not earlier--included an acceptance of the general terms and conditions...)
Solution 1: Disconnect from the desktop creative cloud app and reconnect
- Disconnect from and to, the app Office creative Cloud click here for instructions to return in
- Launch of Lightroom.
-
When the Active Server is shut down normally, the passive server does not start the service
Hi friends,
I have a question for the vCenter heartbeat,
When the Active Server is shut down normally, the passive server does not start the service.
Is this normal?
Thank you.
He starts the services on the passive server because the correct judgment still leaves the server active as being the "main".
Stop all services of it properly. And after it comes back online replication starts as before, so that no service must be started on both servers. (in this case that you will have questions)
Please note that on a server computer, you have 2 possibilities to "stopping down": the BONE and the option of status and control of the server Vcenter Heartbeat
See you soon!
-
CS6 does not start, the trial version will open instead of the real version
After reinstalling my system of time machine cs6 does not start, the trial opens instead. Serial number is not accepted. What should do?
Hi MFGTG,
I checked the serial number and found that there is a problem with the serial number.
I advise you to please call our 800-443-8158 support or start the conversation by clicking the below link
http://helpx.Adobe.com/contact.html
Thank you
Kapil
-
Firefox Pei does not start the Profile Manager. Firefox version: 50.0
Firefox Pei does not start the Profile Manager. Firefox version: 50.0
Have you tried; Type of topic: profiles
in the address bar. -
Help my pc does not start after you have uninstalled the video driver
Please help my pc usually start more after I uninstall my nvidia driver mx/mx 400 with YourUninstaller I try to use this option to uninstall my driver in super mode then prompt YourUninstaller and asked "do you want to restart your computer now" then I click Yes but YourUninstaller software now on the race because the YourUninstaller has finished remove the registry left behind by uninstalling normal after that there is no register found after scanned. Then I click Next, then I closed this request. Then I restart my computer manually but blocked windows then I wait 5 or 10 minutes, but do not restart Windows. I turn off my APR, then I turn on my pc then windows does not start. I try to reformat but it's the same story that windows does not start. I try to remove the cmos battery hoping it will solve then it works. But the problem is that I insert my bootable cd, it runs automatically even I don't not press a key on the keyboard, the process to continue installing windows, it sounds I can not install my windows correctly. When he restrart the process goes again to load all the drivers everywhere why did this happen? Is there something wrong with my HARD drive once I used YourUninstaller?
RAM of a problem with you, I guess. Remove the RAM and clean including the slot of the motherboard.
http://www.computerhope.com/beep.htm
If this post answers your question, click mark as answer .
-
Satellite L450D - 13 X does not start the system - PXE - E61: Media test failure
Hello
I turned on my laptop after only a day and it will not load
As a first step, he said start the system restart or start normally,I chose startup repair, but it does not complete the repair.
It now comes with a repetitive screen with PXE - E63: media test failure, check cable of
PXE - MOF: exit ROM PXEI tried Googling the answer and go into the BIOS menu and to the section boot but I can't seem to change anything at work.
There are, and exclamation mark in front of what I think is my hard drive on the screen
! HDD1/SSD1 TOSHIBA MK2555GSX-(S2)
CD/DVD HL - DT - ST DVDRAM GT20N-(S4)
FLOPPY DRIVE
LANI have nothing in the disk drive and I don't have a recovery disk.
Any help would be appreciated
Thanx
Leon
Hello
For me, it looks like a malfunction of the HARD drive and so the BIOS can not find a bootable device and goes to the last possible bootable option which is LAN.
The exclamation mark in front of the HARD drive indicates that there is a problem with the HARD drive so I think you need to replace the HARD drive and you need to reinstall the system.
PS: What laptop do you have exactly?
-
Please help send the laptop to repair costs more than the laptop... can I now an expensive paperweight? I remember well, here are the details:
-bsod STOP: 0 x 00000050 (0xE967206E, 0 x 0, 00000002 00000000, 0X836A8510)
-tried to restart, all options on F8 does not.
-No installation disc available as it was only an upgrade to vista (tried the upgrade disc, didn't work)
-recovery disk proven system of point of sale without success.
-every time we it reboot go to the black screen with the bar where the green bars run on the side but always goes back to bsod.
-System is an ACER EX4630-4126
-BSOD popped up all while surfing internet
-is the new software installed spybot s & d
-can not run memtest because it does not start up vista
-tried running the memory diagnostic tool but it shut down on me before completing the diagnosis
Any help would be greatly appreciated. I'm not much of a person of the laymens terms computer wouldn't greatly appreciated. Thank you.
Ainjel Hello,
This occurs generally early in the boot process. For example, the problem may occur shortly after the splash screen appears, and you will see a black screen with a moving progress bar. Specifically, this problem occurs generally when the system tries to load the i8042prt.sys driver. The problem only occurs in certain hardware configurations.
You need the installation disk so that you can try to perform a system restore which is the WinRE recovery environment and then once you are able to start, you can try to install the fix below:
Error message when you start a Windows Vista-based computer: "STOP: 0 x 00000050 PAGE_FAULT_IN_NONPAGED_AREA".
http://support.Microsoft.com/kb/939720
Do a restore from WinRE system:
Kind regards
Savan Microsoft technical support.
Maybe you are looking for
-
How can I remove the default awesome bar visit link?
I just upgraded to firefox v43.0.1 and the awesome bar began including that this "visit < URL >" link whenever I have started typing a few letters. It's driving me crazy. The only thing I want to show that it is my favorite items (i.e. marked with a
-
I was never able to get the update to Firefox version to read, so I'm on AOL Mail base, because they do not support the old version, which has been replaced and updated 30 times, if not more. I need to get it to show in my system and I was not able t
-
Satellite A500 - how to restore the factory settings after upgrading to Windows 7?
Hello Since I have updated my OS to Windows 7, I have a few problems. In general, I noticed my laptop would ' t work as well as it was running Vista 32 bit. Especially with games online (souch as counter strike 1.6). The problem is that I have for my
-
While trying to solve a problem with IE 8, I have a problem trying to run a clean boot. When I start up I get a message on change in the config file. Click ok and sys config is displayed. Now, if I make a modification, OR not, I get an error message
-
Problem on Blackberry storm 9530
In Blackberry storm 9530 I'm having a problem with the hover or pointer. The application works fine in the old versions, 8800 and 9000 but storm buttons (Tourch screen), scrolling not working properly? When I'm howering buttons it wont light up to le