Help: problems of sharing my internet connection on Vista

Similar Questions

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• Satellite A660 / 07P - problems with my browsers, internet connection

  Hey guys,.

  I just brought a Satellite A660 / 07P.
  I have problems with my browsers, internet connection.

  After a period of time (varies) my browsers stop to connect to internet.
  Skype works fine, as does my download manager and other internet services.

  When I run an internet system restore works again for a period of time, before picking up the handset.
  I used this happens with all browsers (IE, Firefox and Chrome).

  Any help is greatly appreciated.

  Ry ~.

  Hi dude

  Skype works fine. Right?

  This means that the laptop is connected properly to the router and the internet connection has been established successfully.
  I think that a firewall can affect the functionality of the browser. Check the firewall settings.

  In addition you should check if other installed 3rd party tools to affect the functionality of the browser.
  Verify installed tools

  last but not least you could clean the operating system. Use the CCleaner.
  Free is nice tools.

• Windows 7. I recently had problems with loss of internet connection. When I have trouble Shooting, told me that impossible to find a driver.

  I have a desktop running Windows 7 PC.  I recently had problems with loss of internet connection.  When I have trouble Shooting, told me that impossible to find a driver.  The adapter does not appear in Device Manager.  Help!

  Hello

  Definitely looks like a problem with the network device. Check with sound
  Support, their books online, the drivers and ask in their forums (if any)
  on known problems. If there is a control of the device shipped with the system
  Manufacturer (manufacturer of motherboard for customized systems). If a device check separated
  with the support of its creator and other resources.

  You could also remove or disable the device and try a new add-on as one
  new card or device USD. None of those who are dear.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• WIFI problem, Toshiba Satellite A665 internet connection. Lately when I try to connect to the internet, for the first minute or so it says "no internet connection".

  Hi all

  I had problems with my Toshiba Satellite A665 to internet connection. Lately when I try to connect to the internet, for the first minute or so it says 'No internet connection' (or something similar). Basically, he has the yellow warning triangle. Sometimes I can open the browser and search normally, but other times - and this happens more often it won't let me use my browser. When I have not fix the problem, he said that the DNS server is not responding. The problem is this same error happens all. unique. time. and the other computers in the House connect to the internet just fine. I called TWC and what I get on their part, it is "there no reported outages in your area. Useful, right? Tends to be gnawed by the use of Netflix and Hulu Plus, but this has never kept internet bandwidth to work in the past. What is going on? I'm so tired of having to go all the way down the stairs to reset the router every hour (on a good day) to get the computer to connect to the internet.
  I contacted Toshiba and they say that all the drivers on your computer are up to date and nothing is broken. I have also not downloaded or installed anything on my computer.

  If the reset of the router fixes the problem you should probably watch that as the culprit. Check the software/firmware for the router and see if you can borrow to someone router to test.

  I hope this helps.

• Problems with loss of Internet connection

  I have XP and use IE8 and the last two days, I keep losing my internet connection every few minutes. !  Repair the connection works, but there finally falls again.  The icon in the status bar I am always connected.  Anyone know what goes wrong?  Thank you

  Hello
  1. is specific to Internet Explorer question? Are you able to browse the web using other browsers?
  2. do you get an error message? If Yes, what is the exact full error message?
   
  You can try the following methods and check the status of the issue.
  Method 1:
  Troubleshoot network connection problems in Windows.
  http://support.Microsoft.com/kb/313242
   
  Method 2:
  I suggest you to reset the Protocol Internet (TCP/IP) and check the status of the issue.
  http://support.Microsoft.com/kb/299357

• Set the sharing of internet connection using Windows XP & Windows 7 (two laptops). __

  We have two Toshiba laptops, using a Windows XP operating system and the other Windows 7 operating system.  We use a UM175 Verizon Wireless Modem so that in the United States (we are snowbirds) and an Internet Mobile Rogers stick to the Canada.  I have read the article on http://support.microsoft.com/kb/306126 and would like to know if this procedure would allow us to be able to connect two laptops to a modem for internet connection.
  Thank you for your help.

  Use this procedure to connect the modem to the Windows XP computer wirelessly and share the Internet connection with Windows 7 computer.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Primary DNS problem - constantly loss of Internet connectivity

  I've had this problem for some time now and I have not yet found a solution.

  I use a laptop Toshiba A215-S7422 (Vista). He has been nothing but a pain to operate, many errors and problems. But, I shouldn't use a Toshiba anyway...

  It loses Internet constantly. I have to keep diagnosing the problem, and it's always a primary DNS error. I use 2 other computers and they work fine, so I don't think it's my network.

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L100 - connection problems with a wireless internet connection

  Hello

  I had some of my Satellite L100 connection problems to my sky wireless broadband connection. My laptop detects the connection and I have a bubble appears confirming that the wireless connection is connected. However, when I open internet explore it appears with 'cannot display the page'.

  Now, the wireless works with our other non-Toshiba laptop so I know that the connection is ok but it does not connect with my Satellite. Is there something I can do?

  Try reboot you the router. In many similar situations, it helps me.

• I have problems with my wireless internet connection.

  It will connect and stay connected for a while but then at the same time, he will say it is plugged into the router but no internet and all I have to do to fix is to run the troubleshooter and it restarts the adapter wireless in my computer. but on the resolution of the problems then says that the default gateway is not found. How can I fix so it continue to happen? here is an idea of what it looks like after the resolution of problems is run

  Hi evanhoozier,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  Reference: why I can't connect to the Internet?

• problems to make the internet connection on computer starts

  That's my problem... I turn on my laptop, no internet, I have to click on the Start button go to administrative tools, open services find wirless zero configuration and turn it on. then close all windows. I go to the blue toolbar at the bottom of the screen and then click the only Wi - Fi computer, open it, find the check box "use windows to configure the network settings" click this box close this window. Then, I have internet. Anyone know what is happening?

  Hi jmsmom2007,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. have you anythird party network or Wireless Manager software installed on the computer?

  If you have any third-party network or Manager software installed on the computer wireless, I would say that you uninstall and check if the problem persists.

  If you don't have such software installed then I would suggest that you perform the clean boot procedure and check if it works.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Also, make sure that the wireless zero configuration service is enabled when you follow the steps in the clean boot procedure.

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with Cisco 881, internet connection

  I have a newly addedCisco 881 connected to a firewall, which is connected to the ADSL. We have added to the wireless and when wireless clients connect to the network (using standalone APs) they are capable of anything on the 192.168.88.0 network ping. They can also ping the firewall 10.0.88.1, but only because it is on the same network as port fa4. It seems to me like there is a problem with my default routes, but they look good, and I have tried different methods to do this. Here's the running-config on my 881, please help!

  Wireless_881 #show run
  Building configuration...

  Current configuration: 3679 bytes
  !
  ! Last modification of the configuration at 15:45:48 UTC Friday, July 27, 2012
  version 15.2
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  encryption password service
  !
  hostname Wireless_881
  !
  boot-start-marker
  boot-end-marker
  !
  !
  logging buffered 51200 warnings
  Select the secret 4 Ng0lbQgI3BKsMMXv78pz6UP80gaDVrhUBQB3XKZMl3M
  !
  No aaa new-model
  iomem 10 memory size
  !
  Crypto pki trustpoint TP-self-signed-1620898290
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1620898290
  revocation checking no
  rsakeypair TP-self-signed-1620898290
  !
  !
  TP-self-signed-1620898290 crypto pki certificate chain
  certificate self-signed 01
  3082025A 308201 3 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
  69666963 31363230 38393832 6174652D 3930301E 170 3132 30373132 31353431
  30365A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 36323038 65642D
  39383239 3030819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
  8100ED42 50BD2E07 D6A61E1C 7A8C236F 5499F47D 0FF2F1AC 23657162 66769F02
  92921298 C4E68A84 B90B572D 300 C 6653 ADAB41F2 005F1544 122C99DF 16AA1F01
  D3DC117D B92750F5 F6C2D4CE D6D173C5 A197E9C2 7B5EEF9B 4B2404BD D8243ABB
  14EFF08B 21DE9D0A B11610EB 624E3B22 17BA1C73 60212253 DE86D7B8 EFD5771E
  18B 90203 010001 HAS 3 8181307F 300F0603 551D 1301 01FF0405 30030101 FF302C06
  03551D 73735F38 38312E70 616C6D65 74746F63 11 04253023 82215769 72656 C 65
  6974697A 656E732E 6F726730 1 230418 30168014 BDFA0DBF FE8B72A7 1F060355
  9B2D214C 466C1EDF 33D2FA3F 301D 0603 551D0E04 160414BD FA0DBFFE 8B72A79B
  2D214C46 6C1EDF33 D2FA3F30 0D06092A 864886F7 010104 05000381 8100E0EF 0D
  6D122A92 75ABE448 620EEDAD 131569 D 2 05BEB6D9 FA77DF2F 87FD464F 8111454F
  CAE20CC2 580C8DC8 421065CD 31CF2F79 00722044 4B99E26A 5C48FD2D 2DCE835B
  D0ADBD53 B768064B 9E4AB048 F0E9F751 11C9DA51 8EA9C1D3 DCEB136A EE3944D7
  FD7EF038 DE965699 DAC4186F 3AAEBD85 B95F05D1 B3AF0BD5 566498 3 6424
  quit smoking
  !
  !
  !
  DHCP excluded-address IP 192.168.88.1 192.168.88.10
  !
  PCFCU dhcp IP pool
  network 192.168.88.0 255.255.255.0
  router by default - 192.168.88.1
  Server DNS 208.67.222.222
  !
  !
  !
  no ip domain search
  IP domain name *.
  IP cef
  No ipv6 cef
  !
  !
  license udi pid CISCO881-K9 sn FTX161080BP
  !
  !
  username privilege 15 secret 5 mgaskin $1$ y8... $cCDIZqgRtHqBbsh36XW9d.
  username privilege 15 secret 5 jlivingston $1$ Qs6L$ mhAtoKguqLmzmlfGbMYqW.
  !
  !
  !
  !
  !
  property intellectual ssh authentication-5 retries
  !
  !
  !
  !
  !
  !
  !
  !
  !
  interface FastEthernet0
  switchport access vlan 880
  no ip address
  !
  interface FastEthernet1
  switchport access vlan 880
  no ip address
  !
  interface FastEthernet2
  switchport access vlan 880
  no ip address
  !
  interface FastEthernet3
  switchport access vlan 880
  no ip address
  !
  interface FastEthernet4
  IP 10.0.88.2 255.255.255.248
  NAT outside IP
  IP virtual-reassembly in
  automatic duplex
  automatic speed
  !
  interface Vlan1
  no ip address
  !
  interface Vlan880
  IP 192.168.88.1 255.255.255.0
  IP nat inside
  IP virtual-reassembly in
  !
  default IP gateway - 10.0.88.2
  IP forward-Protocol ND
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP nat inside source list 10 interface FastEthernet4 overload
  network default IP 0.0.0.0
  IP route 0.0.0.0 0.0.0.0 10.0.88.1
  !
  access-list 10 permit 192.168.88.0 0.0.0.255
  not run cdp
  !
  !
  !
  Line con 0
  line to 0
  line vty 0 4
  password 7 144F425C5D14292D273D6B657A46
  opening of session
  transport telnet entry
  !
  max-task-time 5000 Planner
  !
  end

  and if you disconnect the router announcement use pc directly to the firewall with ip 10.0.88.2 work?

• Satellite A100-906: slow internet connection with Vista

  Hello world...

  I installed vista ultimate and I must say it's great... the problem is that the connection to the network is so slow... on xp, I used to get speeds up to 4.5 kb on my connection dial-up... on vista, I almost reach 1.5 KB... can someone tell me what is the problem and how can I solve this problem...

  Maybe your TCP settings are not correct? Try searching on google for some tools that configure your tcp and internet settings correctly, then maybe you can solve it this way.
  BTW, I Don t think this is a related thing of material...

  Welcome them

  P.S.: Reinstall the drivers sometimes helps...

• Failure of intermittent internet connection using Vista on Verizon DSL

  I had problems with Verizon DSL stopping randomly and does not to return to the top for an unacceptable period of time. Oddly, it doesn't happen on the Vista machine at home. None of the Mac has this problem.  If I remove the machine network Vista and replace it with a XP machine is also no problem.  It's on a cable network.

  I think I can find some interesting information. What I did was as much the DNS entries my network connection that I could find. I have used google, OpenDNS, DNSadvantage, Verizon, Norton a few steps from my web services and everything else I could find. There certainly reduce questions but had some interesting effects for example one of the URLS pointing to obsolete the secondary DNS information.

  I'll post the DNS entries here except those owned by my web host.
  8.8.8.8
  8.8.4.4
  151.201.0.68
  208.67.222.222
  208.67.220.220
  156.154.70.1
  151.201.0.39
  141.150.0.68
  141.151.0.68
  141.151.128.68
  141.155.0.68
  71.252.0.12
  71.242.0.12
  192.168.2.1
  156.154.71.1
  198.153.192.1
  198.153.194.1
  4.2.2.1
  4.2.2.2
  4.2.2.3
  4.2.2.4
  4.2.2.5
  4.2.2.6
  67.138.54.100
  207.225.209.66

  To enter these click on "Start"-> "Control Panel"-> "Network and sharing Center", click on "Manage network connections", double click on the active card, click 'Properties', double click 'Protocol Version 4 (TCP/IPv4) Internet', click on 'Advanced... '. ', go to the "DNS" tab, click on "Add..." "and enter the values.

  This is not a complete solution. Sometimes, still, but not as often. Some sites still bring the network to its knees.  Sometimes she lets wait for the connection to be reborn and run a WHOIS on the site that has the problem of one of their DNS to add to your list. I put it to the top after google's servers and it seems to work most of the time.

  I went through all of the so-called "patches" of this problem without success.   What is the solution?  It seriously makes me batty.

  Hi mark11_23,

  Got several things for you to try:

  1. How old is your router, you should consider updating the firmware on your router. Some older routers do not sit will be Vista (or 7) and require an update of the firmware.
  2. Update the driver for your NIC directly from the manufacturer's website. You'd be shocked to see how many sons of connection to network on these forums are caused by a newer driver.
  3. No chance that you are able to get the issue of duplicate mode safe?
     http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  4. If the problem does not occur in Mode safe mode, go to a clean boot and locate the item causing the problem.
     http://support.Microsoft.com/kb/929135
  Let me know the results!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ICS: Internet connection sharing ERROR while allowing IP.

  Hi all

  My "Netgear" router gives the IP Address of the gateway 192.168.0.1 and my laptop is connected via a wireless connection. When I turn on my connection sharing wireless internet connection, windows xp tells me with the message below:

  "When Internet connection sharing is enabled, your LAN adapter will be on use the 192.168.0.1 IP address." Your computer may lose connectivity with other computers on your network. If these other computers have static IP addresses, you must set them to obtain their IP addresses automatically.
  "Are you sure you want to enable Internet connection sharing?"

  When I press 'Yes', it gives me an error:

  "An error occurred while Internet connection sharing was being enabled.

  Internet connection sharing cannot be enabled.
  A LAN connection is already configured with the IP address that is required for automatic IP addressing.

  My question is, if we can configure ICS service to activate other windows of the IP ADDRESS is required to apply?

  Thanks in advance for your help...

  I'm sorry, but ICS is completely inflexible and does not change its LAN IP address.

  The settings that you found are for something else: allowing unsolicited Internet connection requests to pass through the firewall on the ICS computer to a client computer.

  Change the address LAN IP of the router.  It is easy to do and will solve the problem.