Help to configure Cisco VPN configuration

Hi guys,.

I need help in the configuration of the VPN from Cisco IOS. Basically, we have 2 routers of cisco 1811 in our society.

  1. Router 1 - router (IP 192.168.x.254) of Production
  2. Router 2 - router VPN (IP 192.168.x.251).

All computers/servers within our network has been configured with a default 192.168.x.254 gateway. Therefore, all internet traffic through the router to the production.

Now, we want to deploy a new router (Router 2) which will be used only for purpose VPN (for example, DMVPN, IPsec site-to-site, configuration of the client VPN etc.).

I have configured the router with Cisco VPN client 2 and can connect to this by using client applications VPN from my pc at home. However, once I connect to it, I'm not able to ping anything inside this network other than the IP Address of Router 2 (192.168.x.251).

Is there something else I need to put in the configuration, so that I can ping everything inside the network?

Any help would be greatly appreciated.

Kind regards

Vignesh.

Vignesh salvation,

I assume that you have created a new pool of vpn for remote access on Router 2 clients?

If so, you will need to have a route static (for the range of pool VPN) on Router 1 to Router 2.

I would like to know how you...

Please rate this post if helpful.

Tags: Cisco Security

Similar Questions

  • Configuration of Cisco for Cisco VPN Client ASA 5505

    Our firm has finally made the move from Sonicwall Cisco for our SMB customers. Got our first customer with a VPN site-to site solid and you have configured the main router for connections via the Cisco VPN Client VPN Wizard.

    When I install the VPN Client on desktop computers that does not capture all the necessary options (unless you have a SSL VPN). I guess that there is a process that I am missing to export a connection profile that Cisco VPN Client users can import for their connection.

    There step by step guides to create the connection profile file to distribute to customers?

    Hello

    The ASDM wizard is for the configuration on the SAA. This wizard will help you complete the VPN configuration on the end of the ASA.

    You will need to set the same in the client, so that they can negotiate and connect.

    Input connection in the client field, that's what you want to be seen that on the VPN client - it can be any name

    Host will be the external ip address of the ASA.

    Group options:

    name - same tunnel as defined on the ASA group
    Password - pre-shared as on ASA.

    Confirm password - same pre-shared key.

    Once this is over, you will see the customer having an entry same as a login entry. You must click on connect there. He will be a guest user and the password. Please enter the login crendentials. VPN connects.

    You can distribute the .pcf file that is formed at the place mentioned in the post above. Once the other client receive the .pcf, they need to import it by clicking this tab on the VPN client.

    Kind regards

    Anisha

  • Another problem with the configuration of Cisco VPN Client access VPN Site2site

    We have a Cisco ASA 5505 at our CORP. branch I configured the VPN Site2Site to our COLO with a Juniper SRX220h, to another site works well, but when users access the home Cisco VPN client, they cannot ping or SSH through the Site2Site.  JTACS contacted and they said it is not on their end, so I tried to contact Cisco TAC, no support.  So here I am today, after for the 3 days (including Friday of last week) of searching the Internet for more than 6 hours per day and try different examples of other users. NO LUCK. The VPN client shows the route secure 10.1.0.0

    Sorry to post this, but I'm frustrated and boss breathing down my neck to complete it.

    CORP netowrk 192.168.1.0

    IP VPN 192.168.12.0 pool

    Colo 10.1.0.0 internal ip address

    Also, here's an example of my config ASA

    : Saved

    :

    ASA Version 8.2 (1)

    !

    hostname lwchsasa

    names of

    name 10.1.0.1 colo

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 192.168.1.1 255.255.255.0

    !

    interface Vlan2

    backup interface Vlan12

    nameif outside_pri

    security-level 0

    IP 64.20.30.170 255.255.255.248

    !

    interface Vlan12

    nameif backup

    security-level 0

    IP 173.165.159.241 255.255.255.248

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    switchport access vlan 12

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    passive FTP mode

    permit same-security-traffic inter-interface

    permit same-security-traffic intra-interface

    object-group network NY

    object-network 192.168.100.0 255.255.255.0

    BSRO-3387 tcp service object-group

    port-object eq 3387

    BSRO-3388 tcp service object-group

    port-object eq 3388

    BSRO-3389 tcp service object-group

    EQ port 3389 object

    object-group service tcp OpenAtrium

    port-object eq 8100

    object-group service Proxy tcp

    port-object eq 982

    VOIP10K - 20K udp service object-group

    10000 20000 object-port Beach

    the clientvpn object-group network

    object-network 192.168.12.0 255.255.255.0

    APEX-SSL tcp service object-group

    Description of Apex Dashboard Service

    port-object eq 8586

    object-group network CHS-Colo

    object-network 10.1.0.0 255.255.255.0

    the DM_INLINE_NETWORK_1 object-group network

    object-network 192.168.1.0 255.255.255.0

    host of the object-Network 64.20.30.170

    object-group service DM_INLINE_SERVICE_1

    the purpose of the ip service

    ICMP service object

    service-object icmp traceroute

    the purpose of the service tcp - udp eq www

    the tcp eq ftp service object

    the purpose of the tcp eq ftp service - data

    the eq sqlnet tcp service object

    EQ-ssh tcp service object

    the purpose of the service udp eq www

    the eq tftp udp service object

    object-group service DM_INLINE_SERVICE_2

    the purpose of the ip service

    ICMP service object

    EQ-ssh tcp service object

    inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 clientvpn object-group

    inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY

    inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

    inside_nat0_outbound list of allowed ip extended access any 192.168.12.0 255.255.255.0

    outside_pri_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY

    outside_pri_access_in list extended access permit tcp any interface outside_pri eq www

    outside_pri_access_in list extended access permit tcp any outside_pri eq https interface

    outside_pri_access_in list extended access permit tcp any interface outside_pri eq 8100

    outside_pri_access_in list extended access permit tcp any outside_pri eq idle ssh interface

    outside_pri_access_in list extended access permit icmp any any echo response

    outside_pri_access_in list extended access permit icmp any any source-quench

    outside_pri_access_in list extended access allow all unreachable icmp

    outside_pri_access_in list extended access permit icmp any one time exceed

    outside_pri_access_in list extended access permit tcp any 64.20.30.168 255.255.255.248 eq 8586

    levelwingVPN_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0

    levelwingVPN_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.255.0

    outside_pri_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

    backup_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_1 192.168.12.0 ip 255.255.255.0

    outside_pri_cryptomap_1 list extended access allow DM_INLINE_SERVICE_2 of object-group 192.168.1.0 255.255.255.0 10.1.0.0 255.255.255.0

    outside_19_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0

    inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

    VPN-Corp-Colo extended access list permits object-group DM_INLINE_SERVICE_1 192.168.12.0 255.255.255.0 10.1.0.0 255.255.255.0

    Note to OUTSIDE-NAT0 NAT0 customer VPN remote site access-list

    OUTSIDE-NAT0 192.168.12.0 ip extended access list allow 255.255.255.0 10.1.0.0 255.255.255.0

    L2LVPN to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0

    pager lines 24

    Enable logging

    debug logging in buffered memory

    exploitation forest asdm warnings

    record of the rate-limit unlimited level 4

    destination of exports flow inside 192.168.1.1 2055

    timeout-rate flow-export model 1

    Within 1500 MTU

    outside_pri MTU 1500

    backup of MTU 1500

    local pool LVCHSVPN 192.168.12.100 - 192.168.12.254 255.255.255.0 IP mask

    no failover

    ICMP unreachable rate-limit 100 burst-size 5

    ICMP allow any inside

    ICMP allow any outside_pri

    don't allow no asdm history

    ARP timeout 14400

    NAT-control

    interface of global (outside_pri) 1

    Global 1 interface (backup)

    NAT (inside) 0-list of access inside_nat0_outbound

    NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access

    NAT (inside) 1 0.0.0.0 0.0.0.0

    NAT (outside_pri) 0-list of access OUTSIDE-NAT0

    backup_nat0_outbound (backup) NAT 0 access list

    static TCP (inside outside_pri) interface https 192.168.1.45 https netmask 255.255.255.255 dns

    static TCP (inside outside_pri) interface 192.168.1.45 www www netmask 255.255.255.255 dns

    static TCP (inside outside_pri) interface 8586 192.168.1.45 8586 netmask 255.255.255.255 dns

    static (inside, inside) tcp interface 8100 192.168.1.45 8100 netmask 255.255.255.255 dns

    Access-group outside_pri_access_in in the outside_pri interface

    Route 0.0.0.0 outside_pri 0.0.0.0 64.20.30.169 1 track 1

    Backup route 0.0.0.0 0.0.0.0 173.165.159.246 254

    Timeout xlate 03:00

    Conn Timeout 0:00:00 half-closed 0:30:00 udp icmp from 01:00 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 01:00 uauth uauth absolute inactivity from 01:00

    timeout tcp-proxy-reassembly 0:01:00

    dynamic-access-policy-registration DfltAccessPolicy

    AAA authentication enable LOCAL console

    AAA authentication http LOCAL console

    the ssh LOCAL console AAA authentication

    http server enable 981

    http 192.168.1.0 255.255.255.0 inside

    http 0.0.0.0 0.0.0.0 outside_pri

    http 0.0.0.0 0.0.0.0 backup

    SNMP server group Authentication_Only v3 auth

    SNMP-server host inside 192.168.1.47 survey community lwmedia version 2 c

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Sysopt connection tcpmss 1200

    monitor SLA 123

    type echo protocol ipIcmpEcho 216.59.44.220 interface outside_pri

    Annex ALS life monitor 123 to always start-time now

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set esp-3des-sha1 esp-3des esp-sha-hmac

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    Crypto ipsec df - bit clear-df outside_pri

    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    card crypto outside_pri_map 1 match address outside_pri_1_cryptomap

    card crypto outside_pri_map 1 set pfs

    peer set card crypto outside_pri_map 1 50.75.217.246

    card crypto outside_pri_map 1 set of transformation-ESP-AES-256-MD5

    card crypto outside_pri_map 2 match address outside_pri_cryptomap

    peer set card crypto outside_pri_map 2 216.59.44.220

    card crypto outside_pri_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    86400 seconds, duration of life card crypto outside_pri_map 2 set security-association

    card crypto outside_pri_map 3 match address outside_pri_cryptomap_1

    peer set card crypto outside_pri_map 3 216.59.44.220

    outside_pri_map crypto map 3 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    outside_pri_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

    card crypto outside_pri_map interface outside_pri

    crypto isakmp identity address

    ISAKMP crypto enable outside_pri

    crypto ISAKMP policy 5

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 10

    preshared authentication

    the Encryption

    sha hash

    Group 2

    life 86400

    crypto ISAKMP policy 30

    preshared authentication

    aes-256 encryption

    md5 hash

    Group 2

    life 86400

    crypto ISAKMP policy 50

    preshared authentication

    aes encryption

    md5 hash

    Group 2

    life 86400

    !

    track 1 rtr 123 accessibility

    Telnet timeout 5

    SSH 192.168.1.0 255.255.255.0 inside

    SSH timeout 5

    Console timeout 0

    management-access inside

    dhcpd auto_config outside_pri

    !

    dhcpd address 192.168.1.51 - 192.168.1.245 inside

    dhcpd dns 8.8.8.8 8.8.4.4 interface inside

    rental contract interface 86400 dhcpd inside

    dhcpd field LM inside interface

    dhcpd allow inside

    !

    a basic threat threat detection

    statistical threat detection port

    Statistical threat detection Protocol

    Statistics-list of access threat detection

    a statistical threat detection host number rate 2

    no statistical threat detection tcp-interception

    WebVPN

    port 980

    allow inside

    Select outside_pri

    enable SVC

    attributes of Group Policy DfltGrpPolicy

    VPN-idle-timeout no

    Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

    internal GroupPolicy2 group strategy

    attributes of Group Policy GroupPolicy2

    Protocol-tunnel-VPN IPSec svc

    internal levelwingVPN group policy

    attributes of the strategy of group levelwingVPN

    Protocol-tunnel-VPN IPSec svc webvpn

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list levelwingVPN_splitTunnelAcl

    username password encrypted Z74.JN3DGMNlP0H2 privilege 0 aard

    aard attribute username

    VPN-group-policy levelwingVPN

    type of remote access service

    rcossentino 4UpCXRA6T2ysRRdE encrypted password username

    username rcossentino attributes

    VPN-group-policy levelwingVPN

    type of remote access service

    bcherok evwBWqKKwrlABAUp encrypted password username

    username bcherok attributes

    VPN-group-policy levelwingVPN

    type of remote access service

    rscott nIOnWcZCACUWjgaP encrypted password privilege 0 username

    rscott username attributes

    VPN-group-policy levelwingVPN

    sryan 47u/nJvfm6kprQDs password encrypted username

    sryan username attributes

    VPN-group-policy levelwingVPN

    type of nas-prompt service

    username, password cbruch a8R5NwL5Cz/LFzRm encrypted privilege 0

    username cbruch attributes

    VPN-group-policy levelwingVPN

    type of remote access service

    apellegrino yy2aM21dV/11h7fR password encrypted username

    username apellegrino attributes

    VPN-group-policy levelwingVPN

    type of remote access service

    username rtuttle encrypted password privilege 0 79ROD7fRw5C4.l5

    username rtuttle attributes

    VPN-group-policy levelwingVPN

    username privilege 15 encrypted password vJFHerTwBy8dRiyW levelwingadmin

    username password nbrothers Amjc/rm5PYhoysB5 encrypted privilege 0

    username nbrothers attributes

    VPN-group-policy levelwingVPN

    clong z.yb0Oc09oP3/mXV encrypted password username

    clong attributes username

    VPN-group-policy levelwingVPN

    type of remote access service

    username, password finance 9TxE6jWN/Di4eZ8w encrypted privilege 0

    username attributes finance

    VPN-group-policy levelwingVPN

    Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

    type of remote access service

    IPSec-attributes tunnel-group DefaultL2LGroup

    Disable ISAKMP keepalive

    tunnel-group 50.75.217.246 type ipsec-l2l

    IPSec-attributes tunnel-group 50.75.217.246

    pre-shared-key *.

    Disable ISAKMP keepalive

    type tunnel-group levelwingVPN remote access

    tunnel-group levelwingVPN General-attributes

    address LVCHSVPN pool

    Group Policy - by default-levelwingVPN

    levelwingVPN group of tunnel ipsec-attributes

    pre-shared-key *.

    tunnel-group 216.59.44.221 type ipsec-l2l

    IPSec-attributes tunnel-group 216.59.44.221

    pre-shared-key *.

    tunnel-group 216.59.44.220 type ipsec-l2l

    IPSec-attributes tunnel-group 216.59.44.220

    pre-shared-key *.

    Disable ISAKMP keepalive

    !

    !

    !

    Policy-map global_policy

    !

    context of prompt hostname

    Cryptochecksum:ed7f4451c98151b759d24a7d4387935b

    : end

    Hello

    It seems to me that you've covered most of the things.

    You however not "said" Configuring VPN L2L that traffic between the pool of VPN and network camp should be in tunnel

    outside_pri_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 object-group CHS-Colo

    Although naturally the remote end must also the corresponding configurations for users of VPN clients be able to pass traffic to the site of the camp.

    -Jouni

  • Configuration of CISCO VPN (WRVS4400N) router

    Dear,

    Please help me to setup VPN connection,

    Headquarters: firewall fortigate-200B - SSL, IPsec

    Branch: WRVS4400N Wireless-N Gigabit Security Router with VPN

    The two sides have the public IP address

    Wrong forum, post in the 'small business routers. You can move your ad using the Panel on the right actions.

  • Help: Customer Cisco VPN & Split Tunnel but not Internet

    Hi Forum.

    We are faced with this problem: after having successfully open a VPN connection with the Cisco VPN Client to a router Cisco, the rest of the world are not properly available more.

    This is what has been verified / so far attempted to identify the problem on a Windows Vista computer:

    -Router: Split Tunneling is allowed according to sysop

    -On the VPN-Client: "allow Local Lan access" is checked

    -On the Client (statistics): only STI VPN-rout configured listed unter "guarantee routes." "Local Lan routes" is empty.

    -Calling 'http://www.google.com' in IE fails

    -Call ' 74.125.232.116' (IE IP) IE works / ping the IP works.

    -nslookup properly lists the current DNS server

    -nslookup www.google.com resolves correctly the name of intellectual property

    It seems that it is not that the connection with the rest of the Internet is deleted, but DNS resolution fails somehow, even though all signs point to the appropriate DNS server is in force and although the command line can resolve the name.

    does anyone have a tip how to debug this correctly?

    No worries Pat...

    Sent by Cisco Support technique iPhone App

    -Please evaluate solutions

  • I need help for configuring security for my wireless again.

    Need a help for my Wi - Fi Protected Access set up again... somehow I deleted it while trying to access the networks wireless outside my house.

    original title: Wi - Fi Protected Access

    Hi dmcangus,

    See the Microsoft articles below for more information on WPA wireless security.

    Configure Security Wireless WPA for home networks

    http://Windows.Microsoft.com/en-us/Windows-XP/help/networking/configure-WPA-wireless-security

    Overview of upgrading security Wi - Fi Protected Access (WPA) in Windows XP

    http://support.Microsoft.com/kb/815485

  • Help, please! Microsoft Vs Cisco VPN Client VPN

    Could someone please indicate if the Cisco VPN Client is safer than the VPN integrated Microsoft on windows XP? If the Cisco client is more secure than why? Microsoft it does not use IPSEC and PPTP right?

    Please advise - very urgent!

    I don't know a customer Cisco Cisco VPN concentrator is safer, but I'm not sure exactly why.

    Carlton,

    Take a deeper look at the same time, all your questions will be answered once you look at these links.

    IPSec is a Cisco VPN standard, open customer or any customer VPN IPSec based should meet these standards. You'll learn more by reading these few bellow of links at the end of the reading you will be to have a better

    perspective on the customer you would gear more to use as a professional network.

    Personally, I've been away little by little PPTP and substituting Cisco VPN clients. Don't get me wrong, PPTP is still widely used there, but it is more vulnerable.

    With Ipsec VPN, you have a wider choice of authentication algorithms, to base

    granularity of ciphers as a way to implement a secure VPN extreamely for RA architecture

    Introduction to IPsec

    http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_tech_note09186a0080094203.shtml

    Introduction to PPTP/L2TP

    http://www.Clavister.com/manuals/ver8.6x/manual/VPN/pptp_basics.htm

    Analysis of vulnerabilities and implementation MS PPTP

    http://www.Schneier.com/paper-PPTP.html

    http://www.Schneier.com/paper-PPTP.PDF

    Alternative workaround to use client MS using L2TP over Ipsec

    http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00807213a7.shtml

    In addition, you can do a google search on "hacking PPTP" or "Ipsec" to preview more vulnerabilities.

    Rgds

    Jorge

  • Unable to connect to the Cisco VPN you use native client: El Capitan

    I'm unable to connect to the Cisco VPN using native client server Cisco OSX via IPSec. Before the upgrade for connections VPN El Capitan has worked without any problems. VPN uses the shared secret of group. It seems, I get the error "raccoon [2580] ': could not send message vpn_control: Broken pipe ' during the connection."

    When I upgraded to El Capitan, VPN connection has stopped working. I tried to do the following:

    * connect using the old work VPN connection: without success

    Config: Hand [server address, account name],

    AUTH settings [shared secret, the Group name].

    Advanced [mode to use the passive FTP = TRUE]

    errors:

    "authd [124]: copy_rights: _server_authorize failed.

    "raccoon [2580]: could not send message vpn_control: Broken pipe"

    ...

    * Add new VPN connection using L2TP over IPSec: without success

    Config: Hand [server address, account name],

    Authentication settings [user authentication: password, identification of the Machine: Shared Secret].

    Advanced [send all traffic on the VPN = TRUE]

    errsors:

    "pppd [2616]: password not found in the system keychain.

    "authd [124]: copy_rights: _server_authorize failed.

    ...


    * Add new connection using Cisco via IPSec VPN: without success

    Main config: [server address, account name].

    AUTH settings [shared secret, the Group name].

    Advanced [mode to use the passive FTP = TRUE]

    errors:

    "authd [124]: copy_rights: _server_authorize failed.

    "raccoon [2580]: could not send message vpn_control: Broken pipe"

    VPN server is high and does not work and accepts connections, this problem is entirely on the client side.

    I. Journal of Console app existing/Legacy VPN connection:

    26/03/16 10:24:01, 000 syslogd [40]: sender ASL statistics

    26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: received an order to start SystemUIServer [2346]

    26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: changed to connecting status

    26/03/16 10:24:01, nesessionmanager 313 [2112]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, 316 nesessionmanager [2112]: phase 1 of the IPSec from.

    26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

    26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

    26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 339 [2580]: connection.

    26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, racoon 349 [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

    26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

    26/03/16 10:24:01, nesessionmanager 404 [2112]: phase 1 of the IPSec from.

    26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 405 [2580]: connection.

    26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, 407 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

    26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

    26/03/16 10:24:01, 463 raccoon [2580]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

    26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

    26/03/16 10:24:01, 463 raccoon [2580]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

    26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

    26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

    26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

    26/03/16 10:24:01, nesessionmanager 485 [2112]: IPSec asking extended authentication.

    [26/03/16 10:24:01, 494 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed by disconnecting

    26/03/16 10:24:01, 495 nesessionmanager [2112]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 495 [2580]: IKE Packet: forward the success. (Information message).

    26/03/16 10:24:01, racoon 495 [2580]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

    26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

    26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

    [26/03/16 10:24:01, 496 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed to offline, last stop reason no

    26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    $VPN_SERVER_IP

    II. new VPN connection using L2TP over IPSec Console app log:

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetFillColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetStrokeColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextFillRects: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontAntialiasingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveTrackingHandler:-1856

    26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveReceiveHandler:-1856

    26/03/16 10:37:28, com.apple.xpc.launchd [1 393]: (com.apple.SystemUIServer.agent [2346]) Service was released due to the signal: Broken pipe: 13

    26/03/16 10:37:28, Spotlight 461 [459]: spot: logging agent

    26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

    26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

    26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: received an order to start com.apple.preference.network.re [2539]

    26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: changed to connecting status

    26/03/16 10:37:28, com.apple.SecurityServer [75 536]: rules of problem opening the file "/ etc/authorization ': no such file or directory

    26/03/16 10:37:28, com.apple.SecurityServer [75 536]: sandbox has denied authorizing the right "system.keychain.modify" customer "/ usr/libexec/nehelper" [184]

    26/03/16 10:37:28, 536 pppd [2616]: NetworkExtension is the controller

    26/03/16 10:37:28, 538 pppd [2616]: NetworkExtension is the controller

    26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: cannot copy content, returned SecKeychainItemCopyContent user interaction is not allowed.

    26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: SecKeychainItemFreeContent returned the user interaction is not allowed.

    26/03/16 10:37:28, 570 pppd [2616]: password not found in the system keychain

    26/03/16 10:37:28, 572 pppd [2616]: publish_entry SCDSet() failed: success!

    26/03/16 10:37:28, 573 pppd [2616]: publish_entry SCDSet() failed: success!

    26/03/16 10:37:28, 573 pppd [2616]: pppd 2.4.2 (Apple version 809.40.5) started by $VPN_SERVER_USER, uid 501

    26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceConnectedCallback

    26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceDisconnectedCallback

    26/03/16 10:37:28, authd 720 [124]: copy_rights: _server_authorize failed

    26/03/16 10:37:28, sandboxd 748 [120]: nehelper (184) ([184]) refuse the authorization-right-get system.keychain.modify

    III. New connection of Cisco VPN through IPSec Console app log:

    26/03/16 10:18:26, 917 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

    26/03/16 10:19:43, 975 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

    [26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: received an order to start SystemUIServer [2346]

    [26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: changed to connecting status

    26/03/16 10:19:56, nesessionmanager 267 [2112]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, nesessionmanager 270 [2112]: phase 1 of the IPSec from.

    26/03/16 10:19:56, authd 284 [124]: copy_rights: _server_authorize failed

    26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

    26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

    26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 296 [2576]: connection.

    26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, racoon 308 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:19:56, nesessionmanager 352 [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

    26/03/16 10:19:56, nesessionmanager 353 [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

    26/03/16 10:19:56, nesessionmanager 373 [2112]: phase 1 of the IPSec from.

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, 374 raccoon [2576]: connection.

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, racoon 376 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

    26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

    26/03/16 10:19:56, racoon 432 [2576]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

    26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

    26/03/16 10:19:56, racoon 432 [2576]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

    26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

    26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

    26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

    26/03/16 10:19:56, 454 nesessionmanager [2112]: IPSec asking extended authentication.

    [26/03/16 10:19:56, nesessionmanager 464 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed by disconnecting

    26/03/16 10:19:56, nesessionmanager 464 [2112]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 465 [2576]: IKE Packet: forward the success. (Information message).

    26/03/16 10:19:56, racoon 465 [2576]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

    26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

    26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

    [26/03/16 10:19:56, nesessionmanager 465 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed to offline, last stop reason no

    26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    It seems that I solved the problem, but I'm not sure it helped.

    After restart of the operating system, the two connections: old and new Cisco via IPSec connection, began to work.

  • Problems to connect via the Cisco VPN client IPSec of for RV180W small business router

    Hello

    I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [34360] has no config mode.

    I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.

    Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.

    Router log file (I changed the IP addresses > respectively as well as references to MAC addresses)

    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart > [44074]
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT > [44074] because it is admitted only after the phase 1.
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [4500]
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [44074]
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for > [44074]
    Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for > [4500] -> [44074] with spi =>.
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of > [44074]
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP >
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of > [44074]
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
    Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP >
    Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for > [4500] -> [44074] with spi =>

    The router configuration

    IKE policy

    VPN strategy

    Client configuration

    Hôte : < router="" ip=""> >

    Authentication group name: remote.com

    Password authentication of the Group: mysecretpassword

    Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)

    Username: myusername

    Password: mypassword

    Please contact Cisco.

    Correct, the RV180 is not compatible with the Cisco VPN Client.  The Iphone uses the Cisco VPN Client.

    You can use the PPTP on the RV180 server to connect a PPTP Client.

    In addition, it RV180 will allow an IPsec connection to third-party customers 3.  Greenbow and Shrew Soft are 2 commonly used clients.

  • AnyConnect + possible PSK (pre-shared key) as under with cisco vpn client ikev1 and ikev2

    Is it possible to create a VPN Anyconnect of RA with just the name of user and password + pre-shared key (Group) for the connection, as could do for ikev1 with cisco VPN client? I am running 8.4.X ASA code and looks like tunnel-group commands have 8.2.X somewhat change. If you change the group type of the tunnel for remote access, now there is no option for IKEv2 PSK. This is only available when you choose the type

    Type of TG_TEST FW1 (config) # tunnel - group?

    set up the mode commands/options:
    Site IPSec IPSec-l2l group
    Remote access using IPSec-IPSec-ra (DEPRECATED) group
    remote access remote access (IPSec and WebVPN) group
    WebVPN WebVPN Group (DEPRECATED)

    FW1(config-tunnel-General) # tunnel - group TG_TEST ipsec-attributes
    FW1(config-tunnel-IPSec) #?

    configuration of the tunnel-group commands:
    any required authorization request users to allow successfully in order to
    Connect (DEPRECATED)
    Allow chain issuing of the certificate
    output attribute tunnel-group IPSec configuration
    mode
    help help for group orders of tunnel configuration
    IKEv1 configure IKEv1
    ISAKMP policy configure ISAKMP
    not to remove a pair of attribute value
    by the peer-id-validate Validate identity of the peer using the peer
    certificate
    negotiation to Enable password update in RADIUS RADIUS with expiry
    authentication (DEPRECATED)

    FW1(config-tunnel-IPSec) # ikev1?

    the tunnel-group-ipsec mode commands/options:
    pre-shared key associate a key shared in advance with the connection policy

    I'm getting old so I hope that it is not in another complaint curmudgeonly on the loss of functionality. :)

    Many small businesses do not want to invest in the PKI. It is usually a pain to deploy, backup, make redundant, etc..

    But it would be nice to have a bit more security on VPN other than just the connections of username and password.

    If this is not possible, it is possible to configure the Anyconnect customer to IKEv1 with PSK and name at the level of the Group client?

    If this is not possible, WTH did cisco end customer VPN cisco as a choice of VPN connection (other than to get more fresh mail of license)?

    I really hope that something like this exists still!

    THX,

    WR

    You are welcome

    In addition to two factors, you can also do double authentication (ie the two using the user name and password). Each set of credentials can come from a Bank of different identities.

    With this scheme, you can can configure a local user name (common) with password on the SAA (think of it as your analog PSK) and the other be the AD user identification information.

  • CISCO ANYCONNECT VPN CISCO VPN CLIENT

    Hi, I was in the process of configuring cisco anyconnect vpn for ip phones to our local obtained the license for them either, the question that I get is that I already have remote configured cisco connect via the old cisco vpn client.

    now, if I activate the anyconnect ssl on the same outside the interface both can exist without conflict or maybe I need to migrate users to install the end customer for anyconnect system software to connect.

    I also need help with authentication of certification.

    concerning

    You can run both VPN at the same time without problems.

    However, you should try and migrate everyone to the latest technology Anyconnect SSL anyway.

  • RV120 VPN with full Cisco VPN Client?

    Is it possible to configure the RV120 for a VPN IPsec for use with the complete Cisco VPN client?

    I tried, but it does not appear to support "Goup of authentication.

    I see in the confi router I can put a PSK, but the complete VPN client seems only accecpt "Goup authentication."

    I managed on the basis for the work "Fast VPN", how it works is beyond me, because he does not appear to create an adapter with an IP address or anything on the local line, and I didn't even create a VPN policy...

    Or put another way, what alternative (Free) VPN clients are there to work with the RV120?

    Try the following link for instructions for Cisco VPN and the SA500:

    http://www.Cisco.com/en/us/docs/security/multi_function_security/multi_function_security_appliance/sa_500/TechNote/note/SA500_vpnclient_appnote.PDF

    I hope this helps.

    Thank you

    Rick Roe

    Cisco Small Business Support Center

  • Cisco VPN client (ASA) password expiry messages

    Hi all

    I am looking for a way to change the message displayed on the Cisco VPN client, when a password change is required. This configuration uses an ASA 5520 with Windows 2003 IAS radius for authentication server.

    I have configured the option 'password-management' under the tunnel-group, but when the password expires the vpn client prompts you to "enter a new pin code.

    This customizable message, for example "Please enter a new password to 8 characters etc.

    The original message communicates enough information for the user.

    Thank you

    Hi Matt,

    This is a known defect CSCeh13180 (when using RADIUS with expiry) and there is currently no plan to fix this bug.

    But you can try this for one of your VPN client and see if that helps.

    you need to change the VPNClient.ini on the PC that installed the VPN Client. Here are the settings you will need...

    [RadiusSDI]

    NewPinSubStr = "" enter the new password: ""

    HTH

    Kind regards

    JK

  • Unable to connect using the Cisco VPN client

    Hi all. I recently configured a 5510 ASA to allow remote access using the Cisco VPN client. The problem is that everything works fine when I connect using a modem classic or on a computer with a public address that I use for testing purposes, but whenever I try to connect with on an ADSL line, I can't access to the resources. I have connection and after that nothing, I can not achieve anything.

    I enclose the relevant configuration information in the attachment. Any help is welcome.

    Depending on the version, add...

    ISAKMP nat-traversal

    or

    ISAKMP nat-traversal crypto

    Should be all you need.

  • Cisco VPN client, PIX, and proxy

    Hi.I have problem in my company. We have users that go through a proxy server located in the DMZ of a PIX to the internet (allowed through the ACL of the DMZ on the outside, etc.). Which works very well.

    The problem arises when they use a Cisco VPN client to connect to another company, and they can no longer access the Internet, but may work via VPN to a remote site (client has been authorized by the Cisco PIX). Everything returns to normal when they no longer use the VPN client.

    Any ideas why this would happen?

    Without the proxy, browsing the internet via the vpn connection, or split tunnel is configured and you are leaving locally. If split tunnel is configured, the ip address of proxy server can overlap with the remote protected network.

    Fortunately, it is easy for you to know how the vpn is configured, just check the route details of vpn client statistics tab.

    Verify that the routing table local pc will also help you to solve this problem.

Maybe you are looking for

  • To change cell Mobile options

    I know that this is based on the language choose you... But why Apple dictates u language is chosen if based on the wording of the option? I choose my 'region' as 'Australia', but what is the different between the region and language of iPhone? I cha

  • More partition

    Hello world I HAVE HP DV7 WITH 750 GB HARD DRIVE AND I WANT TO DO MORE PARTITION AND I ALSO HAVE A RECOVERY DISK. CAN I MAKE MULTIPLE DRIVES 750 GB HARD DRIVE BY REINSTALLING THE RECOVERY DISK WINDOW. AND IF IT IS POSSIBLE, HOW? PLEASE EXPLAIN WITH G

  • How get/create my window recovery partition

    My 900 Elitepad had a problem with the touch screen while loading. I gave Hp support diagnostic Centre. They went before formatting my Tablet while diagnosis to find out where is the problem. At the end it got to know that the Elitepad 900 charger is

  • Acer to control brightness screen pass 12

    Sometimes I can't abdjust the brightness of the screen. The brightness level of the screen indicates the level of brightness change but the actual brightness of the screen remains the same. Auto brightness is turned off, of course. Sometimes he corre

  • Start Menu problem - another file opens when I select a file to open in the start menu

    original title: Start Menu problem I use windows Vista Home Edition.  The start menu is in Vista Mode.  When I select a file the third file above that that I select opens.  In classic mode, it works fine.  How can I fix it?