On the image in print quality

Similar Questions

• HP deskjet 4515: changing the settings for print quality

  Hi all

  How can I set the print quality of my printer on my macbook to project quality and black color only

  Welcome to the community of HP, @ahmadzamzam 

  Here is an article for you to see which should help you to change the settings for print quality on your Mac. Please be aware of the ads on the article page and not click on them (or just close them).

  MacLife: How to optimize your print settings

  Good luck

• Lightroom 2.5 size of the Image when printing

  I have searched and tried several approaches but can't LR to adjust the size of the image when printing.

  For example, I have a Page of Laboratory Test tif image that has a size of 23 "wide x 29" H paper and resolution 180 dpi.

  I can use CSR 4 Image/Image size to change this in a 8 "W x 10.5" H and a resolution of 320 DPI using resampling. The reduced image prints correctly in CSR 4 on paper 8.5 "x 11" and translates. 25 "top and bottom margins. The same thing happens in LR 2.5 with the reduced size image.

  However, if I try to print the original image using LR 2.5 to automatically resize the image it is malfunctioning. I tried all kinds of combinations of settings so that it can reduce the image (as is done in 4 CSR) and print with. 25 "down the margins without success. The image can not resize correctly.

  Is it a bug, a feature?, or operator error? Can anyone tell how LR 2.5 will resize automatically so it prints correctly? I tested on other computers with the same results.

  Thank you

  Go to the print module.

  Select print to jpg.

  Set the resolution at 180 dpi.

  Other output parameters, sharpening, profile of such paper as required.

  Determine the size of margin according to the needs.

  Set the size of the cell to the size of the image

  Set the Dimensions of the custom paper size... 29 "x 23" in this case.

  You can drag the size of the cells and the edges around until get you exactly the layout on paper, you need. So how successful final print to the file, name the file, and the work is done.

  If you want to print a different size, with different resolution, on paper of different size, with different borders all this can be done in the print module and it is WYSIWYG if no guess work (or calculations) involved. LR rather PS this also has the advantage of use much better algorithms for images of migration than PS and application output sharpening for the specific media type, to which you intend to print, using the RAW data

• Correct sizing of the image for printing

  Good day to all;

  I'm a bit new to all this, so that this question may seem a bit simple.

  Is there a correct way to size for printing photos. That's what I did.

  My camera is set to 6 meg gives me a great original. I want to take advantage of this and print on a 4 x 6.

  I bring to the top of the image, select print > click on 'media adapted size. This gives me the size of

  5.333 X 4.

  I'll return to the selection of the photo: Image > Image size. Under the Document size, I enter 5.333 width. The change of height to 4

  Question, I am doing this correctly

  Thank you all

  Chomp

  Use Image > Image size.

  Set the resolution to 250 (for inkjet) and put in your long size in inches.

  Check "Keep proportion" to avoid any distortion.

  ' Save as... '. "under a new name.

• could not see the image tiff, printed using Microsoft Office Image writer

  My OS is Windows Vista Home Premium.

  I am able to print a document using the printer, but when I print the same document by selecting the Microsoft Office Image writer, I cannot find the image file to the location that I saved. I am able to see the image immediately after printing, but does not after the closing of the window. I am able to see the document I'm trying to attach it to an email in the file to be attached to window, but if I join I get an error message saying that the file is not found at the location. If anyone can help...?

  Ooes that happen with all the tiff images or just a specific document?  It happens with any other type of file?

  If it occurs with a single document and works very well with other tiff files, then I would say that the file is corrupted.  Can you open it directly?  It may be a problem with Office Image Writer, and possibly your e-mail program - but it's not likely if they work with other files, tiff and other file types.

  Maybe the Office has a feature to repair corrupted files.  Also if the problem affects all files tiff and other types of files when you use Image Writer, I suggest that repost you your question in the Forum of the Office to: http://www.microsoft.com/office/community/en-us/flyoutoverview.mspx where the experts at the office will be more than happy to help you with your problem.  You can also find 3rd-party file corruption repair sofware online by searching for what I said just to www.download.com, www.tucows.com, Bing and Google.  If you use Outlook for e-mail, you can after there as well to cover the messaging problem you described.  If you use another e-mail program, answer simply by name.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Help - sizing of the images to print

  I need help because I have really problems.  When I shoot, Nikon D750 and in RAW, once I changed the images, I try to get the size of print 8 x 10, 11 x 14...  But when I go to resize them they do not hold their original appearance.  For example the picture of a car I shot, when I check the size of the image is W = 20.053 and H = 10.55.  Now I would like to print this at 8 x 10 or even 11 x 14, but when I change it to one of these dimensions, then the image is all chewed and looks like a cartoon.  I can't understand this.  What I am doing wrong?

  As in your example of image, it's say to print on paper 10 x 20 or 5 x 10 so reduced.

  5 x 10 will not fit paper 8 x 10 without stretching it. There is no way to this.

  You use the crop tool to decide which part of the image printed on it. Cropping is the best method if you do not want to distort your image.

  I do not know the parameters of your DSLR, but in the future, you can select a longer describes what you want to print, or take the photo at an angle wide enough to eliminate the surroundings without clipping of the object.

  The pdf file that is in the link has other suggestions as well.

  You cannot escape the proportions. The Image and the paper must be a tight fit.

• Position of the image to print

  Before Photoshop Elements 10, when setting up print, I was able to uncheck 'center', and then I could drag the image anywhere I wanted on the printing surface.  Now there is a blue box that does not move and the image is cut by borders if you drag from the Center.  I want to be able to drag the image anywhere I want on the paper and then print, as I used to.  How do I do that?

  Clear the image Centre check box and you should be able to drag the blue box around, but you kind of bug on it on the side to move the box rather than on the picture in the box.

• PS Newb needs help with resizing the image and print several sheet

  Hi, I am using PS CS3 to resize an image, I have so I can print to use as a map for a miniatures game.  I have no problem of scaling of the image to the appropriate size, but I can't understand how to print multiple image 8.5 x 11 sheets.  I thought I saw an option for such a procedure before, but maybe it was in another editing program.  If anyone has any ideas on how I could do this I would really appreciate hearing about them.  Thank you!

  Illustrator and InDesign are tiled printing, like CorelDraw. Photoshop, this title is not, but may be a few script for this. In your case, the simplest solution would be to save the file in PDF format and have Acrobat print a tiled (Page scaling of parameter in Acro print dialog box). You just need to make sure that your page corresponds to several pages. Unliek AI and ID, Acro chop only stuff based on standard paper sizes...

  Mylenium

• How to use text variables and the Image for printing

  I work for several months on the product with AS3 Configurator.
  I am not competent with AS3.
  Now, it seems that perhaps my design is all wrong.
  Is there a good way to do this?

  I have a main scenario that has video clips showing images of different options for the product.
  On the first image, I use buttons to select the choice for option 1 of the Option1_mc.
  Can I store the selection in a variable.
  I use a button to go to the next choice (screen 10.)

  On frame 10, I use buttons to select the choice of option 2 in the Option2_mc.
  It is stored in another variable.

  There are about 10 options that are selected and stored in variables.
  Some are text values and other images taken from video clips Option instances.

  I made a Print_mc to use to printjob.
  I can't get the values of the variables to display the first image for printing.

  Any helpl would be appreciated.

  You are welcome.

  you will not be able to insert a variable into a textfield.  you are going to assign to the text of your TextField property set to one of your points of variables to.

  Thus, for example, if you have:

  var var1:String = 'this is a test ';

  You can use:

  TF. Text = var1;

• Change the images to print

  Is it possible to edit an image for a print version?
  
  My background is dark blue and my image is white, but if I print this nothing will be displayed because its white on white.
  I want to use another image that is dark blue for the print version so that you can see it.
  
  Is this possible with CSS?

  If the image is a foreground image, then you put one in
  a container that is set to display: none and to display: block for printing
  style sheet.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "DC_Eric" wrote in message
  News:es7306$NIH$1@forums. Macromedia.com...
  > Is it possible to edit an image for a print version?
  >
  > My background is dark blue and my image is white, however if I print it
  > nothing will be displayed because its white on white.
  > I want to use a different picture that is dark blue for the printable version as well
  > as you can see.
  >
  > Is it possible with CSS?
  >

• Enlarge/reduce the image for print on HPC309A

  How to enlarge or reduce the size of the image when copying on the HPC309A?

  Thanks for your help,

  TEHACHAP

  Press OK button to turn on the screen if it is in power save mode.  Move the up or down arrow to 'Copy', press OK, press the 'Settings' button then scroll down to 'Size', OK, then scroll upward or down to the appropriate setting.  If you select "Custom", OK, you can use the up and down arrows to select the reduce/enlarge scale factor, then press OK.

• Pro9 Acrobat on Mac suddenly will not print pdf unless I put it on the Image to print.  Downloaded drivers for printer Canon updated and rebooted - same problem.  Problem appeared after update of Adobe, but not sure we - in the last 45 days.

  Acrobat 9 pro, suddenly will not print pdf except for the print image.  Begun in the last 45 days after the update from Adobe.  Have installed drivers for Canon updated and rebooted, but no change.

  If you look at system requirements for Acrobat 9 for Mac, you will see that it is only compatible with Mac OS X v. 10.4.11 or 10.5.

• Control of printing quality of the touchscreen on the MG6320

  Hello, I have a two part question. I am interested in the control of printing quality of the touch screen.

  1. can I set print quality (i.e. - choose Project/fast mode) the touch screen?

  2, if I can and set it there, my choice will apply to all future print jobs until I have change the new setting, or just apply to a print job in the queue in time, etc?

  I hope that my questions are clear. Thanks a lot for your help.

  Hi Ralp51,

  The quality of printing of documents printed from your computer is controlled be the printer driver on the computer.  The quality can be set from the PIXMA MG6320 himself.

• print the image mirror on HP6510 all-in-one

  I can't find the option on my printer dialog box to print a mirror image of an iron on transfer... Can anyone help?

  Hi katmat,

  I see that you want to print images mirrored for iron on transfers, I can help you with this.

  Instead of looking in the dialog box to print to the rear mirror/market implementation, you can see the software application to reverse the image before printing!

  What program you print and what operating system and version? Mac or Windows?

  Here are points of reference for you to review if you wish. You might find something useful. Impression of Mirror Image and Printing T-Shirt transfer; Mirror image.

  I look forward to hear from you.

• PES 9 - unique printing center of the image

  Hi - I'm having a problem with printing some JPEGs in PSE 9.  I actually try to use a virtual "printer" pdf to convert a jpeg file to the pdf format (I'm trying to finally merge multiple JPEG files in a final pdf file if I want to convert JPEG files and use a third-party software to perform the merge).  The jpeg format, I am trying to convert is larger (size wise) so I resized it so that it develops on a normal paper.  However, when I go to 'print', only the center of the image is printed, despite the fact that the preview seems perfect and "Crop to fit" is not checked.  Any ideas?  Thank you!

  Specify the correct paper size in the print dialog box?  Otherwise, I don't know about the problem of sizing.

  You don't have to print to a virtual printer to get a .pdf file.  You can use Save as... and select PDF.

  Jürgen