Error: An error occurred during reconfiguration.

Similar Questions

• Help required - "error: an error occurred during reconfiguration."

  Hi all

  I get the above error when trying to convert a laptop last night. Anyone know what this means and how I can solve it? I have also included the reference log file.

  Thank you.

  Hello

  some errors in your logs:

  Disc number 1 were ignored due to errors when reading partition table

  GetFirstBootDisk failed, error mntapi: 176

  Based on the volume of cloning has been disabled due to:

  The system volume is not detected.

  BlockLevelVolumeCloneMgr::ReadAndSkipBadBlocks(): error (type: 2, code: 1117) reading 655360 bytes from the source C: volume 0x0000000000bd9000

  BlockLevelVolumeCloneMgr::ReadAndSkipBadBlocks(): error (type 2, code: 1117), detected a bad sector to offset 0x0000000000c04e00 on the volume source C:

  ERROR: library Vmount: 1450 error communication error with driver while

  ERROR: unable to load the registry hive \\.\vstor2-mntapi20-shared-2F9D1DF10000D012000000000E000000\\windows\system32\config\SYSTEM, error 0x3f8.

  Error 0 then call GetVolumeInformation for \\.\vstor2-mntapi20- shared-2F9D1DF10000D012000000000E000000\ FS:<>
  ERROR: library Vmount: error 2 so that it is impossible to open the volume to read-access

  ERROR: Library of Vmount: error 2 Although cannot force disconnect the volume in the pilot
  ERROR: Library of Vmount: error 2 unplug the device volume

  Check if your source file system is not corrupted by chkdsk /f /r

  Check if you have a space on the source and destination.

  Check if account used for the conversion of the local administrator rights.

  Disable User Access Control (UAC), firewall, AV software on the source machine.

  Starting from the journal, you use Windows 7 Professional, 32-bit Service Pack with Quad core CPU and 3 GB of RAM is this correct?

  _________________________________________________________________________________________

  If you have found this device or any other answer useful, please consider to award points. (use the useful or correct)

  Kind regards

  P.

• P2V fails with "error: an error occurred during the reconfiguration.

  Hi, we're starting everything just to P2V of our servers and start easy (I thought) qith our WSUS server. Every time I start the job fails on 98% with the error "error: an error occurred during the reconfiguration. I tried to re-boot, I tried to tell the wizard not to include a disk which is compressed. and I tried making minimal changes to the settings all with the same error...

  I don't know what to try next...

  I have attached the diagnostic logs in the hope that some kind soul can point me in the right direction...

  Thank you very much

  Matt

  Have you tried to remove the/3 GB switch to the boot.ini file?

• Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Try to update via iTunes.

  See you soon,.

  GB

• When I insert my apple ID for FaceTime then show these words (and n error occurred during results. Try again)

  Dear I have a problem in my FaceTime for the e-mail address, of FaceTime also work on cell phone, when I insert my apple for FaceTime ID then show these words (and n error occurred during results. (Try again). Please help me and tell me what is a problem. Thank you

  < re-titled by host >

  See if it might help - If you get an error when you try to activate FaceTime - Apple Support or iMessage

• MacBook: An error occurred during activation. Try again

  HI, I use MBP and this problem has been persistent for more than 5 months now.

  I'm on El Capitan version 10.11.6. I get the message "an error occurred during activation, try again" when I try to Sign In.

  My Internet speed is ok, ok account password. Already connected to iCloud and App Store with the same password. IMessage + Facetime, I am not able to connect.

  Help, please. Thank you

  Using two-step verification or two-factor authentication?  If so, you need passwords for specific app for FaceTime and Messages.

  Passwords using specific app - Apple Support

  If this is not the case, see this article.  It is written for iOS, but if you translate the suggestions in other similar to OS X, it should solve your problem.

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• Unable to sign in imessage: an error occurred during activation. Try again.

  Greetings,

  I just got my board battery and logic changed on the apple store, and since I can not sign in imessage. I get the following error: an error occurred during activation. Try again. I tried to reset the NVRAM, but I still get the error. My internet connection is fine, my e-mail works.

  Thank you for your help.

  Hello

  Open the purpose of this Mac from the Menu of the Apple icon top left point.

  Tab preview is to display the serial number.

  If this is not iMessages will not work (resetting the app just does not this account)

  Return to the repairer and put back it on the logic board (this is supposed to be part of the process)

  If you check it matches what is on your Mac (back, down, or battery compartment)

  If it is 'false' then get his change.

  There is a chance that this has also blocked using Apple ID for iMessages by this computer on the iMessages servers.

  The serial number is used to provide a specific connection of the device.

  IF this does not work after correction or get the serial number to the logic board, you will need to contact the Apple Support (same as Apple Care).

  Once you have explained that it is a matter of Apple ID, he should be free to Fix.  This does not mean that the person of level 1, you talk to knows what to do (they lead script for Apple care issues)

  Ask politely to speak to someone more important.

  Even in this case they may insist on collecting data and hoop jump.

  Based on others who responded that it now gets the engineers involved (the question happens separately the question of the logic board)

  Insist that the server is given regarding the use of your Apple Mac.

  Update or upgrade does not work and neither did a reinstall.

  Even in this case, they can tell you that it could take days for a resetting to filter through.

  

  20:43 Friday. June 10, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• An error occurred during authentication

  I have downloaded I have cloud to my computer and when I try to connect the following message is displayed:

  An error occurred during authentication. Please try again later.

  Just to follow: try again later, perhaps after a reboot. If that's not yet the post.

• An error occurred during the update the firmware. -16

  I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I'm not sure what is the problem...

  Your airport is now not working? That is, the reset did not work.

  OR

  It doesn't have to be upgraded after several attempts?

  The airport is connected to the network as usual? You have full internet access through the airport?

  What model is the most convenient airport?

  The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

  What is the current firmware?

  If it is a very old model, they can sometimes give wrong if it has never been updated.

• Why do I get the message 'a network error occurred during the processing of your order'?  I was able to print an album without problem about a month ago

  I am trying to print a photo book, but get the message "a network error occurred during the processing of your order.  Please check your network connection and try again.  I had no problem with the printing of a book about a month ago.

  Start in Safe Mode, Mac OS x: Safe Mode bootand try to order from there.

  Don't forget to check out the book before ordering this Apple; Get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Apple Support. Save the PDF to be compared with the printed version when coming out.

  

• Full backup impossible. An error occurred during the creation of the backup folder.

  Having had a HARD drive failure and have replaced I have now bought a WD 3 to WD My Book for Mac. Plug and put in place to save. However will not achieve, and gives this error message

  Full backup impossible. An error occurred during the creation of the backup folder.

  Does anyone else have this problem?

  Paul

  How the drive is formatted?

• an error occurred during activation

  I have not found a solution. Help, please.

  Mini iPad, iOS 9.2

  I can connect to the App Store, download applications and update them. When I try to record Messages or face time with my Apple ID, I get the message "an error occurred during activation. Try again. "I am always logged on the App Store with the same ID. What gives?

  I don't have a cellular device.

  I have reset. The reboot.

  I don't have a computer, and it is never linked to iTunes.

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• After download, ' an error occurred during the preparation of the installation.

  Ok.  I'm not very good with computers, so I'm going to do my best here:

  I downloaded El Capitan last night, did the installation and rebooted.  The questions endless gray on the screen.  Relaunched in LANDAU several times; Install still 'stuck' 31 minutes downloading - every time.  Restarted in safe mode; install 'stuck' 24 minutes - every time.  I did the safe mode--> reinstalling OS X, which then made me download 'additional components' and then restarted automatically.  That put me right back to get 'stuck' to 24 minutes Setup.

  I could then go back to my previous OS X 10.7.5 then in safe mode (I don't remember how).  I have so found the OS X 10.11 El Capitan install file in my applications folder, tried running the installer again and got "an error occurred during the preparation of the installation.  Try to run the installation again. "I tried several times over with no different results.  I checked the date in the terminal; It is correct.  So I deleted the application (ten hours later!). Re-uploaded El Capitan on the App Store on the day the next day and just tried to run the installation program and still get "an error occurred during the preparation of the installation.  Try to run the installation again. »

  I do not have a "clean"... installation I didn't really know what it was before all these questions.  All my stuff is backed up via Time Machine on an external hard drive that...

  Any advice would be so appreciated.  I am at a loss at this point.

  Thank you!

  So, everything was OK, two days ago? On Lion OS?

  Of course, there was a hiccup during the installation. you said "makes installation and restarted."

  During the installation (Setup in the applications folder), it restarts after installation, it installs effectively while restarting. So I guess the installation never finished, maybe because you the restarted.

  This means that your operating system 'old' is always on it, but not completely healthy because of the "accidents" caused by ElCapitan failure install.

  So I propose:

  Connect your Time Machine disk (when not connected), start in the RecoveryPartition Time Machine restore, choose a date before that you tried to install ElCapitan, let him finish completely, it restarts automatically (I think). Then you are back where you started.

• Installation of El Capitan problem: "an error occurred during the preparation of the installation. Try running the application again. »

  I've been a fight 2 days now trying to improve my iMac 21.5 2009 end of Mavericks in El Capitan, but as the installation is about to be launched I get this message "an error occurred during the preparation of the installation. Try running the application again".

  Here is a list of all the things I've tried:

  Running the application again;

  Move the installation to another folder application;

  Control date & time and it was already correct;

  Do the installation in safe mode;

  Installation of the upgrade of another user I created only for that purpose;

  The computer restarts and I tried install the upgrade several times;

  And, to be sure that the installation application was not corrupted I made a copy of it on an external HD and tried to install it on my 2011 MacBook Air and it worked (I didn't install because I have El Capitan installed on my MacBook).

  Well, I don't know what else can be done, and I'd rather not have to completely restore my iMac.

  Please try installing again after taking each of these steps you have already taken it.

  Step 1

  Reset the PRAM from your computer.

  Step 2

  If possible, set the clock system as indicated here. If you can only boot into recovery mode, see below.

  In the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history. Load this web page.

  Triple-click anywhere in the line below to select:

  date 0801000014

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. Paste in the window by pressing the command-V key combination.

  Wait for a new line ending with a dollar sign ($) below what you entered. If it does not appear, press return.

  Quit the Terminal to return to the main screen.

  Step 3

  If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine. Do not install more memory to the maximum value specified, even if a seller of RAM, or someone else, said you that it will work.

  Step 4

  Back up the data at least two different storage devices, if you haven't done so already. A backup is not enough to be sure. Backups are possible with Time Machine or disk utility. Preferably both.

  Erase and install OS X. This operation will destroy all the data on the boot volume, if you be better be sure backups.

• An unexpected error occurred during the generation of the Volume License Installer

  I'm building a Volume of NI Developer Suite 2016 DS1 License Installer.  I created the master suite and the installer from the DVD device drivers successfully.

  However, when I try to create tools Xilinx DVD separated issued with the Game Developer on I get the error "an unexpected error occurred during the generation of the Volume License Installer '.

  There is no other information.

  Nobody knows what is this 'unexpected error' and how to work around.

  Just worked it out.  The DVD contains 2 sets of tools; 14.7 & 2014.4.  You must come down with each of them separately, you can't just select the top-level of the DVD folder as you do with all the other discs in the package.  Would be useful if the error to a little more explicit.