Help required - "error: an error occurred during reconfiguration."

Similar Questions

• Error: An error occurred during reconfiguration.

  
  I converted several physical servers in our Vsphere ok but with this server, it says: "error: an error has occurred during reconfiguration." after the transfer of all data.

  I have attached the log file to this and hope someone can help me solve this problem.

  Thank you.

  Hello

  On your newspaper, I see this error: 2013-07-07:00 [08536 error "Default"] Found dangling SSL error + T 25, 11: 42:41.163: error:00000001:lib (0): func (0): reason (1) [0]

  Can you please check this KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2002296

  Kind regards

  Julien.

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

• Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

  Hello

  Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

  Hi ErikLee,

  Do you have MS Outlook installed on your computer?

  Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
  If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

  Follow the instructions below and check if the problem is resolved.

  1. reboot your computer, and then start Windows Mail.
  2. on the Tools menu, click Options.
  3. in the connection tab, click on edit to open the Internet Properties dialog box.
  4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
  5. click OK again to close the Options dialog box.
  6. exit Windows mail and restart Windows mail.

  If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

  To download Windows Live Mail, visit the following Microsoft Web site:
  http://get.live.com/wlmail/overview

  For more information about Windows Live Mail, see the Microsoft Web site at the following address:
  http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista an

  Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system. May this be the cause?

  Error 1935. Assembly Microsoft.VC80.CRT component | Install | Adobe Creative Suite 5.5, CS5, CS4 | Windows

• P2V fails with "error: an error occurred during the reconfiguration.

  Hi, we're starting everything just to P2V of our servers and start easy (I thought) qith our WSUS server. Every time I start the job fails on 98% with the error "error: an error occurred during the reconfiguration. I tried to re-boot, I tried to tell the wizard not to include a disk which is compressed. and I tried making minimal changes to the settings all with the same error...

  I don't know what to try next...

  I have attached the diagnostic logs in the hope that some kind soul can point me in the right direction...

  Thank you very much

  Matt

  Have you tried to remove the/3 GB switch to the boot.ini file?

• What is confirgaration 213:11 error occurring during the opening of adode software that has already been installed

  What is confirgaration 213:11 error occurring during the opening of adode software that has already been installed

  Hello

  This error appears when you don't have access to read/Wrire in file required to run Software (SlStore)

  > Try to run the Application as administrator (right click on the Adobe application and select run as administrator)

  > See

  Error "license store does not allow writing | Install log | CS5, CS5.5

  > Meanings must solve if it does not reinstall the Application

  Let us know if this helps

  ~ Assani

• When I insert my apple ID for FaceTime then show these words (and n error occurred during results. Try again)

  Dear I have a problem in my FaceTime for the e-mail address, of FaceTime also work on cell phone, when I insert my apple for FaceTime ID then show these words (and n error occurred during results. (Try again). Please help me and tell me what is a problem. Thank you

  < re-titled by host >

  See if it might help - If you get an error when you try to activate FaceTime - Apple Support or iMessage

• MacBook: An error occurred during activation. Try again

  HI, I use MBP and this problem has been persistent for more than 5 months now.

  I'm on El Capitan version 10.11.6. I get the message "an error occurred during activation, try again" when I try to Sign In.

  My Internet speed is ok, ok account password. Already connected to iCloud and App Store with the same password. IMessage + Facetime, I am not able to connect.

  Help, please. Thank you

  Using two-step verification or two-factor authentication?  If so, you need passwords for specific app for FaceTime and Messages.

  Passwords using specific app - Apple Support

  If this is not the case, see this article.  It is written for iOS, but if you translate the suggestions in other similar to OS X, it should solve your problem.

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• Unable to sign in imessage: an error occurred during activation. Try again.

  Greetings,

  I just got my board battery and logic changed on the apple store, and since I can not sign in imessage. I get the following error: an error occurred during activation. Try again. I tried to reset the NVRAM, but I still get the error. My internet connection is fine, my e-mail works.

  Thank you for your help.

  Hello

  Open the purpose of this Mac from the Menu of the Apple icon top left point.

  Tab preview is to display the serial number.

  If this is not iMessages will not work (resetting the app just does not this account)

  Return to the repairer and put back it on the logic board (this is supposed to be part of the process)

  If you check it matches what is on your Mac (back, down, or battery compartment)

  If it is 'false' then get his change.

  There is a chance that this has also blocked using Apple ID for iMessages by this computer on the iMessages servers.

  The serial number is used to provide a specific connection of the device.

  IF this does not work after correction or get the serial number to the logic board, you will need to contact the Apple Support (same as Apple Care).

  Once you have explained that it is a matter of Apple ID, he should be free to Fix.  This does not mean that the person of level 1, you talk to knows what to do (they lead script for Apple care issues)

  Ask politely to speak to someone more important.

  Even in this case they may insist on collecting data and hoop jump.

  Based on others who responded that it now gets the engineers involved (the question happens separately the question of the logic board)

  Insist that the server is given regarding the use of your Apple Mac.

  Update or upgrade does not work and neither did a reinstall.

  Even in this case, they can tell you that it could take days for a resetting to filter through.

  

  20:43 Friday. June 10, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• An error occurred during the update the firmware. -16

  I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I'm not sure what is the problem...

  Your airport is now not working? That is, the reset did not work.

  OR

  It doesn't have to be upgraded after several attempts?

  The airport is connected to the network as usual? You have full internet access through the airport?

  What model is the most convenient airport?

  The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

  What is the current firmware?

  If it is a very old model, they can sometimes give wrong if it has never been updated.

• an error occurred during activation

  I have not found a solution. Help, please.

  Mini iPad, iOS 9.2

  I can connect to the App Store, download applications and update them. When I try to record Messages or face time with my Apple ID, I get the message "an error occurred during activation. Try again. "I am always logged on the App Store with the same ID. What gives?

  I don't have a cellular device.

  I have reset. The reboot.

  I don't have a computer, and it is never linked to iTunes.

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• Installation of El Capitan problem: "an error occurred during the preparation of the installation. Try running the application again. »

  I've been a fight 2 days now trying to improve my iMac 21.5 2009 end of Mavericks in El Capitan, but as the installation is about to be launched I get this message "an error occurred during the preparation of the installation. Try running the application again".

  Here is a list of all the things I've tried:

  Running the application again;

  Move the installation to another folder application;

  Control date & time and it was already correct;

  Do the installation in safe mode;

  Installation of the upgrade of another user I created only for that purpose;

  The computer restarts and I tried install the upgrade several times;

  And, to be sure that the installation application was not corrupted I made a copy of it on an external HD and tried to install it on my 2011 MacBook Air and it worked (I didn't install because I have El Capitan installed on my MacBook).

  Well, I don't know what else can be done, and I'd rather not have to completely restore my iMac.

  Please try installing again after taking each of these steps you have already taken it.

  Step 1

  Reset the PRAM from your computer.

  Step 2

  If possible, set the clock system as indicated here. If you can only boot into recovery mode, see below.

  In the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history. Load this web page.

  Triple-click anywhere in the line below to select:

  date 0801000014

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. Paste in the window by pressing the command-V key combination.

  Wait for a new line ending with a dollar sign ($) below what you entered. If it does not appear, press return.

  Quit the Terminal to return to the main screen.

  Step 3

  If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine. Do not install more memory to the maximum value specified, even if a seller of RAM, or someone else, said you that it will work.

  Step 4

  Back up the data at least two different storage devices, if you haven't done so already. A backup is not enough to be sure. Backups are possible with Time Machine or disk utility. Preferably both.

  Erase and install OS X. This operation will destroy all the data on the boot volume, if you be better be sure backups.

• Games on the Internet give the error "a network error occurred during communication with the game server. "Error code: 0 x 80041006.

  I ran the System File Checker tool analysis. Response has been no problem with the configurations. Also, I did uninstall and reinstall. I keep getting the message: "a network error occurred during communication with the game server. "Error code: 0 x 80041006 ' this error message occurs on all the computers I own.

  Actually, no, the answer in the links were also less than helpful... suggested this, that.  Things that I had already done b4 posting my question.
  More funny: after that I posted my comment about the fault is not not in my machine and those of thousands of others, but in MS, spades servers suddenly started working again.  Coincidence? No doubt, but still...

• Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.

  Following error message encountered when installing SSO64 bits on Windows Server 2008 R2 Standard 64-bit edition.

  Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.
  [12:40:34 of Info] List MessageBox with text: Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC. Return code: 1

  I tried to reinstall VC ++ 2005 SP1 Redistributable, but it did not work.

  I tried to rename a folder for vc ++ in the winsxs folder, but without permission to do so.

  Here's the Setup log:

  = Recording started: 01/03/2012-12:40:11 Build type: SHIP UNICODE 5.00.7600.00 appeal process: C:\Users\SA_KPN~1\AppData\Local\EBZ28334.tmp\Setup.exe =.
  MSI (c) (C0:58) [12:40:11:525]: Resetting cached policy values
  MSI (c) (C0:58) [12:40:11:525]: value of strategy Machine 'Debug' is 0
  MSI (c) (C0:58) [12:40:11:525]: * RunEngine:
  Product: SSO x64\SSO64\SSO64.msi
  Action:
  Command line:
  MSI (c) (C0:58) [12:40:11:525]: Client and UI is none or basic: full installation running on the server.
  MSI (c) (C0:58) [12:40:11:525]: grabbed execution mutex.
  MSI (c) (C0:58) [12:40:11:525]: Cloaking enabled.
  MSI (c) (C0:58) [12:40:11:525]: attempt of activation of all disabled privileges before calling install on server
  MSI (c) (C0:58) [12:40:11:525]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C AC:3) [12:40:11:525]: running the installation inside the multi-package transaction \SSO x64\SSO64\SSO64.msi
  MSI (s) (C AC:3) [12:40:11:525]: grabbed execution mutex.
  MSI (s) (AC:64) [12:40:11:525]: Resetting cached policy values
  MSI (s) (AC:64) [12:40:11:525]: value of strategy Machine 'Debug' is 0
  MSI (s) (AC:64) [12:40:11:525]: * RunEngine:
  Product: SSO x64\SSO64\SSO64.msi
  Action:
  Command line:
  MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (AC:64) [12:40:11:540]: value of strategy Machine 'DisableUserInstalls' is 0
  MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 1
  MSI (s) (AC:64) [12:40:11:540]: SRSetRestorePoint is ignored for this transaction.
  MSI (s) (AC:64) [12:40:11:540]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement: 0
  MSI (s) (AC:64) [12:40:11:540]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3:2
  MSI (s) (AC:64) [12:40:11:571]: file will have the applied safety of OpCode.
  MSI (s) (AC:64) [12:40:11:587]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> 'SSO x64\SSO64\SSO64.msi' against the software restriction policy
  MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi has a digital signature
  MSI (s) (AC:64) [12:40:21:603]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi is allowed to run at the level of authorization 'unlimited '.
  MSI (s) (AC:64) [12:40:21:603]: dialogue of end not activated
  MSI (s) (AC:64) [12:40:21:603]: original ==> SSO x64\SSO64\SSO64.msi packing
  MSI (s) (AC:64) [12:40:21:603]: we're running out of ==> C:\Windows\Installer\1ebf5f91.msi package
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: replacements of compatibility mode properties found.
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (AC:64) [12:40:21:619]: MSCOREE already loaded, using the loaded copy
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'TransformsSecure' is 1
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisablePatch' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'AllowLockdownPatch' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableLUAPatching' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableFlyWeightPatching' is 0
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (AC:64) [12:40:21:619]: transformations are not secure.
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is ' C:\Users\acc\AppData\Local\Setup(030112 124011) .log.
  MSI (s) (AC:64) [12:40:21:619]: command line: ADDLOCAL = froot, server, SSOMMC, Admin, Pwdsync INSTALLDIR = c: Files\Enterprise Single Sign - dans\ FILESINUSEERROR = CURRENTDIRECTORY=C:\Users\acc\AppData\Local\EBZ28334.tmp CLIENTUILEVEL = 3 MSICLIENTUSESEXTERNALUI = 1 CLIENTPROCESSID = 3776
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding PackageCode property. Its value is '{824AA89B-CCCC-4D40-A6D3-71DF21FEE110} '.
  MSI (s) (AC:64) [12:40:21:619]: Product Code passed to Engine.Initialize: "
  MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties before transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
  MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties after transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
  MSI (s) (AC:64) [12:40:21:619]: unregistered product: first start installation
  MSI (s) (AC:64) [12:40:21:619]: product {F89B22BC-2768-4237-B300-5CFA52D9AC84} is not supported.
  MSI (s) (AC:64) [12:40:21:619]: MSI_LUA: invites of credentials not required, the user is an administrator
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding ProductState property. Its value is '-1'. '.
  MSI (s) (AC:64) [12:40:21:619]: entering CMsiConfigurationManager::SetLastUsedSource.
  MSI (s) (AC:64) [12:40:21:634]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (AC:64) [12:40:21:634]: adding new sources is allowed.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding PackagecodeChanging property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: Package name extracted from package path: 'SSO64.msi '.
  MSI (s) (AC:64) [12:40:21:634]: package be registered: "SSO64.msi."
  MSI (s) (AC:64) [12:40:21:634]: Note: 2 1: 2262: AdminProperties 3:-2147287038
  MSI (s) (AC:64) [12:40:21:634]: Machine policy value 'DisableMsi' is 1
  MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'AlwaysInstallElevated' is 0
  MSI (s) (AC:64) [12:40:21:634]: "AlwaysInstallElevated" user policy value is 0
  MSI (s) (AC:64) [12:40:21:634]: product installation will be high because the user is admin, and the product is to be installed by computer.
  MSI (s) (AC:64) [12:40:21:634]: the product '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' is running with elevated privileges: product is affected.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding ADDLOCAL property. Its value is "froot, server, Admin, SSOMMC, Pwdsync.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding INSTALLDIR property. Its value is "C:\Program Files\Common Files\Enterprise Single sign-dans\ '."
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is 'C:\Users\acc\AppData\Local\EBZ28334.tmp '.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '3'.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MSICLIENTUSESEXTERNALUI property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is "3776".
  MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
  MSI (s) (AC:64) [12:40:21:634]: MANAGER of REBOOT: disabled by the property MSIRESTARTMANAGERCONTROL. Windows Installer uses the built-in functionality of FilesInUse.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: TRANSFORMS property is now:
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Favorites
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Network shortcuts
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Documents
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Printer shortcuts
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Recent
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\SendTo
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Templates
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\ProgramData
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Local
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Pictures
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu\Programs\Administrative C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start of Directors
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start start\program
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Desktop
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
  MSI (s) (AC:64) [12:40:21:650]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding USERNAME property. Its value is 'KPN '.
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is 'KPN '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\Windows\Installer\1ebf5f91.msi '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is "SSO x64\SSO64\SSO64.msi.

  ..............................

  ................................

  Property (S): GPTSupport = 1
  Property (S): OLEAdvtSupport = 1
  Property (S): ShellAdvtSupport = 1
  Property (S): MsiAMD64 = 6
  Property (S): Msix64 = 6
  Property (S): Intel = 6
  Property (S): PhysicalMemory = 3840
  Property (S): VirtualMemory = 4312
  Property (S): AdminUser = 1
  Property (S): MsiTrueAdminUser = 1
  Property (S): LogonUser = acc
  Property (S): UserSID = S-1-5-21-1305377269-4159824490-449157577-297538
  Property (S): UserLanguageID = 1033
  Property (S): ComputerName = W1613
  Property (S): SystemLanguageID = 1033
  Property (S): ScreenX = 1024
  Property (S): ScreenY = 768
  Property (S): CaptionHeight = 19
  Property (S): BorderTop = 1
  Property (S): BorderSide = 1
  Property (S): TextHeight = 16
  Property (S): TextInternalLeading = 3
  Property (S): ColorBits = 32
  Property (S): TTCSupport = 1
  Property (S): Time = 12:40:37
  Property (S): Date = 01/03/2012
  Property (S): MsiNetAssemblySupport = 2.0.50727.4927
  Property (S): MsiWin32AssemblySupport = 6.1.7600.16385
  Property (S): RedirectedDllSupport = 2
  Property (S): MsiRunningElevated = 1
  Property (S): The privilege = 1
  Property (S): Name of USER = KPN
  Property (S): COMPANYNAME = KPN
  Property (S): basis of DATA = C:\Windows\Installer\1ebf5f91.msi
  Property (S): OriginalDatabase = SSO x64\SSO64\SSO64.msi
  Property (S): UILevel = 2
  Property (S): MsiUISourceResOnly = 1
  Property (S): Preselected = 1
  Property (S): ACTION = INSTALL
  Property (S): AccountAuthenticatedUsers = authenticated users
  Property (S): AccountCreatorOwner = CREATOR OWNER
  Property (S): AccountPowerUsers = power users
  Property (S): AccountUsers = Users
  Property (S): ROOTDRIVE = D:\
  Property (S): CostingComplete = 1
  Property (S): OutOfDiskSpace = 0
  Property (S): OutOfNoRbDiskSpace = 0
  Property (S): PrimaryVolumeSpaceAvailable = 0
  Property (S): PrimaryVolumeSpaceRequired = 0
  Property (S): PrimaryVolumeSpaceRemaining = 0
  Property (S): INSTALLLEVEL = 1
  Property (S): Complus_XML_Data =

  Property (S): SOURCEDIR = SSO x64\SSO64\
  Property (S): SourcedirProduct = {F89B22BC-2768-4237-B300-5CFA52D9AC84}
  Property (S): ProductToBeRegistered = 1
  MSI (s) (AC:64) [12:40:37:260]: Note: 1: 1708
  MSI (s) (AC:64) [12:40:37:260]: product: Microsoft Enterprise Single Sign-On - the Installation operation failed.

  MSI (s) (AC:64) [12:40:37:275]: Windows Installer installed the product. Product name: Microsoft Enterprise Single Sign-On. Product version: 6.0.0245.0. Product language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.

  MSI (s) (AC:64) [12:40:37:275]: see clean files/packages, if there
  MSI (s) (AC:64) [12:40:37:275]: MainEngineThread returned 1603
  MSI (s) (C AC:3) [12:40:37:275]: sequence number number for this installation system restore.
  = Logging stopped: 01/03/2012 12:40:37 =.
  MSI (s) (C AC:3) [12:40:37:275]: strategy user 'DisableRollback' is 0
  MSI (s) (C AC:3) [12:40:37:275]: policy value 'DisableRollback' Machine is 0
  MSI (s) (C AC:3) [12:40:37:275]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C AC:3) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (C AC:3) [12:40:37:275]: restoration of the environment variables
  MSI (s) (C AC:3) [12:40:37:275]: object to destroy RemoteAPI.
  MSI (s) (C AC:3) [12:40:37:275]: end of thread Custom Action Manager.
  MSI (c) (C0:58) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (c) (C0:58) [12:40:37:275]: MainEngineThread returned 1603
  = Recording stopped: 01/03/2012 12:40:37 =.

  Hello Philippe Gupta.

  Since the question you posted is on a Windows Server 2008-based computer, the question would be better suited on the TechNet support forum. Then I suggest you to post the question on the following link.

  http://social.technet.Microsoft.com/forums/en-us/newThread