Help - p7-1020 card connection usb mother removed - how to connect properly?

Similar Questions

• Trident video capture card connected via USB 2 not working not properly under XP

  I use a Trident card connected via USB 2.0 video capture and I had a weird behavior:

  -sometimes not detected (not included in the list of devices)

  -sometimes not recognized (unknown device)

  -sometimes not start (Code 10)

  -sometimes works very well

  I used a USB Tracker to study the issue and found out that the usbehci driver is not able to activate the USB port.

  The message sequence is as follows (when it works):

  Get the status of the Port (4) - success

  Serial Port (4) feature, Reset - success

  Get the status of the Port (4) - success

  | - Port is enabled

  This is when it does not work:

  Get the status of the Port (4) - success

  Serial Port (4) feature, Reset - success

  Get the status of the Port (4) - success

  | - Port is NOT enabled

  Function Clear (4) Port, connect to state change - success

  Get the status of the Port (4) - success

  Serial Port (4) feature, reset the change - success

  I have more tracks, but I don't know if this is the right place to post.

  Thank you in advance to anyone willing to help me.

  Sincerely

  Andrea

  * original title - device USB not recognized or not started or sometimes work *.

  This link might be useful for:

  Advanced troubleshooting tips for General USB for Windows XP problems

• data card connection problem

  use a 1020-21 model adsl modem I want to connect with the data card to the adsl modem how to connect & how to use the data card internet only reliance I use pls give providers of wide band good solution not available in my region pls how I connect to the data card into the usb port on the modem available also in modem

  Hello

  Since this forum is supported only for the Windows operating systems, so I suggest to consult with manual or contact the manufacturer of the modem and check if it helps.

• Need help solving any internet connection. This happened to me several months ago and the supplier

  Need help solving any internet connection. This just started today, but it's happened to me several months ago and at that time the provider thought it was software related and suggested that I have to contact HP. I have a HP 2006 m7674n, Windows XP. For several days, I worked with HardBeatZ on a different issue that has been resolved today. However, for several days, I had been working msconfig to track down the cause of the problem; This resulted in several reboots the computer - this would have something to do with it? Also, I just started getting a RUNAS box popping up. HardBeatZ has provided a link to a possible solution to this, but since I can't do internet connection I can't get the fix. Right now I'm on a laptop with Wi - Fi for the same service internet/modem as my PC. I changed nothing onmy PC in the last days of several for the internet connection or services.  I always use eithernet connection from the router to the computer. I tried Wi - Fi today with my PC but not connect. I tried to unplug the router and reconnect but it does not solve the problem. I did a Network Diagnostic and printed the report; Here are the warnings and error messages in this report:

  1. under the terms of the bridge diagnosis; Warning: "www.microsoft.comcould hostname not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: ' 12007 connection error at www.microsoft.com: the server name or address cannot be resolved. " and the error was unable to establish a connection.

  Still under network adapter diagnosis; It shows the connection status of network as "connected."

  Also, I have an older computer that I connected with eithernet and was able to connect to the internet but has been disconnected because the version of Windows is too old to support the connection. But I could briefly connecting on HP website before you log out. The point being I think it's a computer problem and not an internet router or provider problem.

  I read a few entries on this site and it seemed that the recovery of the system was the only solution. I hope that there are other things to try before I resort to that.

  I would appreciate any advice on the steps to diagnose the problem and insight as to what may have caused this to happen. Thank you. dt2012

  Sorry... still with you... OK, we know that your network card is good and we know that your first post;

  1. under the terms of the bridge diagnosis; Warning: 'host www.microsoft.com name could not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: "error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved." and the error was unable to establish a connection.

  4. still under network adapter diagnosis; It shows the connection status of network as "connected."

  For me, it seems that Internet Explorer is corrupted or damaged. Your computer is shipped with Microsoft Windows XP Service Pack 2 Media Center Edition 2005 but since you can have updated to XP SP3 or upgraded to a newer version of Internet Explorer. Please try the options listed in this document to Microsoft titled "how to reinstall or repair Internet Explorer" , since there are several options depending on your system configuration, please post if you need help to solve your problem.

• When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. What is the full error message do you get?

  2. are - that you be able to access or connect to the Internet via wired?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1:
  Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2: If the problem persists, try to follow the steps from the link.

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Please follow these recommended steps and post if you still experience the problem.

• Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Hi, Rlayhee,

  Printer brand/model?

  Start > Control Panel

  Select the Printers folder

  Right-click on the printer icon, then select open

  Are there pending print jobs

  If Yes, click on file > cancel all Documents

  Close the print queue and the printer folder

  Try printing again

  Start > right click on computer

  Select manage

  Select Device Manager

  Click on the + sign next to the Ieee... compatible printer (if any)

  Right-click on the driver and select uninstall

  Click on the + next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the driver and select uninstall

  Close the Device Manager

  Restart the computer to Windows to reinstall the drivers

  Go to the manufacturer's website and search for driver updates

  Try printing again

• NWZ-B172F cannot open, when it connected to the PC, it shows Mr. USB VERBINDEN. How to solve it?

  NWZ-B172F cannot open, when it connected to the PC, it shows Mr. USB VERBINDEN. How to solve it?

  Hi sean2sun,

  It seems that the player is not correctly recognized.

  What is the operating system installed on your computer?

  However, try to disconnect and reconnect the Walkman on computer. You can also try plugging it into different USB port of computer.

  NOTE: Connection to the USB hub is not supported. Walkman should be connected directly to the USB port on the computer.

  If the problem persists, perform the steps on the below technical support article:

  https://La.en.KB.Sony.com/app/answers/detail/A_ID/42398/p/57784, 59687,59899, 71847/c/65,75/kw/Walkman...

  If my post answered your question, please mark it as "acceptable Solution".

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Card connection and Camcorder FireWire PCMCIA - Equium L20-197

  Tried to add 2 different cards using 1394 firewire cardbus. Each card has been recognized and reported as working properly. Every time when I tried to connect to a Sony DVcam, the software reported there is no connected camera.

  I know that the camera, cables & software are OK - tested with another Toshiba laptop with a built in 1394 port.
  I did something wrong? Does anyone have an experience with a card, they know works in this model?

  Hello

  Sorry, but if the card is correctly recognized that there must be a problem between the card and cam. Try to contact the card manufacturer support. They have more experience with own products.

• No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Original title: no local network connection

  No links to the local area network connection. But how to use the Internet again, please help establish a LAN connection.

  Hi H.mustafaakyurek,

  ·         What operating system is installed on your computer?

  You can view the following items on the creation of a network connection:

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

   

  Start here to set up a home network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Also see the following articles on the connection of an Internet connection:

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  Allows to connect to the Internet mobile broadband

  http://Windows.Microsoft.com/en-us/Windows7/use-mobile-broadband-to-connect-to-the-Internet

  Hope this information helps.

• Help, windows 7 upgrade advisor requires the removal of the player engine.

  Help, windows 7 upgrade advisor requires the removal of the player engine. I removed the Rhapsody, but it is still asking deletion. NOTHING I can find in my computer associated to Real Player. So please don't tell me no "Uninstall" that there is no evidence in the Uninstall list. Unless it is somewhere else. So, how can I continue my effort to upgrade to Windows 7? I tried twice already and he goes all the way to the end and then says installation failed and he returned to Vista. I have Vista Home Premium.

  Hello

  I suggest you to follow a few troubleshooting steps to solve the problem on your computer.

  Method:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-in/Windows-Vista/delete-files-using-disk-cleanup

  If it still asks the suppression of Rhapsody then I suggest you to contact forums Real player for further assistance.

  Hope this information helps you.

• I need help for my reader to USB drive on my windows 10 ACER?

  I need help for my reader to USB stick on my chrome windows 10 plug ins acer. Can you help me?

  What Adobe application that you use?

  This is the Adobe Media Encoder forum, and you did not mention anything on this subject. If you can let us know what Adobe application, you need help, we can help you make the right forum.

  Thank you

  Regalo

• Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  If lr crashes repeatedly, reset preferences.   http://www.lightroomforums.NET/showthread.php?14226-resetting-%28or-trashing-%29-the-light file-Preferences-room

• (! "I need help!) Graphics card that is right for my needs? (I need help!)

  I am planing to upgrade my graphics card Intel HD 4600 to a good graphics card for Adobe Premiere, Adobe After Effects and some games like GTA V. currently, these PC specifications: Intel Core i7 processor 4790 3.6 GHz, 16 GB of Ram (1600 MHz), 2 x 1 TB WD red HDD (I am planing to get later a 512 GB SSD)

  My needs:

  A good graphics card with which I was able to get a video edithing '4K' Workflow at 60 Hz

  He should ' t cost more than 400 $

  It must be great for Adobe After Effects and Adobe Premiere.

  It must be also very high for some games like GTA V Ultra mid-week.

  Please help me graphics card wich I should get, if you have an idea, that would be great for me, so please help me.

  For 4 k you will need a video card with at least 4 GB of ram.  In your price range, take a look at the video card GTX 770.  It should work as well with your games.

  David

• NB100 no usb not power - how to reset

  The NB 100 has 2 usb ports on the right side. I tried plugging in an external cd drive and got a box with red indicator of the background task bar indicating something on the device of drawing too much power and that the supply would be stopped.
  Since then the usb ports 'appear' dead. Nothing I plug is recognized by the NB100.

  It is said in the user's manual if it is found an overload of the power to the usb ports can be stopped. However, it does not say how to reset ports IE power to 'em.

  The card reader and the usb port on the left front work yet.

  I tried the update of the BIOS to the latest 2.10, affecting all the parameters of the default bios with F2 at startup and even bought "Device Driver" to make sure that all drivers are up-to-date.

  Can anyone help? I don't know there is a simple answer but just don't see it.

  Ideally, I would like to avoid having to reinstall XP because I do not have the disk and the hard disk does not appear to have a XP partition.

  Help!

  Hello

  In your case, I recommend to remove the /hub of /controller of the USB port on the Device Manager.
  Simply go to the Device Manager, expand the area of USB controller and remove all the devices that are available in this area.

  After restarting again, the system (Win XP in your case) should recognize the USB ports and the driver must be installed again.
  Then restart once again connect a USB device and check if it can help

  Just for info: USB 2.0 ports provide 500mA so in some cases the external USB device would not detected when this device would need more than the usual 500mA. In this case this device must be connected to two USB ports using a USB Y cable or use an external power supply, as do some USB hubs.