Help! Problem with DVD

Similar Questions

• Problem with DVD - ROM SD-C2402 (DVD multisession)

  Hello

  I have the following problem: I recorded a DVD in different stages (multisession) with Nero 6, but I can read only the first session on my laptop (Windows 98SE). On the other hand, I have no problem with multisessions CD

  Could you help me in this case?

  Thank you

  John

  Hello

  I m not 100% sure, but I think that it s a problem with the burning software and/or the media. I found information there are many problems with playback of the files after burning the multisession DVD-R, + R (Win98SE). In my opinion, you should try to burn DVDs on media RW multisession.

  Good bye

• problem with dvd Panasonic Matshita UJ862A

  I have a Matshita Panasonic UJ862A DVD +/-RW and when I use it to burn the ISO image I get the following:

  ========

  Sense: 02 ASC: ASCQ 04:08 (00 command)
  -------------------------------------------------------
  PX.dll: 4.8.39.500
  PxAFS.dll: 4.8.39.500
  pxdrv.dll: 1.2.39.0
  PxMas.dll: 4.8.39.500
  PxSFS.dll: 4.8.39.500
  PxWave.dll: 4.8.39.500
  pxwma.dll: 1.0.0.3

  ========

  Is this a problem with windows (Vista SP2 32 bit)?

  I use Roxio Creator Version 9 to burn the ISO.

  Hello

  -Respect the limit with the specific ISO image?
  -Do you have problems with burning other ISO images?
  -Do you have any third-party burning software
  -Did you do changes on the computer before this problem?
  -You are able to burn the ISO image to a DVD disc using other burning software? If so, then the problem is with Roxio.
   
  So, I suggest you to contact Roxio support for assistance.
  http://Corel.force.com/Roxio?lang=en
  For reference:
  http://forums.support.Roxio.com/
   
  Hope this information helps.

• HP Envy 17 j 000 EB: problems with DVD player

  Dear Sir

  I am not able to play a DVD with my HP Envy 17 000 EB j.
  My laptop said that there is a problem with the driver.
  I took several steps explained on the web, but it did not help.
  Is it possible to reinstall the driver...?

  Thank you!
  Dieter

  Hi Dieter,

  Try the following.

  First of all, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When reinstalling, restart the laptop.

  Allow windows fully recharge, and then download and reinstall the driver of gpu from Intel on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63750.exe

  Once again, when reinstalling, restart the laptop.

  Kind regards

  DP - K

• A very strange problem with DVD player (some DVD play not)

  Hello everyone.

  I bought a laptop Dell Inspiron 3543 2 months ago. Overall, I am very satisfied with this product, but I have a problem with the DVD player. When I insert some DVD discs, the driver reads some DVDs but not others. After trying to play DVDs, I see that the DVD player play about half of the DVD I'm looking for. Although I can guarantee, I didn't send my laptop to the service because I can't work even a day without my cell phone. So, in order to solve the problem, I bought a DVD player new, original Dell (the same model of dvd player, which is Panasonic Matshita DVD +-RW UJ8E2). Today I started using my new DVD player, but it also has the same problem as my old DVD drive or it also does not play some DVD.

  To make the issue even more strange, here are some details:

  -My dvd drives have no problem and I have tried many original DVDs (especially the original films). And all the dvd disks that do not play on my computer play on other computers with no problems. There is no problem with the disks.

  -Certainly no problem with the "DVD region Code". I use original DVDs with region code 2, which is the area code for my country.

  -All my drivers, the operating system and the dvd drive drivers are up to date. When I look at my DVD drive properties, it is written that "the dvd drive works properly.

  -When I insert a DVD disc, if my DVD player he plays, he plays each time. But if my dvd player does not play a dvd, and then he never plays it. So, there is a consistency in the dvd disc set to play or not. When a DVD disc does not play, my DVD player rolls the drive some time and then the DVD done pretending as if there is no disc in the drive.

  -Both my old and newly purchased DVD drives have exactly the same problem, so I think that there's no problem like a lens dirty. I also think that there is no mechanical problem with one of my DVD drives because my newly purchased, original DVD player also has the same problem.

  I thank everyone for any help or advice in advance.

  Today, I received my dvd player third, new, Chinese, not original from a seller of spare part. He plays all DVDs with no problems. :)

  If in the future someone always has the same problem as me and read this Web page to find a solution, you know where is the problem.

• Problem with DVD player and get the error code 19 Device Manager

  Original title: TSSTcorp CDDVDW SH - 224DB ATA device

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  How to fix it please Message Please please how to fix it

  Hi Emerald,

  Please contact Microsoft Community. I understand that you have a problem with the CD\DVD drive and get the error code 19 Device Manager. I've surely you will help solve this problem.

  To better understand the issue, I would like to know if you have any recent software or hardware on the computer changes before this problem?

  This problem might have occurred because of these reasons:

  1. Install or uninstall the CD or DVD recording programs.
  2. Uninstall Microsoft Digital Image.

  Try the steps listed here and see if it helps:

  I suggest you try the procedure described in article which will correct corrupted registry entries. Check if it helps.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060/en-us

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• PROBLEM WITH DVD DRIVER 'MATSHITA DVD-RAM UJ8EI.

  All of a sudden my cd/dvd driver will not work. O/s is to win 8 64-bit. I get the following message?

  Reinstall the device driver: problem with the driver for MATSHITA DVD-RAM UJ8EI, MATSHITA DVD-RAM UJ8EI has a DRIVER PROBLEM.

  I have, have repeated the AutoCorrect, but still get the same message. Can someone help me solve the problem?

  Hi Auggy, thanks for the quick response. I did a 'restoration' and now the pilot works again.

  If all goes well it will continue to work. Hope you have a fantastic evening.

• Help: problem with playback device

  Hello

  My dell latitude e7240

  and my headset logitech g150

  does not connect it says: problem with playback device

  It calls for 1 second then ends

  and when my friends try to call the said

  contact can only receive instant messages

  Help, please

  and fast

  Thank you very much

  I did a diagnostic test and other results are here

  https://www.dropbox.com/s/ipvyg52xhfwjrly/Dxdiag.txt?DL=0

  and Skype is the last

  Thank you

  answer soon

  Morgan

  Topic/title edited for clarity.

  Still no trace of your helmet and Avnex Virtual Audio Device is always installed.

  The specified Audio Capture Source only is Avnex Virtual Audio Device

  audio Capture Sources :

  Microphone (Avnex Virtual Audio Device), 0 x 00200000, 0, 0, qcap.dll, 6.06.9600.16384

  Open the Windows Device Manager. Are there looking for this virtual audio capture device, then uninstall it.

• Problems with DVD/CD-RW on Satellite Pro M series

  After searching the Forum questions / answers, it seems that many users have problems with the carpet * a 841 s UJ which is equipped with several types of Toshiba portable computers and I wonder why someone from Toshiba has not been able to intervene and to produce a final solution.

  In my case, I can not format a CD - RW or a DVD + RW because the message "D:\ is not accessible" and also "incorrect function".

  If DLA is selected in properties, can be as much as to be shown to a format selection window, but "Format failed due to general failure" happens.

  Toshiba installation CD will work OK (I did this several times after losing data on the hard drive) but the writing seems to be beyond the capacity of the disc.

  Does anyone have any suggestions?

  BTW, the deletion of "Upper and Lower Filters" registry that I have seen offered as a solution will not work because there is only one entry for low filter - no higher.

  You try to format the two supports using Windows option or using an application like Nero?
  I can't imagine that there is a serious problem with ODD. Test it with Nero. I'm sure it will work properly.

• Problem with DVD/CD player

  Hi I have a HP Pavillion computer p6604f with the Engraver DVD SuperMulti with LightScribe drive technology and it will not work.  It will not be displayed under my count and when I go to Device Manager it says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  Can someone help me with this?  I tried to update the driver using the "update driver" button, but it says it's updated driver there.  This driver is since 2006, there must be something else out there?

  Help!

  Any help would be greatly appreciated.

  Thank you in advance.

  Hello

  Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• Equium A60: Some problems with DVD Super Multi Player

  I have problems with my DVD drive. When I try to load anything (CD or DVD) it will open a blank Explorer window even though I know that something is on the disk.

  Sometimes, windows gives me the error message

  "D:\ is not accessible.
  "The operation could not be performed because of an I / 0 error.

  I have the latest drivers for it.

  How it works again?

  Hello

  Please, remove the drive from Device Manager. After restarting again the operating system should recognize the drive again. Maybe this procedure will solve this problem.

  Good bye

• Problem with DVD Multi-lecteur

  HL-DT-ST DVDRAM GSA - 4083N

  The above is the exact type of my DVD player that comes with my ThinkPad T60 laptop. But now I have problems with it.

  He can't seem to read a specific type of DVD that I usually use to burn data and backup with rescue & recovery. When I place the DVD, which is a Sony DVD - RW, in the car, he just kept reading (I could hear it turns inside), then the player is stopped. I tried several methods, some of which are:

  (1) read the DVD to another drive (it seems to work)

  It happened in may R61i too, so I just called Lenovo and shipped a new for me...

• Problem with DVD I burned

  I burned the DVD on my Windows 7 Professional.  After that I have burn I preview them.  I can't not burn, but I can't preview them on my computer.  They work in another computer in my home.  I find answer to my problem and I tried but I will always have the same problem.

  Any suggestion?  Thank you.

  Maybe a problem with your hardware...

  Is this true for all DVD burn - even GIVEN simple?

• Problems with DVD/CD material

  Hello

  Thought I'd start here and go from there... my wife has a laptop computer that has problems with the DVD/CD player and unable to operate, despite attempts on and off the internet... hours thinking maybe there is a problem with the hardware itself... anyway... she used the player very little anyway and I was wondering what would be the best method of copying a cd bootable on a drive Flash and I can use the USB port to install any CD of this nature... a method that might work with all windows...

  Larry Wöller

  A popular easy utility to use for making a bootable USB key is Rufus. It can also be done with some steps more natively.

  If you don't want to address the problem of the laptop's optical drive, you can also consider getting an external drive.  For example, http://www.newegg.com/Product/Product.aspx?Item=N82E16827136266

  Rufus 1.4.6 build 440

  http://www.Softpedia.com/get/system/boot-manager-disk/Rufus.shtml

  Manual process explained

  Create a USB Bootable Flash drive

  http://TechNet.Microsoft.com/en-us/library/jj200124.aspx

• [help] Problem with datagrid and DB

  Hello
  
  I have a problem with my flex2 app.
  EDIT: happens in all not only in firefox browser
  
  I use one
  < mx:HTTPService id = "userRequest4" url = "DB.php" useProxy = "false" method = "POST" > "
  < mx:request xmlns = "" >
  < / mx:request >
  < / mx:HTTPService >
  
  to send a request to a php script what data back to the database, and these data are load in a datagrid in this form:
  
  < mx:DataGrid id = "dg" width = "100%" height = "100%" dataProvider = "{userRequest4.lastResult.pathis.Product}" editable = "true" itemEditEnd = "getCellInfo (event); ">
  < mx:columns >
  < mx:DataGridColumn dataField = "ID" headerText = "ID" editable = "false" / >
  < mx:DataGridColumn dataField = "number" headerText = "Name" / >
  < mx:DataGridColumn dataField = "price" headerText = "Price" / >
  < mx:DataGridColumn dataField = "S" headerText = "S" / >
  < mx:DataGridColumn dataField = "M" headerText = "M" / >
  < mx:DataGridColumn dataField = "L" headerText = "L" / >
  < mx:DataGridColumn dataField = "XL" headerText = "XL" / >
  < mx:DataGridColumn dataField = "XXL" headerText = "XXL" / >
  < mx:DataGridColumn dataField = "other" headerText = "Other" / >
  < / mx:columns >
  < / mx:DataGrid >
  
  EDH, I call the php script, when someone clik in the menu option:
  private void menuHandler(event:MenuEvent):void {}
  if(Event.Item.@label=='Manage Product') {}
  Add_Products.visible = false;
  Add_Products.width = 0;
  Add_Products.height = 0;
  Add_design. Visible = false
  Manage_Products.width = 500;
  Manage_Products.height = 500;
  Manage_Products.Visible = true;
  Add_design. Width = 0;
  Add_design. Height = 0;
  userRequest4.url = "MP.php";
  userRequest4.send ();
  
  }
  }
  
  and this function updates the DB when the cell is changed:
  
  private void getCellInfo(event:DataGridEvent):void {}
  var myEditor:TextInput =
  TextInput (event.currentTarget.itemEditorInstance);
  Get the new value of the Publisher.
  var newVal:String = myEditor.text;
  var objN = new Object();
  objN.ids = dg.selectedItem.ids;
  objN.dato = newVal;
  objN.fields = event.dataField;
  userRequest2.url = "UP.php";
  userRequest2.send (objN);
  }
  
  and have the property to change the cell, and when that happens to update the database, it worked perfectly, no problems, but when to charge datagrid (I send the request to the DB.php) show this value have cells before that have edited :/
  you know a way to fix it?
  If someone knows please help me, I have urgent need of this :D
  
  Kind regards
  Shadow.

  try to add dummy prameter to your url in the httpservice which will force the browser not to cache xml

  for exempla, you can add '? blabla = "+ {new Date () .milliseconds}"