Linksys E3000 NAT open Xbox Live settings

Similar Questions

• NAT on Xbox Live with WRT54GS problem

  I have a WRT54GS v2 and I tried to solve the NAT problem I had whenever I have test Xbox Live.  I felt like I've done the research so much on this and I can not get it out of a moderate or strict NAT.  I did the port of release for the 88 and 3074-port, feature disabled the "block internet anonymous requests" and updated to the latest firmware and I have nothing will open the NAT.  This is the first time that I ever had a NAT problem with a Linksys router hooked up to my Xbox 360 and I want to know once and for all, what steps I must take to open the NAT.  Can someone please... Please... Please give me some instructions step by step on how to open the NAT?

  First upgrade the Firmware of the router... Download the Firmware from here , after downloading the firmware, you must update the firmware...

  Follow these steps to upgrade the firmware of the device: -.
  Open an Internet Explorer browser page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Press and hold the reset for 30 seconds button.
  Then, unplug the Dungeon to be able to hold down the reset button for another Seconds.Plug 30 the power back in and hold the reset button for 30 Seconds.Release the reset button. Now, you will need to reconfigure your router...

  If your ISP is cable follow this

  If your ISP is DSL follow this

  For X - Box: click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in the Xbox, in the start box, type 88 and type of box in 88, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (2) on the second line in the box of Application in Xbox1, in the start box, type type in 3074 and end in 3074 box type, leave the Protocol as and under type 192.168.1.20 ip address and check the enable box and click on save settings...

  (3) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  4) click on Setup and change the size of the MTU to 1452 and click on save settings...

  (5) now assign the IP given on your Xbox
  Go to the network settings on your X - Box, then go to the settings of IP address and select manual ip/static ip and enter in this

  IP address:-192.168.1.20 default :-255.255.255.0 gateway/gateway/router subnet mask:-192.168.1.1... Save settings...

  (6) also assign addresses dns on Xbox
  Primary DNS:-4.2.2.2... Secondary dns:-192.168.1.1... Save settings...

  (7) turn off your modem, router and Xbox... Wait a minute...

  (8) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn the Xbox and... test it connects...

• WRT1900AC NAT OPEN Xbox problems.

  I dove in the forums for days looking for a solution, but I can't get my Xbox to have an open NAT. I booked the IP address, port, and made sure that UPnP is enabled. What Miss me? NOTE (I did not open port 53, which causes only the router lose access to the internet for some strange reason.) Help, please!

  I think that it is a private IP address. Anything on a 192, 172 or 10 is a private IP address.  You need a public IP address which is #. ##. ###. ###

  Link >http://www.practicallynetworked.com/networking/fixing_double_nat.htm and http://computer.howstuffworks.com/nat.htm

  I recommend you ask at the service of the ISP and ask questions to get a public IP address of the router in order to obtain if possible OPEN NAT.

• Cannot connect to the Xbox Live Web site

  I can not connect to my Xbox Live account on the Web site (for about 2 months now). I tried to connect on different computers with different windows, but still nothing. Error code: 30C5C3C2D980454.

  Hello

  I tried all the steps that Eddie gave me but still nothing. I use a laptop, my husband has a normal pc and either way I can't even open xbox live Web site. Yesterday I try to enter the website through my windows phone and it works finally. So now I can connect with support technique xbox.
  Thank you for all your help.

• WRT160Nv2 Xbox Live Nat Strict and need to open NAT.

  So I have a WRT160Nv2 and I'm trying to get my nat to become unstrict for xbox live. I tried port forwarding which did not work. I tried this site http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread.id=122065 and who doesn't (I don't have an xbox 360 btw). Nothing has worked for me and whenever I mess with something that it screws to the top of the internet, so I put up the previous default values. I know how to access my router I just need to know what to enable, disable, or add to the router. Any help would be great. Thank you very much.

  Uncheck all options trigger Port and try the Port Range Forwarding...

  Port Range Forwarding-

  Application: xbox

  Start port: 53

  End port: 3074

  Protocol: the two

  IP address: 192.168.1.20.

  Check the enable box and save the settings.

  On the Security tab, leave the block anonymous requests disabled and change the MTU in 1452 under the Configuration tab.

  Click the status tab, and take note of DNS1 and DNS2 address...

  Goto the network settings on XBox and IP address settings and select manual IP settings and assign the following operations on your Xbox: P address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  Also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...

  Turn off your modem, router and Xbox... Wait a minute...

  Connect the power supply to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

• E1000 2.1 and the xbox live NAT problem (I read all the others)

  So like everyone, im having troublewith xbox live and NAT, but I feel my situation of dns is unique, so my solution is perhaps just as well. Help, please

  Modem-> Router (e1000)-> port 1 (wired): xbox, wireless: mac computer

  Configuration: Auto DHCP

  MTU: tried 1365 and 1452, currently on 1452

  UPnP: off

  NAT: on

  Port Range Forwarding - (tried reccomendations cisco and xbox, tried the verses of individual ports this range, currently at)

  (looked in the outbreak, but as I have 2 devices, if I let a range of open ports, I want that it does match the xbox)

  Application: xbox

  Start port: 53

  End port: 3074

  Protocol: the two

  IP address: 192.168.1.20

  Xbox is set to:

  IP: 192.168.1.20

  Subnet mask: 255.255.255.0

  Gateway: 192.168.1.1

  DNS: automatic

  reading only 1 dns (see notes)

  Notes:

  router port range is 100-149, so DHCP should not be a problem (I guess) if ip xbox is put out of reach ([192.168.1.20] being 20)

  In my status tab in the router, it gives me only a dns. When I look at online modem, it gives 2 different DNS.

  Each time, I have everything works a turn at a time, the computer always connects, Xbox Live still connects, but he still has the problem of nat.

  I don't think it's a matter of double nat, bc when I look at the stats of my modem there is nowhere to configure ports (seems to be the modem only 1 Ethernet only)

  Also, I noticed that the mtu of my modem is 1500 (I changed the mtu on the router, but not the mtu of my modem [it only allows me to change the mtu of my modem])

  Help, please. I've been dealing with it and try different combinations of ports and options for 4-5 hours now. I'm starting to crack: S :).

  Well, I found my own solution.  I looked at all options as what could be easier for the components to deal with.  Here's what worked:

  Computer:

  Configuration: Auto DHCP

  MTU: 1452

  UPnP: on

  NAT: on

  DMZ:

  Source: 192.168.1.100 to 100

  Destination: 192.168.1.1

  Xbox:

  I could leave it on auto dhcp mac address book bc but it looks like this:

  IP:192.168.1.100

  Subnet mask: 255.255.255.0

  Gateway: 192.168.1.1

  DNS: automatic

  Combined with a DHCP reservation [via the mac address (for the safety of the DMZ)] all of it worked.  With a DMZ, I didn't have to worry about which ports where correct.  It was just messy because I was 2 devices of connection and could not choose a single static ip address. So, the example ip ending (20) was not default range of the router of 50 numbers. Pay attention to your range of ip addresses in the router settings.

  * Make sure that your DMZ is on only a single or a partition of ip addresses, and you have other DHCP reservations for these ip addresses * you can find the mac address for xbox by accessing the network > configure network > additional settings > click Advanced settings, and not choose a 'different address', you should see a below *.

• E2000 + XBOX Live moderate NAT =... help please

  I know that this topic was beaten as a dead horse, but I still need help. I followed these instructions and double checked.

  On the Configuration tab change the size of the MTU to 1365, then click on save settings...
  Click the 'Administration' tab and disable the UPnP option and click on save settings...
  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...
  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...
  (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...
  (3) click on the status tab, and then note the DNS1 and DNS2 addresses...
  4) go to the XBox network settings and IP address settings, select manual IP settings and assign the following operations on your Xbox
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...
  (5) also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...
  (6) turn off your modem, router and Xbox... Wait a minute...
  (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

  The Xbox has connected, but I always get a moderat NAT and I'm not sure why. The xbox is suggesting I open the UPnp... but just maybe it's a generic solution.

  Any suggestions?

  Thank you!

  You have a few options.

  1. use the bridge instead of router

  2. Requests Comcast to allow you to use a residential modem instead of the SMC.

  3. use the DMZ to set the router on the gateway firewall.

  4. my personal favorite, ask ComcastLarry to set the bridge mode bridge for you so that the E2000 works as the router. For this option, look at the 37th post

• Xbox 360 - NAT open on a WRT160Nv3 HELP!

  I recently bought this router and I have big problems with connecting to Xbox 360 games. My NAT is moderate and it pisses me off because I can't find a solution to this. Please someone post a SOLUTION to this problem. The details please. I'm tired of throwing from parts and to be the only slow one with a connection.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  On the Configuration tab change the size of the MTU to 1365, then click on save settings... Click the 'Administration' tab and disable the UPnP option and click on save settings...

  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...

  (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  (3) click on the status tab, and then note the DNS1 and DNS2 addresses...

  (4) Goto the XBox network settings and IP address settings, select manual IP settings and assign the following operations on your XboxIP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  (5) also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...

  (6) turn off your modem, router and Xbox... Wait a minute...

  (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

• Problems of NAT for Xbox a Live, AC1900 Smart WiFi router model # R7000

  I can't get NAT open for my Xbox One, it is set to moderate right now. I tried to turn NAT, filtering to open, address reservation, go wireless Ethernet, port forwarding / port triggering TCP/UDP 3074.

  Any help would be appreciated

  Yes, that's all. So, your ISP is NATing your traffic. Your situation is similar to the guy with the WiMAX. I went and found this thread.
  https://community.NETGEAR.com/T5/Nighthawk-WiFi-routers/NIghtHawk-r7000-PS4-NAT-type-strict-3-issues...

  This guy had to call his ISP and ended up paying for an address public IP NAT problems. You will need to contact your ISP and either ask a public IP address, or ask them how to configure their gateway port forwarding. Read the other thread.

• I can't open a session on games with xbox live account

  I'm not sure what I did, but I can't seem to change the account information for Windows games.

  When I selected games in Windows 8, it created a fake XBox Live account.  I already have an account and I can not understand how to change the information so that it uses my existing XBox Live account.  I don't want to use this new account, I just want to use my old Xbox Live account.

  Hi thresher.

  If you press the Windows key + C

  In the bar of charms, click settings, and then change the settings of PC

  Click on users

  You will see your primary account listed.

  Under your info, you should see disconnect your Microsoft Account, click this button

  This will change your current account at the local level

  You can then click Connect Your Microsoft account once again and now synchronization with which ever account you want.  :)

  I hope this helps!

• Xbox live novice cannot open a session

  Hi guys

  I bought a xbox live gold for my boys as a birthday gift. Boys in error could not operate because they were rushing forward and did not read the instructions. They had not bought the code. I bought the code via my pc and my old hotmail account, everything seems ok with that. Return to the xbox now I get an error with the email addresses are not incorrect. Have tried to make a new identity etc just go around in circles. Help

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  • Announcement
    PLEASE READ. Introducing changes of case review & forum

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.

• c7000 and xbox live/PSN

  So my family pay for xfinity Blast comcasty so our download speed is as 80 Mbps down and 12 Mbps to the top, on the xbox on it says nat is open, so if I load black ops 3, for example the nat changes in the game said strict when connected via the eithernet cable (open or moderate if wireless) and that the game has tried to use the port UDP 3075 to the port required for a nat open in the game.

  I tried enabling UPnP port forwarding is activated alreadty and or fixed, the last thing the game menu says is add your xbox in DMZ to get nat seems to open in the game that I'm not positive what it means.

  are there other settings to change to help get good connectivity to the xbox live or PSN settings wise?

  No one in my family is super tech savey with this sort of thing so I will try to find a solution here

  Hello Light12

  Here are a few guides on what to do to make sure that the ports are open.

  http://KB.NETGEAR.com/app/answers/detail/A_ID/19844

  http://KB.NETGEAR.com/app/answers/detail/A_ID/23020

  DarrenM

• NAT on Xbox problems

  NAT strict rest type no matter what I try.
  I gave up on the phone and chat support live if I'm hoping someone on the forum can help out me. After spending 2 days with support from netgear and nothing...
  (Oh you will love this. The last support person I spoke with told me to change the settings and firmware update and guess what! My download speed is below 0.6mbps now)

  ISP: Comcast (xfinity)
  Brand modem: Arris
  Router: Netgear Nighthawk AC1900
  Firmware version: V1.0.2.194_1.0.15

  Address reservation is configured for an Xbox (192.168.1.3)
  Filtering NAT: open
  SIP ALG: disabled
  QoS upstream: on
  Port forwarding: (all listed ports use the same range of ports for internal)
  

  Yes, all ports are using my IP xbox

  UPnP: on
  DMZ server: Default 192.168.1.0

  Any ideas?

  Do not use the DMZ and port forwarding at the same time on one device

• Xbox live windows 7

  can I get xbox live via my computer which has windows 7, like I can with windows vista?

  Hello D3L4N00CH.

  Yes you can, the process is basically the same, open the network and sharing Center.  Click on change map settings, right-click on the connection you want to share, select Properties, then turn on sharing in the sharing tab. Paul Smith - MVP Windows Desktop Experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Problems connecting Xbox live/BT home hub?

  My xbox is connected to the BT home hub, but I can't connect to XBox live. I entered the web key and set auto IP address. It's still not working so hard cable to hub? How can I connect?

  Hi scottm1997,

  What operating system do you use?

  First of all, make sure that you have followed the steps in this link to connect to the Xbox.

  You can consult the following links:

  http://www.Microsoft.com/windowsxp/using/Networking/Setup/Xbox.mspx

  A direct Modem connection

  http://support.Xbox.com/support/en/us/Xbox360/xboxlive/getconnected/setupahomenetwork/directmodemconnection.aspx

  As you say that you can not connect to Xbox LIVE, you can try to diagnose the problem directly on your console. Go to My Xbox and open the Control Panel, and then select network settings, Test Xbox LIVE connection.

  In addition, follow the troubleshooting steps in this link and check will it solve the problem.

  Step by step wireless connection

  https://support.Xbox.com/support/en/us/NXE/xboxlive/getconnected/hcxl/sbswirelesscon.aspx

  You can also check the following links for Xbox live support and try the steps provided:

  http://support.Xbox.com/support/en/us/Xbox360/xboxlive/troubleshooting/networkhelp_wireless.aspx

  http://support.Xbox.com/support/en/us/Xbox360/xboxlive/troubleshooting/gettingconnectederrors.aspx

  If you still need help, you could get in Xbox for more support.

  You can see the following link for Xbox support:

  http://www.Xbox.com/en-us/community/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.