Help request - showin 0 instead of blanks

Similar Questions

• Chm file met poster "HTML help" on the title instead of the name of the window bar

  Chm file met poster "HTML help" on the title instead of the name of the window bar.

  I tried several ways such as:

  1. modify the > project name settings and also set the language to English (United States).

  2. check the name of the title in the .hhp file

  3. use the window while compling.

  4 Robohelp language settings.

  5. also uninstalled and reinstalled robophelp.

  But nothing helps

  Title name appear correctly if the same project is compiled on another machine.

  When the code in the high hydrostatic pressure and the locale on a correspondence of PC, the title OK is displayed. Or the other way around is also worth the title help is displayed in the language specified in the project IF (and only if) the regional settings of the computer matches the language. Otherwise, the "HTML Help" is displayed.

  Hope this helps.

  Thank you and best regards,

  Rahul Karn

• Why is my help requests being deleted?

  3-4 of my requests for help last week disappeared.

  I'm still waiting for assistance.

  My messages were respectful at all times.

  Why is this done?

  Spitfire,

  Maybe they were duplicates, as these two?

  Results of terminal script below for frozen, then slow cursor

  Frozen cursor MacBook Pro 13 "w updates

  

• Help request for C:\windows\system32\config\system / Bad Pool Caller / on xp

  . Hi, I have xp sp3, and after the established cat off for switching on the pc appears the error message mentioned.  I tried f8 for boot from the sp3 installation CD and ends up with the BAD_POOL_CALLER message.  That's why I can't launch 'r' for recovery apparently safe mode.  Any suggestion would be appreciated before gratefully the cat gets it... Thank you.

  Well, if you can start on some CDs and get to a command prompt on your HARD drive, you should be able to implement the suggestion of KB307545 of Microsoft Support Engineer Halima S and "check if it helps" (I don't think it will be).

  Here's how you describe / have symptoms that indicate the need to use KB307545:

  Zero

  If you want to make a bootable CD from the Console of the Recovery XP (no XP media required) and then to implement the proposal of Microsoft Support Enginner Halima S and check if it helps.

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  When you get into RC, is if you can run a chkdsk/r...  Here's how:

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Help with connecting cable HDMI = two blank screens and no way to choose the mirror option

  I'm not too familiar with the HDMI from my computer cable portable gateway to screen TV flat emerson. I plugged in the cable and accidentally clicked on the option to show only the monitor 2. Now, the screen is blank when the cable is connected. Would not be so bad if it would work on the TV... more.Unfortunately which is not the case. Now I have two screens blank when the cable is plugged :( I tried changing the settings, but it won't let me unless the cable is apparently? Help, please! SO FRUSTRATED

  Hi Gavsmomma,

  I suggest you to update the video graphics driver and check if it helps.

  Updated a hardware driver that is not working properly

• Help request deleted blackBerry smartphones! I want to go back!

  I accidentally deleted the request for help while trying to remove a third-party application. I was surprised that a, I fact and two, let me not! How do I get it without having to reload all the software completely (and lose all my other apps)?

  Open your Desktop Manager > application loader, run it and CHECK help load.

  If nothing is present in the application loader, you need to charge your current device OS on your PC.

• Need help request!

  Hi all

  I am faced with a request to generate a model:

  The problem is the following:

  I have a test table in

  create table test

  (

  Identification number,

  varchar2 (20 char) value,

  date date

  );

  and the row values are as follows:

  value date: ID:

  1:value1:Date1

  1:value2:date2

  1:value3:date 3

  where date1 is today, date2 is yesterday and date 3 is the day before yesterday.

  I have to generate a format like below:

  ID: old_value:new_value:changed_date

  1:value3:value2:date2

  1:value2:value1:Date1

  where id, old_value, new_value and modified date are columns.

  Any suggestions would be helpful.

  select *
  from (
    select id
         , lag(value) over(partition by id order by dt) as old_value
         , value as new_value
         , dt as changed_date
    from test
  )
  where old_value is not null ;
  

• Help request NULLIF

  Hi all

  I wrote the request to show that if the sal & comm are same the result should display 'same' thing below, it should display "diff".

  Select nullif (sal, comm), ename

  WCP

  where is nullif (sal, comm) =: nullif (sal, comm)

  then dbms_output.put_line ('same')

  on the other

  dbms_output.put_line ('diff')

  /

  But I get the mentioned error below

  SP2-0552: Bind "NULLIF" undeclared variable.

  Help is kindly solve its appearance like why and what needs to be done.

  Thank you...

  Others have mentioned your errors of syntax and other ways to do the task, but nobody gave the reason for the specific error that you got.  Here it is:

  Select nullif (sal, comm), ename
  WCP
  where if nullif (sal, comm) =: nullif (sal, comm)
  then dbms_output.put_line ('same')
  on the other
  dbms_output.put_line ('diff')

  The equality in SQL and PL/SQL operator is = and in PL/SQL assignment operator : =. There is no =: operator anywhere, if the compiler sees the: nullif as a variable binding.

  John

• Help request Service!

  In a Service request, I created a field of type is TimeStamp. The name of this field is "Suspension to start."
  I would like the default value in this field is the exact time of the time when I change the status of the demand for services and the State is monitoring.
  When the status of this service request stands in assisted, the value of the field ('Suspension start') must be null, when the State becomes assisted, he is practically should be valued with the time of the change.
  
  
  I wrote in the service of the default:
  
  IIf ([< status >] =' attesa', Timestamp (), 'Null')
  
  but it does not work, how do I do?
  
  
  later as I do to develop a new field (end Suspension) with the exact time when the demand for services status changes to in a attended a different value.
  
  Help me, please!
  Thanks Vale.

  Hello!

  When you have selected the status field in the field list, simply click on the link to the right of the drop-down list field. It will allow you to select the status you need and it will add LookupValue() in your state.

  Try and test it and tell me...

  Max

• With the help of black ink instead of black ink cartridge Photo

  I have a HP Photosmart Premium 309 has and would like to know what are the settings that I need to change so that when you print a text document it uses black ink instead of the photo black ink.

  OR

  What settings should I change my 309 uses a black ink instead of black in photo is not serious what I print?

  See the solution here:

  http://h30434.www3.HP.com/T5/other-printing-questions/using-photo-black-instead-of-regular-black-for-general-printing/m-p/738137#M40287

• Help requested by Experts of HP only please.

  I would like some advice on a lemon I've been stuck with.

  17 SEP 2013, I bought a new dv7-7233nr desire. Right out of the box, I noticed a slight problem with the display. A task about 5 mm in diameter in the upper left quadrant was discolored or faded looking. I decided to just live with him at the time. A few weeks later the right hinge began to split in two and I could see the mechanical parts inside the hinge. As with my first question, I decided to just live with this question.

  Everything was working great and I fully enjoyed my notebook and was very happy with it. Then the Windows 8.1 update is out and has been dutifully installed by your truly. It is then that all my troubles began. I started having problems where at random times, the laptop would spontaneously stop, restart or freeze just several minutes at a time. The way things worked, I thought that there was some sort of conflict of software to the origin of the problem. After trying for weeks to fix the problem, I decided to wipe the hard drive and replace everything by the restore disks that I had purchased from HP.

  Well well just a few minutes into the routine of erasure of disk a kind of error message popped up saying that due to the alteration of the disc the program wipe could not go further. So I reboot the machine, only to get stuck to the dreaded "CAPS LOCK" flashing light that blinked continuously without any model. This time I had no choice but to involve technical support HP and I went online and after talking with a technician he was allowed to return to HP for repair.

  This started an oddessey on December 16, 2013, that doesn't seem to end. I shipped my unit for repairs on 20 December 2013 where it was received on 24 December 2013. After the Christmas break the repairs have been made and the unit was sent to me on January 2, 2014. Among the items repaired or replaced were the HARD drive and the system board. Nothing has been mentioned about the faulty display and broken hinge and a large part of my chagring that neither item had been repaired.

  To say that I was a little disappointed is an understatement. I contacted HP immediately and explained the situation to the technician who seemed sincerely simpathize with my situation while she began a faster repair process to correct two errors which had missed the previous repair center. She took me to a shift of 1 day instead of 2 days for only my qualified guarantee me shipping. I thought that this extra effort was very nice and I happily sent my laptop in for the second time on January 6, 2014. Now for the second time my laptop was repaired and sent back to me on January 13, 2014, two days ago only.

  Well, my story gets sadder. This time the repair center managed to solve the problem of the video display by replacing the window Panel and before any view. It was great, I thought! Then when I opened the lid of the laptop, I could clearly see the same problem with the hinge right split open as he had been all along. I looked through all the paper work that was sent with the appliance as well as electronic documents that had been sent to me and it was not a simple thing mentioning the right hinge repair. He had not yet been considered. At this point I'm just upset.

  I contacted HP for the third time on this problem and I was told that someone in authority would call me to discuss the possible options that might be available to me and to know what went wrong with the repair team and that they would work directly with me to make sure that everything has been done properly this time. Asked me my phone number and a time to convinent to call.

  Well it didn't happen either. No one from HP called me to discuss all the 'options' as replacement under my States lemon laws. Nor can I talk first hand to a person in a position of 'authority' as I was told to wait. Instead two days later, on 15 January 2014 I discovered that this thing is treated as if it were the first time he was going to be sent in for repair. I was not extended the courtosey to have the speed of navigation, upgraded in the air the next day or any other indication that this would be done at a fast pace.

  If you have followed my story all along, then maybe you can understand why at this point I am absolutely Livid with HP service and would really like the chance to talk to a real person such as the Manager or the Director of the service department there in Grapevine, Texas. I want really to use harsh language and do it to a very strong and vigorus volume just to make me feel a little better. But I'll settle for a civil conversation and get some sort of action as ensuring that this repair is the subject of a follow-up and hand carried over in the process of my someone in management and an attempt to ship the unit to me using the delivery the day even or at least the next day gaurunteed 08:00.

  My question to you Experts HP here is you think that this could make it happen? If I can't return this laptop to me before the end of this week, as January 18, 2014, so I couldn't return at all. I can just use it with the hinge collapse as long as no other damage occurs. Maybe a little later in the year then I could make time to get the hinge repaired correctly. Do you think I would run in any warranty problem, if I decide to wait? I really want to cut my nose off just to spite my face.

  If you could advise me on which I could call on this quandry, or just what you think would be better for me to do at this point, you really do me a huge favor, not to mention restoring my faith in HP s Comsumer products.

  In any case thank you for reading my sad rant and I hope you have a great day.

  Best regards
  FlyingHorse
  
  Product name: HP ENVY dv7-7233nr Notebook PC
  Product number: C2N68UA #ABA
  

  FlyingHorse, I saw your post and has forwarded to the right people for their review. You should hear from someone bit via private message on this Forum.

• Logic of long-standing problem - help requested

  3.6.1 numbers using

  I am trying to improve the process that I do in my work. I have download and regularly need to massage ~ 850 lines of spreadsheet data but the variables seem to be either impossible to work with or the method required beyond my comprehension. Can someone please help save me from going bonkers?

  • Data records of the directors and their users, sometimes 0 users, no maximum.
  • Users share the same alphanumeric ID as their directors
  • There are two types of administrators; Like 'John Allagain' and 'other' individual directors.

  I need to order the entire worksheet go something like this: (only ordered by ID alphanumeric)

  1234 4321 328 ZZZ	CARIS Easton	User
  1234 4321 328 ZZZ	Jerri rains	User
  1234 4321 328 ZZZ	John Allagain	Administrator
  1234 4321 328 ZZZ	Letha Piper	User
  1234 4321 328 ZZZ	Kenelm Brams	User
  1234 4321 328 ZZZ	Noelle Walter	User
  2345 4311 456 ZZZ	Chris Stopme	Administrator
  2345 4311 456 ZZZ	Tennyson sand	User
  3456 6543 345 ZZZ	Katelyn Elvis	User
  3456 6543 345 ZZZ	White Leyroy	Administrator
  3654 3873 683 ZZZ	Rowena Dixon	User
  3654 3873 683 ZZZ	Suzie Blankichip	Administrator
  4235 7431 123 ZZZ	Bob Jones	Administrator
  4235 7431 123 ZZZ	Unity Granville	User
  6543 3455 875 ZZZ	Benny Hurst	User
  6543 3455 875 ZZZ	Nancy Zinger	Administrator
  6543 3455 875 ZZZ	Randy Rennoll	User
  9384 5837 443 ZZZ	Kitchen of Gaylord	User
  9384 5837 443 ZZZ	Janessa Howard	User
  9384 5837 443 ZZZ	John Allagain	Administrator
  9384 5837 443 ZZZ	Laraine Wyght	User

  To do this:

  1234 4321 328 ZZZ	John Allagain	Administrator
  1234 4321 328 ZZZ	CARIS Easton	User
  1234 4321 328 ZZZ	Jerri rains	User
  1234 4321 328 ZZZ	Letha Piper	User
  1234 4321 328 ZZZ	Kenelm Brams	User
  1234 4321 328 ZZZ	Noelle Walter	User
  9384 5837 443 ZZZ	John Allagain	Administrator
  9384 5837 443 ZZZ	Kitchen of Gaylord	User
  9384 5837 443 ZZZ	Janessa Howard	User
  9384 5837 443 ZZZ	Laraine Wyght	User
  2345 4311 456 ZZZ	Chris Stopme	Administrator
  2345 4311 456 ZZZ	Tennyson sand	User
  3456 6543 345 ZZZ	White Leyroy	Administrator
  3456 6543 345 ZZZ	Katelyn Elvis	User

  3654 3873 683 ZZZ

  Suzie Blankichip

  Administrator

  3654 3873 683 ZZZ

  Rowena Dixon

  User

  4235 7431 123 ZZZ

  Bob Jones

  Administrator

  4235 7431 123 ZZZ

  Unity Granville

  User

  6543 3455 875 ZZZ

  Nancy Zinger

  Administrator

  6543 3455 875 ZZZ

  Benny Hurst

  User

  6543 3455 875 ZZZ

  Randy Rennoll

  User

  The hierarchy resulting is therefore:

  • Each Director named John Allagain, with
    • Their respective below, users followed
  • Each of the other directors, with
    • Their respective under users.

  How do I get there?

  You can try something like this:

  Sort by C:

  

  Then sort by A:

  

  I'll give you this:

  

  Insert cells empty and drag John Allagain to the top.

  If you have a lot of John Allagain throughout the table, then you might duplicate column C column D, change all the values of the administrator for John Allagain in column D for 1success (leaving the other values of the administrator the same).  So the same sequence as above except you would first sort on column D (not C), then on column A.

  Best to make a backup of your table before you try this, in case you're wrong and you need to start over.

  SG

• Compaq 6715 b No. WiFi help requested

  I just made a new clean install of Windows XP sp3 and can't seem to get the wifi working. I just bought this 2nd hand computer. Everything seems to work except the WiFi. I think I installed all the drivers, but I'm not sure. I have the little blue light at the top of the keyboard, but still nothing.

  I have zero unknown in Device Manager.

  I have two monitors icon in the status bar that says "Bluetooth Network" (a network cable is unplugged), but I don't have any bluetooth device.

  The other icon of two monitors is the Internet cable which is connected and working.

  I reinstalled the card wifi without result, it doesn't seem fair... Check in information system/network and there was no wireless adapter. So, is this map? Mobo?

  Any help would be appreciated.

  Hello:

  I agree that the motherboard has a problem.

  (Being the exact same model) wireless card would have passed the BIOS check and worked, because the map is a map of known work, or you would have gotten the unsupported BIOS wireless card stop Code if the motherboard has picked up the card and BIOS has rejected.

• HP dv9700z Windows XP DownGrade help request

  Dear all,

  I installed Windows XP on my HP dv9700z laptop.

  I have three missing drivers.

  You could help me find the following drivers?

  1. Ethernet controller

  2. SM Bus controller

  3 Ricoh 1394

  Thank you in advance.

  NVIDIA Chipset, install and reboot, choose the option install mediashield drivers_no ONLY:

   

• Cannot right click Windows 7 Explorer of files to generate the copy of the file names in a Notepad or Excel-compatible file. HELP REQUESTED!

  I struggled for several hours to restore the service right click that I used to have XP to Windows 7.  I need to save lists of file names such as displayed in the file Explorer. Allowing you to right-click and save files in Notepad. This option has been removed in Windows 7 and anything put in place to restore it.

  I have lists of items in the inventory and need to copy and paste the image corresponding to a transfer sheet to allow the server names to match images in article SKU.  The file names are long and typing is a complete waste of time.

  I used to be able to find them in the Windows Explorer, right-click on the directory and generate a txt file that I could open in Notepad or Excel.  -Easy.  Now right-click only allows an export in an uneditable image in ONE NOTE. This is useless for me. I can't do anything with an image file - I need the editable data.

  Is there a solution?  I need only the file name and extension, not the full path, in a text or spreadsheet document propagation.

  I had used the Microsoft solution to install their dose without knowing the final format was a NOTE image file format and not a simple txt file. I try now too write the batch file:

  %windir%\Printdir.bat

  or edit it in order to keep the file in Notepad and do not make the final conversion into a single Note.

  The problem is that the fix from Microsoft, designed to fix this problem, has placed the conversion file in the root directory and it cannot be overwritten.  I refused the possibility to delete, edit or write the file due to the requirements of administrative privilege mandated by the security of Windows 7 too much.

  So if anyone has a solution to every problem - that would help - I am very tired and frustrated and not happy with Microsoft.  Their zealous concern with security made their unnecessary programs for me and have further discouraged me to convert to the windows 10. frustrations and nightmares are waiting for me there I can't imagine.  What I really want to do at this point is to go back to XP.

  He ate five hours of my day. I don't have the time to fight like that. I am trying to be productive, but all I got are monumental technical walls and roadblocks - often designed into the system. Frustrating doesn't begin to describe it.

  Found a solution on a Web site:

  http://www.watchingthenet.com/how-to-print-a-directory-tree-from-Windows-Explorer.html

  They said it was for VISTA, but worked for me under Windows 7. You will need to use Notepad to the command prompt and select run as administrator to save the file in the root directory.

  Thanks for the help.

  Cheers.