Help the BSOD with DPM report

Similar Questions

• There are a couple of weeks, I started to meet the BSOD with KERNEL_DATA_INPAGE_ERROR.

  Original title: KERNEL_DATA_INPAGE_ERROR

  Well a few weeks earlier, soon as I bought this new computer, I started to meet the BSOD with KERNEL_DATA_INPAGE_ERROR. I am running Windows 7 on a laptop Asus G60JX. Not long after the first time it happened, I looked at the problem and ran a disk check to find only my computer would start is more upward. I decided to reformat my computer and everything worked well again for about 2 weeks and now it is happening again. My computer starts well but every once in a while the mouse will stop working and it will go to the BSOD and say something on the dumping of physical memory. When I start my computer upward, it says this area solution, or whatever.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 7A
  BCP1: 0000000000000020
  BCP2: FFFFFFFFC000009D
  BCP3: FFFFFA800719E7C8
  BCP4: 0000000000000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\070610-16957-01.dmp
  C:\Users\Spencer\AppData\Local\Temp\WER-58999-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Any help would be appreciated. Thank you.

  You said Details of the bugcheck 0x7a - KERNEL_DATA_INPAGE_ERROR - "this bug check indicates that the data page of the kernel of the required paging file cannot be read in memory."  It is usually an indication of a failing drive.  Error code was met was "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or loose, termination or that the controller does not see the hard drive."

  However, you can check "you receive various Stop in Windows 7 or in Windows Server 2008 R2 error messages when you try to resume a computer that has a large hard drive SATA" and see if the fix applies to you.

• Trend of the industry with ATML report

  We intend to use ATML as standard reports format to proceed, but I haven't heard many people talk about this format more OR. What are the experiences of each with ATML? Advantages and disadvantages? And that companies currently use this standard?

  
  

• I get the bsod with the error of the kernel data inpage error.i seem to get more when im doing a virus scan so I changed my anti-virus software, but I still get the same error.

  I tried a system restore, but that did not work.im using a computer hp laptop with a 2.0core 2 duo on vista Home premium with 2 GB of ram.

  Hello

  It is possible that these are false positives, but I didn't.

  Have you run Malwarebytes, MRT, and UnHackMe gives you all the options? Can you do that in Mode safe?
  Can you get online in Mode safe mode with networking and try online Scans? No tool for a deletion will probably be
  Download them all. You can also try SpyBot and SuperAntiSpyware. There are also other tools on the RootKit
  You can use the list.

  Below must be carried out if necessary AFTER all others above have been tried.

  SpyBot - free
  http://www.safer-networking.org/en/index.html

  If you keep SpyBot you will need to set the SDSB Service Manual and STOPPED and do not use TeaTimer-
  or you can scan with it and then uninstall it.

  SuperAntiSpyware - free
  http://www.SUPERAntiSpyware.com/

  Even here - he has a resident part that can cause some problems so either stop those or uninstall after scanning.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Emails remaining in the Outbox with error report

  When I send an email I get this error... "' some errors occurred while processing the requested task ' but not given details.  The email IS sent. However, appear in the Outbox and it will continue to send over and over again when I go on my email page unless I delete it immediately.  A copy is never going in the sent mail box.  I use outlook.  checking with my porovider and everything works well at their end.  (Road Runner)

  Outlook or Outlook Express?

• Help the BSOD?

  I've been occcasionally get this same BSOD and I was wondering what is the cause and how to fix it. This doesn't happen often, but I would still like to know what is the cause

  Thank you

  Here are the minidump files: click here

  Capsam500

  These related to the eXtensible Host Controller driver xhcdrv.sys of VIA Technologies, Inc.  I remove the current driver and install the latest driver available.

• After installing Photoshop CC 2015, when I run, it appears the BSOD with IRQL_NOT_LESS_OR_EQUAL nvlddmkm.sys message.

  Hello everyone,

  my machine configuration is:

  ASUS N56J

  Intel core I7-4710HQ processor

  8 GB RAM

  NVIDIA GEFORCE GTX850M with the latest version of the pilot aired on May 31, 2015.

  Thank you.

  RIccardo

  Hi Riccardo,

  This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address.

  Recommend to boot the machine in safe mode and then try to run Photoshop.

  Please post on the Adobe Forums.

• Cannot fix the BSOD IRQL_NOT_LESS_OR_EQUAL

  My boyfriend is currently running Vista Ultimate 32-bit. Starting his computer Windows starts as usual and allows me to connect, but after a few charge things, the computer crashes and the famous BSOD on IRQL appears and the computer "stops at the data protection". I can log on and stay connected when I use Safe Mode, but this means that I can't use Windows Update, and the Security Center cannot be activated. I tried to defrag the C drive several times but it is not to make a difference.

  Here are the numbers that I receive on the BSOD:

  STOP: 0X0000000A (0X00000002, 0X00000001, 0X00000000, 0X8283483C)

  Then it performs a physical memory dump.

  The other day I removed a worm called 'Security Protection' of his C drive and I installed Spybot, AdAware, then. I had to uninstall AdAware and avast! in its place. Today, I reversed everything is avast! and Spybot and I then uninstalled them such as suggested by the Microsoft Support site. Windows has improved slightly by giving a work constantly starting. But due to the IRQL error, as I said, only Safe Mode works correctly.

  On this computer, there is no startup repair. There is no [which is pretty frustrating] system restore point, and I don't want to try to update its drivers because there is so much and I don't know what they are doing. I tried using F8 to switch to Debug Mode, but that freezes the computer to the logo screen and I have to restart his computer physically. I looked in the event viewer and there are a lot of messages and they don't make sense to me. Problems and Solutions in Control Panel reports no errors.

  There is no disk Vista and is not ready to lose all its data.

  I saw this error message on his computer before but I just restarted the computer, and the message does not return. Now, this does not block. I couldn't find anything on the Support site that solves this problem and I don't want to download a fix because it is said that IF the fix that I have chosen is incorrect, it could cause damage to the system. I tried to use the Contact feature, but he told me that the ID of the product on his computer has expired.

  I'm at the end of my intelligence, I have tried everything I can think of to fix this, I have read several websites and articles and nothing works.

  In safe mode, you can configure the computer to "clean boot" and then see if you can start the computer in "Normal" mode - follow step 1 only to the boot:

  http://support.Microsoft.com/kb/929135

  In addition, it can help to look at the files the BSOD with a debugger minidump.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time

  If you are unable to start the computer in Normal Mode, you can access the minidump in Mode safe files.

• Satellite L350 - BSOD with new modules of RAM

  Hi, I have a Toshiba Satellite L350, it helps to have a memory of 2 GB 2 x 1 GB (PC2 5300 s)
  Now I bought 2x2gb (PC2 5300 s) to get a 4 GB and installed them both, but when I turn on my laptop I get the BSOD with Driver_IRQL_Not_LEss_OR_EQUAL error with ataport.sys

  Address 814A2AE1
  81499000 base
  datestamp 49ee8a3a

  Running Windows 7
  The two 2 GB cards memory sticks works fine individually but

  Any help would be welcome. Thank you

  Hi mate,

  What new RAM modules that you have bought exactly? For the moment, I think that they are not compatible together and so the BSOD appears. I think you have to use other RAM modules if want 4 GB of RAM.

  Also if you run a memory diagnostic tool like Memtest86 doesn't it displays an error if you use the new modules?

• For the BSOD driver power state failure.

  Like many others, I get the BSOD with Driver_Power_State_Failure.
  Reading various posts, it appeared that everyone could have another driver, the origin of the problem.
  The dump file has been loaded on skydrive at the location below.
  Help, please
  https://SkyDrive.live.com/redir?RESID=50EB9757F9452499! 135 & authkey =! AKdF8YjyqFFbxdU

  This phenomenon was related to enumerator umbus.sys of Bus Mode user of Microsoft Corporation.  A simple upgrade to sp - 1 should solve the problem

  Run (SURT) system update readiness tool and then update to Service Pack 1

  32 bit

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3132

  64 bit

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=20858

  Now updated for Service Pack 1

  http://Windows.Microsoft.com/installwindows7sp1

  This is the final build number of Windows 7:

  6.1.7601.17514

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  Additional resources:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
  http://Windows.Microsoft.com/troubleshootwindows7sp1

• Driver power state failure - cannot determine the issue with the driver

  I had this problem for a long time, since the upgrade to Windows 8 beta, did not happen on Windows 7. WIN8 (clean install), 8.1 and 10 technical preview all do the same thing. I get the BSOD with a message about the failure of State driver, and my system restarts. It happens a few times a day. I noticed a few times, my devices Sata work stop shortly before the accident, sometimes apps are block just before, but not always. No index than that. Help, please! TIA!

  Empty the file: https://onedrive.live.com/redir?resid=984652FADD494F38%21315502

  ZARNet

  This phenomenon was related to the storage IDE ataport.sys driver.  I also notice that you have a 2009 jriad.sys driver.  I remove the 2009 driver and perform an audit to systemf on BONE Island, but it can be associated with HD and not driver related, which would explain why it happened in all OS' are

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• BSOD with Memory_Management error when connecting hard drive external

  I have an ASUS all-in-one about a year with Windows 8.  About a week ago, I got the BSOD with error Memory_Management and OS was never able to recover.  After trying several system restores with no luck, I unplugged my external hard drive, and the operating system booted up normal.  I checked the hard drive on another computer and it worked fine.  I tried another external hard drive on my ASUS and as soon as the operating system detected it, I got the BSOD again.  I tried other USB ports with the external hard drive and the same result.  I tried a USB stick in the USB ports and it worked fine.  Need help please I can save is no longer my files.

  It is a very strange problem if associated USB devices work, but the HARD drive is not. Have you checked for a firmware update for the manufacturer HARD drive + assured your USB drivers on the computer, it blocks are perfectly up-to-date on the site of the manufacturer (not Windows Update or Device Manager)?

  Kind regards

  Patrick

• How do you change the configuration of the drive in the bios with the master and slave?

  When I bought my Dell Dimension 8300 several years ago, I had installed a DVD player and a CD + RW drive and a floppy drive installed in the system.  Very early the system crashed and the OS discs had to be reinstalled.  The Tech is frustrated and accompanied me by changing the master/slave in the bios.  My DVD player is now the master and my CD + RW is now slave.  My cd burner and DVD player play, but they do not burn or import music.  I was wondering if the fact of change that might help the problem with the stopping cd burner just in the middle of a burn error 4450 or ((0X00001162).)  Thanks for your help.

  Hello
  If you are referring to the sequence of boot Yes the bios is where you want to change it see this url http://helpdeskgeek.com/how-to/change-boot-order-xp-vista/ ... . If you are referring to master vs. slave then that is something else see this url http://www.scribd.com/doc/96827/Master-Slave-Configuration access http://support.microsoft.com/default.aspx/kb/283658 Device Manager and check for the x red or yellow?
  itunes error code points? is this correct
  I do not think that it will make a difference to change the devices around, but there's enough information here to know what to do....
  I don't think that changing the order of stertup is going to fix this problem, but again once there is info here to address this issue...
  I would however check the device mgr if there are brands so you can set from the Device Manager and there is news for this
  I think that your problems stem from itunes, if that's the case, it would be best to see if this is the case, however, if the case is you are using windows media player let us know if this post can help solve your problem, please click the mark as answer check on this page THANKS AND GOOD LUCK

• BSOD with igdkmd64.sys error

  Hello

  I am running windows 7 pro sp1 64 on a lenovo w520. I get the bsod with an igdkmd64.sys one or two times a day. I run the memory test on my computer, which is very good. and have updated all the software and drivers for windows and lenovo. someone has had experience with a solution to this. the computer crashes generally when working on graphics programs, creative suite or modo.
  any info would be extremely useful. Thank you!
  Joe

  Hello

  the igdkmd64.sys file could be the driver Intel Graphics. Have you tried to download the drivers directly from the Intel web site? If this is not the case, try using this link:

  http://www.Intel.com/p/en_US/support/detect

  LC

• How to add a BUTTON in the form of a report in report Page last column

  Hi friends,
  
  I created a form with Page report. Now, I want to ADD a button in the last column named Add in the last column of the Report.that would be a new column added to the report.
  
  How can I add a button to the form with Page report in the report and tell me how PK as ORDER_ID of a particular LINE with this button to add a reference ELEMENT.
  When I click on the button Add ELEMENT, then command to go to the next Page with ORDER_ID.
  
  
  How can I do that.
  
  
  Thank you

  Hello

  Modify your report and click the report attributes. On the right under 'Tasks' is "Add the link in the column" - click that. This creates a new column. Scroll down to the links section of this new column and add in the following:

  Link text: Add article
  Target: Page in the present application
  Page: (enter the number of the form page)
  Clear the Cache: (enter the number of the form page)
  Point 1 (name): (enter or select the name of the element of the form for the primary key page - for example, P2_ORDER_ID)
  Point 1 (value): (enter or select #ORDER_ID #-which should be the ORDER_ID column on the table for the report)

  Click on apply changes to save and run the report

  This creates a normal hyperlink in the column - each line will have a different value of ORDER_ID, so every link will be slightly different. If you want to make the link look like a button, you can do it with style if necessary

  Andy