Help! New Linksys E3000...

Similar Questions

• Windows 7 Home Edition Premium and Linksys E3000 and configuration problems with Dell/Broadcom half mini wireless 1501 wireless adapter DWLAN

  I'be been on the net looking for an answer requarding my Linksys E3000 router and my card adapter Mini PCI Dell/Broadcom DWLAN (DraftN) haf installed on my laptop Dell Inspiron N7010 XL 17 R and the inability to configure the card so he gets the same speed-172 wireless MBps_ as does our HP Vista Home Premium SP2 Laptop and Desktop! Yes, I spoke with Dell who seem to think that all their problems Tech and resolutions can be found with their technicians of the Manila-based Super (Word of warning-do NOT enter into the world of the concierge program of Dell Tech who, after having been assured it is based in the United States, I agreed to be a beta tester and lost my harddrive despite numerous attempts to stop the technicians to access remotely to do stupid things - but the new live Webcam and learn the hard drive but got none of my software original Dell with it as promised, too - another story). In any case, after playing with the DWLAN share of Dell said they question-nope Linksys ' cuz of course my other two computers would be quick at the speed they do. So I get ahold of Comcast, who of course told me, it's a matter of DELL. I have the WPA2 encryption on a network secure, but because my router there is no way to set up a "secure" network guest unless I have disable access to him (seems odd, he says: it is not guaranteed when someone trying to pass over the network, has knowledge password-weird with this router) it is anyway with this mini half DWLAN and the fact that it is not near the speed as the two other wireless adapters. My problem is with the speed I found all kinds of tips for use between Comcast Modem and Linksys router to make your network hum. What I want for now is someone to tell me how to configure this adapter on this Dell computer, so it does the job, it should. I have a program of diagnosis with her and from what I see, I must get off channel 1 as there is too much interference, but before I go and change the settings of the router, I want the adapter to work - especially since it's about 100 Mbps slower than our other wireless adapters. Does anyone know what should be the correct settings for this DWLAN 1501 or that I now need a new adapter in this laptop as well? Thanks for your help.

  LindaSView

  Hi Linda,.

  Have you tried to forget an instant wireless and bypass the router and cable connect directly to the modem to see if you get the speed you want in this way?  Yes, I know that this means to temporarily suspend the internet connection to the local network and also means the creation of a special no wireless connection for this computer.  But it could help determine if the problem is the computer and the router or wireless adapter - which excluding at least.

  If it works fine, then you can pass the wireless problem.  Otherwise, if it is still slow with a direct link, then you may need to consider another problem is involved and the router and adapter can actually be very well and you need to focus on all that is the bottleneck.

  I'm suggesting this to eliminate the possibilities that can be the underlying cause, while you spend your time on the development of bad (although I admit that I think that you are right and it is more likely - it can be useful a test just to be sure).

  Good luck!

  Kosh

• Linksys E3000 (changed to 199.182.166.168 DNS servers) No. Playstation Network Access

  For a month I got weird pop ups on my IPAD, ANDROID phones, desktop computers AND home. I just thought that I had a bad month and I need to spend more time with my individual devices and get clean them. I then noticed recently, last week I was unable to connect to the Playstation network (NAT Type failed, the Internet connection Test failed). This was happening on my PS3 and PS4. I direct connect of PS4 and PS3 to my Modem cable from Time Warner and I have no problem. Everything works fine. But when connected to wireless or wired to my Linksys e3000... no dice.

  I connect to my router and so some research. I noticed that my DNS servers are 199.182.166.168 and 199.182.166.169. I decided the router and then restart my cable modem. Routers Gets a new address and but there are still some problems with the connection to the network Playstaiton (could be downwards). I noticed that my IP DNS address is different.2xx.xxx.xxx.xxx.  I restore the configuration on the router and DNS goes back to 199.182.166.168.  This is all the information I have at the moment. When I get home tonight I'll have more information.

  Does anyone else have this problem?

  Is the router configured for DNS custom or did you automatically detect DNS of the ISP service and ISP modem?

  What modem to ISP Mfr and model # do you have?

  You could ask the ISP service as well about it. Usually they don't change DNS very often.

  It is recommended to test for other DNS services if you want to use different DNS, you can use this:

  http://www.grc.com/DNS/benchmark.htm

  or http://code.google.com/p/namebench/

• Help: New pencil will work on screen for touch/scroll, but it does not write, draw or scribble...

  Help: New pencil will work on screen for touch/scroll, but it does not write, draw or scribble...

  While you do not, you use the iPad Pro, correct?

• Linksys E3000 cause Internet slow speed

  I came home yesterday and my Internet is very slow. Later, I discovered that it was because of my Linksys E3000 because if I don't have my E3000 and go directly to a cable modem, it works fine.

  I tried to reconfigure, firmware upgrade, factory reset and none of them worked. So, what happens? Any sugestion is much appreciated.

  Well, I finally highlight at the origin of this problem. It was RapidDrive from Rapidshare. As soon as I remove this piece of junk on my computer, everything works fine and fast again. I have this program that runs in the background on all my computers. Thus, makes it harder to solve. As soon as I remove, I tried running 8.5 Squeeze, he always gave me the error but my Internet speed is not slowing down.

• Update Linksys E3000

  I installed the firmware on my Linksys E3000 router.  I downloaded the software of Linksys.  Now when I connect to the router, I get a page from IBM with a "security warning" and three options: do not submit, submit anyway, and I trust this site, do not alert me again.  It says also "any information you enter on this page, including the user names and passwords, should be sent over an unencrypted connection and could easily be read by a third party".

  That is what it is?

  Tried restarting.  Still have the question.  I posted a screenshot.

  Thank you

• I can't get to a specific Web site - Linksys E3000

  Hello

  I have a Linksys E3000 and everything works fine... until last week.  A Web site, I go all the time has stopped working.  The site is Martini in the morning, www.martiniinthemorning.com.  This is a great internet radio station.  I listen to the station via other resources, but I can't go to the Web site that has a lot of features that I use.

  The details are that of any one of the computers connected to our network, I can't access the site.  When I plug a computer directly into the modem from Comcast, I can access the site.  I changed nothing that I am aware and everything worked until the Monday of last week.

  I thought it wasn't what actually on the router, but a TRACERT shows that I am.  I have a desktop running Vista, 2 laptops running XP Pro, an iPad, and none of them can connect to this site.  My iPhone cannot connect when it is on the network, but when it is 3G, it can.

  I know can someone ask me to join the TRACERT list, so here they are.  I appreciate any suggestions.

  Kind regards

  Irvin Johnson, Vancouver, WA

  tracert ads follow... a leave the router, 1 directly connected.

  The TRACERT from the inside of the network are:

  C:\Windows\System32>tracert martiniinthemorning.com

  The route to martiniinthemorning.com [216.75.53.138]

  with a maximum of 30 hops:

  1<1 ms   =""><1 ms   =""><1 ms ="" bronzelion="">

  2 22 21 21 ms 96.132.244.1 ms ms

  3 22 ms ms 21 21 ms ge-3-33 - ur01.vancouver.wa.bverton.comcast [68.85.148.193] .net

  4 22 ms ms ms 23 23 you-3-1 - ar01.beaverton.or.bverton.comcast [68.85.243.241] .net

  5 35 ms 35 ms 35 ms te-1-0-0-4-cr01.sacramento.ca.ibone.comcast.net [68.86.90.229]

  6 39 39 38 [68.86.85.181] pos-0-9-0-0-cr01.sanjose.ca.ibone.comcast.net ms ms ms

  7 37 ms ms 37 37 ms xe-11-1 - 0.edge1.SanJose1.Level3 [4.79.43.133] .net

  8 42 38 37 [4.68.18.62] vlan69.csw1.SanJose1.Level3.net ms ms ms

  9 45 ms ms 37 38 ms ae-63 - 63.ebr3.SanJose1.Level3 .net [4.69.134.225]

  10 46 ms ms 53 54 ms ae-2 - 2.ebr3.LosAngeles1.Level3 .net [4.69.132.10]

  11 52 53 53 ae-71 ms ms ms - 78.ebr1.LosAngeles1.Level3 .net [4.69.146.10]

  12 49 49 49 ae-5 ms ms ms - 5.car1.SanDiego1.Level3 .net [4.69.133.205]

  13 48 49 49 ms BANDCON.car1.SanDiego1.Level3.net [4.53.120.34] ms ms

  14 48 49 49 ms 216.98.153.78 ms ms

  15 * request timed out.

  16 ^ C

  --------------------------------

  It is the same tracert goes directly to the comcast modem:

  C:\Windows\System32>tracert martiniinthemorning.com

  The route to martiniinthemorning.com [216.75.53.138]

  with a maximum of 30 hops:

  1 7 ms 6 ms 5 ms 96.132.244.1

  2 7 ms 7 ms 14 ms ge-3-33 - ur01.vancouver.wa.bverton.comcast [68.85.148.193] .net

  3 7 ms 7 ms 7 ms you-8-3 - ar01.beaverton.or.bverton.comcast [68.87.216.21] .net

  4 21 21 19 [68.86.90.241] te-1-0-0-0-cr01.sacramento.ca.ibone.comcast.net ms ms ms

  5 27 24 23 [68.86.85.78] pos-0-8-0-0-cr01.sanjose.ca.ibone.comcast.net ms ms ms

  6 47 ms ms 23 23 ms xe-11-0 - 0.edge1.SanJose1.Level3 [4.79.43.137] .net

  7 33 ms 35 ms 35 ms vlan69.csw1.SanJose1.Level3.net [4.68.18.62]

  8 ms 34 35 ms 35 ms ae-63 - 63.ebr3.SanJose1.Level3 .net [4.69.134.225]

  9 30 ms ms 31 35 ms ae-2 - 2.ebr3.LosAngeles1.Level3 .net [4.69.132.10]

  10 31 ms ms 35 36 ms ae-71 - 78.ebr1.LosAngeles1.Level3 .net [4.69.146.10]

  11 34 ms ms 33 33 ms ae-5 - 5.car1.SanDiego1.Level3 .net [4.69.133.205]

  12 33 ms 33 ms BANDCON.car1.SanDiego1.Level3.net [4.53.120.34] 34 ms

  13 34 ms 33 33 ms 216.98.153.78 ms

  14 35 ms 36 36 ms 216.75.53.138 ms

  Full trace.

  C:\Windows\System32 >

  I mistyped the MTU size. Change the size of the MTU to 1365. Cycle the router and see if it works.

  You have already updated the firmware of the router. After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure the router. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. power cycle the router and reconfigure the router. See if it works.

• I'm unable to set up my new Linksys E1000 router to my computer dell Inspiron B130 laptop.

  When you try to configure my linksys E1000 new router I get... We can not define your... router wireless connection requires Wi - Fi connection are managed by microsoft windows.  some computers have a different wireless connections Manager... I tried to disable my dell 1470 wireless unsuccessfully lan card to get the new router loaded... any suggestions?

  Hi Devar,

  When you configure a new Wifi router immediately, you can connect to the radio

  you have to go on the wireless router and you also need an ethernet cable to connect the router to your pc wirelessly

  normally all routers come with an installation cd. But if it does not

  Open your web browser and type the ip address of the default gateway

  The IP address of the Linksys routers is 192.168.1.1

  from there, you can set the security features and everything and after that you have set up passwords and everything please connect your modem to the wireless router so that you can access the internet

  to manage your network wirelessly with the windows wireless client, please activate your Automatic Configuration WZC wireless

  follow these steps to activate the automatic Wireless Configuration

  Start menu - click on RUN

  type in SERVICES. Scroll down the list until you see SMC Wireless Auto Configuration

  Double-click and should be in service type: automatic

  and also, click Start to start the service.

  Hope that helps

• Linksys E3000 NAT open Xbox Live settings

  Hi all

  I recently upgraded my the WRT160n V3 to the E3000 router. I had the port to the front of my old 160n to get my game Xbox Live NAT settings to OPEN.  When I switched on the router for the new E3000, my Xbox Live settings are returned to the Medium (medium). I assumed that this would have happened since this is a new installation/router.

  Can someone help me configure my E3000 and Xbox Live so I can have my open NAT settings?  I only need to configure the Xbox 1. Any help is greatly appreciated. Thank you!!!

  The previous is large enough and generally useless for the configuration of the E3000 to facilitate capacity NAT open xbox live connections. 1 make sure you have a static IP assignment for the xbox an assignment of dhcp for the mac address of the xbox in creating or statically assigning an ip address to the xbox outside the dhcp scope, you set but on the same network / subnet of course. then go to the tab under applications and games and the prior port 3074, single port forwarding, both internal and external, to the IP address of your xbox. Name the rule openNAT or something that you will recognize. put a cheeck in the box to enable the rule and click on save settings to activate. Your xbox should now work without complaint about the need for open NAT xbox live test and gameplay should work just fine.

• Can't make an Apple iPod Touch to connect to my new Linksys WRT54GL Wireless router.

  Hello.

  I'm trying to set up the iPod Touch (bought for more than a year; using v2.2 (5 G 77) firmware) of the of my client to connect to my new encrypted Linksys WRT54GL Wireless router. After we entered the password (too many sensitive cases and WPA shared key) as five times, he said "Failed to join"FooBarWRT54GL"" immediately.

  The router uses the latest firmware v4.30.13 with these wireless settings:
  Wireless network mode: Mixed (you want to support the devices/clients and B).
  Wireless Network Name (SSID) example: FooBarWRT54GL
  Wireless channel: 1-2, 412 GHZ
  Security mode: WPA2 Personal
  WPA algorithms: TKIP + AES
  Example of WPA Shared key: Abunchofletters aspacetoo

  I guess that this device can do WPA Personal as she saw the WAP and requested a password. We have not had any problems with a year old 15 "MacBook Pro (2.4 Ghz and Mac OS X 10.5.8) and it's easy as cake.

  Any ideas? Thank you in advance.

  I finally got to work, with the help of Apple at the forum: http://discussions.apple.com/thread.jspa?messageID=10650288... I had to do a manual configuration. Don't know why selecting the WAP and entering his password/password didn't work.

• Linksys E3000 holds up my printer offline wireless network

  I used to have WRT54G2 and everything works fine. Then I switched to the new E3000, he couldn't pick up my printer.

  I found a solution online activate transfer IP HP Officejet 6500 192.168.1.144, it works but not more after turn off and on printer. I reconfigure my printer wireless several times, it still works just after installation, but whenever I have to disable my printer and then turn it back on, I can't reach it wireless. My network will not pick up my printer unless I have to go through all the hassle to set up printer again whenever I use it.

  I guess that this is caused by the new E3000 router because I had no problem with my old router wrt54g2. How can I fix it? Any help would be appreciated. Thank you

  If your printer takes any IP address directly from the router then you might face the problem, as the IP address of your printer will continue to change right away.

  If you know the IP address of the printer, then on your computer opens IE and in the address bar, type the IP address of your router, once you connect to the printer Interface, then you can configure a static IP address to your printer which is outside the list of DHCP client table.

  Once you have done with the configuration, then re-install the printer software and that will solve your problem.

• Need help with Linksys WRT160N!

  I had a Linksys WRT160N (version 1) for a few years. I plugged it on my desk, followed by a VOIP router and a cable modem. Internet through Comcast cable with typical 15 to 20 Mbps DL and around 4 Mbps UL (via Speedtest.net and Speakeasy). My only wireless connections have been a Wii and PS3 without any speed problems (both tested).

  I just got a netbook Samsung N150 Plus with Win7 Starter and my DL speed is only 0.5-0.7 MB/s but UL is always around 4 Mbps. But only on the netbook... everything else is fine. I tried everything to fix this... updated the firmware on the router, tested the netbook on a different wireless network to ensure that it was not the wireless adapter (works fine), checked computer wired (works fine), tried different channels, tried to turn filtering off, tried to disable the firewall, tried to disable the blocking of anonymous requests etc. I read through other posts and the consensus was to get a new router. I can't believe this is my only option. Am I completely missing a simple difficulty here? Help, please!

  Thanks (and bear with me as I'm not as technically savvy as maybe others).

  OK... I had finally straightened it. I downloaded the latest version of EasyLink Advisor on my desktop and just rested on my network software. Wireless on my netbook DL speed went from 0.5 Mbps to 15 Mbps. I don't know why... all I know is that I couldn't install the LELA original (from included CD) on Windows 7 (x 86) although I managed to install the network very well (new PC is around the age of 6 months... used to have XP). Nothing has changed in the configuration of the router settings (at least not manually), so I'm not sure why it works now that LELA is installed on the Windows 7 desktop. If anyone knows I'm curious to know why this is... just in case someone else he meets and needs information.

• broadcasting live does not appear, and I think that its connected to the "firefox" bug, please help, new mac user!

  so far, your main problem is flash player, you must include the updates Flash Player with all the updates of firefox, oh and updated player get. It's your bug I 'think '. If it is not part of the territory firefox let me know. However, will not be broadcast live, I asked them, they had little info. including, you update your browser recently - with no answer to this question, so here I am. I don't know if the flashplayer or everything that has nothing to do with live stream or not, BUT quicktime play or help live streaming right? have no idea and the new mac user. GL

  Adobe Systems, Inc. (owner of Adobe Flash) is not related to Mozilla Org in any way. Mozilla has nothing to do with updates to the software they do not create or owned by another company.

  You have a very old version of Flash installed - Shockwave Flash 9.0 r47 - you must upgrade to the latest version available for Mac OSX 10.4.
  
  http://www.Apple.com/downloads/macosx/internet_utilities/adobeflashplayer.html

• Help new case mobile p6604f?

  Hello, I recently moved my p6604f to a new business so I could upgrade to this topic (since the original case was virtually unexpandable), and I can't seem to find where I plug the power button. The plugs are POWER SW, POWER LED and HDD LED.
  
  Could someone provide me please with how and where I plug them in? Again, it is the power button. Thank you.

  Hello

  Here is the Plusgs

  POWER SW = button to start your computer

  Power led = power led when you start your computer

  HDD Led hard drive Led shows treatment of your HARD drive =

  Reset SW = button Reset/reboot/restart your computer

  Portion of the cable color indicates (+) and part white/black (-)

  See the Image

  

  In your motherboard, you will find self a SIGN with the name P17

  Put the catch in her

  

  Also visit the link for more information

  http://jackspcbuild.blogspot.in/

  I hope this helps!

  * By clicking on the laurels! White Star is a great way to say thank you on any post that you helped or solved the problem.* *.
  * By selecting 'Accept as Solution' for an answer that solves your problem helps others who are searching the Web for an answer *.

• My Y510 does not recognize my new Linksys WPC600 Wireless-n laptop notebook adapter

  Product information

  I put in the card and that it snaps, but he seems safe in there. It can easily be removed. He feels like he doesn't have all the adapter. When I insert it, Vista doesn't recognize or recognize it. The Y510 accepts only a certain type of network card? Because the click of 'plateau' looks strange and unique.

  The card definitely fine functions because I tried on a Dell laptop and it recognizes the card immediately.

  Do I have to download a certain driver for my Y510 to recognize the Linksys adapter PC laptop?

  Thank you!

  This card is the PC card.

  IdeaPads and other new laptops use Express Card.

  They are incompatible.