HELP PLEASE!  Cache for the Lightroom Preview error

Similar Questions

• Im trying to download the creative cloud on my Mac but its gives me the error "Installation on case-sensitive volumes is not supported. Please choose a different volume for the installation. (Error code: 22) "can you help me with this please?

  Im trying to download the creative cloud on my Mac but its gives me the error "Installation on case-sensitive volumes is not supported. Please choose a different volume for the installation. (Error code: 22) "can you help me with this please?

  Try error "Unsupported of disks case-sensitive" or similar install error | Mac OS

• Start stuck on "Please wait for the Local Session Manager."

  I would say that this problem started a couple of days. Went to start my laptop (Toshiba) and he sat on the "Please wait" message forever.

  Had no problems to start in safe mode. Looked up various ways of addressing the problem.

  Was able to change the resume date and back a few weeks ago. Still no luck. Happened to read something on a printer Epson being perhaps the problem driver (it was installed a day before the date of restoration chosen). Uninstalled the drivers, computer still does not start.

  Tried restarting running. I do not have the CD it came with Vista, but it was an option when you hold F8 during startup (I think?) Couldn't find any problems.

  Ran check on memory. No problem either.

  Changed settings for a verbose startup and ran a Diagnostic startup - all good for this. Then tried selective startup load system services... This is when the error occurs. When starting, it hangs on "Please wait for the Local Session Manager" and does nothing more.

  I looked in the event viewer to see what came that time and a couple mistakes were:

  Event ID 6000: winlogon notification subscriber was unavailable to handle a notification event.

  Event ID 7026: the next (s) start or start failed to load system
  spldr
  Wanarpv6

  It would be very useful for me not having to run my computer in safe mode automatically all the time, although it is useful that I at least have that option. Any help is greatly appreciated.

  Hello

  1. by chance your computer is connected to a domain environment?

  2. as you mentioned in your article that you tried the selective startup, I want to confirm if you have disabled the services left 3rd after hide Microsoft services?

  If you did not disable these services make sure you disable and then check if it works.
  See the article below for more information.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Please wait for the customer to political group - stop questions

  Hello

  I have problems with the closing of a machine. When the machine is connected to the corporate network, everything works fine. However, if the computer is connected to the VPN (1 hour or more) it is always suspended when it stops. First step in the shutdown process is:

  Please wait for the system event Notification service.

  This change after 3 minutes exactly. Next step:

  Please wait for Group Policy client windows 7

  is never exceeded (even after a few hours). Machine never off.

  Under newspapers there are always these 4 events when the machine stops in vain:

  1. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).
  2. 4627: the event COM + a system expired attempt to fire the method of logging on the event {D5978650-5B9F-11D1-8DD2-00AA004ABD5E} class for the Publisher and the Subscriber.  The Subscriber has not responded within 180 seconds. The full name of the subscription is "ISensLogon2". The HRESULT is 80010002
  3. 6006: the winlogon notification subscriber took 180 second (s) to handle the notification event (Logoff).
  4. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).

  Sense has expired after 3 minutes while there is no event 6006 for GPClient and machine is stuck there for centuries (Please wait for the customer to group policy). I noticed in the system logs that before the machine hangs during the shutdown process there are these errors and warnings:

  • 5783: the session configuration for the Windows NT or Windows 2000 Domain Controller \\server for the domain X is not admissible.  The current CPP of Netlogon call on \\machine to \\server was canceled.
  • 1014: name resolution for the name of the server has expired after none of the configured DNS servers answered.
  • 131: NtpClient could not set a domain peer to use as a source of time due to the DNS resolution error on ". NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: the requested name is valid, but no data of the requested type was found. (0x80072AFC).

  There is more than 1014 events for different servers and some 131. 5783 is always alone.

  I did a group policy log, because I thought that I will be able to see where the machine stuck. Below you can see the part of the newspaper GPSVC when the machine stops in vain:

  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe58
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (438.1a04) 21:31:24:327 waiting for user group wire political end.
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe10
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (218.C88) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xdcc
  GPSVC (218.1054) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0x20cc
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xd90
  GPSVC (218.1054) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.D48) 21:31:24:342 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.D48) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1c04) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.1c04) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 2100
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 1264
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0

  I excluded 1 GP machine and left on the VPN for a few hours, several times. He always stopped correctly.

  However I tried with the VPN disconnection before turning off the machine, I even turned off WiFi but machine still hanging. If I tried to get GP results it takes ages before stopping the machine and he's stuck in the step "to get the user name. Gpupdate/force will never update policy (it stops at policy update...). I tired with the installation of different patches that has not solved the problem.

  I think that there is that DNS issues while the machine is on VPN which led the GP cannot be applied. When the machine tries to close it is always somehow connected. There is no problem with the connection, no GP application script when the user disconnects, not roaming profiles.

  Does anyone have the same problems? All machines are Dell with Juniper NC (VPN).

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet forum: For Windows 7 

  Hope this information helps.

• remote desktop hang at 'Please wait for the system event notification' during logoff

  When I disconnect a remote connection, sometimes the GET logoff screen stuck at "Please wait for the system event notification" next time I try to open a session.
  This can also happen if that I disconnect the user, but the user seems to weigh on this same screen as well.

  There is a particular difficulty for this?  I can connect as long as administrator to another account, I can't kill connection attached somehow to be registered in the next time?

  Thank you

  Hello

  I suggest you to take a look at the answer in this thread and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Sens-could-not-connect-to-the-system-event/4e5a04e9-88f8-4017-9416-2ca67c5ce7c5

  Hope this helps,

• HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

  HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

  Hello caromuna,

  It seems that other users have found a way to completely reset the printer back to the default settings, which can help with this question.

  The reset is discussed in this forum thread and seems to be a bit difficult to fill. Let me know if it helps to solve your problem.

  Photosmart 3310 ink system failure

• I have the plan of photography with photoshop and Lightroom 5. I tried to open a catalog I had created it said the photographs were again for the Lightroom I. I have a Mac and downloaded Didier, thinking I would get a new update of lightroom.

  I have the plan of photography with photoshop and Lightroom 5. I tried to open a catalog I had created it said the photographs were again for the Lightroom I. I have a Mac and downloaded Didier, thinking I would get a new update of lightroom. It did not. Should I expect Lightroom cc and extra cost that would be for me?

  Please open the app creative cloud on your computer and the gpo tot app tab. If you are not able to see the Lightroom CC listed, sign out and sign in the creative cloud.

  Here is the screenshot for how you can download the application from the creative cloud

  

  Thank you

• Storage VMotion - a general error occurred: could not wait for the data.  Error bad0007.

  People,

  I searched through this forum and have not found an answer that works in many positions out there, I say to myself that I would ask him once again.

  Here's the context:

  We have 12 identical Dell M600 blades in 2 chassis with 16 GB of Ram, 2 x Xeon E5430, they are all connected to an Equallogic PS 5000XV iSCSI SAN on a separate iSCSI (vswitch1) with 2 cards network dedicated network and dedicated switch, console svc iscsi dedicated, dedicated VMkernel port for iscsi access. Net access (vswitch0) contains port groups VM for our various networks and a console port and vmkernel svc for VMotion with 2 separate NETWORK cards as well.

  We are running ESX 3.5 U3 and VCenter 2.5 U3 on Win2k3 R2

  VMotion works between all servers, Storage Vmotion works for most machines, HA works and the value 2 host failurs with no monitoring of vm, DRS is set to manual for now I have a few machines on the local stores that I complete my rebuilt LUN, there is no set of rules for DRS and VMware EVC is enabled for guests of the Intel. However, I'll just describe one machine to do svmotion below.

  Here's the problem:

  I'm trying to Svmotion via svmotion.pl - interactive, a Machine to Windows 2000 with a virtual disk and a virtual RDM. I am aware of the requirements for the RDM and required parameters for svmotion, independent is not selected for the RDM, and I also have svmotioned several machines linux and win2k3 with the same configuration without problem. In the interactive session, I choose to individually place the disks and I chose the virtual disk to only the virtual machine to be moved, essentially, as I saw it move vdisk virtual machine and then copy to the pointer of the RDM.

  The use of the processor in this machine is about 25% average. but I try to run migrations at the time the lowest. and The Host it itself shows only about 5.5 GB of the 16 GB of RAM used. so I think we're good on the RAM. the volume/datastore that I'm migrating from has 485 GB free and the volume/datastore I migration towards a 145 GB free. the VM virtual disk is only about 33 GB.

  I run the script the windows version of the RCLI svmotion. and when to begin the process, I get the following error at around 2 percent of the progress:

  "Since the server has encountered an error: a general error occurred: could not wait for the data."  Error bad0007. Invalid parameter. »

  After searching around, I found the following hotfixes to the U2 release notes

  • Migrate.PageInTimeoutResetOnProgress: Set the value to 1.

  • Migrate.PageInProgress: The value 30, if you get an error even after the setting of the Migrate.PageInTimeoutResetOnProgress variable.

  I've made these changes, and I still get the same error.

  When I dig in the newspaper, I see these entries in the journal of vmkwarning:

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1397: migHeap0 already at its maximumSize bunch. Cannot extend.

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1522: Heap_Align (migHeap0, 1030120338/1030120338 bytes, 4 align) failed.  calling: 0x988f61

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: migrate: 1243: 1235452646235015: failure: out of memory (0xbad0014) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: MigrateNet: 309: 1235452646235015: 5 - 0xa023818: sent only 4096 bytes of data in message 0: Broken pipe

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu6:1396) WARNING: migrate: 1243: 1235452646235015: failed: Migration protocol error (0xbad003e) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: migrate: 6776: 1235452646235015: could not send data for 56486: Broken pipe

  At this point, I'm stuck... What is Windows RCLI? the vcenter Server? or the service console with not enough of RAM? We have already increased all our consoles service 512 MB...

  Any help would be greatly appreciated...

  Thanks in advance.

  Alvin

  The vmkernel on out of memory error, I had that before. And vmware support recommends setting 800M Max service console memory. And I did it and have no problems after that.

  See if that helps the issue.

  Mike

• Not able to start agent cache for the requested data store

  Hello
  
  This is my first attempt in TimesTen. I am running TimesTen on the same host Linux (RHES 5.2) running Oracle 11 g R2. TimesTen version is:
  
  TimesTen Release 11.2.1.4.0
  
  
  Trying to create a simple cache.
  
  The DSN entry section for ttdemo1 to. odbc.ini is as follows:
  
  + [ttdemo1] +.
  Driver=/home/Oracle/TimesTen/TimesTen/lib/libtten.so
  Data store = / work/oracle/TimesTen_store/ttdemo1
  PermSize = 128
  TempSize = 128
  UID = hr
  OracleId = MYDB
  DatabaseCharacterSet = WE8MSWIN1252
  ConnectionCharacterSet = WE8MSWIN1252
  
  With the help of ttisql I connect
  
  Command > Connect "dsn = ttdemo1; pwd = oracle; oraclepwd = oracle;
  Successful login: DSN = ttdemo1; UID = hr; DataStore = / work/oracle/TimesTen_store/ttdemo1; DatabaseCharacterSet = WE8MSWIN1252; ConnectionCharacterSet=WE8MSWIN1252;DRIVER=/home/oracle/TimesTen/timesten/lib/libtten.so;OracleId=MYDB; PermSize = 128; TempSize = 128; TypeMode = 0; OracleNetServiceName = MYDB;
  (Default AutoCommit = 1).
  Command > call ttcacheuidpwdset ('ttsys', 'oracle');
  Command > call ttcachestart;
  * 10024: could not start agent cache for the requested data store. Could not initialize Handle.* Oracle environment
  The command failed.
  
  The following text appears in the tterrors.log:
  
  15:41:21.82 Err: ORA: 9143: ora-9143 - 1252549744-xxagent03356: database: TTDEMO1 OCIEnvCreate failed. Return - 1 code
  15:41:21.82 Err: 7140: oraagent says it failed to start: could not initialize manage Oracle environment.
  15:41:22.36 Err: 7140: TT14004: failed to create the demon TimesTen: couldn't reproduce oraagent for "/ work/oracle/TimesTen_store/ttdemo1 ': has not been initialized Handl Oracle environment
  
  What are the reasons that the demon cannot happen again to another agent? FYI, the environment variables are defined as:
  
  ORA_NLS33=/U01/app/Oracle/product/11.2.0/Db_1/ocommon/NLS/Admin/data
  ANT_HOME = / home/oracle/TimesTen/ttdemo1/3rdparty/ant
  CLASSPATH=/home/oracle/TimesTen/ttdemo1/lib/ttjdbc5.jar:/home/oracle/TimesTen/ttdemo1/lib/orai18n.jar:/home/oracle/TimesTen/ttdemo1/lib/timestenjmsxla.jar:/home/oracle/TimesTen/ttdemo1/3rdparty/jms1.1/lib/jms.jar:.
  Oracle@rhes5:/Home/Oracle/TimesTen/ttdemo1/info% echo $LD_LIBRARY_PATH
  /home/oracle/TimesTen/ttdemo1/lib:/home/oracle/TimesTen/ttdemo1/ttoracle_home/instantclient_11_1:/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/network/lib:/lib:/usr/lib:/usr/ucblib:/usr/local/lib
  
  
  See you soon

  I see no problem here. The ENOENTs are superfluous because it locates libtten here:

  23302 open ("/ home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib/libtten.so", O_RDONLY) = 3

  without doubt, it does the same thing trying to find the libttco.so?

  23302 open ("/ home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1/libttco.so", O_RDONLY) =-1 ENOENT (no such file or directory)

  Thank you for taking the trace. I really want to have a look at the complete file if you can send it to me?

• Insert the module {cc_security} and captcha and continues to receive spam on forms Adobe Catalyst submissions. Help, please! Also the required field is be circumvented.

  Insert the module {cc_security} and captcha and continues to receive spam on forms Adobe Catalyst submissions. Help, please! Also the required field is be circumvented.

  This has been resolved through Adobe Live Chat Support. Thank you

• Help, please! Upgrade Windows 7 0x7E error code and THE. DLL not found.

  I'm trying to upgrade Windows Vista to Windows 7 Home Premium.

  I did everything what I have to do before the upgrade, but when I tried to install it, I got are two following error messages:

  This application has failed to start because of THE. DLL was not found.
  Reinstalling the application may fix this problem.

  Windows could not load the required file WinSetup.dll. The file can be
  corrupt. To install Windows, restart the installation. Error code: 0x7E

  I searched the internet for solutions, but I have found none.
  Could someone please help?

  God, if only I knew I'd meet installation problems, I would probably rather stay with Vista and save my money $130.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Check your hard drive for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  You might want to think about doing a custom clean install:
  For more information, see the article below:
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom

  But you must ensure that your personal and settings files are supported using Windows Easy Transfer:
  Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

• When I try to update I get a U44M1I210, "Unable to extract the downloaded files" error message - help please, apply to the latest Indesign, Illustrator and Photoshop CC

  When I try to do a CC update I get an error message U44M1I210, "failed update - impossible to extract the downloaded files. Try to press to redownload again. (U44M1I210) ' - help please - re-don't download makes no difference, applies to the latest Indesign, Illustrator and Photoshop CC, others seem to be updated without problems. I can see the disk image files in the AAMUpdater folder, but they will not open and come up with message ' could not be opened - busy resource.

  Another thing that makes everything work ultimately (after I finally properly installed all Apps CC etc - I couldn't get the Apps to save my preferences for each of them and Indesign would not open yet).

  Make yourself as a user in the users and groups on "Admin", is added and with privileges "read and write" and "Apply to the clos etc.", when you 'get Info' on the hard drive if you can access/modify all the files and folders on the hard drive.

• Names of specific driver for the blue screen error Codes

  Hi all! Need your help please! Like so many others, I received Error Codes blue screen, that crash my system. I need to know the names of the specific drivers associated with these codes so that I can disable them (in accordance with the instructions of Windows), internet research has not helped. If anyone knows what are the names of the associated drivers or how to determine them it would be greatly appreciated! The error codes are:

  0x0000007E; 0XC0000005; 0X82D1F1C4; 0XF89EFB04; 0XF89EF800

  Thank you!

  Hi Anna K.

  When you encounter a Blue Screen of Death (BSoD) in Windows, the computer saves information about the error message in a log file. This log file or minidump file is saved in the subdirectory of Windows Minidump (C:\Windows\MiniDump). Generally the information stored in the minidump file can help identify the cause of the blue screen error message and help you solve the problem.

  For more information on the reading of the memory dump files, see the following article:

  How read partial memory dump files that Windows creates for debugging

  See also:

  How to troubleshoot a Stop error 0x0000007E in Windows XP

  Note The article above applies to Windows XP. However, you can follow the steps to solve the problem.

  If you don't have any service pack (SP) installed, please consult you may receive an error message "Stop 0x0000007E" after you enable the BitLocker Drive Encryption feature in Windows Vista

  In addition, you can also download the minidump files so here experts can analyze the cause of the error on a blue screen.

  See use SkyDrive download collected files and post screen shot/image

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Need help bridge database for MS SQL Server, error ORA-28546 configuration problems

  Dear all,

  I'm trying to configure Oracle to MS SQL Server(I don't have admin access to the MS SQL Server) database gateway.  When I try to test the dblink connection, I get the following error.

  I published select * from dual@xyz;

  ORA-28546: initialization of the connection failed, probable Net8 admin error

  ORA-28511: interruption of the RPC connection to heterogeneous remote agent using SID = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1521)) (CONNECT_DATA = (SID = dg4msql)))

  ORA-02063: preceding 2 lines of xyz

  28546 0000 - ' failed to initialize connection, unlikely Net8 admin error.

  My setup is as follows.

  1 oracle 11 GR 2 under Oracle Linux 6, the same gateway version is installed on the same server but different base directory.

  2 oracle DB base directory is u01/app/oracle/product/11.2.0/dbhome_1, gateway home directory is/u01/gateway.

  3. I use the same file listener.ora for db and the entry door.

  4. the content of my listener.ora, tnsnames.ora and the initdg4msql.ora is below.

  /U01/app/Oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  #(ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1522))

  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = db.abc.com.tw))

  )

  )

  MSSQL =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  )

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = db.abc.com.tw)

  (ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = orcl)

  )

  )

  SID_LIST_mssql =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = dg4msql)

  (ENVS = LD_LIBRARY_PATH = / u01/gateway/dg4msql/pilot/lib: / u01/gateway/lib)

  (Program name = / u01/gateway/bin/dg4msql)

  )

  )

  /U01/app/Oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  LISTENER_ORCL =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = db.abc.com.tw))

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = db.abc.com.tw))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcl.abc.com.tw)

  )

  )

  dg4msql =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = localhost)(PORT = 1521))

  (CONNECT_DATA = (SID = dg4msql))

  (HS = OK)

  )

  /U01/gateway/dg4msql/Admin/initdg4msql.ora

  HS_FDS_CONNECT_INFO=[192.168.0.1]:1433//XIETEST

  # replacement connect format is the name of host/serverinstance/databasename

  HS_FDS_TRACE_LEVEL = 255

  HS_FDS_RECOVERY_ACCOUNT = RECOVERY

  HS_FDS_RECOVERY_PWD = RECOVERY

  the dblink is created with the following statement.

  CREATE DATABASE LINK "xyz.abc.COM.TW".

  CONNECT TO ITS IDENTIFIED BY

  With the HELP of "dg4msql";

  Couple of other things I did to check the above works.

  [oracle@db admin] $ ping 192.168.0.1

  PING 192.168.0.1 (192.168.0.1) 56 (84) bytes of data.

  64 bytes from 192.168.0.1: icmp_seq = 1 ttl = 61 time = 7.61 ms

  64 bytes from 192.168.0.1: icmp_seq = 2 ttl = 61 time = 7,41 ms

  ^ C

  -ping 192.168.0.1 - statistics

  2 packets transmitted, 2 received, 0% packet loss, time 1818ms

  RTT min/avg/max/leg = 7.417/7.516/7.615/0.099 ms

  [oracle@db admin] $ tnsping dg4msql

  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 2013-SEPT-11 10:53:11

  Copyright (c) 1997, 2009, Oracle.  All rights reserved.

  Use settings files:

  /U01/app/Oracle/product/11.2.0/dbhome_1/network/admin/SQLNET.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = localhost)(PORT = 1521)) (CONNECT_DATA = (SID = dg4msql)) (HS = OK))

  OK (0 msec)

  [oracle@db admin] $ lsnrctl status mssql

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 2013-SEPT-11 10:54:23

  Copyright (c) 1991, 2009, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias mssql

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  11-SEP-2013 start date 10:09:46

  Uptime 0 days 0 h 44 min 37 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/DB/MSSQL/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=127.0.0.1) (PORT = 1521)))

  Summary of services...

  Service 'dg4msql' has 1 instance (s).

  Instance of 'dg4msql', status UNKNOWN, has 1 operation for this service...

  The command completed successfully

  Obviously, I'd like to get this configuration to work, but I have also a couple other questions about this configuration.

  1. for the installation of the bridge, he wants to run the root.sh script.  the script root.sh as to what follows.

  Enter the full path of the local bin directory: [/ usr/local/bin]:

  The 'dbhome' file already exists in the usr.  Overwrite it? (y/n)

  [n]: n

  The 'oraenv' file already exists in the usr.  Overwrite it? (y/n)

  [n]: n

  The 'coraenv' file already exists in the usr.  Overwrite it? (y/n)

  [n]: n

  the above answer is correct?

  Thanks for reading.

  The strace shows:

  2796 open ("/ u01/app/oracle/diag/tnslsnr/db/mssql/trace/mssql.log", O_WRONLY |) O_CREAT | O_APPEND, 0660) = 12

  9564 access ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/admin/initdg4msql.ora", F_OK)

  2796 write (12, "2013-SEPT-11 15:02:44 * (CONNECT_"..., 175 ")")

  9564 <... access="" resumed="">) =-1 ENOENT (no such file or directory)

  2796 <... write="" resumed="">) = 175

  2796 close (12

  9564 brk (0x14a3000) = 0x14a3000

  2796 <... close="" resumed="">) = 0

  2796 poll ([{fd = 8, events = POLLIN |}]) POLLRDNORM}, {fd = 11, events = POLLIN |} [POLLRDNORM}, {fd-=-1}, {fd = - 1}]-1, 4

  9564 access ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/dg4msql_agt_9564.trc", F_OK) =-1 ENOENT (no such file or directory)

  9564 access ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/dg4msql_agt_9564.trc", F_OK) =-1 ENOENT (no such file or directory)

  9564 statfs ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/", 0x7fff91f005b8) =-1 ENOENT (no such file or directory)

  9564 open ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/dg4msql_agt_9564.trc", O_WRONLY |) O_CREAT | O_TRUNC, 0666) =-1 ENOENT (no such file or directory)

  => so that it always uses the database as Oracle_home House

  With this info, I rechecked the listener and saw that you are missing the ORACLE_HOME setting in the dg4msql section of SID. Please correct your entry to mssql_sid to:

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = db.abc.com.tw)

  (ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = orcl)

  )

  )

  SID_LIST_mssql =

  (SID_LIST =

  (SID_DESC =

  (ORACLE_HOME = / u01/bridge)

  (SID_NAME = dg4msql)

  (ENVS = LD_LIBRARY_PATH = / u01/gateway/dg4msql/pilot/lib: / u01/gateway/lib)

  (Program name = / u01/gateway/bin/dg4msql)

  )

  )

  Then please stop and restart the mssql listener and check again.

  -Klaus

• Tecra A9 - software for the fingerprint sensor error

  My laptop is less than 3 weeks old and the fingerprint sensor has stopped working.
  I just get an error message: can not find the fingerprint sensor device, 0xe7210005 error code.
  can anyone help?

  Hello

  you don't have many options. But I can try to give you some tips:

  1. go into the Device Manager and search for the device of fingerprints, so if it s present, uninstall it and after a reboot it should reinstall itself.

  2. go on Toshiba drivers download site and download the latest drivers for this device. Install the driver and check if it work s

  3. If really nothing done then you should recover your machine with the media shipped (or HARD drive recovery)

  4. the last resort, if all fails, is to contact the nearest [ASP | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] in your country and ask them a hardware health check and repair.

  Good luck

  Greetings